| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
Braemac Americas-Symmetry | 549BAAC000118ABG
| Skyworks Solutions Inc | Differential/single-ended; Any frequency (I2C) XO; 0.2-1500 MHz
RoHS : Compliant | | 1
 |
AIMC-0201-18NJ-T
 | Abracon Corporation |
RoHS : Compliant | | 0
|
AIAP-01-182K-T
 | Abracon Corporation |
RoHS : Compliant | | 0
|
AIAP-01-180K-T
| Abracon Corporation |
RoHS : Compliant | | 0
|
AISR-01-182J
| Abracon Corporation |
RoHS : Compliant | | 0
|
AISR-01-183J
| Abracon Corporation |
RoHS : Compliant | | 0
|
SI5395B-A10118-GM
| Skyworks Solutions Inc | Single PLL jitter attenuator with xtal: 12-outputs up to 350 MHz; integer+fractional
RoHS : Compliant | | 0
|
940-0118
| Qnity Laird | PCBA, TiWi-C-W Development Board, 4-Layer PCB | | 0
|
Chip-Germany GmbH | GO34210LF 4500118024
| GCi Technologies | | | 35
 |
Maritex | 10118194-0001LF
| Amphenol Corporation | USB/DVI/HDMI Connectors; 10118194-0001LF; AMPHENOL; Receptacle; Gold; 5; Right Angle | 4,800 : $0.16
2,400 : $0.173
1,200 : $0.192
150 : $0.243
50 : $0.28
5 : $0.374
1 : $1.1694
|
| 220,125
|
10118192-0002LF
| Amphenol Corporation | USB/DVI/HDMI Connectors; 10118192-0002LF; AMPHENOL; Receptacle; 5; Right Angle | 4,500 : $0.198
3,000 : $0.211
1,500 : $0.234
150 : $0.334
50 : $0.382
5 : $0.502
1 : $1.5694
|
| 39,509
|
10118192-0001LF
| Amphenol Corporation | USB/DVI/HDMI Connectors; 10118192-0001LF; AMPHENOL; Receptacle; Gold; 5; Right Angle | 1,400 : $0.221
500 : $0.243
100 : $0.308
10 : $0.403
1 : $0.5197
|
| 17,343
|
5011893010
| Molex | Rectangular Connector Housings; 5011893010; MOLEX; 2; 30; 30; Yes | 3,000 : $0.133
1,500 : $0.146
500 : $0.166
150 : $0.197
50 : $0.24
5 : $0.324
1 : $1.0063
|
| 11,660
|
10118193-0001LF
| Amphenol Corporation | USB/DVI/HDMI Connectors; 10118193-0001LF; AMPHENOL; Gold; 5; Right Angle | 4,800 : $0.177
2,400 : $0.191
1,200 : $0.212
150 : $0.265
50 : $0.306
5 : $0.408
1 : $1.2764
|
| 10,303
|
5011894010
| Molex | Rectangular Connector Housings; 5011894010; MOLEX; 2; 40; 40; Yes
RoHS : Compliant | 1,000 : $0.144
500 : $0.153
100 : $0.172
30 : $0.191
10 : $0.257
1 : $0.349
|
| 5,975
|
5011892010
| Molex | Rectangular Connector Housings; 5011892010; MOLEX; 1; 20; 20; Yes
RoHS : Compliant | 1,000 : $0.159
500 : $0.169
100 : $0.19
30 : $0.211
10 : $0.285
1 : $0.3847
|
| 5,000
|
PCA9538PW/Q900,118
 | NXP Semiconductors | I/O Port Expanders; PCA9538PW/Q900,118; NXP SEMICONDUCTORS; I2C, SMBus; 16; 8; 400 kHz
RoHS : Compliant | 1,000 : $1.893
500 : $2.071
100 : $2.301
50 : $2.479
10 : $2.777
1 : $3.179
|
| 2,198
|
PCA9952TW/Q900,118
 | NXP Semiconductors | LED Drivers; PCA9952TW/Q900,118; NXP SEMICONDUCTORS; 5.5 V; 28; 16; Surface Mount
RoHS : Compliant | 2,500 : $3.608
1,000 : $3.939
500 : $4.436
250 : $4.726
100 : $4.96
25 : $5.447
10 : $5.875
1 : $7.462
|
| 1,141
|
501189-5010
| Molex | Rectangular Connector Housings; 501189-5010; MOLEX; 2; 50; 50; Yes
RoHS : Compliant | 4,000 : $0.15
2,000 : $0.159
100 : $0.185
30 : $0.203
10 : $0.273
1 : $0.3643
|
| 1,094
|
PCA9685PW/Q900,118
 | NXP Semiconductors | LED Drivers; PCA9685PW/Q900,118; NXP SEMICONDUCTORS; 5.5 V; 28; 16
RoHS : Compliant | 500 : $2.683
250 : $2.94
100 : $3.174
25 : $3.503
10 : $3.783
1 : $4.349
|
| 531
|
R40N-3011-85-1005
| RELPOL | Electromagnetic relay; contact rating current 40A; coil voltage 5VDC; changeover contact (1P) 40A/30VDC;40A/240VAC | 105 : $4.29
30 : $4.566
5 : $4.767
1 : $4.963
|
| 195
|
R40N-3011-85-1024
| RELPOL | Electromagnetic relay; contact rating current 40A; coil voltage 24VDC; changeover contact (1P) 40A/30VDC;40A/240VAC | 510 : $2.69
90 : $3.004
30 : $3.934
5 : $4.487
1 : $4.963
|
| 100
|
0409-201-1800
| TE Connectivity | Automotive Connectors; 0409-201-1800; TE CONNECTIVITY; Natural; 21; No
RoHS : Compliant | | 5
|
6001184
| Sierra Wireless | Development kit for module; GPS | | 1
|
Neutron USA | 3L01-180
| White-Rodgers | Thermostats 140F in 180F Cut-out Open on Rise | | 50
|
71YY50118
| Grayhill Inc | Toggle Switch, Non-Illuminated | | 44
|
RM699BV-3011-85-1005
| Altech Corporation | Interface Relay Module, SPDT, 6 A 250VAC, 5 VDC Coil, PCB Terminal | | 20
|
2011836
| RS Pro | Power Supply PC 3.3V@18A, 5V@17A, 12V@38A 500W 200-240VAC Panel Mount | | 5
|
A185-30-11-84
| ABB Low Voltage Products and Systems | Contactor; NEMA; 3 Pole; 156A; 110-120VAC@60Hz; 110VAC@50Hz Coil; DIN Rail/Panel Mount | | 0
|
FG15-B01.180.36
| Davies Molding LLC | Davies Molding FG15-B01.180.36 Functional Handle - Straight handle ledge, stainless steel push button, 2 shank | | 0
|
01189-001
| Axis | T91B53 TELESCOPIC CEIL MOUNT, Wall and Ceiling, Adj Length, Price per item | | 0
|
902-0118-000
| Robotis Inc | AC, DC & Servo Motors XM430-W350-R | | 0
|
A95FP-30-11-85
| ABB Low Voltage Products and Systems | 3P CONTR.FIRE PUMP 380/50HZ | | 0
|
2701182
| Phoenix Contact | Option module, RS485 conn for data transfer or sw config, NLC-MOD-RS485
RoHS : Compliant | | 0
|
AE63-30-11-81
| ABB Low Voltage Products and Systems | Contactor, 3Pole 3NO, 90 A; 20 hp 208V; 60 hp 575/600V; 24Vdc Coil | | 0
|
A145F-30-11-85
| ABB Low Voltage Products and Systems | A145 3P CONTR 380/50 415/60 | | 0
|
1SVR450118R1000
| ABB Low Voltage Products and Systems | SNAP-ON MOUNTING FOR CM-CT DIN RAIL | | 0
|
2701186
| Phoenix Contact | Antennas ANT-DIR-2459-01, Panel antenna, 2.4/5 GHz, 9 dBi, linear vertical, N (female)
RoHS : Compliant | | 0
|
61030010118010
| HARTING Technology Group | D-Sub Backshells D-Sub 37pin Inducom Metal Hood, 3 Top Entries, knurled screw 4-40UNC, w/o internal grounding block
RoHS : Compliant | | 0
|
Pasternack Enterprises US | PE3C0118
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50. N Male to N Male Cable Using LMR-195 Coax. PE3C0118 is a type N male to type N male cable using LMR-195 coax. This Pasternack type N male to type N male cable assembly uses a 50 Ohm N type for connector 1 and a 50 Ohm type N for connector 2. Our male type N to male type N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0118 type N male to type N male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | | 5,830
|
PE3C0118/HS-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Low Loss Cable 12 Inch Length Using LMR-195 Coax with Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 12 inch length using LMR-195 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 12 inch length using LMR-195 coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C0118/HS-12 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C0118/HS-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 12 inch length using LMR-195 coax with Times Microwave components with heatshrink. | 1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43
|
| 1,169
|
PE3C0118/HS-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Low Loss Cable 48 Inch Length Using LMR-195 Coax with Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 48 inch length using LMR-195 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 48 inch length using LMR-195 coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0118/HS-48 can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C0118/HS-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 48 inch length using LMR-195 coax with Times Microwave components with heatshrink. | 1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15
|
| 1,169
|
PE3M0118-48
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 48 inches. MIL-DTL-17 BNC Male to TNC Male Cable 48 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 BNC male to TNC male cable 48 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 BNC male to TNC male cable 48 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/16-0013 BNC to M39012/26-0010 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/16-0013 BNC cable connection on one end and M39012/26-0010 TNC cable connection on the other. Our M39012/16-0013 BNC to M39012/26-0010 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/16-0013 BNC to M39012/26-0010 TNC cable is a male to male coax assembly, PE3M0118-48, can also be known as a MIL-DTL-17/MIL-C-17 M39012/16-0013 BNC plug to M39012/26-0010 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/16-0013 BNC plug to M39012/26-0010 TNC plug cable assembly PE3M0118-48 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/16-0013 BNC cable assembly is manufactured with M39012/16-0013 BNC to M39012/26-0010 TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/16-0013 BNC male to M39012/26-0010 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0118-48 can also be used in the other direction and will be M39012/26-0010 TNC male to M39012/16-0013 BNC male cable assembly if the opposite connectivity is required. M39012/16-0013 BNC plug to M39012/26-0010 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/16-0013 BNC to M39012/26-0010 TNC cable assembly for quick shipment worldwide. Variations of M39012/16-0013 BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 BNC male to TNC male cable 48 inch length using M17/28-RG58 coax. | 1 : $224.99
25 : $213.74
50 : $202.49
|
| 4
|
PE3M0118-18
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 18 inches. MIL-DTL-17 BNC Male to TNC Male Cable 18 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 BNC male to TNC male cable 18 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 BNC male to TNC male cable 18 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/16-0013 BNC to M39012/26-0010 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/16-0013 BNC cable connection on one end and M39012/26-0010 TNC cable connection on the other. Our M39012/16-0013 BNC to M39012/26-0010 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/16-0013 BNC to M39012/26-0010 TNC cable is a male to male coax assembly, PE3M0118-18, can also be known as a MIL-DTL-17/MIL-C-17 M39012/16-0013 BNC plug to M39012/26-0010 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/16-0013 BNC plug to M39012/26-0010 TNC plug cable assembly PE3M0118-18 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/16-0013 BNC cable assembly is manufactured with M39012/16-0013 BNC to M39012/26-0010 TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/16-0013 BNC male to M39012/26-0010 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0118-18 can also be used in the other direction and will be M39012/26-0010 TNC male to M39012/16-0013 BNC male cable assembly if the opposite connectivity is required. M39012/16-0013 BNC plug to M39012/26-0010 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/16-0013 BNC to M39012/26-0010 TNC cable assembly for quick shipment worldwide. Variations of M39012/16-0013 BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 BNC male to TNC male cable 18 inch length using M17/28-RG58 coax. | 1 : $316.99
25 : $301.14
50 : $285.29
|
| 4
|
PE3W01180-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MMCX Plug Right Angle to MMCX Plug Right Angle Cable 12 Inch Length Using PE-047SR Coax., Radio frequency assembly MMCX plug right angle to MMCX plug right angle cable 12 inch length using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to MMCX plug right angle cable 12 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and right angle MMCX cable connection on the other. Our right angle MMCX to right angle MMCX cable assemblies have a plug gender on end 1 and plug on end 2. PE3W01180-12 can also be known as a right angle MMCX male to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. MMCX male to MMCX male cable assembly PE3W01180-12 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid MMCX cable assembly is manufactured with right angle MMCX to right angle MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency MMCX right angle plug to MMCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MMCX right angle male to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to MMCX cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to MMCX plug right angle cable 12 inch length using PE-047SR coax. | 1 : $126.99
25 : $120.64
50 : $114.29
100 : $109.21
|
| 1
|
PE3W01180-3
| Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 3 inches. MMCX Plug Right Angle to MMCX Plug Right Angle Cable 3 Inch Length Using PE-047SR Coax., Radio frequency assembly MMCX plug right angle to MMCX plug right angle cable 3 inch length using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to MMCX plug right angle cable 3 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and right angle MMCX cable connection on the other. Our right angle MMCX to right angle MMCX cable assemblies have a plug gender on end 1 and plug on end 2. PE3W01180-3 can also be known as a right angle MMCX male to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. MMCX male to MMCX male cable assembly PE3W01180-3 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid MMCX cable assembly is manufactured with right angle MMCX to right angle MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency MMCX right angle plug to MMCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MMCX right angle male to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to MMCX cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to MMCX plug right angle cable 3 inch length using PE-047SR coax. | 1 : $130.99
25 : $124.44
50 : $117.89
100 : $112.65
|
| 1
|
PE3W01180/SP-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MMCX Plug Right Angle to MMCX Plug Right Angle Cable 12 Inch Length Using PE-047SR Coax with 180 Deg. Clock., Radio frequency assembly MMCX plug right angle to MMCX plug right angle cable 12 inch length using PE-047SR coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to MMCX plug right angle cable 12 inch length using PE-047SR coax with 180 deg. clock, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and right angle MMCX cable connection on the other. Our right angle MMCX to right angle MMCX cable assemblies have a plug gender on end 1 and plug on end 2. PE3W01180/SP-12 can also be known as a right angle MMCX male to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. MMCX male to MMCX male cable assembly PE3W01180/SP-12 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid MMCX cable assembly is manufactured with right angle MMCX to right angle MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency MMCX right angle plug to MMCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MMCX right angle male to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to MMCX cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to MMCX plug right angle cable 12 inch length using PE-047SR coax with 180 deg. clock. | 1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01
|
| 1
|
PE3W01180/SP-6
| Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. MMCX Plug Right Angle to MMCX Plug Right Angle Cable 6 Inch Length Using PE-047SR Coax with 180 Deg. Clock., Radio frequency assembly MMCX plug right angle to MMCX plug right angle cable 6 inch length using PE-047SR coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to MMCX plug right angle cable 6 inch length using PE-047SR coax with 180 deg. clock, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and right angle MMCX cable connection on the other. Our right angle MMCX to right angle MMCX cable assemblies have a plug gender on end 1 and plug on end 2. PE3W01180/SP-6 can also be known as a right angle MMCX male to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. MMCX male to MMCX male cable assembly PE3W01180/SP-6 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid MMCX cable assembly is manufactured with right angle MMCX to right angle MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency MMCX right angle plug to MMCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MMCX right angle male to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to MMCX cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to MMCX plug right angle cable 6 inch length using PE-047SR coax with 180 deg. clock. | 1 : $166.99
25 : $158.64
50 : $150.29
100 : $143.61
|
| 1
|
PE3W00118/PH180
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to BNC Male Right Angle Cable Using LMR-100 Coax with 180 Deg. Clock. PE3W00118/PH180 is a BNC male right angle to BNC male right angle cable using LMR-100A coax. This Pasternack BNC male right angle to BNC male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. BNC right angle to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00118/PH180 BNC male right angle to BNC male right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3C7401-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to SMA Male Cable 18 Inch Length Using PE-SR405AL Coax., Radio frequency assembly 2.92mm male to SMA male cable 18 