Description :
DALI Gateway brings together the crossfunctional KNX installation bus and the lighting control specific DALI-Bus (IEC 60929). Lights with cost-effective, digital DALI ECGs can therefore be integrated into an overall KNX architecture and operated via the multitude of existing KNX devices.
KDA-64 is a device used to control ECGs with a DALI interface via KNX. The device transforms switch and dim commands from the connected KNX system into DALI telegrams and status information from the DALI bus into KNX telegrams.
KDA-64 is a Category 1 device (in accordance with EN 62386-103). This means the device must only be used in DALI segments with connected ECGs and not with other DALI control devices within the segment (No multi-master function).
Power supply for the up to 64 connected ECGs comes directly from the DaliControl e64. An additional DALI power supply is not required and not permitted.
The device comes in a 4 units wide DIN Rail casing so it can be directly integrated into the mains distribution box. Connection to the KNX bus is via a bus connector. Network and DALI lines are connected via screw connectors on the device.
ECGs can be switched, dimmed and set to a defined value in 16 groups per gateway. In addition to group control, KDA-64 offers the possibility to individually control up to 64 ECGs.

Features :
• KNX proof gateway
• Easy configuration & installation
• Cost effective solution for smart building
• Connector up to 64 DALI ECGs/Drivers
• Built-in DALI power supply
• LCD 2x12 display
• Lighting control via the button
• Lighting control via the integrated web server
• Up to 16 DALI lighting groups setting
• Up to 16 DALI scenes setting
• 3 year warranty