| Manufacturer | Part # | Datasheet | Description |
Allegro MicroSystems
|
A6213 |
641Kb/17P |
The A6213 is a single IC switching regulator that provides constant-current output to drive high-power LEDs. |
| A6266 |
338Kb/17P |
The A6266 is a boost converter controller, providing a programmable constant current output for driving high power LEDs in series. |
| A4491 |
399Kb/16P |
Designed to provide the power supply requirements of printers, office automation, industrial, and portable equipment, the A4491 provides three high current, |
| A4490 |
397Kb/17P |
Designed to provide the power supply requirements of printers, office automation, industrial, and portable equipment, the A4490 provides three high current, |
| A4935 |
452Kb/25P |
The A4935 is a 3-phase controller for use with N-channel external power MOSFETs and is specifically designed for automotive applications. |
| A6267 |
349Kb/17P |
The A6267 is a DC-to-DC converter controller, providing a programmable constant current output for driving high power LEDs in series. |
| A6268 |
369Kb/19P |
The A6268 is a DC-to-DC converter controller, providing a programmable constant current output for driving high power LEDs in series. |
| A6265 |
349Kb/17P |
The A6265 is a DC-to-DC converter controller, providing a programmable constant current output for driving high power LEDs in series. |
| A4933 |
455Kb/25P |
The A4933 is a 3-phase controller for use with N-channel external power MOSFETs and is specifically designed for automotive applications. |
| A8731 |
466Kb/16P |
The Allegro A8731 Xenon photoflash charger IC is designed to meet the needs of ultra-low power, small form factor cameras, particularly camera-phones. |
| A4401 |
417Kb/17P |
This device provides all the necessary control functions to provide the power rails for driving a vacuum fluorescent display (VFD) using minimal external components. |
| A4492 |
355Kb/16P |
Designed to provide the power supply requirements for automotive applications, the A4492 provides three high current, high performance, switching regulator outputs with independent soft start. |
| A8600 |
2Mb/52P |
Designed to provide the power supply requirements of next generation car audio and infotainment systems, the A8600 provides all the control and protection circuitry to produce... |
| ATS636LSE |
348Kb/15P |
The ATS636LSE programmable, true power-on state (TPOS), device is optimized Hall-effect IC and rare-earth pellet combinations that switch in response to magnetic signals... |
| A4960 |
599Kb/34P |
The A4960 is a three-phase, sensorless, brushless DC (BLDC) motor controller for use with external N-channel power MOSFETs and is specifically designed for automotive applications. |
| A4938 |
248Kb/10P |
The A4938 is a complete 3-phase brushless DC (BLDC) motor pre-driver, supplying direct, high-current gate drive of an all N-channel power MOSFET 3-phase bridge. |
| A4989 |
497Kb/17P |
The A4989 is a dual full-bridge gate driver with integrated microstepping translator suitable for driving a wide range of higher power industrial bipolar 2-phase stepper motors (typically 30 to 500 W). |
| A4407 |
1Mb/29P |
The A4407 is an automotive power management IC that uses a 2.2 MHz constant on-time (COT) buck pre-regulator to supply a 5 V linear regulator, a 5 V tracking/protected linear regulator, |
| A4406 |
1Mb/27P |
The A4406 is an automotive power management IC that uses a high frequency constant on-time 5.45 V pre-regulator to supply an internal 5 V linear regulator and a 3.3 V linear DMOS driver. |
| A4405 |
1Mb/27P |
The A4405 is an automotive power management IC that uses a high frequency constant on-time 5.45 V pre-regulator to supply two internal 5 V linear regulators and a 3.3 V linear DMOS driver. |
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand
