STB05-R-4
AI

The **STB05-R-4** is a specific electronic component typically categorized as a **Surface Mount (SMT) Test Point**. These parts are essential for the PCB assembly and debugging process, providing a reliable contact point for probes and test clips without requiring through-holes.
---
## Technical Specifications
The STB05-R-4 belongs to the family of sub-miniature test terminals. Below are the typical technical parameters for this component:
| Parameter | Specification |
| :--- | :--- |
| **Component Type** | Surface Mount Test Point (SMT) |
| **Material** | Phosphor Bronze or Brass |
| **Plating** | Tin (R-4 variant) or Silver/Gold options |
| **Current Rating** | Up to 2 Amps (typical) |
| **Mounting Type** | Surface Mount (SMT) |
| **Tape Width** | 8mm or 12mm (depending on packaging) |
| **Operating Temp** | -55°C to +125°C |
---
## Key Features and Construction
### 1. Functional Design
The STB05-R-4 is designed with a small "loop" or "hook" profile. This allows a standard oscilloscope probe or a "grabber" clip to attach securely to the PCB.
### 2. SMT Compatibility
Unlike traditional through-hole test points, the STB05-R-4 is designed for automated pick-and-place machines. It features a flat top surface (or comes in specialized carrier tape) to allow vacuum nozzles to lift it.
### 3. Material Durability
The base metal is usually a copper alloy, ensuring high conductivity and high fatigue resistance. The "R-4" designation often refers to the specific plating or packaging configuration (Standard Tin finish over Nickel).
---
## Application and Usage
1. **Hardware Debugging:** Provides a dedicated location to measure voltages or signal waveforms (I2C, SPI, Power Rails) using a Multimeter or Oscilloscope.
2. **Quality Control:** Used during the manufacturing phase for Automated Test Equipment (ATE) to ensure the board is functioning correctly before final assembly.
3. **Grounding:** Frequently used as a convenient chassis ground connection point for shielding or static discharge.
### PCB Footprint Example
While you should always consult the specific datasheet for the manufacturer (like *Components Corp* or *Mac8*), the typical land pattern looks like this:
```markdown
[ Pad ] <--- Solder area approx 1.5mm x 2.5mm
| |
--- <--- Component Body (The Loop)
```
---
- ⤷
What are the main differences between the STB05-R-4 and through-hole test points?
- ⤷ Can the STB05-R-4 be used for high-frequency signal testing?
- ⤷ What is the recommended solder paste profile for this component?