ST72334J2TASLASHXXX datasheet(116/150 Pages) STMICROELECTRONICS

116 / 150 page

ST72334xx-Auto, ST72314xx-Auto, ST72124Jx-Auto

116/150

SUPPLY CURRENT CHARACTERISTICS (Cont’d)

15.4.3 Halt and Active Halt Modes

15.4.4 Supply and Clock Managers

The previous current consumption specified for

the ST7 functional operating modes over tempera-

ture range does not take into account the clock

source current consumption. To get the total de-

vice consumption, the two current values must be

added (except for Halt mode).

15.4.5 On-Chip Peripherals

Notes:

1. Typical data is based on TA=25°C.

2. All I/O pins in input mode with a static value at VDD or VSS (no load), CSS and LVD disabled. Data based on charac-

terization results, tested in production at VDD max. and fCPU max.

3. Data based on design simulation and/or technology characteristics, not tested in production. All I/O pins in input mode

with a static value at VDD or VSS (no load); clock input (OSC1) driven by external square wave, LVD disabled.

4. Data based on characterization results, not tested in production.

5. Data based on characterization results done with the external components specified in Section 15.5.3 and Section

15.5.4, not tested in production.

6. As the oscillator is based on a current source, the consumption does not depend on the voltage.

7. Data based on a differential IDD measurement between reset configuration (timer counter running at fCPU/4) and timer

counter stopped (selecting external clock capability). Data valid for one timer.

8. Data based on a differential IDD measurement between reset configuration and a permanent SPI master communica-

tion (data sent equal to 55h).

9. Data based on a differential IDD measurement between reset configuration and continuous A/D conversions.

Symbol

Parameter

Conditions

Typ 1)

Max

Unit

IDD

Supply current in Halt mode 2)

VDD=5.5V

-40°C

≤T

A≤+85°C

µA

-40°C

≤T

A≤+125°C

150

VDD=3.6V

-40°C

≤T

A≤+85°C

-40°C

≤T

A≤+125°C

100

Supply current in Active Halt mode 3)

150

Symbol

Parameter

Conditions

Typ 1)

Max 4)

Unit

IDD(CK)

Supply current of internal RC oscillator

500

750

µA

Supply current of external RC oscillator 5)

525

750

Supply current of resonator oscillator 5) & 6)

LP: Low power oscillator

MP: Medium power oscillator

MS: Medium speed oscillator

HS: High speed oscillator

200

300

450

700

400

550

750

1000

Clock security system supply current

150

350

IDD(LVD)

LVD supply current

Halt mode

100

150

Symbol

Parameter

Conditions

Typ

Unit

IDD(TIM)

16-bit Timer supply current 7)

fCPU=8MHz

VDD=3.4V

µA

VDD=5.0V

150

IDD(SPI)

SPI supply current 8)

fCPU=8MHz

VDD=3.4V

250

VDD=5.0V

350

IDD(ADC)

ADC supply current when converting 9)

fADC=4MHz

VDD=3.4V

800

VDD=5.0V

1100

ST72334J2TA/XXX Datasheet(PDF) 116 Page - STMicroelectronics

ST72334J2TA/XXX Datasheet(HTML) 116 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL