postpone

1. Product Identification & Overview

️· Product: 5016-Series Fiber Transceiver
️· Type: Optical Transceiver
️· Manufacturer: Ortel (a division of EMCORE)
️· Compliance: Complies with 21 CFR 1040.10 and 1040.11 (US regulations).
️· Laser Classification: Class IIIb Laser Product

2. Laser Safety Information

️· Warning: Use of controls and procedures outside of specifications can result in hazardous laser radiation exposure.
️· Danger: Invisible Laser Radiation is emitted.
️· Wavelength: 1.3 µm (micrometers)
️· Maximum Power: 30 mW (milliwatts)
️· Safety Labeling: Laser safety label is not on the module, but attached to the shipping carton.
️· Important Note: Product is not shipped with a power supply.

3. Ordering Information

️· Options:
- -020: FC/APC Bulkhead Optical Connector
- -022: FC/APC Optical Connector / 3mm Fiber Pigtail

4. Electrical/Optical Characteristics (Summary Table)

Parameter	5016A	5016B	5016C	5016D	Unit
Upper Band Edge Frequency	4	10	15	18	GHz
Lower Band Edge Frequency	0.1	0.1	0.1	0.1	GHz
Insertion Loss (0 dB Optical)	28	28	28	34	dB
Amplitude Flatness	± 1.5	± 2.0	± 2.5	± 3.0	dB
Input 1 dB Compression	+20	+20	+20	+20	dBm
Input Third Order Intercept (Range Specific)	35	30	-	-	dBm
Fiber	Single Mode	Single Mode	Single Mode	Single Mode	µm
Optical Transmitter Output Power	8 (+9)	2 (+3)	5 (+7)	-	mW (dBm)
Optical Receiver Input Power	-	-	-	2 (+3)	mW (dBm)
Noise Figure	46	51	57	-	dB
Input/Output RF Return Loss	9.5	9.5	6	6	dB

5. Mechanical/Physical Specifications

️· Connectors: SMA (for RF) & FC/APC (Optical)
️· Pinout (D-Sub Connector):
- Pin 1: +15 Vdc
- Pin 2: +5 Vdc
- Pin 3: NC (Not Connected)
- Pin 4: Power Ground
- Pin 5: Reference Ground
- Pin 6: Laser Photodiode Current Monitor (1V/100mA)
- Pin 7: Received Optical Power (1V/mA)
- Pin 8: Laser Current Monitor (1V/100mA)
- Pin 9: Laser Over-temperature Alarm

6. Contact Information

️· Website: www.emcore.com
️· Phone: 626-293-3400
️· Fax: 626-293-3423
️· Address: 2015 West Chestnut Street, Alhambra, California 91803-1542

Additional Notes:

️· The document mentions different ranges and power outputs based on the 5016 model (A, B, C, D).
️· Alarm circuits are open-collector outputs capable of sinking 20mA.
️· Technical data is subject to change without notice.