AI

### Detailed Analysis: SMD CHR1008-R27
The **SMD CHR1008-R27** is a surface-mount electronic component, specifically a **Wire-Wound Chip Inductor**. Below is a breakdown of its technical specifications, physical characteristics, and typical applications.
---
### 1. Part Number Breakdown
To understand the component, we decode the nomenclature:
| Segment | Meaning | Detail |
| :--- | :--- | :--- |
| **SMD** | Mounting Type | Surface Mount Device |
| **CHR** | Series Code | Often refers to High-Frequency / Ceramic Core series |
| **1008** | Case Size | Imperial size 1008 (approx. 2.5mm x 2.0mm) |
| **R27** | Inductance Value | **0.27 µH** (or 270 nH) |
---
### 2. Technical Specifications
While exact specs can vary slightly by manufacturer (e.g., Bourns, Murata, or TDK), the following are standard for a **R27 (270nH)** 1008 inductor:
| Parameter | Value (Typical) |
| :--- | :--- |
| **Inductance** | 0.27 µH (270 nH) |
| **Tolerance** | ±5% (J) or ±10% (K) |
| **Quality Factor (Q min)** | 25 - 45 (at specific test frequency) |
| **Self-Resonant Frequency (SRF)** | 500 MHz - 900 MHz |
| **DC Resistance (DCR max)** | 0.50 - 1.2 Ohms |
| **Rated Current (Idc)** | 300 mA - 600 mA |
| **Core Material** | Ceramic or Ferrite (Ceramic is common for "CHR") |
---
### 3. Key Features
* **Wire-Wound Construction:** Unlike multilayer inductors, these use a wire coiled around a core. This provides a much higher **Q-Factor** and lower DC resistance.
* **Compact Footprint:** The 1008 (2520 metric) size is ideal for high-density circuit boards where space is limited but high performance is required.
* **High Stability:** Excellent thermal stability and resistance to mechanical shock.
---
### 4. Applications
This specific value (270nH) is commonly used in high-frequency circuitry:
1. **RF Circuits:** Used in impedance matching and resonant circuits for wireless communication (Wi-Fi, Bluetooth).
2. **Filtering:** Low-pass or band-pass filters to eliminate noise in signal lines.
3. **Decoupling:** Preventing high-frequency noise from entering sensitive power rails.
4. **Mobile Electronics:** Found in smartphones, tablets, and wearable tech due to the small form factor.
---
### 5. Identification on PCB
When looking at a circuit board, this part usually appears as a small rectangular block with:
* Two metallic end caps (Terminations).
* A visible winding (if the casing is transparent/ceramic) or a solid molded body (usually black or white).
* **Polarity:** Inductors are non-polarized; they can be soldered in either orientation.
- ⤷
What is the difference between a ceramic core and a ferrite core for this inductor size?
- ⤷ How do I calculate the ripple current limit for a 270nH inductor?
- ⤷ What are the common alternatives to the 1008 package size for RF applications?