| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
PUI | 2M805-002-16NF11-200SA
| Amphenol Corporation |
RoHS : Not Compliant | | 2
 |
DB Roberts | 11-00212
| Haeger | LOCK CYLINDER SPRING MUSIC WIR E | | 10
 |
0021
| Heyco | R 291 PLIERS | | 0
|
E3-1210-021
| Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | | 0
|
DPN900-021
| Pop Rivets | | | 0
|
32002194
| Essentra Components | HOOKED LOCK WIRE PLASTIC LONG | | 0
|
27PIF0021B
| Essentra Components | PUSH IN FASTENER, .080 HOLE, . | | 0
|
07240-00210
| Avdel | COVER PLATE | | 0
|
07240-00211
| Avdel | FILLER SCREW | | 0
|
07534-00215
| Avdel | SCREW | | 0
|
20021887
| Essentra Components | | | 0
|
15002110
| Essentra Components | HVAC HINGE 3D ADJUSTABLE | | 0
|
1002-188-SS
| RAF Electronic Hardware | | | 0
|
07530-00211
| Avdel | AIR TAIL JAW CONCRTNA TB | | 0
|
07610-02100
| Avdel | MAXLOK NOSE ASSY,1/4 | | 0
|
MA-07-230-02-140
| Southco | Quality and style are the essence of the McCoy Series of entry door locks. They provide a solid feel for actuation and offer a variety of finishes in 100 marine-grade corrosion-resistant materials to present a premium quality look for stylish swinging doo | | 0
|
ECCO | ST5M1608-0021A
| OTTO Engineering Inc | | | 2
|
Flip Electronics | FDS4465-SN00219
| onsemi | Stock, Ship Today | | 180,500
|
840021AGLF
 | Integrated Device Technology Inc | Stock
RoHS : Compliant | | 25,000
|
CDB260W-1700-210-R
| Energy Recovery Products | Stock, Ship Today | | 225
|
PMB260W-1700-210
| Energy Recovery Products | Stock, Ship Today | | 213
|
CDB260W-1700-210-W
| Energy Recovery Products | Stock, Ship Today | | 8
|
Maritex | 430310021
| Molex | Rectangular Connector Contacts; 430310021; MOLEX; Tin; Male
RoHS : Compliant | 12,000 : $0.027
300 : $0.032
100 : $0.033
30 : $0.041
10 : $0.054
1 : $0.0711
|
| 35,941
|
2N7002 12W
| Shikues Semiconductor | MOSFETs; 2N7002 12W; SHIKUES | | 3,000
|
436500212
| Molex | Male Pin Headers; 436500212; MOLEX; 1; Tin; 2; Right Angle
RoHS : Compliant | 320 : $0.437
300 : $0.463
100 : $0.5
30 : $0.663
10 : $0.863
1 : $1.0974
|
| 2,382
|
436500218
| Molex | Male Pin Headers; 436500218; MOLEX; 1; Tin; 2; 2
RoHS : Compliant | 2,760 : $0.479
300 : $0.547
100 : $0.582
30 : $0.755
10 : $0.971
1 : $1.2053
|
| 336
|
2002-1302
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 3-contacts for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; orange; for DIN rail; 800V/24A
RoHS : Compliant | 100 : $0.847
20 : $0.897
10 : $0.929
1 : $0.9922
|
| 200
|
2002-1201
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 2-contacts; for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; grey; for DIN rail; 600V/20A
RoHS : Compliant | 100 : $0.658
70 : $0.679
60 : $0.692
50 : $0.697
10 : $0.792
1 : $0.8922
|
| 151
|
2002-1207
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 2-terminal for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; green; for DIN rail
RoHS : Compliant | 500 : $2.513
200 : $2.65
100 : $2.758
25 : $3.09
1 : $3.6949
|
| 150
|
269E1002106KRB
| Matsuo Electric Co Ltd | Tantalum capacitor SMD; 10uF; 10V; 10%; 2K; 3.5x2.8 | | 128
|
2002-1206
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 2-contacts for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; yellow; for DIN rail; 600V/20A
RoHS : Compliant | 100 : $0.776
10 : $0.953
1 : $1.2264
|
| 100
|
2002-1301
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 3-contacts; for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; grey; for DIN rail; 800V/24A
RoHS : Compliant | 500 : $0.8
100 : $0.842
45 : $0.889
35 : $0.918
25 : $0.953
10 : $1.055
5 : $1.134
1 : $1.3264
|
| 100
|
2002-1304
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 3-contacts for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; blue; for DIN rail; 800V/24A
RoHS : Compliant | 100 : $0.808
60 : $0.832
50 : $0.842
30 : $0.918
1 : $1.0027
|
| 45
|
2002-121
| WAGO Innovative Connections | Adapter for 2002 series through terminal blocks; grey
RoHS : Compliant | 25 : $0.261
10 : $0.279
1 : $0.3026
|
| 25
|
2002-1204
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 2-terminal for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; blue; for DIN rail; 600V/20A
RoHS : Compliant | 100 : $0.65
50 : $0.653
20 : $0.7
10 : $0.742
5 : $0.776
1 : $0.8632
|
| 19
|
2002-1203
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 2-contacts for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; red; for DIN rail; 600V/20A
RoHS : Compliant | 100 : $0.684
50 : $0.734
25 : $0.758
10 : $0.774
1 : $0.8237
|
| 15
|
2002-1291
| WAGO Innovative Connections | End/internal wall; 0.8mm thick; grey, snap-on mounting
RoHS : Compliant | 25 : $0.384
10 : $0.403
5 : $0.434
1 : $0.4632
|
| 15
|
Pasternack Enterprises US | PE7AP1002-1
| Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 1 Watt, Attenuation: 1 dB, Connector Series 1: QMA, Connector Gender 1: Male, Connector Series 2: QMA, Connector Gender 2: Female, Body Material: Brass, Body Plating: Tri-Metal. 1 dB Fixed Attenuator, QMA Male to QMA Female Brass Tri-Metal Body Rated to 1 Watt Up to 6 GHz. PE7AP1002-1 is a fixed 1 dB attenuator from Pasternack. This 1dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This QMA attenuator has a male gender on side 1 and a QMA female connector on side 2. The Pasternack PE7AP1002-1 1 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 1 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP1002-1 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 1dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $107.99
25 : $102.59
50 : $97.19
100 : $92.87
|
| 24
|
PE3C3002-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female Bulkhead to MCX Plug Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA female bulkhead to MCX plug cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to MCX plug cable 12 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MCX cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and MCX cable connection on the other. Our SMA to MCX cable assembly has female gender on end 1 and plug on end 2. PE3C3002-12 can also be known as a SMA jack to MCX male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA jack to MCX male cable assembly PE3C3002-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to MCX cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder/solder attachment method and a brass body with gold over nickel plating, while the other has solder attachment method and brass body with gold over nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C3002-12 RF cable are available on our downloadable PDF datasheet.PE3C3002-12 can also be used in the other direction and will be MCX plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. | 1 : $90.99
25 : $86.44
50 : $81.89
100 : $78.25
|
| 17
|
PE3C3002-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Female Bulkhead to MCX Plug Cable 18 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA female bulkhead to MCX plug cable 18 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to MCX plug cable 18 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MCX cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and MCX cable connection on the other. Our SMA to MCX cable assembly has female gender on end 1 and plug on end 2. PE3C3002-18 can also be known as a SMA jack to MCX male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA jack to MCX male cable assembly PE3C3002-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to MCX cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder/solder attachment method and a brass body with gold over nickel plating, while the other has solder attachment method and brass body with gold over nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C3002-18 RF cable are available on our downloadable PDF datasheet.PE3C3002-18 can also be used in the other direction and will be MCX plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. | 1 : $96.99
25 : $92.14
50 : $87.29
100 : $83.41
|
| 17
|
PE3C100021-6
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.0mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 1.0mm Male to 1.0mm Male Armored Low Loss Test Cable 6 Inch Length., Radio frequency assembly 1.0mm male to 1.0mm male armored low loss test cable 6 inch length from Pasternack is part of the largest selection of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0mm male to 1.0mm male armored low loss test cable 6 inch length, like our other Pasternack coaxial cable assemblies, will ship the same day. Custom versions of these RF cable assemblies can be built and shipped within two weeks. Custom cable assembly lengths can be obtained by contacting a sales representative. RF testing can also be performed to document the electrical performance of your cable assembly. The Pasternack RF coax low loss test cable assembly is built with a 1.0mm cable connection on one end and a 1.0mm cable connection on the other. Our low loss test 1.0mm to 1.0mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100021-6 can also be known as a low loss test 1.0mm plug to 1.0mm plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5 inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. Our PE3C100021-6 RF cable has a FEP jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has an in-series connection. The Pasternack flexible 1.0mm cable assembly is manufactured with 1.0mm to 1.0mm cable connectors and has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss test RF cable are available on our downloadable PDF datasheet. Low loss test 1.0mm male to 1.0mm male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.0mm to 1.0mm cable assembly for quick shipment worldwide. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0mm low loss test RF cable assembly as per your requirements. | 1 : $4,200.0
10 : $4,116.0
25 : $4,032.0
100 : $3,948.0
|
| 2
|
PE3C100021-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.0mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.0mm Male to 1.0mm Male Armored Low Loss Test Cable 12 Inch Length., Radio frequency assembly 1.0mm male to 1.0mm male armored low loss test cable 12 inch length from Pasternack is part of the largest selection of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0mm male to 1.0mm male armored low loss test cable 12 inch length, like our other Pasternack coaxial cable assemblies, will ship the same day. Custom versions of these RF cable assemblies can be built and shipped within two weeks. Custom cable assembly lengths can be obtained by contacting a sales representative. RF testing can also be performed to document the electrical performance of your cable assembly. The Pasternack RF coax low loss test cable assembly is built with a 1.0mm cable connection on one end and a 1.0mm cable connection on the other. Our low loss test 1.0mm to 1.0mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100021-12 can also be known as a low loss test 1.0mm plug to 1.0mm plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5 inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. Our PE3C100021-12 RF cable has a FEP jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has an in-series connection. The Pasternack flexible 1.0mm cable assembly is manufactured with 1.0mm to 1.0mm cable connectors and has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss test RF cable are available on our downloadable PDF datasheet. Low loss test 1.0mm male to 1.0mm male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.0mm to 1.0mm cable assembly for quick shipment worldwide. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0mm low loss test RF cable assembly as per your requirements. | 1 : $4,440.0
10 : $4,351.2
25 : $4,262.4
100 : $4,173.6
|
| 1
|
PE3C10021
| Pasternack Enterprises | | | 0
|
PE3W00215-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male Right Angle to HN Male Right Angle Cable 36 Inch Length Using RG393 Coax., Radio frequency assembly N male right angle to HN male right angle cable 36 inch length using RG393 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to HN male right angle cable 36 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to HN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle N type cable connection on one end and right angle HN cable connection on the other. Our right angle type N to right angle HN cable assembly has male gender on end 1 and male on end 2. PE3W00215-36 can also be known as a right angle type N plug to right angle HN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. Type N plug to HN plug cable assembly PE3W00215-36 is built with RG393 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to right angle HN cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W00215-36 RF cable are available on our downloadable PDF datasheet.PE3W00215-36 can also be used in the other direction and will be right angle HN male to right angle type N male cable assembly if the opposite connectivity is required. Type N right angle plug to HN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to HN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal N RF cable assembly as per your requirements. | 1 : $237.99
25 : $226.09
50 : $214.19
100 : $204.67
|
| 0
|
PE3W00217
| Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. MCX Plug to BNC Male Cable Using RG316-DS Coax. PE3W00217 is a MCX plug to BNC male cable using RG316-DS coax. This Pasternack MCX plug to BNC male cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm BNC for connector 2. Our plug MCX to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00217 MCX plug to BNC male cable assembly is constructed with RG316-DS coax. | | 0
|
PE3W00215-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male Right Angle to HN Male Right Angle Cable 24 Inch Length Using RG393 Coax., Radio frequency assembly N male right angle to HN male right angle cable 24 inch length using RG393 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to HN male right angle cable 24 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to HN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle type N cable connection on one end and right angle HN cable connection on the other. Our right angle N type to right angle HN cable assembly has male gender on end 1 and male on end 2. PE3W00215-24 can also be known as a right angle type N plug to right angle HN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. N type plug to HN plug cable assembly PE3W00215-24 is built with RG393 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to right angle HN cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W00215-24 RF cable are available on our downloadable PDF datasheet.PE3W00215-24 can also be used in the other direction and will be right angle HN male to right angle N type male cable assembly if the opposite connectivity is required. Type N right angle plug to HN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to HN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal N RF cable assembly as per your requirements. | 1 : $209.99
25 : $199.49
50 : $188.99
100 : $180.59
|
| 0
|
PE3M0021-200CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. MIL-DTL-17 N Female Bulkhead to SMA Male Right Angle Cable 200 cm Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to SMA male right angle cable 200 cm length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to SMA male right angle cable 200 cm length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 type N to M39012/56-3109 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 type N bulkhead cable connection on one end and right angle M39012/56-3109 SMA cable connection on the other. Our M39012/03-0503 N type to right angle M39012/56-3109 SMA cable assemblies have a female gender on end 1 and male on end 2. This M39012/03-0503 type N to M39012/56-3109 SMA cable is a female to male coax assembly, PE3M0021-200CM, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 N type jack to right angle M39012/56-3109 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 type N jack to M39012/56-3109 SMA plug cable assembly PE3M0021-200CM is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 type N to right angle M39012/56-3109 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 N type female bulkhead to M39012/56-3109 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0021-200CM can also be used in the other direction and will be right angle M39012/56-3109 SMA male to M39012/03-0503 type N female bulkhead cable assembly if the opposite connectivity is required. M39012/03-0503 type N jack bulkhead to M39012/56-3109 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 N type to M39012/56-3109 SMA cable assembly for quick shipment worldwide. Variations of M39012/03-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to SMA male right angle cable 200 cm length using M17/60-RG142 coax. | 1 : $399.99
25 : $379.99
50 : $359.99
|
| 0
|
PE3W00215
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. N Male Right Angle to HN Male Right Angle Cable Using RG393 Coax., Radio frequency assembly N male right angle to HN male right angle cable using RG393 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to HN male right angle cable using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to HN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle N type cable connection on one end and right angle HN cable connection on the other. Our right angle type N to right angle HN cable assembly has male gender on end 1 and male on end 2. PE3W00215 can also be known as a right angle type N plug to right angle HN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. N type plug to HN plug cable assembly PE3W00215 is built with RG393 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to right angle HN cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W00215 RF cable are available on our downloadable PDF datasheet.PE3W00215 can also be used in the other direction and will be right angle HN male to right angle type N male cable assembly if the opposite connectivity is required. Type N right angle plug to HN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to HN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal N RF cable assembly as per your requirements. | | 0
|
PE3W00214
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Female to 1.0/2.3 Plug Right Angle Cable Using. PE3W00214 is a SMA female to 1.0/2.3 plug right angle cable using LMR-100A coax. This Pasternack SMA female to 1.0/2.3 plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. SMA to 1.0/2.3 right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to plug 1.0/2.3 right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00214 SMA female to 1.0/2.3 plug right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3W00021
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. N Male Right Angle to Reverse Polarity TNC Male Ri. PE3W00021 is a N male right angle to reverse polarity TNC male right angle cable using RG223 coax. This Pasternack N male right angle to reverse polarity TNC male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. N right angle to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to reverse polarity male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00021 N male right angle to TNC reverse polarity male right angle cable assembly is constructed with RG223 coax. | | 0
|
PE3M0021-100CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 39.9701 inches. MIL-DTL-17 N Female Bulkhead to SMA Male Right Angle Cable 101.5 cm Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to SMA male right angle cable 101.5 cm length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to SMA male right angle cable 101.5 cm length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 N type to M39012/56-3109 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 type N bulkhead cable connection on one end and right angle M39012/56-3109 SMA cable connection on the other. Our M39012/03-0503 type N to right angle M39012/56-3109 SMA cable assemblies have a female gender on end 1 and male on end 2. This M39012/03-0503 type N to M39012/56-3109 SMA cable is a female to male coax assembly, PE3M0021-100CM, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 N type jack to right angle M39012/56-3109 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 type N jack to M39012/56-3109 SMA plug cable assembly PE3M0021-100CM is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 type N to right angle M39012/56-3109 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 N type female bulkhead to M39012/56-3109 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0021-100CM can also be used in the other direction and will be right angle M39012/56-3109 SMA male to M39012/03-0503 type N female bulkhead cable assembly if the opposite connectivity is required. M39012/03-0503 N type jack bulkhead to M39012/56-3109 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 type N to M39012/56-3109 SMA cable assembly for quick shipment worldwide. Variations of M39012/03-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to SMA male right angle cable 101.5 cm length using M17/60-RG142 coax. | 1 : $373.99
25 : $355.29
50 : $336.59
|
| 0
|
PE3W00211
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Female Bulkhead to TNC Male Cable Using LMR-400-. PE3W00211 is a N female bulkhead to TNC male cable using LMR-400-UF coax. This Pasternack N female bulkhead to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our female N bulkhead to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00211 N female bulkhead to TNC male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
TE Connectivity | 0460-002-1631
| TE Connectivity | PIN, SOLID, SIZE 16, 16-18AWG, PD/NI/AU Terminal Type: Pin Wire Size: 16 – 18 AWG Wire Size: .75 – 1.5 mm² Interface Plating: Palladium Nickel (PdNi) Primary Locking Feature: Integrated in Housing Pin 16 – 18 AWG .75 – 1.5 mm² Palladium Nickel (PdNi) | Deutsch Connector Solid Contact | Part Number: 0460-002-1631 | Internal Number: 0460-002-1631 | TE Connectivity
RoHS : Compliant | | 14,366
|
330021
| TE Connectivity | SPLICE,CE 22-16 Splice Type: Closed End Splice Wire Size: 22 – 16 AWG Wire Size: .3 – 1.42 mm² Wire Size: 3.248 – 4.872 kcmil Wire Size: 3248 – 4872 CMA Closed End Splice 22 – 16 AWG .3 – 1.42 mm² 3.248 – 4.872 kcmil | Electrical Wire Splice | Part Number: 330021 | Internal Number: 330021 | TE Connectivity
RoHS : Compliant | 5,000 : $0.3
2,500 : $0.31
1,000 : $0.32
500 : $0.32
250 : $0.33
100 : $0.34
50 : $0.35
25 : $0.35
10 : $0.36
1 : $0.37
|
| 2,961
|
1-330021-0
| TE Connectivity | SPLICE,CE ECON 22-16 Splice Type: Closed End Splice Wire Size: 22 – 16 AWG Wire Size: .3 – 1.42 mm² Wire Size: 3.248 – 4.872 kcmil Wire Size: 3248 – 4872 CMA Closed End Splice 22 – 16 AWG .3 – 1.42 mm² 3.248 – 4.872 kcmil | Electrical Wire Splice | Part Number: 1-330021-0 | Internal Number: 1-330021-0 | TE Connectivity
RoHS : Compliant | 5,000 : $1.21
2,500 : $1.24
1,000 : $1.27
500 : $1.3
250 : $1.33
100 : $1.36
50 : $1.39
25 : $1.41
10 : $1.44
1 : $1.47
|
| 1,835
|
2470002-1
| TE Connectivity | EASYLOCK PLASTIC SIGNAL CONN,M,8P,A KEY Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Plug Number of Positions: 8 Sealable: Yes Contact Current Rating (Max): 5 A Wire-to-Panel Circular Connector Plug 8 | Easy-Lock Plastic Signal Connector | Part Number: 2470002-1 | Internal Number: 2470002-1 | TE Connectivity
RoHS : Compliant | 500 : $5.98
250 : $6.18
100 : $6.38
50 : $6.59
25 : $6.8
10 : $7.01
1 : $7.2
|
| 729
|
EC0021-000
| TE Connectivity | 05801303 Compatible Cable Diameter Range: 1.5 – 2 mm Compatible Cable Diameter Range: .06 – .08 in Primary Product Color: Orange Marker Style: Push-On Marker Size: 5 Z-Type Push-On Marker | 1.5 – 2 mm .06 – .08" Orange Push-On | Part Number: EC0021-000 | Internal Number: EC0021-000 | Alias Number: 05801303 | TE Connectivity
RoHS : Compliant | 5,000 : $0.04
2,500 : $0.05
1,000 : $0.05
500 : $0.05
250 : $0.05
100 : $0.05
50 : $0.05
25 : $0.05
10 : $0.05
1 : $0.05
|
| 469
|
1-2273002-1
| TE Connectivity | M8 x 1.0 straight plug Pigtail Cable Assembly Type: M8 Pigtail Number of Positions: 4 Cable Assembly Length: 1.5 m Cable Assembly Length: 4.9 ft M8/M12 Application Type: Sensor/Actuator M8 Pigtail 4 1.5 m 4.9 ft | M8 Connector: Pigtail Cable & Straight & Male | Part Number: 1-2273002-1 | Internal Number: 1-2273002-1 | TE Connectivity
RoHS : Compliant | 250 : $22.07
100 : $22.95
50 : $23.82
25 : $24.72
10 : $25.6
1 : $26.49
|
| 286
|
T2400002100-000
| TE Connectivity | CSF-10 Contact Mating Area Plating Material: Silver (Ag) Contact Type: Socket Wire Contact Termination Area Plating Material: Silver Wire Size: 8 – 8 AWG Operating Voltage: 250 VAC Silver (Ag) Socket 8 – 8 AWG | Connector Contact | Part Number: T2400002100-000 | Internal Number: T2400002100-000 | TE Connectivity
RoHS : Compliant | 250 : $10.49
100 : $10.91
50 : $11.33
25 : $11.75
10 : $12.17
1 : $12.59
|
| 262
|
RN152-10-02-1M8
| TE Connectivity | RN152-10-02-1M8 Operating Voltage (Max): 300 VDC Current Rating (Max): 10 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC 10 A PCB Terminal PD2 | Part Number: RN152-10-02-1M8 | Internal Number: 816531-SF | TE Connectivity
RoHS : Compliant | | 200
|
194002-1
| TE Connectivity | PIN ASSY..070 PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 6 | PCB Header & Receptacle | Part Number: 194002-1 | Internal Number: 194002-1 | TE Connectivity
RoHS : Compliant | 1,000 : $13.67
500 : $14.06
250 : $14.49
100 : $14.98
50 : $15.42
1 : $16.92
|
| 171
|
1415002-1
| TE Connectivity | PT270R24 Relay & Contactor Type: General Purpose Power Relay Current Type: AC Coil Magnetic System: Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 12 A General Purpose Power Relay AC Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: 1415002-1 | Internal Number: 1415002-1 | Alias Number: PT270R24 | TE Connectivity
RoHS : Compliant | 100 : $22.49
50 : $23.55
25 : $24.63
10 : $25.71
1 : $26.77
|
| 112
|
500002-1
| TE Connectivity | SPIRAP 1/2 PE, NAT, 50 FT Wire & Cable Accessory Type: Cable Tie Tool Cable Tie Mount Type: Spiral Primary Product Material: Polyethylene Primary Product Color: Natural Packaged Length: 15.24 m Cable Tie Tool Spiral Polyethylene Natural | Cable Tie Mounts & Accessories | Part Number: 500002-1 | Internal Number: 500002-1 | Alias Number: 691796-000 | TE Connectivity
RoHS : Compliant | 100 : $4.83
50 : $5.06
25 : $5.29
10 : $5.52
1 : $5.75
|
| 85
|
2-1002150-0-M
| TE Connectivity | DT4-052K W/TH LEADS/RIVET Piezo Film Sensor Type: Element Sensor Options: Leads Strips Element Leads | Piezo Film Sensors With Lead | Part Number: 2-1002150-0-M | Internal Number: 11029996-00 | TE Connectivity
RoHS : Compliant | | 43
|
U5254-000002-.14BG
 | TE Connectivity | PRESS XDCR U5254-000002-.14BG Pressure Sensor Type: Industrial Pressure Transducer Pressure Type: Absolute Output Signal Details: 4 – 20 mA Pressure: 2.03 psi Pressure: .14 bar Industrial Pressure Transducer Absolute 4 – 20 mA 2.03 psi | Heavy Industrial Pressure Transducer | Part Number: U5254-000002-.14BG | Internal Number: 11033273-00 | TE Connectivity
RoHS : Compliant | | 26
|
T1460100216-000
| TE Connectivity | H10B-SDR-BO-2PG16 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Side Locking | Rectangular Connector Hoods & Base | Part Number: T1460100216-000 | Internal Number: T1460100216-000 | TE Connectivity
RoHS : Compliant | 25 : $34.06
10 : $36.68
1 : $39.3
|
| 8
|
35-210-021-S
| TE Connectivity | Battery Disconnector 35-210-021-S Switch Main Contact Current Rating: 250 A Operating Voltage: 32 VDC Number of Poles: 1 Operating Handle Type: 45° Turn Off Handle Termination Thread Size: M8 Battery Disconnector & 200A & 1 Pole | 250 A 32 VDC 1 45° Turn Off Handle | Part Number: 35-210-021-S | Internal Number: K1136395 | TE Connectivity
RoHS : Compliant | | 1
|
Vyrian | 181-002-144
| Glenair Inc | MIL Series Connector | | 17,847
|
805-002-16M15-37PA
| Glenair Inc | Circular Connector, 37 Contact(s), Aluminum Alloy, Male, Plug
RoHS : Compliant | | 16,995
|
805-002-16NF19-85PA
| Glenair Inc | Circular Connector, 85 Contact(s), Aluminum Alloy, Male, Plug
RoHS : Not Compliant | | 16,978
|
805-002-16MT9-10PA
| Glenair Inc | Circular Connector, 10 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Plug
RoHS : Compliant | | 16,140
|
ADP50250021CBZR
| Analog Devices Inc | | | 12,137
|
2M805-002-16NF15-220PA
| Amphenol Corporation | MIL Series Connector, 20 Contact(s), Aluminium Alloy, Male, Crimp Terminal, Plug
RoHS : Not Compliant | | 11,054
|
7002130
| Scs Electronic Material Solutions Division | | | 11,026
|
823-22-024-10-002-101
| Mill-max Mfg | Board Stacking Connector, 24 Contact(s), 2 Row(s), Male, Straight, Solder Terminal | | 10,178
|
FN2500211
| Diodes Incorporated | CMOS Output Clock Oscillator, 25MHz Nom | | 10,113
|
805-002-16M11-201SA
| Glenair Inc | Circular Connector, 10 Contact(s), Aluminium Alloy, Female, Crimp Terminal, Plug
RoHS : Compliant | | 9,668
|
805-002-16Z112-5PA
| Glenair Inc | Circular Connector
RoHS : Compliant | | 9,639
|
20021111-00080T8LF
| Amphenol Icc | Board Connector, 82 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Locking, Black Insulator, Receptacle | | 8,324
|
MAX20021ATIA+
| Analog Devices Inc | Switching Regulator
RoHS : Compliant | | 7,317
|
2002-1671/401-000
| WAGO Innovative Connections | Modular Terminal Block
RoHS : Compliant | | 656
|
HLMA-QL00-S0021
| Agilent Technologies | Single Color LED, Amber, Untinted Nondiffused, T-3/4, 1.78mm | | 30
|
Waytek, Inc. | 19007-0021
| Molex | 16-14GA Nylon Flag .250 x .032 Nylon Insulated Female Flag FEMALE
RoHS : Compliant | 50 : $0.1842
200 : $0.1745
500 : $0.1624
1,000 : $0.1559
|
| 134,497
|
19128-0021
| Molex | 16-14 GA #6 Spade Terminal Non-Insulated | 100 : $0.0984
200 : $0.0895
500 : $0.0799
1,000 : $0.0723
5,000 : $0.069
|
| 19,049
|
7000021415
| 3M | 3M IDC TERMINAL SPLICE TAP RED 22-18 GA TO 18-14 GA | 50 : $0.4475
200 : $0.4234
500 : $0.3935
1,000 : $0.3775
|
| 7,495
|
160-021
| AFC Cable Systems Inc | Non-Metallic Electrical Tubing Black 3/4" 100 FT UL LIQUID TIGHT | 100 : $1.3901
500 : $1.3132
|
| 5,000
|
7000021421
| 3M | 3M FP-301-1/2-100' heat shrink tubing is black 1/2" thin-wall polyolefin on a 100' spool with a 2:1 shrink ratio. It is designed for insulating and protecting wire connections where broad diameter coverage, flexible installation, and dependable commercial-grade heat shrink performance are needed. | 100 : $1.0957
500 : $1.0535
|
| 2,700
|
54200210
| Aptiv PLC | Apex 2.8, 2 Way Sealed Male Assembly | 1 : $1.7179
50 : $1.4425
100 : $1.2589
200 : $1.1803
500 : $1.1278
|
| 1,929
|
0332002159
| The Bosch Group | Power Relay, Normally Open, 12VDC, 100A | 1 : $74.328
5 : $72.3549
10 : $70.3793
25 : $67.6605
|
| 42
|
DP-30021
| Data Panel Incorporated | 300A Solid State Battery Disconnect Switch Relay PT WITH PIGTAIL WIRE LEADS | 1 : $269.58
5 : $256.74
10 : $245.51
|
| 17
|
7000002130
| 3M | Hook Black 50 YDS Spool 3M # SJ-3526 | 1 : $272.37
5 : $262.28
10 : $253.87
25 : $240.42
|
| 8
|
7000002133
| 3M | Loop Black 50 YDS Spool 3M # SJ-3527 | 1 : $272.37
5 : $262.28
10 : $253.87
25 : $240.42
|
| 5
|
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand