| Electronic Components Datasheet Search |
|
H8SX/1663R Datasheet(PDF) 1394 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8SX/1663R Datasheet(HTML) 1394 Page - Renesas Technology Corp |
|
1394 / 1504 page ![]() Section 30 Electrical Characteristics Rev. 2.00 Sep. 24, 2008 Page 1362 of 1468 REJ09B0412-0200 Item Symbol Min. Typ. Max. Unit Test Conditions During A/D and D/A conversion 0.5 1.0 mA Reference power supply current Standby for A/D and D/A conversion AI CC 0.5 1.0 µA RAM standby voltage V RAM 2.5 V Vcc start voltage* 6 V ccSTART 0.8 V Vcc rising gradient* 6 SV CC 20 ms/V Notes: 1. When the A/D and D/A converters are not used, the AV CC, Vref, and AVSS pins should not be open. Connect the AV CC and Vref pins to VCC, and the AVSS pin to VSS. 2. Current consumption values are for V IHmin = Vcc − 0.5 V and VILmax = 0.5 V with all output pins unloaded and all input pull-up MOS in the off state. 3. The values are for V RAM ≤ VCC < 3.0 V, VIHmin = VCC × 0.9, and VILmax = 0.3 V. 4. I CC depends on f as follows: I CCmax = 30 (mA) + 1.1 (mA/MHz) × f (normal operation) I CCmax = 35 (mA) + 0.5 (mA/MHz) × f (sleep mode) 5. The values are for reference. 6. This can be applied at power-on. 7. The value when TM 32K halted. Table 30.3 Permissible Output Currents Conditions: V CC = PLLVCC = DrVCC = 30 V to 3.6 V, AVCC = 3.0 V to 3.6 V, Vref = 3.0 V to AVCC, V SS = PLLVSS = DrVSS = AVSS = 0 V*, Ta = –20°C to +75°C (regular specifications), T a = –40°C to +85°C (wide-range specifications) Item Symbol Min. Typ. Max. Unit Permissible output low current (per pin) Output pins except port 3 I OL 2.0 mA Permissible output low current (per pin) Port 3 I OL 10 mA Permissible output low current (total) Total of all output pins ΣI OL 80 mA Permissible output high current (per pin) All output pins –I OH 2.0 mA Permissible output high current (total) Total of all output pins Σ–I OH 40 mA Caution: To protect the LSI's reliability, do not exceed the output current values in table 30.3. Note: * When the A/D and D/A converters are not used, the AV CC, Vref, and AVSS pins should not be open. Connect the AV CC and Vref pins to VCC, and the AVSS pin to VSS. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |