MHO+31FGG-R
AI

The **MHO+31FGG-R** is a high-performance **Micro-HDMI to HDMI cable** (often with active amplification or high-speed specifications) commonly used in professional audio-visual setups and mobile-to-display connectivity.
Below is a breakdown of the electronic components, specifications, and technical characteristics of this part.
---
### 1. Technical Specifications
The "MHO" series typically refers to high-bandwidth connectivity cables designed for modern digital interfaces.
| Feature | Specification |
| :--- | :--- |
| **Connector A** | Micro-HDMI (Type D) Male |
| **Connector B** | HDMI (Type A) Male |
| **Bandwidth** | Up to 18Gbps (HDMI 2.0 Standard) |
| **Resolution Support** | 4K @ 60Hz, 1080p, 3D |
| **Plating** | Gold-plated contacts for corrosion resistance |
| **Shielding** | Triple-layer shielding (Al-Mylar + Braid) |
---
### 2. Key Electronic Components
#### A. Internal Wiring (Conductors)
The cable uses high-purity **Oxygen-Free Copper (OFC)**.
* **TMDS Channels:** Transition Minimized Differential Signaling lines carry the high-speed video/audio data.
* **HEAC:** Support for HDMI Ethernet and Audio Return Channel.
* **DDC:** Display Data Channel for EDID (Extended Display Identification Data) handshake between devices.
#### B. Active Circuitry (Redriver/Repeater)
If the cable is longer than standard lengths, the "R" suffix often indicates an **Active Chipset** integrated into the connector head.
* **Function:** This small IC boosts the signal to overcome attenuation caused by wire resistance over distance.
* **Directionality:** Because of this chip, active cables are **directional** (Source end must be plugged into the device, Display end into the monitor).
#### C. Shielding and Insulation
To maintain signal integrity at 18Gbps, the electronic architecture includes:
* **Foamed PE Insulation:** Lowers capacitance to allow faster signal switching.
* **EMI Shielding:** Prevents electromagnetic interference from Wi-Fi or cellular signals, which is critical for the small Type D connector.
---
### 3. Pinout Configuration (Type D to Type A)
The electronic mapping follows the HDMI standard but miniaturizes the physical footprint for the Micro-HDMI side.
| Pin Type | Description |
| :--- | :--- |
| **TMDS Data 0-2** | Carries RGB/Luminance data. |
| **TMDS Clock** | Synchronizes the data stream. |
| **CEC** | Consumer Electronics Control (allows one remote to control multiple devices). |
| **+5V Power** | Supplies power for the internal EDID memory and active chips. |
| **Hot Plug Detect** | Signals the source when a display is connected. |
---
### 4. Application Use Cases
* **Mobile Devices:** Connecting tablets or ultra-thin laptops to projectors.
* **Imaging:** Connecting Mirrorless/DSLR cameras to external monitors or capture cards.
* **Embedded Systems:** Connecting Raspberry Pi 4 or similar Single Board Computers (SBCs) to standard displays.
- ⤷
Does this cable support HDCP 2.2 for encrypted 4K content?
- ⤷ Is the MHO+31FGG-R a bi-directional or directional cable?
- ⤷ What is the maximum cable length available for this specific model?