H8SXSLASH1663R datasheet(1039/1504 Pages) RENESAS

1039 / 1504 page

Section 20 USB Function Module (USB)

Rev. 2.00 Sep. 24, 2008 Page 1007 of 1468

REJ09B0412-0200

(3)

Transition from Suspend State to Software Standby Mode and Canceling Software

Standby Mode

If the USB bus enters from the suspend state to software standby mode, perform the operation as

shown in figure 20.6. When canceling software standby mode, ensure enough time for the system

clock oscillation to be settled.

Transition from suspend state to

software standby mode

(1)

(2)

(3)

(4)

(5)

(6)

(7)

Detect that USB bus is in suspend state

Set SURSF in IFR2 to 1

USBINTN interrupt

Clear SURSF in IFR2 to 0

Check if SURSS in IFR2 is set to 1

Clear SURSE in IER2 to 0

Set SSRSME in IER2 to 1

Shift to software standby mode

(execute SLEEP instruction)

Stop all clocks of LSI

Canceling software standby mode

Detect that USB bus is in resume state

RESUME interrupt

Cancel software standby mode

Wait for system clock oscillation to be settled

Clear SURSF in IFR2 to 0

Check if SURSS in IFR2 is cleared to 0

Set SURSE in IER2 to 1

Clear SSRSME in IER2 to 0

USB communications can be resumed

through USB registers

Denotation of figures

: Operation by firmware setting

: Automatic operation by LSI hardware

(8)

(9)

(10)

(11)

(12)

Figure 20.6 Flow of Transition to and Canceling Software Standby Mode

H8SX/1663R Datasheet(PDF) 1039 Page - Renesas Technology Corp

H8SX/1663R Datasheet(HTML) 1039 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL