1. Product Overview:

️· Product: KSF Signal Conditioner
️· Function: Converts a range of current or voltage signals into a standard output (current or voltage).
️· Ordering Information: `KSF-[1][2]-[3][4]`
- `[1]` Input Type (Current or Voltage)
- `[2]` Input Range
- `[3]` Output Type (Current or Voltage)
- `[4]` Options (e.g., /Q for option code, /C01/S01)

2. Input Options ([1]):

️· Current Inputs:
- A: 4 – 20 mA DC (Input resistance 250 Ω)
- B: 2 – 10 mA DC (Input resistance 500 Ω)
- C: 1 – 5 mA DC (Input resistance 500 Ω)
- D: 0 – 20 mA DC (Input resistance 50 Ω)
- E: 0 – 16 mA DC (Input resistance 62.5 Ω)
- F: 0 – 10 mA DC (Input resistance 100 Ω)
- G: 0 – 1 mA DC (Input resistance 1000 Ω)
- H: 10 – 50 mA DC (Input resistance 100 Ω)
- GW: -1 – +1 mA DC (Input resistance 1000 Ω)
- FW: -10 – +10 mA DC (Input resistance 100 Ω)
- Z: Specify current (See Input Specifications)
️· Voltage Inputs:
- 3: 0 – 1 V DC (Input resistance 1 MΩ min.)
- 4: 0 – 10 V DC (Input resistance 1 MΩ min.)
- 5: 0 – 5 V DC (Input resistance 1 MΩ min.)

3. Output Options ([3]):

*(Not explicitly listed in the document. Assuming standard current or voltage outputs based on the 'Ordering Information' section)*

4. Option Codes ([4]):

️· `/Q`: Indicates a special option, further specification needed.
️· `/C01`: Option code - detail unspecified in document
️· `/S01`: Option code - detail unspecified in document

5. General Specifications:

️· Construction: Plug-in
️· Connections: M3.5 screw terminals
️· Housing Material: Flame-resistant resin (black)
️· Isolation: Input to output to power
️· Overrange Output: Approximately -10% to +120% of span
️· Adjustment: Zero adjustment (-5% to +5%) and span adjustment (95% to 105%) on front panel.

6. Performance:

️· Accuracy: ±0.1%
️· Temperature Coefficient: ±0.02%/°C (±0.01%/°F)
️· Response Time: ≤ 500 μsec (0 – 90%)
️· Line Voltage Effect: ±0.1% over voltage range
️· Insulation Resistance: ≥ 100 MΩ with 500 V DC
️· Dielectric Strength: 1000 V AC @1 minute (input to output to power) / 2000 V AC @1 minute (input or output to ground)

7. Installation and Environment:

️· Mounting: Surface or DIN rail
️· Weight: 400 g (0.88 lb)
️· Operating Temperature: -5 to +55°C (23 to 131°F)
️· Operating Humidity: 30 to 90% RH (non-condensing)

8. Important Notes:

️· Input Resistance: Different input types have varying input resistance values (see list above).
️· Noise: The signal conditioner doesn't eliminate noise. Use shielded twisted-pair cables.
️· Customization: The `/Z` input code allows for specifying custom input ranges.