Overall Document Purpose:

This document is a specification sheet for a Murata component (likely a resonator or filter). It details its electrical and mechanical characteristics, manufacturing processes, reliability testing, and cleaning instructions.

1. Component Testing and Reliability Procedures

️· Environmental Tests: Components undergo various environmental tests, including:
- Temperature Cycling
- Humidity Testing
- Vibration Testing
- Shock Testing
- Temperature Storage
️· Electrical Tests: Electrical parameters are measured under various conditions to ensure compliance with specifications.

2. Manufacturing and Handling

️· Lead Free: The component is manufactured using lead-free processes.
️· Packaging: Specific packaging details are provided (refer to the detailed tables on pages 12-13 for dimensions, tolerances, and markings).
️· Handling Precautions: Standard precautions for handling electronic components apply.
️· Surface Finish: Tin plating is specified.

3. Electrical Characteristics (Key Items – more detail in tables):

️· Frequency Range: The specification mentions 2.00～2.99MHz and 3.00～10.0MHz. These are likely the operating frequency ranges for different variations of the component.
️· Dimensions: Detailed dimensions (t1, t2, etc.) are provided in tables (pages 12-13), indicating different values depending on the frequency range.
️· Lead Length: Lead length is also specified.

4. Cleaning Instructions (Table 2: Washability)

️· Acceptable Cleaning Solvents:
- HCFC (Hydrochlorofluorocarbon)
- IPA (Isopropyl Alcohol)
- Tap Water
- Demineralized Water
- Cleanthrough 750H
- Pine alpha 100S
- Techno care FRW
️· Temperature Difference (ΔT): The temperature difference between the component and the cleaning solvent must be ≤ 60°C.
️· Cleaning Methods:
- Ultrasonic Cleaning: Frequency 28 kHz, Output 20 W/L, max 1 minute.
- Immersion Cleaning: Max 5 minutes at ≤ 60°C.
- Shower/Rinse Cleaning: Max 5 minutes at ≤ 60°C.
- Drying: Air blow at ≤ 80°C for 1-5 minutes.
️· Important Note: Avoid chlorine, petroleum, or alkali cleaning solvents, as they can damage the component.

5. Packaging Information (Pages 12-13 - Tables)

️· Details on packaging quantity, dimensions, and markings are provided.

Important Considerations and Notes:

️· Refer to Detailed Tables: The tables on pages 12-13 are critical for detailed dimensions, tolerances, and packaging information.
️· Application Circuit: The document emphasizes the importance of thoroughly evaluating the component's performance in the target application circuit.
️· Solvent Restrictions: Carefully follow the cleaning solvent restrictions to prevent damage.