CTML1206F-R27K
AI

The **CTML1206F-R27K** is a surface-mount multi-layer ceramic chip inductor. Below is a detailed breakdown of its electronic characteristics, specifications, and applications.
### 1. Component Identification
The part number can be decoded to understand its fundamental physical and electrical properties:
| Segment | Meaning | Description |
| :--- | :--- | :--- |
| **CTML** | Series | Multi-layer Ceramic Chip Inductor |
| **1206** | Case Size | Dimensions (approx. 3.2mm x 1.6mm) |
| **F** | Material | Ferrite core material (typical for this series) |
| **R27** | Inductance | **0.27 µH** (R denotes decimal point) |
| **K** | Tolerance | **±10%** |
---
### 2. Technical Specifications
These parameters define how the part performs within an electronic circuit:
* **Inductance:** 0.27 µH
* **Tolerance:** ±10% (K)
* **Test Frequency:** Typically measured at 25 MHz.
* **DC Resistance (DCR):** Usually low (approx. 0.45 Ω max), minimizing power loss.
* **Rated Current:** The maximum current it can carry before overheating (typically around 300mA for this value).
* **Self-Resonant Frequency (SRF):** The frequency at which the component stops acting as an inductor (typically >150 MHz).
---
### 3. Construction and Features
The CTML series uses a **Multi-layer Technology** which offers several advantages over wire-wound inductors:
1. **Magnetic Shielding:** The closed magnetic circuit created by the multi-layer structure prevents electromagnetic interference (EMI) with surrounding components.
2. **High Reliability:** The monolithic structure (fired ceramic) is highly resistant to mechanical shock and heat.
3. **Solderability:** Features nickel barrier terminations with a tin overcoat to prevent "leaching" during soldering.
---
### 4. Typical Applications
The 1206-sized 0.27µH inductor is commonly used in high-frequency and power-sensitive environments:
* **Noise Suppression:** Filtering high-frequency noise in digital circuits.
* **Signal Conditioning:** Used in RF (Radio Frequency) matching circuits.
* **Decoupling:** Preventing power supply noise from affecting sensitive ICs.
* **Consumer Electronics:** Mobile phones, tablets, and computers where space and EMI shielding are critical.
---
### 5. Footprint (1206 Metric 3216)
For PCB design, use the following standard 1206 dimensions:
```text
Length (L): 3.2mm ± 0.2mm
Width (W): 1.6mm ± 0.2mm
Height (T): 1.1mm ± 0.2mm (standard)
```
- ⤷
What are the main differences between ceramic and wire-wound inductors?
- ⤷ How does the SRF (Self-Resonant Frequency) impact circuit design?
- ⤷ Can this inductor be used in high-power switching regulators?