M95320-RMB6TP/PC
AI

The **M95320-RMB6TP** is a specific variant of the 32-Kbit serial SPI (Serial Peripheral Interface) EEPROM manufactured by **STMicroelectronics**. It is widely used in automotive and industrial applications for non-volatile data storage.
---
### 1. General Specifications
The device is designed to provide high reliability and low power consumption.
| Parameter | Value |
| :--- | :--- |
| **Memory Size** | 32 Kbits (4096 x 8 bits) |
| **Interface** | SPI (Mode 0 and Mode 3) |
| **Clock Frequency** | Up to 20 MHz |
| **Operating Voltage (Vcc)** | 1.8V to 5.5V |
| **Operating Temperature** | -40°C to +85°C |
| **Package** | UFDFPN8 (MLP8) |
---
### 2. Key Features
* **Write Protection:** Includes a hardware Write Protect (`/WP`) pin and software-programmable block protection.
* **High Endurance:** Supports 4 million write cycles (at 25°C).
* **Data Retention:** Guaranteed for more than 200 years.
* **Page Write:** Allows writing up to 32 bytes in a single instruction cycle.
* **ESD Protection:** High Electrostatic Discharge (ESD) immunity, typically exceeding 4000V (Human Body Model).
---
### 3. Part Number Breakdown
Understanding the suffix codes is crucial for sourcing the exact component:
| Code Segment | Meaning |
| :--- | :--- |
| **M95** | SPI Serial Access EEPROM family |
| **320** | 32 Kbit density |
| **-R** | Operating Voltage range: 1.8V to 5.5V |
| **MB** | Package: UFDFPN8 (2 x 3 mm) |
| **6** | Temperature range: -40 to +85 °C |
| **TP** | Packing: Tape & Reel |
---
### 4. Pin Configuration
The device usually comes in an 8-pin package with the following standard SPI layout:
```text
1. /S (Chip Select) 5. SDA (Serial Data In)
2. Q (Serial Data Out) 6. SCK (Serial Clock)
3. /W (Write Protect) 7. /HOLD (Hold)
4. VSS (Ground) 8. VCC (Supply Voltage)
```
---
### 5. Application Areas
* **Consumer Electronics:** Storing configuration settings in cameras or smart devices.
* **Industrial:** Calibration data and parameter storage for sensors.
* **Medical:** Data logging in portable medical equipment.
- ⤷
What are the main differences between the M95320 and the M24C32 (I2C version)?
- ⤷ How does the /HOLD pin function during an SPI communication cycle?
- ⤷ What is the typical power consumption in Standby mode for this part?