CSTCE12M2G55Z-R0
AI

The **CSTCE12M2G55Z-R0** is a specific surface-mount ceramic resonator manufactured by **Murata Electronics**. It belongs to the CERALOCK® family, which is widely used as a cost-effective alternative to quartz crystals for timing and clock generation in microcontrollers.
---
## 1. Technical Specifications
The following table summarizes the key electrical and physical parameters of this component:
| Parameter | Specification |
| :--- | :--- |
| **Oscillation Frequency** | 12.000 MHz |
| **Frequency Tolerance** | ±0.5% |
| **Frequency Stability** | ±0.3% |
| **Built-in Capacitance** | 33 pF (Internal) |
| **Operating Temperature** | -40°C to +125°C |
| **Package Type** | SMD (Small Cap Chip Type) |
| **Dimensions** | 3.2mm x 1.3mm |
| **Mounting Type** | Surface Mount (SMT) |
---
## 2. Key Internal Components
The CSTCE series is unique because it integrates several passive elements into a single miniature package:
### A. Piezoelectric Ceramic Element
The core is a ceramic plate that exhibits the piezoelectric effect. When an electrical signal is applied, it vibrates at a specific resonant frequency (12 MHz). Ceramic resonators have a faster "start-up" time compared to quartz crystals.
### B. Built-in Load Capacitors
Unlike traditional 2-pin crystals that require external capacitors (C1 and C2) to stabilize the oscillation, the **CSTCE** series features three terminals. The middle terminal is grounded, and the two internal 33pF capacitors are already connected.
* **Benefit:** Reduces component count and saves PCB space.
---
## 3. Pin Configuration
The device features 3 pads on the bottom of the SMD package:
1. **Input (Osc1):** Connected to the XTAL input of the MCU.
2. **Ground (GND):** The center pin, must be connected to the system ground.
3. **Output (Osc2):** Connected to the XTAL output of the MCU.
---
## 4. Applications
Due to its high-temperature rating (up to 125°C) and compact size, this part is commonly found in:
* **Automotive Electronics:** Powertrain control, safety systems, and body electronics.
* **Consumer Electronics:** Remote controls, home appliances, and toys.
* **Industrial:** Basic logic timing for PLC modules or sensor nodes.
---
- ⤷
What are the main advantages of a ceramic resonator over a quartz crystal?
- ⤷ How does the built-in capacitance affect the PCB layout design?
- ⤷ Can this component be used in high-precision timing applications like RTCs?