1. Part Identification and General Information:

️· Manufacturer: Allied Components International
️· Contact Information: 714-665-1140, www.alliedcomponents.com
️· Revision Date: October 1, 2010 (10/01/10)
️· Important Note: "All specifications subject to change without notice." This means the details can be updated.

2. Electrical Characteristics:

️· Rated Current: Inductance decreases by less than 10% at the rated current. This is an important specification to ensure the inductor doesn't significantly lose its intended value when operating at its maximum specified current.
️· Tolerance: The inductance value is within ±10% of its nominal (stated) value. Tighter tolerances are available (presumably at extra cost).
️· Shielding: Less than 5% coupling (electromagnetic interference between inductors when placed side by side) at 1 kHz. This indicates good shielding performance.
️· Test Equipment/Procedures: Specifies the HP and CH equipment models used to measure inductance (L), quality factor (Q), DC resistance (DCR), and self-resonant frequency (SRF).
️· Operating Temperature: -55°C to +125°C. This is the temperature range within which the inductor can reliably operate.

3. Physical Characteristics & Packaging:

️· Marking: Identified by a 5-band color code according to MIL-C-15305 (a military standard for wire and windings).
️· Reel Marking: Includes manufacturer's name, part number, customer's part number, invoice number, and a lot/data code.
️· Packaging:
- Bulk: 500 inductors per bag.
- Tape & Reel: 2500 inductors per reel. The "-TR" suffix is added to the part number to indicate tape & reel packaging.

4. Design and Standards Compliance

️· Design: Designed to meet MIL-C-15305 Grade 1, Class B. This implies it has been engineered and tested to a specific military standard.



Key Takeaways & Potential Use Cases

️· Military/Aerospace Applications: The compliance with MIL-C-15305 suggests suitability for military and aerospace applications.
️· General Electronics: While suitable for military applications, these inductors would also be used in various general electronics applications where inductance, shielding, and temperature tolerance are important.
️· Shielded Inductor: The low coupling (good shielding) makes these suitable for noisy environments where electromagnetic interference needs to be minimized.