SMDCHR1008-R91
AI

## SMDCHR1008-R91: Electronic Specifications and Overview
The **SMDCHR1008-R91** is a high-frequency Surface Mount Device (SMD) wire-wound chip inductor. These components are primarily used in RF (Radio Frequency) circuits where high precision and high Q-factors are required.
---
### 1. Part Number Breakdown
Understanding the nomenclature helps identify the physical and electrical characteristics:
| Segment | Meaning | Description |
| :--- | :--- | :--- |
| **SMD** | Type | Surface Mount Device |
| **CH** | Series | Ceramic High-Frequency / High Q series |
| **1008** | Case Size | 1008 Imperial (approx. 2.5 x 2.0 mm) |
| **R91** | Inductance | 0.91 µH (910 nH) |
---
### 2. Key Technical Specifications
Based on standard industry data for 1008-size ceramic chip inductors with an **R91** designation:
| Parameter | Value (Typical) |
| :--- | :--- |
| **Inductance** | 0.91 µH (910 nH) |
| **Tolerance** | ±5% (J) or ±10% (K) |
| **Quality Factor (Q) min** | 25 - 35 (at 50 MHz) |
| **Self-Resonant Frequency (SRF)** | ~250 - 300 MHz |
| **DC Resistance (DCR) max** | 1.5 - 2.2 Ω |
| **Rated Current (max)** | 180 - 250 mA |
| **Operating Temperature** | -40°C to +125°C |
---
### 3. Construction and Material
* **Core Material:** Ceramic. This provides excellent thermal stability and a high Self-Resonant Frequency compared to ferrite cores.
* **Winding:** Precision wire-wound construction ensures tight tolerance and low parasitic capacitance.
* **Termination:** Usually gold-plated or tin-plated over nickel barrier to ensure good solderability and prevent leaching.
---
### 4. Typical Applications
The R91 (910 nH) value is relatively high for the 1008 ceramic series, making it suitable for:
1. **RF Filtering:** Low-pass or band-pass filters in wireless communication.
2. **Impedance Matching:** Used in antenna circuits to match the impedance of the power amplifier.
3. **Oscillators:** Serving as a frequency-determining element in VCOs (Voltage Controlled Oscillators).
4. **Decoupling:** Filtering high-frequency noise in sensitive RF signal lines.
---
### 5. Design Considerations
* **SRF Warning:** The Self-Resonant Frequency is approximately 250-300 MHz. Do not use this part in circuits operating near or above this frequency, as the inductor will behave like a capacitor.
* **Current Derating:** If operating in high-temperature environments (above 85°C), the rated current should be derated according to the manufacturer's curve to prevent overheating.
- ⤷
What is the difference between a ceramic core and a ferrite core for this specific inductance value?
- ⤷ How does the Q-factor affect the performance of this inductor in an RF filter?
- ⤷ Can you provide the physical dimensions in millimeters for the 1008 package?