FVF-34W-L/Q / M-System Co.,Ltd. - Datasheet(PDF) Chat AI

FVF-34W-L/Q Datasheet with Chat AI

Hello, Please ask a question about FVF-34W-L/Q Datasheet

# Example questions: ➢ What is the maximum input voltage the fvf signal conditioner can handle, and what is the dielectric strength rating for a unit powered by 110v dc?
➢ What are the available options for coating and terminal screw material, and where can you find detailed specifications for these options?
➢ If you need a signal conditioner with an input range of 3-5ma dc, what would the complete model number be, assuming you also require a 24v dc power supply?

Part No.	FVF-34W-L/Q
Manufacturer	MSYSTEM
Size	108 Kbytes
Pages	4 pages
Description	Space-saving Plug-in Signal Conditioners F-UNIT

Datasheet Summary with AI

1. Overview & Model Number

️· Product: FVF Signal Conditioner
️· Model Number Format: `FVF-[1][2]-[3][4]` Each bracket represents a code to select specific options.

2. Ordering Information & Code Breakdown

️· [1] INPUT:
- Current Options: A, B, C, D, E, F, G, H, GW, FW, Z (These relate to input current range and resistance, detailed below).
- Voltage Options: 3, 4, 5 (These relate to input voltage range and resistance, detailed below).

️· [2] OUTPUT:
- Current Options: A, B, C, D, E, F, G, H, GW, FW, Z (These relate to output current range, detailed below).
- Voltage Options: 3, 4, 5 (These relate to output voltage range, detailed below).

️· [3] POWER:
- K: 170-264 V AC
- L: 170-264 V AC
- R: 24 V DC
- P: 110 V DC

️· [4] OPTIONS:
- Blank: No options
- /Q: Specifies additional options. Common choices include:
■ /C01: Silicone Coating
■ /C02: Polyurethane Coating
■ /C03: Rubber Coating
■ /S01: Stainless Steel Terminal Screw Material

3. Input and Output Specifications (Details for Codes)

️· INPUT (Codes A-G and 3-5):
- The 'Input' section determines the range and input resistance for signals entering the unit. Examples:
■ A: 4-20mA DC input, 250 ohm resistance
■ 3: 0-1V DC input, 1 MΩ resistance
- 'Z' allows for specifying a custom input range.

️· OUTPUT (Codes A-G and 3-5):
- The 'Output' section determines the signal range and current/voltage available for output.
- 'Z' allows for specifying a custom output range.

4. Power Supply Options:

️· K: 170-264 V AC
️· L: 170-264 V AC
️· R: 24 V DC
️· P: 110 V DC

5. General Specifications

️· Construction: Plug-in
️· Terminals: M3.5 screw terminals (0.8 Nm torque)
️· Housing: Flame-resistant resin
️· Isolation: Input to Output to Power
️· Ranges: Overrange output of +/- 120% of span.
️· Adjustments: Zero and Span adjustments on the front panel.
️· Temperature: Operating: -5 to +55°C (23 to 131°F)
️· Humidity: 30-90% RH (non-condensing)
️· Weight: 180g
️· Accuracy: ±0.1%
️· Response Time: 180 microseconds.
️· Dielectric Strength: 1000V AC, 2000V AC, 1500V AC (depending on the power input code)

6. Important Notes:

️· Shielded Cables: Use shielded twisted-pair cables to minimize noise interference.
️· External Power: The unit requires external power as per the chosen code (K, L, R, or P).