Electronic Components Datasheet Search
  British  ▼
ALLDATASHEET.CO.UK

X  

  • LS03-R5

  • AI
    The **LS03-R5** is a common electronic sensor module, specifically a **Reflective Optical Photosensor** (often used as a line tracker or proximity switch). It operates based on the principle of infrared (IR) light emission and detection. --- ### 1. Key Components and Construction The LS03-R5 typically consists of the following electronic parts integrated into a single housing: | Part | Component Type | Function | | :--- | :--- | :--- | | **IR Emitter** | Infrared LED | Emits a beam of infrared light toward a surface. | | **IR Detector** | Phototransistor | Detects the reflected IR light from the surface. | | **Comparator IC** | LM393 (usually) | Compares the signal from the detector against a threshold. | | **Potentiometer** | Variable Resistor | Adjusts the sensitivity/detection range. | | **Resistors/Caps** | SMD Passive Components | Current limiting for the LED and signal filtering. | --- ### 2. Technical Specifications The electrical characteristics are vital for integrating the LS03-R5 into a microcontroller project (like Arduino or ESP32). | Parameter | Value/Range | | :--- | :--- | | **Operating Voltage (VCC)** | 3.3V to 5V DC | | **Output Type** | Digital (High/Low) and sometimes Analog | | **Detection Distance** | 1mm to 25mm (Adjustable) | | **Signal Logic** | Logic 0 (Low) when object detected; Logic 1 (High) when clear | --- ### 3. Pinout Configuration The module generally features a 3-pin or 4-pin interface: 1. **VCC:** Power Supply (3.3V - 5V). 2. **GND:** Ground. 3. **DO (Digital Output):** TTL level output based on the threshold set by the potentiometer. 4. **AO (Analog Output):** (Optional) Real-time voltage reflecting the intensity of the reflection. --- ### 4. Working Principle The electronic logic follows these steps: 1. The **Infrared LED** continuously emits IR light. 2. If an object is within range, the light reflects back into the **Phototransistor**. 3. The phototransistor's resistance changes, creating a voltage swing. 4. The **LM393 Comparator** compares this voltage to the preset value from the **Potentiometer**. 5. If the reflection is strong enough, the output pin transitions to a **Low state (0V)** and an onboard LED usually lights up. --- ### 5. Sample Wiring (Arduino) ```cpp // Basic code to read LS03-R5 Digital Output int sensorPin = 2; // Connected to DO int ledPin = 13; // Internal LED void setup() { pinMode(sensorPin, INPUT); pinMode(ledPin, OUTPUT); } void loop() { int sensorState = digitalRead(sensorPin); if (sensorState == LOW) { digitalWrite(ledPin, HIGH); // Object detected } else { digitalWrite(ledPin, LOW); // No object } } ```
    ✨ Follow-up Questions
    • ⤷How do I adjust the detection range using the onboard potentiometer?
    • ⤷ What is the difference between the Digital Output and Analog Output on this sensor?
    • ⤷ Can the LS03-R5 detect dark surfaces as effectively as light surfaces?