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMA male cable 18 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and SMA cable connection on the other. Our 2.92mm to SMA cable assembly has male gender on end 1 and male on end 2. PE3C7401-18 can also be known as a 2.92mm plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 2.92mm plug to SMA plug cable assembly PE3C7401-18 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to SMA cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has solder/solder attachment method and stainless steel body with gold plating.Additional dimensions, specifications and CAD drawings for this PE3C7401-18 RF cable are available on our downloadable PDF datasheet.PE3C7401-18 can also be used in the other direction and will be SMA male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMA cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm RF cable assembly as per your requirements. | 1 : $184.99
25 : $175.74
50 : $166.49
100 : $159.09
|
| 0
|
PE3W01184
| Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. 3.5mm Male to 1.85mm Female Bulkhead Cable Using PE-SR405AL Coax. PE3W01184 is a 3.5mm male to 1.85mm female bulkhead cable using PE-SR405AL coax. This Pasternack 3.5mm male to 1.85mm female bulkhead cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm 1.85mm for connector 2. Our male 3.5mm to female 1.85mm bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W01184 3.5mm male to 1.85mm female bulkhead cable assembly is constructed with PE-SR405AL coax. | | 0
|
PE3W00118LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to BNC Male Right Angle Cable Using LMR-100 Coax, LF Solder. PE3W00118LF is a BNC male right angle to BNC male right angle cable using LMR-100A coax. This Pasternack BNC male right angle to BNC male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. BNC right angle to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00118LF BNC male right angle to BNC male right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3W01180/HS/PH180
| Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to MMCX Plug Right Angle Cable Using PE-047SR Coax with HeatShrink and 180 Deg. Clock. PE3W01180/HS/PH180 is a MMCX plug right angle to MMCX plug right angle cable using PE-047SR coax. This Pasternack MMCX plug right angle to MMCX plug right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MMCX for connector 2. MMCX right angle to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to plug MMCX right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W01180/HS/PH180 MMCX plug right angle to MMCX plug right angle cable assembly is constructed with PE-047SR coax. | | 0
|
PE3W01180LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to MMCX Plug Right Angle Cable Using PE-047SR Coax, LF Solder. PE3W01180LF is a MMCX plug right angle to MMCX plug right angle cable using PE-047SR coax. This Pasternack MMCX plug right angle to MMCX plug right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MMCX for connector 2. MMCX right angle to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to plug MMCX right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W01180LF MMCX plug right angle to MMCX plug right angle cable assembly is constructed with PE-047SR coax. | | 0
|
TE Connectivity | 170011-8
| TE Connectivity | RING STRIP 18-14 MM2 0.503 X 11.938 TPBR Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 18 – 14 AWG Wire Size: .8 – 2 mm² Wire Size: 2050 – 5180 CMA Stud Size: #8 M4 Closed Ring Tongue Terminal 18 – 14 AWG .8 – 2 mm² 2050 – 5180 CMA | Ring Terminal | Part Number: 170011-8 | Internal Number: 170011-8 | TE Connectivity
RoHS : Compliant | 1,000 : $0.11
100 : $0.15
10 : $0.18
1 : $0.24
|
| 14,848
|
0409-201-1800
| TE Connectivity | CABLE CLAMP, 18SZ, AL Primary Product Material: Aluminum Automotive Connector Accessory Type: Cable Clamp Operating Temperature Range: -55 – 125 °C Operating Temperature Range: -67 – 257 °F Aluminum Cable Clamp | Automotive Connector Accessories | Part Number: 0409-201-1800 | Internal Number: 0409-201-1800 | Alias Number: ZPF000000000131689 | TE Connectivity
RoHS : Compliant | | 3,725
|
1SNG601185R0000
| TE Connectivity | EP-SG-PG7-GR-B Cable Gland Product Type: Cable Gland Cable Gland & Accessory Style: Standard Threaded Primary Product Material: PA 6 Clamping Diameter Range: 3 – 6.5 mm Primary Product Color: Gray Cable Gland Standard Threaded PA 6 3 – 6.5 mm | Plastic Cable Glands Without Locknut | Part Number: 1SNG601185R0000 | Internal Number: 1SNG601185R0000 | Gray | TE Connectivity
RoHS : Compliant | 2,500 : $0.47
1,000 : $0.49
500 : $0.5
250 : $0.51
100 : $0.53
50 : $0.54
25 : $0.55
10 : $0.56
1 : $0.58
|
| 3,333
|
5650118-3
| TE Connectivity | CONN SEC II 6 POS 100C/L R/A Connector System: Board-to-Board Number of Positions: 12 Centerline (Pitch): .1 in Centerline (Pitch): 2.54 mm Contact Current Rating (Max): 3 A Board-to-Board 12 .1" 2.54 mm | Card Edge Power Connector | Part Number: 5650118-3 | Internal Number: 5650118-3 | .1" | TE Connectivity
RoHS : Compliant | 1,000 : $3.24
500 : $3.37
250 : $3.54
50 : $3.93
25 : $4.2
10 : $4.47
1 : $5.27
|
| 1,929
|
5650118-1
| TE Connectivity | CONN SEC II 15 POS 100C/L R/A Connector System: Board-to-Board Number of Positions: 30 Centerline (Pitch): .1 in Centerline (Pitch): 2.54 mm Contact Current Rating (Max): 3 A Board-to-Board 30 .1" 2.54 mm | Card Edge Power Connector | Part Number: 5650118-1 | Internal Number: 5650118-1 | .1" | TE Connectivity
RoHS : Compliant | 1,000 : $6.01
500 : $6.18
250 : $6.37
100 : $6.58
50 : $6.77
1 : $7.43
|
| 219
|
5650118-2
| TE Connectivity | CONN SEC II 10 POS 100C/L R/A Connector System: Board-to-Board Number of Positions: 20 Centerline (Pitch): .1 in Centerline (Pitch): 2.54 mm Contact Current Rating (Max): 3 A Board-to-Board 20 .1" 2.54 mm | Card Edge Power Connector | Part Number: 5650118-2 | Internal Number: 5650118-2 | .1" | TE Connectivity
RoHS : Compliant | 1,000 : $4.87
500 : $5.01
250 : $5.16
100 : $5.34
50 : $5.49
1 : $6.03
|
| 3
|
Vyrian | MAL210118682E3
| Vishay Intertechnologies | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 6800uF, Chassis Mount
RoHS : Compliant | | 16,258
|
HEF4555BT-Q100,118
| NXP Semiconductors | Decoder/Driver, 4000/14000/40000 Series, True Output, CMOS, PDSO16 | | 11,708
|
5962-01-181-8197
 | Analog Devices Inc | Operational Amplifier, 1 Func, 1000uV Offset-Max, MBCY8
RoHS : Not Compliant | | 11,181
|
IRFR220,118
 | NXP Semiconductors | Power Field-Effect Transistor, 4.8A I(D), 200V, 0.8ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252 | | 10,383
|
M38510/11803SXA
| Analog Devices Inc | Adjustable Negative Standard Regulator, 1.2V Min, 37V Max, BIPolar, MBCY3
RoHS : Not Compliant | | 10,312
|
74HCT365D-Q100,118
 | Nexperia | Bus Driver, HCT Series, 1-Func, 6-Bit, True Output, CMOS, PDSO16
RoHS : Compliant | | 8,372
|
74HC366PW-Q100,118
 | Nexperia | Bus Driver, HC/UH Series, 1-Func, 6-Bit, Inverted Output, CMOS, PDSO16
RoHS : Compliant | | 6,525
|
M27V401-180L1TR
 | STMicroelectronics | | | 6,488
|
BLF7G20L-200,118
 | NXP Semiconductors | Power Field-Effect Transistor, 1-Element, N-Channel, Metal-oxide Semiconductor FET
RoHS : Compliant | | 5,030
|
74HC151D-Q100,118
| Nexperia | Multiplexer, HC/UH Series, 1-Func, 8 Line Input, 1 Line Output, Complementary Output, CMOS, PDSO16
RoHS : Compliant | | 4,948
|
MCP1501-18E/SN
 | Microchip Technology Inc | Three Terminal Voltage Reference, 1 Output, 1.8V, PDSO8
RoHS : Compliant | | 4,362
|
5962-01-181-6755
| Texas Instruments | Line Driver/Receiver, 4 Driver, BIPolar, CDFP16
RoHS : Not Compliant | | 3,940
|
PSMN011-80YS
| NXP Semiconductors | Power Field-Effect Transistor, 67A I(D), 80V, 0.011ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MO-235
RoHS : Compliant | | 806
|
TJA1022T/20,118
 | NXP Semiconductors | Interface Circuit, PDSO14 | | 701
|
74HCT4051D-Q100,118
| NXP Semiconductors | Differential Multiplexer, 1 Func, 8 Channel, CMOS, PDSO16
RoHS : Compliant | | 640
|
Waytek, Inc. | 190220118
| Molex | 12-10GA Male Disconnect .250 X .032 Non-Insulated | 100 : $0.1416
200 : $0.1287
500 : $0.1144
1,000 : $0.1039
5,000 : $0.0992
|
| 7,314
|
880118
| Cole Hersee | 250A 4 X 5/16 Stud Busbar 48V LIKE BLUESEA BUS BAR BUSSBAR | 1 : $108.63
5 : $104.82
10 : $101.5
20 : $96.78
50 : $93.59
100 : $90.61
|
| 0
|
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand