ASPI-0418FS-101 / Abracon Corporation - Datasheet(PDF) Chat AI

ASPI-0418FS-101 Datasheet with Chat AI

Hello, Please ask a question about ASPI-0418FS-101 Datasheet

# Example questions: ➢ What is the tolerance range for inductors with inductance codes 'n' and 'm' as specified in the document?
➢ What are the key test conditions used to measure the inductance and dc resistance (dcr) of these inductors?
➢ For an inductor with a value of 6.8µh, what are the typical saturation current (isat) and rms current (irms) values according to the datasheet?

Part No.	ASPI-0418FS-101
Manufacturer	ABRACON
Size	1Mb
Pages	3 pages
Description	LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR

Datasheet Summary with AI

1. Product Description:

️· Product: ASPI-0418FS series of shielded power inductors.
️· Application: Designed for various applications (commercial, industrial, automotive) but *not* suitable for life-critical or extreme reliability scenarios without specific approval.

2. Electrical Characteristics (Table):

The document provides a table detailing the electrical specifications for various inductance values within the ASPI-0418FS series:

Inductance (µH) RDC (mΩ) Saturation Current (A) Temperature Rise Current (A)

0.82

1.5

2.2 37 3.00 2.90

2.7 43 2.40 2.30

3.3 55 2.30 2.20

4.7 70 2.00 1.90

6.8 98 1.60 1.50

10 150 1.40 1.30

15 220 1.10 1.00

22 290 0.95 0.90

33 460 0.75 0.70

47 650 0.62 0.60

68 940 0.50 0.50

100 1330 0.45 0.42

150 2000 0.35 0.32

220 2960 0.30 0.28

️· RDC: DC Resistance (in milliohms)
️· Saturation Current: The current at which the inductance drops by 30%.
️· Temperature Rise Current: The current that causes a 40°C rise in the inductor's temperature.

3. Test Conditions:

️· Inductance measured using an HP-4285A Precision LCR Meter.
️· RDC measured using a DU-5011 milli-ohm meter.
️· Isat determined by inductance drop (30%).
️· Irms determined by temperature rise (40°C).
️· Test Frequency: 100 kHz, 1Vrms.

4. Part Identification/Options:

️· Code: Indicates the inductance value (e.g., ASPI-0418FS-2R2).
️· Tolerance: "M" indicates a tolerance of ±20%. Some values have "N" which signifies a tolerance of +/- 30%.
️· Packaging: "T3" indicates Tape and Reel packaging (3000 pieces per reel).

5. Mechanical Dimensions:

The document includes outlines and dimensions for reference. Dimensions are also specified for "C Max."

️· A: 4.0 ± 0.2
️· B: 4.0 ± 0.2
️· C Max: Specified differently based on the inductance value. (e.g. 1.88 for 2.2uH, 1.80 for 3.3uH)
️· D: 1.3

6. Tape and Reel Dimensions:

️· Ao: 4.50
️· Bo: 4.35
️· Ko: 1.90
️· W: 12
️· P: 8
️· T: 0.3

7. Important Notes & Disclaimers:

️· The inductors are *not* intended for life-critical or high-reliability applications without proper qualification.
️· Refer to Abracon for specific use cases and qualifications.

Inductance (µH)	RDC (mΩ)	Saturation Current (A)	Temperature Rise Current (A)
0.82
1.5
2.2	37	3.00	2.90
2.7	43	2.40	2.30
3.3	55	2.30	2.20
4.7	70	2.00	1.90
6.8	98	1.60	1.50
10	150	1.40	1.30
15	220	1.10	1.00
22	290	0.95	0.90
33	460	0.75	0.70
47	650	0.62	0.60
68	940	0.50	0.50
100	1330	0.45	0.42
150	2000	0.35	0.32
220	2960	0.30	0.28