CCT-38SX60-RMS / Teledyne Technologies Incorporated

CCT-38SX60-RMS Datasheet with Chat AI

Hello, Please ask a question about CCT-38SX60-RMS Datasheet

# Example questions: ➢ What is the frequency range for which insertion loss performance curves are typically provided?
➢ What type of coaxial switch is detailed in this document (e.g., spdt, sp4t, etc.), and how many throw configurations are explicitly shown through truth tables (e.g., 3p6t, 4p6t)?
➢ What does this likely refer to in terms of rf performance?

Part No.	CCT-38SX60-RMS
Manufacturer	TELEDYNE
Size	926 Kbytes
Pages	14 pages
Description	Normally Open Coaxial Switch

Datasheet Summary with AI

# CCT-38S/CT-38S Coaxial Switch Series

## Overview
A broadband, multi-throw electromechanical coaxial switch designed to switch microwave signals from a common input to 3, 4, 5, or 6 outputs. Characteristic impedance is 50 Ohms. Switches are available in normally open configurations.

## Key Features
️· Frequency Range:
- CCT-38S: DC – 18 GHz
- CT-38S: DC – 22 GHz
️· Number of Throws: Available in SP3T, SP4T, SP5T, and SP6T configurations
️· Internally Terminated: Unselected ports are internally terminated with 50 Ohm matched loads.
️· Compact Size: Popular connector spacing on a 1.062” diameter circle.
️· Actuator Options: Various actuator voltages available (12, 15, 24, 28 VDC). TTL drivers, diodes, decoders, and moisture seals are also available.

## Performance Characteristics (Typical)
️· Insertion Loss: Varies with frequency, ranging from 0.1 dB to 0.4 dB
️· Isolation: Minimum 70 dB (20-22 GHz) to 80 dB (DC-8 GHz) depending on frequency.
️· VSWR: Maximum 1.05:1 (DC-4 GHz) to 1.2:1 (8-22 GHz)

## Connector Options
️· SMA Female
️· D-Sub (9 or 15 pin)

## Part Numbering System
CCT-38 S 1 6 C - T
️· CCT-38: Series
️· S: SMA female connector
️· 1: Actuator Voltage (e.g., 1 = 28 VDC)
️· 6: Number of throws (e.g. 6 = SP6T)
️· C: Indicator Contacts
️· T: TTL Drivers with Diodes

## Additional Options
️· Moisture Seal
️· Decoder & TTL Drivers
️· Positive + Common
️· No Indicator Contacts

## Mechanical Outline
️· Solder terminals with a maximum solder temperature of 250°C for 5 seconds.
️· Indicator and D-Sub model height: 1.85 std.
️· All other model height: 2.50.