75N75G-TQ2-R
AI

The **75N75G-TQ2-R** is a specific part number for a high-power N-channel enhancement mode MOSFET. This component is widely used in power management and switching applications due to its high current handling and low "on-resistance."
---
## 1. Part Number Breakdown
The naming convention usually follows the standard industrial format for power MOSFETs:
| Segment | Meaning | Details |
| :--- | :--- | :--- |
| **75** | Current Rating | Approximately 75 Amperes ($I_D$) |
| **N** | Channel Type | N-Channel MOSFET |
| **75** | Voltage Rating | 75 Volts ($V_{DSS}$) |
| **G** | Halogen Free | Green/RoHS compliant material |
| **TQ2** | Package Type | TO-263 (D2PAK) surface mount |
| **R** | Packing | Tape & Reel |
---
## 2. Technical Specifications
Below are the typical electrical characteristics for this MOSFET:
### Electrical Ratings
| Parameter | Symbol | Value |
| :--- | :--- | :--- |
| Drain-Source Voltage | $V_{DSS}$ | 75 V |
| Gate-Source Voltage | $V_{GSS}$ | ±20 V |
| Continuous Drain Current | $I_D$ | 75 A |
| Static Drain-Source On-Resistance | $R_{DS(on)}$ | ~11 mΩ (typical) |
| Total Gate Charge | $Q_g$ | ~115 nC |
### Physical Properties
* **Package:** TO-263 (also known as D2PAK). This is a surface-mount package designed for high power and low thermal resistance.
* **Mounting Type:** SMD/SMT (Surface Mount Technology).
---
## 3. Pin Configuration
The TO-263 package typically follows this standard layout:
1. **Gate (G):** Controls the "on/off" state of the MOSFET.
2. **Drain (D):** Connected to the metal tab on the back for heat dissipation.
3. **Source (S):** Connected to the ground or the negative side of the load.
---
## 4. Key Applications
Because of its high current capacity and low resistance, the 75N75G is found in:
* **Motor Controllers:** PWM speed control for DC motors.
* **DC-DC Converters:** High-efficiency power conversion.
* **Uninterruptible Power Supplies (UPS):** Switching stages for battery backup.
* **Inverters:** Converting DC battery power to AC power.
* **Battery Protection:** High-current disconnect switches.
---
## 5. Equivalent/Alternative Parts
If this specific UTC (Unisonic Technologies) part is unavailable, common equivalents include:
* **IRFB3077** (Higher performance)
* **STP75N75** (Standard through-hole equivalent)
* **HUFA75545P3**
- ⤷
What are the thermal management requirements for a 75A MOSFET in a TO-263 package?
- ⤷ How does the gate-source threshold voltage affect its use with microcontrollers?
- ⤷ Can this MOSFET be used in high-frequency switching applications above 100kHz?