 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
016ERLK-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Pasternack Enterprises US | PE3C10165-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Female to Trimmed Lead Cable 60 Inch Length Using RG142 Coax., Radio frequency assembly BNC female to trimmed lead cable 60 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to trimmed lead cable 60 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a trimmed lead cable connection on the other. Our BNC to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C10165-60 can also be known as a BNC jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.97-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10165-60 RF cable has a FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 70 dB. BNC jack to trimmed lead sexless cable assembly PE3C10165-60 is built with RG142 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to trimmed lead cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10165-60 can also be used in the other direction and will be a trimmed lead sexless to BNC female cable assembly if the opposite connectivity is required. BNC jack to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to trimmed lead cable assembly for quick shipment worldwide. Variations of BNC and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to Trimmed Lead RF cable assembly as per your requirements. |
| 166 | |
| PE51RD1016 | Pasternack Enterprises | Key Specifications, Antenna Type: Rubber Duck, Polarization: Linear, Minimum Frequency: 2.4 GHz, Maximum Frequency: 2.5 GHz, Connector 1 Polarity: Reverse Polarity, Connector Series: TNC, Connector Gender: Male, Impedance: 50 Ohm, Maximum Input VSWR: 2:1. |
| 32 | ||
| PE33001-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to N Male Cable 60 Inch Length Using RG401 Coax., Radio frequency assembly SMA male to N male cable 60 inch length using RG401 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male cable 60 inch length using RG401 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE33001-60, can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE33001-60 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33001-60 can also be used in the other direction and will be N type male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 60 inch length using RG401 coax. |
| 20 | ||
| PE70A5016 | Pasternack Enterprises | Key Specifications, Design: TTL Controlled, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, VSWR Maximum: 3:1, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Series 2: 2.92mm, Connector Gender 2: Female. 100 MHz to 40 GHz Absorptive Digital Step Attenuator, 15.5 dB, 5 Bits, 0.5 dB Step Size, Field Replaceable 2.92mm. Pasternack's PE70A5016 is a programmable attenuator available in a TTL controlled design. Our radio frequency attenuator comes with field replaceable 2.92mm connectors and has a 50 Ohm impedance. This TTL controlled digital attenuator has 9 dB and 7 dB maximum and typical insertion loss respectively. This 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. Pasternack’s attenuator with field replaceable 2.92mm connectors has a female gender for input and output ports. PE70A5016 programmable step attenuator has a typical attenuation of 16.5 dB with a 0.5 dB step sizes. This bidirectional RF attenuator has an aluminum body with gold plating. Our programmable RF attenuator has a frequency range of 100 MHz to 40 GHz and a maximum VSWR of 3:1. The bench-top active digital attenuator from Pasternack has 5-bit control along with 100 MHz ns typical switching time. Our PE70A5016 TTL controlled programmable attenuator has an operating temperature range from -40 deg C to 85 deg C. This programmable radio frequency attenuator is ideal for test & measurement, military and commercial communications and military electronic systems and research & development applications. Our attenuator PE70A5016 is shipped from an ISO 9001:2015 certified facility the same day as purchased. This RF programmable attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality TTL controlled programmable digital attenuator that meets your requirements. |
| 5 | ||
| PE82P5016 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: N, Connector Out Gender: Female, Maximum VSWR: 1.5:1, Maximum Insertion Loss: 1.5 dB, Maximum Power: 100 Watts, Peak Power: 5,000 Watts. Adjustable Phase Shifter, DC to 8GHz, With an Adjustable Phase of 90 Deg. Per GHz with N-type connector. Pasternack adjustable phase shifter PE82P5016 is part of our large selection of in-stock RF, microwave and millimeter wave components available for purchase. This adjustable phase shifter is manufactured with N connectors and has a phase adjustment of 90 degrees. Our N adjustable phase shifter has a minimum frequency of DC and a maximum frequency of 8 GHz. N coaxial RF variable phase shifter has a maximum input power of 100 watts and a maximum VSWR of 1.5:1. PE82P5016 coaxial N adjustable phase shifter is one of over 40,000 RF components supplied by Pasternack. Our variable phase shifter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 2 | ||
| PE3C0162LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using RG400 Coax, LF Solder. PE3C0162LF is a BNC male to BNC male cable using RG400 coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0162LF BNC male to BNC male cable assembly is constructed with RG400 coax. | 0 | |||
| PE3C0169LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using LMR-195 Coax with HeatShrink, LF Solder. PE3C0169LF/HS is a N male right angle to N male right angle cable using LMR-195 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0169LF/HS N male right angle to N male right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W00169-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. SMA Male Right Angle to TNC Female Bulkhead Cable 50 cm Length Using PE-SR402FL Coax., Radio frequency assembly SMA male right angle to TNC female bulkhead cable 50 cm length using PE-SR402FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to TNC female bulkhead cable 50 cm length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and TNC bulkhead cable connection on the other. Our right angle SMA to TNC cable assemblies have a male gender on end 1 and female on end 2. This SMA to TNC cable is a male to female coax assembly, PE3W00169-50CM, can also be known as a right angle SMA plug to TNC jack cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC jack cable assembly PE3W00169-50CM is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA right angle male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00169-50CM can also be used in the other direction and will be TNC female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC female bulkhead cable 50 cm length using PE-SR402FL coax. |
| 0 | ||
| PE3W01616LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. SMA Male Right Angle to SMA Female Bulkhead Cable Using 53 Ohm RG55 Coax, RoHS. PE3W01616LF is a SMA male right angle to SMA female bulkhead cable using RG55 coax. This Pasternack SMA male right angle to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA bulkhead cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W01616LF SMA male right angle to SMA female bulkhead cable assembly is constructed with RG55 coax. | 0 | |||
| PE3W01645 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to N Male Cable Using PE-P195 Coax. PE3W01645 is a reverse polarity SMA male to N male cable using PE-P195 coax. This Pasternack reverse polarity SMA male to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity male SMA to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01645 SMA reverse polarity male to N male cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3W01661/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to N Male Cable 100 CM Length Using LMR-200 Coax with HeatShrink., Radio frequency assembly SMA male to N male cable 100 cm length using LMR-200 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male cable 100 cm length using LMR-200 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our SMA to N type cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3W01661/HS-100CM, can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3W01661/HS-100CM is built with LMR-200 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01661/HS-100CM can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 100 cm length using LMR-200 coax with heatshrink. |
| 0 | ||
| PE3W01661/HS-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. SMA Male to N Male Cable 50 CM Length Using LMR-200 Coax with HeatShrink., Radio frequency assembly SMA male to N male cable 50 cm length using LMR-200 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male cable 50 cm length using LMR-200 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our SMA to N type cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3W01661/HS-50CM, can also be known as a SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W01661/HS-50CM is built with LMR-200 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01661/HS-50CM can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 50 cm length using LMR-200 coax with heatshrink. |
| 0 | ||
| PE3W01661LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. N Male to SMA Male Cable Using LMR-200 Coax, LF Solder. PE3W01661LF is a N male to SMA male cable using LMR-200 coax. This Pasternack N male to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01661LF N male to SMA male cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W01667-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female Bulkhead to MCX Plug Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly SMA female bulkhead to MCX plug cable 36 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to MCX plug cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and MCX cable connection on the other. Our SMA to MCX cable assemblies have a female gender on end 1 and plug on end 2. PE3W01667-36 can also be known as a SMA jack to MCX male cable assembly and will be shipped same-day as it is purchased. SMA jack to MCX male cable assembly PE3W01667-36 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA female bulkhead to MCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01667-36 can also be used in the other direction and will be MCX plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to MCX plug cable 36 inch length using RG316 coax. |
| 0 | ||
| PE3W01690 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female Bulkhead to Reverse Polarity SMA Female Bulkhead Cable Using RG316 Coax. PE3W01690 is a reverse polarity SMA female bulkhead to reverse polarity SMA female bulkhead cable using RG316 coax. This Pasternack reverse polarity SMA female bulkhead to reverse polarity SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity female SMA bulkhead to reverse polarity female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01690 SMA reverse polarity female bulkhead to SMA reverse polarity female bulkhead cable assembly is constructed with RG316 coax. | 0 | |||
 TE Connectivity | 163301-6 | TE Connectivity | MATENLOK PIN Contact Mating Area Plating Material: Tin (Sn) Contact Type: Pin Wire Contact Termination Area Plating Material: Tin-Lead Wire Size: 20 – 17 AWG Wire Size: .5 – 1 mm² Tin (Sn) Pin Tin-Lead 20 – 17 AWG | TE Connectivity RoHS : Compliant |
| 26,716 | |
| 1060-16-0644 | TE Connectivity | PIN, SF, SIZE 16, 16-20, AU/SN Terminal Type: Pin Wire Size: 20 – 16 AWG Wire Size: .5 – 1 mm² Interface Plating: Gold (Au) Primary Locking Feature: Integrated in Housing Pin 20 – 16 AWG .5 – 1 mm² Gold (Au) | TE Connectivity RoHS : Compliant |
| 12,000 | ||
| 1060-16-1244 | TE Connectivity | PIN, SF, SIZE 16, 12-16, AU/SN Terminal Type: Pin Wire Size: 16 – 12 AWG Wire Size: 1. – 2.5 mm² Interface Plating: Gold (Au) Primary Locking Feature: Integrated in Housing Pin 16 – 12 AWG 1. – 2.5 mm² Gold (Au) | TE Connectivity RoHS : Compliant |
| 9,600 | ||
| 1-2834016-2 | TE Connectivity | 2POS 2.54MM SES CONN. Number of Positions: 2 Terminal Block Connector Type: Receptacle Connector System: Wire-to-Board Centerline (Pitch): .1 in Centerline (Pitch): 2.54 mm Ampseal Header | 2 Receptacle Wire-to-Board .1" | .1" | TE Connectivity RoHS : Compliant |
| 9,430 | ||
| 1060-16-0722 | TE Connectivity | PIN, SF, SIZE 16, 14-18, NI/SN Terminal Type: Pin Wire Size: 18 – 14 AWG Wire Size: .75 – 2 mm² Interface Plating: Nickel (Ni) Primary Locking Feature: Integrated in Housing Pin 18 – 14 AWG .75 – 2 mm² Nickel (Ni) | TE Connectivity RoHS : Compliant |
| 8,000 | ||
| 1-480701-6 | TE Connectivity | 03P UMNL CAP HSG BLU Number of Positions: 3 Connector & Housing Type: Cap Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Wire-to-Panel Ampseal Header | 3 Cap Housing Crimp | TE Connectivity RoHS : Compliant |
| 2,226 | ||
| 1-2040016-2 | TE Connectivity | DYNAMIC D4200 TAB CONT S LONG Contact Mating Area Plating Material: Gold (Au) Contact Type: Tab Wire Size: 20 – 16 AWG Wire Size: .5 – 1.42 mm² Product Terminates To: Wire & Cable Gold (Au) Tab 20 – 16 AWG .5 – 1.42 mm² | TE Connectivity RoHS : Compliant |
| 1,346 | ||
| 1-160301-6 | TE Connectivity | 250 FASTON,REC.,10-12 AWG,TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 10 – 12 AWG Wire Size: 4 – 6 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 10 – 12 AWG 4 – 6 mm² | Quick Disconnect | TE Connectivity RoHS : Compliant |
| 1,239 | ||
| 100161-1 | TE Connectivity | Z-PACK/C F-HDR 55P PCB Connector Type: PCB Mount Receptacle Data Rate: ≤1 Gb/s Number of Columns: 11 Number of Rows: 5 Backplane Architecture: Mezzanine PCB Mount Receptacle ≤1 Gb/s 11 5 | TE Connectivity RoHS : Compliant |
| 740 | ||
| 1-6450162-2 | TE Connectivity | MBXL R/A RCPT 4P+12S PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Co-Planar Number of Positions: 16 PCB Mount Receptacle Right Angle Board-to-Board Perpendicular | Ampseal Header | TE Connectivity RoHS : Compliant |
| 600 | ||
| 1-5747301-6 | TE Connectivity | 37 RCPT SP/FMS SCRLK Number of Positions: 37 Connector & Housing Type: Receptacle Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 4 Ampseal Header | 37 Receptacle Board-to-Board Board Mount | TE Connectivity RoHS : Compliant |
| 573 | ||
| 1028-016-0005 | TE Connectivity | ADPTR, BKSHL, 2,3,4P, BLK, RA,NW 7.5/8.5 Number of Positions: 3 4 2 Primary Product Color: Black Protection & Strain Relief Accessory Type: Backshell Primary Product Material: PBT Cable Exit Angle: 90 ° 3 Black | PBT | TE Connectivity RoHS : Compliant |
| 404 | ||
| 1-6450160-0 | TE Connectivity | MBXL R/A RCPT 2P+24S+2P PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Co-Planar Number of Positions: 28 PCB Mount Receptacle Right Angle Board-to-Board Perpendicular | Ampseal Header | TE Connectivity RoHS : Compliant |
| 301 | ||
| 1-66101-6 | TE Connectivity | III+ SKT,18-16,TIN-LEAD,SMPACK Contact Mating Area Plating Material: Tin-Lead Contact Type: Socket Wire Contact Termination Area Plating Material: Tin-Lead Wire Size: 18 – 16 AWG Wire Size: .8 – 1.4 mm² Tin-Lead Socket 18 – 16 AWG | TE Connectivity RoHS : Compliant |
| 134 | ||
| 1-201692-1 | TE Connectivity | CNTR FASTENER PLUG BLOCK,104P Number of Positions: 104 Connector & Housing Type: Plug Connector Product Type: Housing Mating Retention: With Mating Retention Type: Center Fastener 104 Plug Housing With | TE Connectivity RoHS : Compliant |
| 22 | ||
 Teledyne HiRel | M38510/01601BBA | Teledyne HiRel | AND GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | ||
| M38510/01601BAA | Teledyne HiRel | AND GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| M38510/01601BDA | Teledyne HiRel | AND GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| M38510/01601BCA | Teledyne HiRel | AND GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | C0402C0G101-680JNP | VENKEL LTD | Chip Capacitor;0402;C0G;100V;68pF;�5% RoHS : Compliant | 0 | ||
| C0505HQN101-6R4DNE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;100V;6.4pF;�0.5pF RoHS : Compliant | 0 | |||
| C0603HQN101-6R1CNP | VENKEL LTD | High-Q NP0 Capacitor;0603;HQN;100V;6.1pF;�0.25pF RoHS : Compliant | 0 | |||
| C0805C0G500-161JNP | VENKEL LTD | Chip Capacitor;0805;C0G;50V;160pF;�5% RoHS : Compliant | 0 | |||
| C0805HQN501-6R8BNP | VENKEL LTD | High-Q NP0 Capacitor;0805;HQN;500V;6.8pF;�0.1pF RoHS : Compliant | 0 | |||
C1206C0G101-681FNP | VENKEL LTD | Chip Capacitor;1206;C0G;100V;680pF;�1% RoHS : Compliant | 0 | |||
| C1206C0G101-6R8CNP | VENKEL LTD | Chip Capacitor;1206;C0G;100V;6.8pF;�0.25pF RoHS : Compliant | 0 | |||
| C1206C0G101-6R8DNE | VENKEL LTD | Chip Capacitor;1206;C0G;100V;6.8pF;�0.5pF RoHS : Compliant | 0 | |||
| C1206X7R101-683KNP | VENKEL LTD | Chip Capacitor;1206;X7R;100V;0.068uF;�10% RoHS : Compliant | 0 | |||
| C1210C0G201-680JNE | VENKEL LTD | HV Chip Capacitor;1210;C0G;200V;68pF;�5% RoHS : Compliant | 0 | |||
C1210X7R501-681KNE | VENKEL LTD | HV Chip Capacitor;1210;X7R;500V;680pF;�10% RoHS : Compliant | 0 | |||
| C1825C0G201-682JNE | VENKEL LTD | HV Chip Capacitor;1825;C0G;200V;6800pF;�5% RoHS : Compliant | 0 | |||
C1825X7R501-683KNE | VENKEL LTD | HV Chip Capacitor;1825;X7R;500V;0.068uF;�10% RoHS : Compliant | 0 | |||
| AGC0603C0G101-681JNP | VENKEL LTD | Auto Grade Capacitor;0603;C0G;100V;680pF;�5% RoHS : Compliant | 0 | |||
| AGC0805C0G101-6R8CNP | VENKEL LTD | Auto Grade Capacitor;0805;C0G;100V;6.8pF;�0.25pF RoHS : Compliant | 0 | |||
 Waytek, Inc. | AT60-16-0144 | Amphenol Sine Systems | AT Series Gold-Plated,Male Stamped & Formed,Contact (Waytek Disco'd) (4K on Reel) |
| 16,000 | |
| AT60-16-0144 | Amphenol Sine Systems | Amphenol Sine Systems AT60-16-0144 A Series male pin terminal is a size 16, gold-plated copper alloy contact for 18-16 gauge wire. Designed as a Deutsch 1060-16-0144 and DT Series drop-in replacement, it supports sealed AT connector assemblies. |
| 12,994 | ||
| 54001627 | Aptiv PLC | Apex 150 Terminal 18-16 Female Terminal Reel |
| 10,000 | ||
| 7100163861 | 3M | 12-10 GA #6 Spade Terminal Insulated Vinyl |
| 6,992 | ||
| 7100163898 | 3M | 22-18GA Male Disconnect Red Nylon .187 X. 020 Fully Insulated |
| 3,559 | ||
| 7100163808 | 3M | Male Tab .250 Disconnect With #8 Stud |
| 2,972 | ||
| 7100165201 | 3M | 16-14GA .156 Male Bullet Blue Nylon |
| 2,342 | ||
| 54001627 | Aptiv PLC | Apex 150 Terminal 18-16 Female Terminal Loose |
| 2,232 | ||
| 7100164284 | 3M | 22-18GA Heat Shrink Snap Spade #10 STUD |
| 474 | ||
| C01620D00311012 | Amphenol Sine Systems | Amphenol Sine Systems C01620D00311012 ecomate plastic female straight cable connector has 3+PE contacts, screw termination, and internal cable clamping. Rated 16A at 400V with IP65/IP67 sealing, it uses a black backshell and 6-12.5 mm cable range. |
| 456 | ||
| 7100163799 | 3M | 16-14GA Female Disconnect .187 x .020 High Temp Terminal |
| 394 | ||
| C01620G00310012 | Amphenol Sine Systems | Amphenol Sine Systems C01620G00310012 ecomate plastic female receptacle has 3+PE contacts, screw termination, and silver-plated contacts. Rated 16A at 400V with IP65/IP67 sealing, it provides a panel-mount mating interface for ecomate male cable connectors. |
| 277 | ||
| 2016066163 | Molex | High Current Universal Clamp Terminal Block, 6-1/0GA, 35mm DIN-rail MT, 600V, 3 Pole,150A RoHS : Compliant |
| 74 | ||
0011010168 | Molex | Molex MLX Extraction TOOL 0011010168 REPLACED PN 534 TYCO 1804030-1 RoHS : Compliant |
| 65 | ||
| 940-016P | AFC Cable Systems Inc | Fitting For 1/2" Liquid Tight Conduit, Right Non-Metallic |
| 6 | ||
 Wuhan P&S | FDPC8016S | onsemi | Asymmetric 2N-Ch PowerTrench MOSFET,25V RoHS : Compliant |
| 48,000 | |
| T51D107M016C0050 | Vishay Intertechnologies | vPolyTanTM Polymer Surface-Mount Chip Capacitors RoHS : Compliant |
| 5,000 | ||
| T52E5157M016C0050 | Vishay Intertechnologies | vPolyTanTM Polymer Surface Mount Chip Capacitors RoHS : Compliant |
| 4,800 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand