| Electronic Components Datasheet Search |
|
The question interval is too short.
Please try again in a few seconds.
Hello, Please ask a question about MLPNC-7100S1 Datasheet
# Example questions:
➢ What are the supported input frequency ranges for the mlpnc-7100s1 nltl comb generator?
➢ What is macom's stance on using their products in medical or life-sustaining applications?
➢ What are the two package options available for the mlpnc-7100s1, and how does the documentation present performance data for each?
1. General Product Information
️· Product Name: MLPNC-7100S1 NLTL Comb Generator
️· Revision: Rev. V2
️· Type: Nonlinear Loop Transistor (NLTL) – generates multiple harmonics from an input signal. Used in signal generation, frequency synthesis, and test equipment.
️· Package Options:
- SMA (Surface Mount Array)
- SMT580 (Surface Mount Technology 580)
- SMA800, Hermetic
2. Key Features & Specifications
️· Operating Frequency: Not explicitly stated, but the performance curves cover frequencies of 75MHz, 100MHz, and 250MHz.
️· Harmonic Generation: Generates multiples of the input frequency.
️· Temperature Range: Not explicitly stated, but the "Typical Performance Curves over temperature" implies testing was done at +25°C.
️· Input Power: Ranges from 18 dBm to 24 dBm depending on the curve being observed.
3. Absolute Maximum Ratings
️· These ratings should *not* be sustained during operation. Exceeding them can cause permanent damage. Specific values are not listed, but the datasheet emphasizes caution.
4. Performance Curves (Summarized)
The datasheets contain several performance curves for different frequency ranges and input power levels. Here's a summary of what they show:
️· 75 MHz, 100 MHz, 250 MHz Input Frequency Curves: These plots showcase the output harmonic levels at different frequencies.
️· Phase Noise: A curve demonstrates the phase noise characteristics at 100 MHz input. This indicates the stability and purity of the generated signals.
️· Temperature Variation Curves: Data showing harmonic output performance at varying temperatures for 75MHz, 100MHz and 250 MHz input frequencies.
5. Package Information
️· SMA Package: Standard surface mount package.
️· SMT580: Smaller footprint surface mount technology package. The datasheet provides an outline drawing.
️· SMA800, Hermetic: A sealed, hermetically protected package. The datasheet provides an outline drawing.
6. Important Notes & Disclaimers
️· MACOM's Rights: MACOM reserves the right to make changes to the product or information without notice.
️· No Warranty: The data is provided “as is” with no warranties, express or implied.
️· Intended Use: MACOM products are not intended for use in life-sustaining applications.
️· Support: For additional information or support, refer to the MACOM website.
1. General Product Information
️· Product Name: MLPNC-7100S1 NLTL Comb Generator
️· Revision: Rev. V2
️· Type: Nonlinear Loop Transistor (NLTL) – generates multiple harmonics from an input signal. Used in signal generation, frequency synthesis, and test equipment.
️· Package Options:
- SMA (Surface Mount Array)
- SMT580 (Surface Mount Technology 580)
- SMA800, Hermetic
2. Key Features & Specifications
️· Operating Frequency: Not explicitly stated, but the performance curves cover frequencies of 75MHz, 100MHz, and 250MHz.
️· Harmonic Generation: Generates multiples of the input frequency.
️· Temperature Range: Not explicitly stated, but the "Typical Performance Curves over temperature" implies testing was done at +25°C.
️· Input Power: Ranges from 18 dBm to 24 dBm depending on the curve being observed.
3. Absolute Maximum Ratings
️· These ratings should *not* be sustained during operation. Exceeding them can cause permanent damage. Specific values are not listed, but the datasheet emphasizes caution.
4. Performance Curves (Summarized)
The datasheets contain several performance curves for different frequency ranges and input power levels. Here's a summary of what they show:
️· 75 MHz, 100 MHz, 250 MHz Input Frequency Curves: These plots showcase the output harmonic levels at different frequencies.
️· Phase Noise: A curve demonstrates the phase noise characteristics at 100 MHz input. This indicates the stability and purity of the generated signals.
️· Temperature Variation Curves: Data showing harmonic output performance at varying temperatures for 75MHz, 100MHz and 250 MHz input frequencies.
5. Package Information
️· SMA Package: Standard surface mount package.
️· SMT580: Smaller footprint surface mount technology package. The datasheet provides an outline drawing.
️· SMA800, Hermetic: A sealed, hermetically protected package. The datasheet provides an outline drawing.
6. Important Notes & Disclaimers
️· MACOM's Rights: MACOM reserves the right to make changes to the product or information without notice.
️· No Warranty: The data is provided “as is” with no warranties, express or implied.
️· Intended Use: MACOM products are not intended for use in life-sustaining applications.
️· Support: For additional information or support, refer to the MACOM website.
| Part No. | MLPNC-7100S1 |
| Manufacturer | MA-COM |
| Size | 730 Kbytes |
| Pages | 9 pages |
| Description | NLTL Comb Generator |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |