| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
PUI | 2M805-002-16NF11-200SA
| Amphenol Corporation |
RoHS : Not Compliant | | 2
 |
Braemac Americas-Symmetry | 9002133
| Kyocera AVX Components | Ultra-Small ISM (868/915 MHz) Chip antenna
RoHS : Compliant | | 1
 |
76002125
| Digi International Inc | | | 0
|
76002154
| Digi International Inc | EX50 EU POWER CORD CABLE, IEC TO EU, 2PIN, 2M, BLACK | | 0
|
76002103
| Digi International Inc | Qty 1, Antenna,LTE Dipole SMA 1-3dBi 698-960/1710-2170/2500-2700 MHz, BLACK Accessory for IX10 | | 0
|
TMJUCHW0021102420
| Taoglas Antenna Solutions | RJ45 ICM, 10/100 Base-T, 1x1, Tab Up, 8 pin SMT, T+CMC, AutoMDIX, Shielded EMI Finger, LED, Industrial grade | | 0
|
76002138
| Digi International Inc | TX40 ITxPT Kit: TX router ITxPT Power Adapter Cable, 10cm, Black; Ethernet Cable M12 X-code Male, RJ45, Cat 5e, 1m, Black | | 0
|
76002183
| Digi International Inc | "PS,18VDC 1.66A Wallmount Level VI, Ind. temp, Changeable plugtips, 2pin Combicon screw terminal plug Suitable for IX10, X20, IX30, IX40" | | 0
|
76002123
| Digi International Inc | | | 0
|
TMJUTHW0021192420
| Taoglas Antenna Solutions | RJ45 ICM, 10/100 Base-T, 1x1, Short Body, Tab Down, 8 pin THT, T+CMC, Shielded EMI Finger, LED, Industrial grade | | 0
|
76002126
| Digi International Inc | | | 0
|
76002171
| Digi International Inc | | | 0
|
76002164
| Digi International Inc | Digi XBee Hive Accessory Kit - 900 MHz | | 0
|
450061 - 76002112 IS REPLACEMENT
| Digi International Inc | 18V PSU Power Supply for 633x-MX/6310-DX with Barrel Jack connector (Replacement) | | 0
|
76002165
| Digi International Inc | Digi XBee Hive Accessory Kit - 865/868 MHz | | 0
|
TMJUTHW0021102420
| Taoglas Antenna Solutions | RJ45 ICM, 10/100 Base-T, 1x1, Short Body, Tab Up, 8 pin THT, T+CMC, Shielded EMI Finger, LED, Industrial grade, 30 u" gold | | 0
|
Chip-Germany GmbH | 43650-0215
| Molex |
RoHS : Compliant | | 195
|
6FX2002-1DC00
| Siemens | | | 14
|
43650-0212
| Molex |
RoHS : Compliant | | 3
|
DB Roberts | 44002-13
| Vlier | BONDED PLATE ISOLATOR -NEOPRENE | | 21
|
0021
| Heyco | R 291 PLIERS | | 0
|
78230-02103
| Avdel | AUSLSUNG | | 0
|
782PP-800021
| Avdel | SCHARNIER ST SCHWARZ SIEHE Z | | 0
|
MA-02-230-02-100
| Southco | Quality and style are the essence of the McCoy Series of entry door locks. They provide a solid feel for actuation and offer a variety of finishes in 100 marine-grade corrosion-resistant materials to present a premium quality look for stylish swinging doo | | 0
|
MA-01-420-02-14
| Southco | Quality and style are the essence of the McCoy Series of entry door locks. They provide a solid feel for actuation and offer a variety of finishes in 100 marine-grade corrosion-resistant materials to present a premium quality look for stylish swinging doo | | 0
|
3002-1/2A
| Essentra Components | FLANGE PROTECTORLDPE BLACK | | 0
|
MA-02-550-02-140
| Southco | Quality and style are the essence of the McCoy Series of entry door locks. They provide a solid feel for actuation and offer a variety of finishes in 100 marine-grade corrosion-resistant materials to present a premium quality look for stylish swinging doo | | 0
|
MA-08-220-02-10
| Southco | | | 0
|
90009-00211
| Avdel | STARLOCK NOSE-TIP 9-11MM 06114 | | 0
|
FAM400-213
| Pop Rivets | PNT210 MANDREL M6 | | 0
|
FAM400-215
| Pop Rivets | PNT210 MANDREL M10 | | 0
|
MA-07-450-02-140
| Southco | Quality and style are the essence of the McCoy Series of entry door locks. They provide a solid feel for actuation and offer a variety of finishes in 100 marine-grade corrosion-resistant materials to present a premium quality look for stylish swinging doo | | 0
|
MA-01-600-02-14
| Southco | Quality and style are the essence of the McCoy Series of entry door locks. They provide a solid feel for actuation and offer a variety of finishes in 100 marine-grade corrosion-resistant materials to present a premium quality look for stylish swinging doo | | 0
|
MA-07-550-02-140
| Southco | Quality and style are the essence of the McCoy Series of entry door locks. They provide a solid feel for actuation and offer a variety of finishes in 100 marine-grade corrosion-resistant materials to present a premium quality look for stylish swinging doo | | 0
|
ECCO | M39012/25-0021
| Amphenol SV Microwave |
RoHS : Compliant | | 6
|
ST5M1608-0021A
| OTTO Engineering Inc | | | 2
|
Flip Electronics | FDS4465-SN00219
| onsemi | Stock, Ship Today | | 180,500
|
840021AGLF
 | Integrated Device Technology Inc | Stock
RoHS : Compliant | | 25,000
|
CDB260W-1700-210-R
| Energy Recovery Products | Stock, Ship Today | | 225
|
PMB260W-1700-210
| Energy Recovery Products | Stock, Ship Today | | 213
|
Maritex | PMBD7000,215
 | Nexperia | Rectifier Diodes & Bridges; PMBD7000,215; NEXPERIA; 3; 215 mA
RoHS : Compliant | 21,000 : $0.01
9,000 : $0.011
3,000 : $0.013
600 : $0.016
200 : $0.02
20 : $0.028
1 : $0.089
|
| 58,682
|
105300-2100
| Molex | Rectangular Connector Contacts; 105300-2100; MOLEX | 15,000 : $0.032
1 : $0.0445
|
| 36,203
|
2002-1302
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 3-contacts for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; orange; for DIN rail; 800V/24A
RoHS : Compliant | 100 : $0.82
20 : $0.869
10 : $0.899
1 : $0.9605
|
| 195
|
2002-1201
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 2-contacts; for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; grey; for DIN rail; 600V/20A
RoHS : Compliant | 100 : $0.637
70 : $0.657
60 : $0.67
50 : $0.675
10 : $0.767
1 : $0.8637
|
| 151
|
2002-1207
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 2-terminal for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; green; for DIN rail
RoHS : Compliant | 200 : $2.178
100 : $2.306
50 : $2.515
25 : $2.797
10 : $3.179
1 : $3.633
|
| 148
|
2002-1202
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 2-contacts for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; orange; for DIN rail; 600V/20A
RoHS : Compliant | 2,000 : $1.401
1,000 : $1.529
500 : $1.608
200 : $1.707
100 : $1.895
50 : $2.058
20 : $2.265
10 : $2.588
1 : $2.9655
|
| 100
|
2002-1301
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 3-contacts; for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; grey; for DIN rail; 800V/24A
RoHS : Compliant | 500 : $0.774
100 : $0.815
45 : $0.861
35 : $0.889
25 : $0.922
10 : $1.022
5 : $1.098
1 : $1.284
|
| 100
|
2002-1307
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 3-contacts for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; yellow-green; for DIN rail
RoHS : Compliant | 100 : $2.68
10 : $2.953
1 : $4.1094
|
| 100
|
2002-1206
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 2-contacts for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; yellow; for DIN rail; 600V/20A
RoHS : Compliant | 1,000 : $1.536
500 : $1.618
200 : $1.725
100 : $1.906
50 : $2.076
20 : $2.283
10 : $2.614
1 : $3.6661
|
| 98
|
2002-1204
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 2-terminal for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; blue; for DIN rail; 600V/20A
RoHS : Compliant | 10 : $0.632
5 : $0.655
3 : $0.673
1 : $0.7083
|
| 87
|
2002-1203
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 2-contacts for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; red; for DIN rail; 600V/20A
RoHS : Compliant | 2,000 : $1.401
1,000 : $1.529
500 : $1.608
200 : $1.707
100 : $1.895
50 : $2.058
20 : $2.265
10 : $2.588
1 : $3.6305
|
| 83
|
2002-1304
| WAGO Innovative Connections | Installation terminal block; 1-level; through; 3-contacts for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; blue; for DIN rail; 800V/24A
RoHS : Compliant | 100 : $0.782
60 : $0.805
50 : $0.815
30 : $0.889
1 : $0.9707
|
| 40
|
2002-121
| WAGO Innovative Connections | Adapter for 2002 series through terminal blocks; grey
RoHS : Compliant | 1,000 : $0.448
500 : $0.504
250 : $0.532
100 : $0.632
50 : $0.639
25 : $0.708
10 : $0.813
1 : $1.1133
|
| 25
|
2002-1292
| WAGO Innovative Connections | End/internal wall; 0.8mm thick; orange, snap-on mounting
RoHS : Compliant | 2,500 : $0.897
1,000 : $0.925
500 : $0.996
250 : $1.052
100 : $1.131
50 : $1.177
25 : $1.23
10 : $1.33
1 : $1.5541
|
| 19
|
2002-1291
| WAGO Innovative Connections | End/internal wall; 0.8mm thick; grey, snap-on mounting
RoHS : Compliant | 25 : $0.372
10 : $0.39
5 : $0.42
1 : $0.4484
|
| 15
|
Neutron USA | N002-100-BL
 | Tripp Lite | Tripp Lite Cat5e 350MHz Molded Patch Cable
RoHS : Compliant | | 132
|
77025-00000600-21
| Honeywell Sensing and Control | Industrial Pressure Sensors Pressure Switch, Op Pressure: 250psi, NC, Packard | | 50
|
760021.1000
| Amphenol Lutze | LCIS-RS24UP-S-1U; LCIS Relay Module | | 50
|
CFM-2510B-1100-218
| CUI Inc | DC Fans dc axial fan, 25 mm square, 10 mm, 10.8~13.2 Vdc, 0.08 W, 10000 RPM, 1.93 CFM, AR | | 50
|
CR10000700000210
| Red Lion Controls | HMI 7" Touchscreen 16M Color 800x480 Pixels 24VDC IP66 CR1000 Series | | 36
|
09A30-02-1-10N
| Grayhill Inc | Rotary Switch 10 Position SP10T 250mA (AC/DC) 115 VAC Panel Mount
RoHS : Compliant | | 11
|
44HS30-02-1-12N
| Grayhill Inc | Switch Rotary SP12T 12 Flatted Shaft Solder Lug 1A 115VAC 115VDC
RoHS : Compliant | | 9
|
CR10000700000210
| Hms Industrial Networks AB | HMI Displays & Panel PCs 7" Widescreen HMI with 2 Serial, 1 Ethernet, USB Device | | 9
|
71B30-02-1-05S
| Grayhill Inc | Rotary Switches 71B30-02-1-05S
RoHS : Compliant | | 6
|
1.10.021.001/0021
| RAFI GmbH & Co Kg | Selector Switch,RAMO 22 S,2 NO,Round,1 x 40,MOM Contact,Black,M12 4-Pin A-Coded
RoHS : Compliant | | 0
|
1.10.021.006/0021
| RAFI GmbH & Co Kg | Selector Switch,RAMO 22 S,2 NO,Round,1 x 90,1 x 40,MOM,Latching,M12 4-Pin A-Code
RoHS : Compliant | | 0
|
1.10.021.002/0021
| RAFI GmbH & Co Kg | Selector Switch,RAMO 22 S,2 NO,Round,2 x 40,MOM Contact,Black,M12 4-Pin A-Coded
RoHS : Compliant | | 0
|
09P30-02-1-04N
| Grayhill Inc | Switch Rotary SP4T 4 Flatted Shaft PC Pins 0.25A 115VAC 28VDC Automotive
RoHS : Compliant | | 0
|
606.2330.021
| Altech Corporation | Foot Switches TWO PEDAL FOOT SWITCH | | 0
|
1.30.240.021/1300
| RAFI GmbH & Co Kg | Industrial Panel Mount Indicators / Switch Indicators SWITCH RAFIX22QR PB ILL.RED | | 0
|
Pasternack Enterprises US | PE3W11002-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini UHF, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Mini UHF Female Bulkhead to Push-On Mini UHF Male Cable 12 Inch Length Using RG400 Coax., Radio frequency assembly mini UHF female bulkhead to push-on mini UHF male cable 12 inch length using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini UHF female bulkhead to push-on mini UHF male cable 12 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini UHF to mini UHF cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini UHF bulkhead cable connection on one end and a mini UHF cable connection on the other. Our mini UHF to mini UHF cable assembly has a female gender on end 1 and a male on end 2. PE3W11002-12 can also be known as a mini UHF jack to mini UHF plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W11002-12 RF cable has a FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Mini UHF jack to mini UHF plug cable assembly PE3W11002-12 is built with RG400 which is a flexible coax type. The Pasternack flexible Mini UHF cable assembly is manufactured with mini UHF to mini UHF cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W11002-12 can also be used in the other direction and will be a mini UHF male to mini UHF female bulkhead cable assembly if the opposite connectivity is required. Mini UHF jack bulkhead to mini UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini UHF to mini UHF cable assembly for quick shipment worldwide. Variations of mini UHF cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini UHF to Mini UHF RF cable assembly as per your requirements. | 1 : $57.79
25 : $54.9
50 : $52.01
100 : $49.7
|
| 731
|
PE3FCA002-1M
| Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex LC UPC to LC UPC, MM OM1, 2.0mm Riser cable, Orange - 1 meter. Pasternack’s PE3FCA002-1M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long patch cable assembly is equipped with simplex LC/UPC to LC/UPC connectors. Our orange fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a multimode OM1 fiber that offers stable, high-speed transmission over short distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA002-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements. | 1 : $20.49
5 : $20.08
10 : $19.67
25 : $19.26
|
| 336
|
PE3M0021
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm. MIL-DTL-17 N Female Bulkhead to SMA Male Right Angle Cable Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to SMA male right angle cable using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to SMA male right angle cable using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 type N to M39012/56-3109 SMA cable assembly orders will ship same day as well. Pasternack RF coax high reliability cable assembly is built with M39012/03-0503 N type bulkhead cable connection on one end and right angle M39012/56-3109 SMA cable connection on the other. Our high reliability M39012/03-0503 type N to right angle M39012/56-3109 SMA cable assemblies have a female gender on end 1 and male on end 2. This M39012/03-0503 type N to M39012/56-3109 SMA cable is a female to male coax assembly, PE3M0021, can also be known as a MIL-DTL-17/MIL-C-17 high reliability M39012/03-0503 type N jack to right angle M39012/56-3109 SMA plug cable assembly and will be shipped same-day as it is purchased in most cases. M39012/03-0503 N type jack to M39012/56-3109 SMA plug cable assembly PE3M0021 is built with M17/60-RG142 which is a flexible coax. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 N type to right angle M39012/56-3109 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 type N female bulkhead to M39012/56-3109 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0021 can also be used in the other direction and will be right angle M39012/56-3109 SMA male to M39012/03-0503 type N female bulkhead cable assembly when used in the opposite direction. High reliability M39012/03-0503 type N jack bulkhead to M39012/56-3109 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 type N to M39012/56-3109 SMA cable assembly for quick shipment worldwide. Variations of M39012/03-0503 N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to SMA male right angle cable using M17/60-RG142 coax. | | 70
|
PE3C100021
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.0mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm. 1.0mm Male to 1.0mm Male Armored Low Loss Test Cable., Radio frequency assembly 1.0mm male to 1.0mm male armored low loss test cable from Pasternack is part of the largest selection of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0mm male to 1.0mm male armored low loss test cable, like our other Pasternack coaxial cable assemblies, will ship the same day. Custom versions of these RF cable assemblies can be built and shipped within two weeks. Custom cable assembly lengths can be obtained by contacting a sales representative. RF testing can also be performed to document the electrical performance of your cable assembly. The Pasternack RF coax low loss test cable assembly is built with a 1.0mm cable connection on one end and a 1.0mm cable connection on the other. Our low loss test 1.0mm to 1.0mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100021 can also be known as a low loss test 1.0mm plug to 1.0mm plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5 inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. Our PE3C100021 RF cable has a FEP jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has an in-series connection. The Pasternack flexible 1.0mm cable assembly is manufactured with 1.0mm to 1.0mm cable connectors and has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss test RF cable are available on our downloadable PDF datasheet. Low loss test 1.0mm male to 1.0mm male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.0mm to 1.0mm cable assembly for quick shipment worldwide. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0mm low loss test RF cable assembly as per your requirements. | | 3
|
PE-W90S002-12
| Pasternack Enterprises | Key Specifications, Waveguide Size 1: WR-90, Flange Size 1: CPR-90G, Waveguide Size 2: WR-90, Flange Size 2: CPR-90G, Length: 12 inches, Frequency, Min: 8.2 GHz, Frequency, Max: 12.4 GHz. WR-90 Commercial Grade Straight Waveguide Section 12 Inch Length with CPR-90G Flange Operating from 8.2 GHz to 12.4 GHz. PE-W90S002-12 WR-90 waveguide section is straight and is 12 inches long. This 12 inch WR-90 straight waveguide section from Pasternack is commercial grade and has a CPR-90G flange. Our straight WR-90 waveguide section with CPR-90G flange has a minimum frequency of 8.2 GHz and a maximum frequency of 12.4 GHz. WR-90 waveguide section PE-W90S002-12 is part of over 40,000 RF, microwave and millimeter wave components. Our commercial grade WR-90 straight waveguide section will ship same the day as it is purchased worldwide as with our other RF parts. | 1 : $496.99
10 : $477.11
25 : $457.23
|
| 2
|
PE3C100021-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.0mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.0mm Male to 1.0mm Male Armored Low Loss Test Cable 12 Inch Length., Radio frequency assembly 1.0mm male to 1.0mm male armored low loss test cable 12 inch length from Pasternack is part of the largest selection of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0mm male to 1.0mm male armored low loss test cable 12 inch length, like our other Pasternack coaxial cable assemblies, will ship the same day. Custom versions of these RF cable assemblies can be built and shipped within two weeks. Custom cable assembly lengths can be obtained by contacting a sales representative. RF testing can also be performed to document the electrical performance of your cable assembly. The Pasternack RF coax low loss test cable assembly is built with a 1.0mm cable connection on one end and a 1.0mm cable connection on the other. Our low loss test 1.0mm to 1.0mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100021-12 can also be known as a low loss test 1.0mm plug to 1.0mm plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5 inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. Our PE3C100021-12 RF cable has a FEP jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has an in-series connection. The Pasternack flexible 1.0mm cable assembly is manufactured with 1.0mm to 1.0mm cable connectors and has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss test RF cable are available on our downloadable PDF datasheet. Low loss test 1.0mm male to 1.0mm male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.0mm to 1.0mm cable assembly for quick shipment worldwide. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0mm low loss test RF cable assembly as per your requirements. | 1 : $4,760.0
10 : $4,664.8
25 : $4,569.6
100 : $4,474.4
|
| 1
|
PE3M0021-100CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 39.9701 inches. MIL-DTL-17 N Female Bulkhead to SMA Male Right Angle Cable 101.5 cm Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to SMA male right angle cable 101.5 cm length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to SMA male right angle cable 101.5 cm length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 N type to M39012/56-3109 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 type N bulkhead cable connection on one end and right angle M39012/56-3109 SMA cable connection on the other. Our M39012/03-0503 type N to right angle M39012/56-3109 SMA cable assemblies have a female gender on end 1 and male on end 2. This M39012/03-0503 type N to M39012/56-3109 SMA cable is a female to male coax assembly, PE3M0021-100CM, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 N type jack to right angle M39012/56-3109 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 type N jack to M39012/56-3109 SMA plug cable assembly PE3M0021-100CM is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 type N to right angle M39012/56-3109 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 N type female bulkhead to M39012/56-3109 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0021-100CM can also be used in the other direction and will be right angle M39012/56-3109 SMA male to M39012/03-0503 type N female bulkhead cable assembly if the opposite connectivity is required. M39012/03-0503 N type jack bulkhead to M39012/56-3109 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 type N to M39012/56-3109 SMA cable assembly for quick shipment worldwide. Variations of M39012/03-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to SMA male right angle cable 101.5 cm length using M17/60-RG142 coax. | 1 : $400.99
25 : $380.94
50 : $360.89
|
| 0
|
PE3C10021/SP
| Pasternack Enterprises | | | 0
|
PE3C4002-144
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-FF430, RF Cable Type: PE-FF430, RF Cable Impedance: 50 Ohm, Length: 144 inches. Handheld RF Analyzer Rugged Phase Stable Cable N Male to N Male Cable 144 Inch Length Using PE-FF430 Coax, RoHS., Radio frequency assembly handheld RF analyzer rugged phase stable cable N male to N male cable 144 inch length using PE-FF430 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Handheld RF analyzer rugged phase stable cable N male to N male cable 144 inch length using PE-FF430 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3C4002-144, can also be known as a type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C4002-144 is built with PE-FF430 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is sextuple shielded. RF specs on this 9 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this handheld RF analyzer rugged phase stable cable N male to N male cable 144 inch length using PE-FF430 coax, RoHS. | 1 : $1,200.0
25 : $1,140.0
50 : $1,080.0
|
| 0
|
PE3C8002-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Female Bulkhead Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male to N female bulkhead low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N female bulkhead low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8002-12 can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.808-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8002-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8002-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8002-12 can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. | 1 : $80.29
25 : $76.28
50 : $72.26
100 : $69.05
|
| 0
|
PE3W00217
| Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. MCX Plug to BNC Male Cable Using RG316-DS Coax. PE3W00217 is a MCX plug to BNC male cable using RG316-DS coax. This Pasternack MCX plug to BNC male cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm BNC for connector 2. Our plug MCX to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00217 MCX plug to BNC male cable assembly is constructed with RG316-DS coax. | | 0
|
PE3W00211
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Female Bulkhead to TNC Male Cable Using LMR-400-. PE3W00211 is a N female bulkhead to TNC male cable using LMR-400-UF coax. This Pasternack N female bulkhead to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our female N bulkhead to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00211 N female bulkhead to TNC male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3W00215/HS
| Pasternack Enterprises | | | 0
|
PE3C1002-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female to SMP Female Cable 12 Inch Length Using PE-P086 Coax., Radio frequency assembly SMP female to SMP female cable 12 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable 12 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMP cable connection on the other. Our SMP to SMP cable assemblies have a female gender on end 1 and female on end 2. PE3C1002-12 can also be known as a SMP jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C1002-12 is built with PE-P086 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with SMP to SMP cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency SMP female to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP jack to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMP female cable 12 inch length using PE-P086 coax. | 1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03
|
| 0
|
PE3M0021-36
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 36 inches. MIL-DTL-17 N Female Bulkhead to SMA Male Right Angle Cable 36 Inch Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to SMA male right angle cable 36 inch length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to SMA male right angle cable 36 inch length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 type N to M39012/56-3109 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 type N bulkhead cable connection on one end and right angle M39012/56-3109 SMA cable connection on the other. Our M39012/03-0503 N type to right angle M39012/56-3109 SMA cable assemblies have a female gender on end 1 and male on end 2. This M39012/03-0503 type N to M39012/56-3109 SMA cable is a female to male coax assembly, PE3M0021-36, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 type N jack to right angle M39012/56-3109 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 N type jack to M39012/56-3109 SMA plug cable assembly PE3M0021-36 is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 type N to right angle M39012/56-3109 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 N type female bulkhead to M39012/56-3109 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0021-36 can also be used in the other direction and will be right angle M39012/56-3109 SMA male to M39012/03-0503 type N female bulkhead cable assembly if the opposite connectivity is required. M39012/03-0503 type N jack bulkhead to M39012/56-3109 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 type N to M39012/56-3109 SMA cable assembly for quick shipment worldwide. Variations of M39012/03-0503 N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to SMA male right angle cable 36 inch length using M17/60-RG142 coax. | 1 : $398.99
25 : $379.04
50 : $359.09
|
| 0
|
Vyrian | 8917002100
| Belden Inc | Wire And Cable, 1 Conductor(s), 16AWG, 848V, Flexible Cord And Fixture Wire
RoHS : Compliant | | 12,806
|
FL5000021
| Diodes Incorporated | Parallel - Fundamental Quartz Crystal, 50MHz Nom | | 12,503
|
HFE7000-210
| Honeywell Sensing and Control | LED Emitter, 50Mbps, SMA Connector, Through Hole Mount
RoHS : Unknown | | 11,731
|
HSDL-3020-021
| Broadcom Limited |
RoHS : Compliant | | 9,178
|
M27C4002-12XB1
 | STMicroelectronics |
RoHS : Compliant | | 8,676
|
M27C4002-15C1X
 | STMicroelectronics |
RoHS : Compliant | | 7,725
|
M27C4002-10XC6
| STMicroelectronics |
RoHS : Compliant | | 7,708
|
M27C4002-10B1
| STMicroelectronics | OTP ROM, 256KX16, 100ns, CMOS, PDIP40
RoHS : Compliant | | 7,607
|
M27C4002-10C6X
| STMicroelectronics |
RoHS : Compliant | | 6,823
|
M27C4002-10XB1X
| STMicroelectronics |
RoHS : Compliant | | 5,003
|
SIEHLMP-6305-L0021
| Broadcom Limited | | | 4,580
|
M27C4002-15XN6
 | STMicroelectronics |
RoHS : Compliant | | 4,165
|
CM8066002189001
| Intel Corporation | Microprocessor, 64-Bit, 1800MHz, CMOS | | 2,651
|
CW00218K00JE70
| Vishay Intertechnologies | Fixed Resistor, Wire Wound, 4W, 18000ohm, 268.328V, 5% +/-Tol, 30ppm/Cel, Through Hole Mount
RoHS : Compliant | | 780
|
564AAAA002114ABGR
| Skyworks Solutions Inc | LVPECL Output Clock Oscillator, 0.2MHz Min, 3000MHz Max
RoHS : Compliant | | 627
|
Waytek, Inc. | 19007-0021
| Molex | 16-14GA Nylon Flag .250 x .032 Nylon Insulated Female Flag FEMALE
RoHS : Compliant | 50 : $0.1842
200 : $0.1745
500 : $0.1624
1,000 : $0.1559
|
| 118,187
|
19128-0021
| Molex | 16-14 GA #6 Spade Terminal Non-Insulated | 100 : $0.1082
200 : $0.0984
500 : $0.0879
1,000 : $0.0795
5,000 : $0.0759
|
| 16,622
|
7000021415
| 3M | 3M IDC TERMINAL SPLICE TAP RED 22-18 GA TO 18-14 GA | 50 : $0.4475
200 : $0.4234
500 : $0.3935
1,000 : $0.3775
|
| 7,295
|
160-021
| AFC Cable Systems Inc | Non-Metallic Electrical Tubing Black 3/4" 100 FT UL LIQUID TIGHT | 100 : $1.3901
500 : $1.3132
|
| 4,200
|
7000021421
| 3M | 3M FP-301-1/2-100' heat shrink tubing is black 1/2" thin-wall polyolefin on a 100' spool with a 2:1 shrink ratio. It is designed for insulating and protecting wire connections where broad diameter coverage, flexible installation, and dependable commercial-grade heat shrink performance are needed. | 100 : $1.0957
500 : $1.0535
|
| 2,600
|
54200210
| Aptiv PLC | Apex 2.8, 2 Way Sealed Male Assembly | 1 : $1.8895
50 : $1.5866
100 : $1.3846
200 : $1.2982
500 : $1.2405
|
| 1,744
|
0332002159
| The Bosch Group | Power Relay, Normally Open, 12VDC, 100A | 1 : $74.328
5 : $72.3549
10 : $70.3793
25 : $67.6605
|
| 25
|
7000002133
| 3M | Loop Black 50 YDS Spool 3M # SJ-3527 | 1 : $272.37
5 : $262.28
10 : $253.87
25 : $240.42
|
| 13
|
7000002130
| 3M | Hook Black 50 YDS Spool 3M # SJ-3526 | 1 : $272.37
5 : $262.28
10 : $253.87
25 : $240.42
|
| 7
|
DP-30021
| Data Panel Incorporated | 300A Solid State Battery Disconnect Switch Relay PT WITH PIGTAIL WIRE LEADS | 1 : $269.58
5 : $256.74
10 : $245.51
|
| 0
|
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand