02AHL-AF5-R Price, Distributor, Stock

Key Specifications, Generic Name: 141 Semi-rigid, Flex Type: Semi-Rigid, Impedance: 50 Ohm, Dielectric Type: PTFE, No. of Shields: 1, Attenuation at 1 Ghz.: 13 dB, Power, Max at 1 Ghz.: 450 Watts, Frequency, Max: 36 GHz, Max Operating Temperature: 125 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, Repeated: 0.15 in, Coax Type: Coax. 141 Semi-rigid Coax Cable with Tinned Aluminum. PE-SR402AL part number from Pasternack is a 141 Semi-rigid coax cable that is semi-rigid. Pasternack PE-SR402AL semi-rigid coax cable is 50 Ohm and has a PTFE dielectric.PE-SR402AL coax has a shield count of 1 and the maximum frequency for this Pasternack cable is 36 GHz. PE-SR402AL coax cable has an attenuation at 1 GHz of 13 dB and a maximum power of 450 watts at 1 GHz. Pasternack 141 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-SR402AL cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-SR402AL or other coax can be built and shipped same day as well.

1 : $18.19
25 : $17.28
50 : $16.37
100 : $15.64

1,088

PE-SR402AL-STRAIGHT

Pasternack Enterprises

Key Specifications, Generic Name: 141 Semi-rigid, Flex Type: Semi-Rigid, Impedance: 50 Ohm, Dielectric Type: PTFE, Jacket Diameter: 0.141 in, No. of Shields: 1, Attenuation at 1 Ghz.: 13 dB, Frequency, Max: 36 GHz, Max Operating Temperature: 125 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, One Time: 0.1 in, Coax Type: Coax. 141 Semi-rigid Coax Cable with Tinned Aluminum Outer Conductor. PE-SR402AL-STRAIGHT part number from Pasternack is a 141 Semi-rigid coax cable that is semi-rigid. Pasternack PE-SR402AL semi-rigid coax cable is 50 Ohm and has a PTFE dielectric. Our PE-SR402AL coax is constructed with a 0.141 jacket. PE-SR402AL coax has a shield count of 1 and the maximum frequency for this Pasternack cable is 36 GHz. PE-SR402AL coax cable has an attenuation at 1 GHz of 13 dB. Pasternack 141 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-SR402AL cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-SR402AL or other coax can be built and shipped same day as well.

1 : $17.99
25 : $17.09
50 : $16.19
100 : $15.47

846

PE-SR402AL-STR-BULK

Pasternack Enterprises

Key Specifications, Generic Name: 141 Semi-rigid, Flex Type: Semi-Rigid, Impedance: 50 Ohm, Dielectric Type: PTFE, Velocity of Propagation: 69.5 %, Jacket Diameter: 0.141 in, No. of Shields: 1, Attenuation at 1 Ghz.: 13 dB, Frequency, Max: 36 GHz, Max Operating Temperature: 125 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, One Time: 0.1 in, Coax Type: Coax. 141 Semi-rigid Coax Cable (by foot) with Tinned Aluminum Outer Conductor. PE-SR402AL-STR-BULK part number from Pasternack is a 141 Semi-rigid coax cable that is semi-rigid. Pasternack PE-SR402AL semi-rigid coax cable is 50 Ohm and has a PTFE dielectric. Our PE-SR402AL coax is constructed with a 0.141 jacket. PE-SR402AL coax has a shield count of 1 and the maximum frequency for this Pasternack cable is 36 GHz. PE-SR402AL coax cable has an attenuation at 1 GHz of 13 dB. Pasternack 141 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-SR402AL cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-SR402AL or other coax can be built and shipped same day as well.

1 : $21.89
25 : $21.01
50 : $20.36
100 : $19.92

149

PE-SR402AL-BULK

Pasternack Enterprises

Key Specifications, Generic Name: 141 Semi-rigid, Flex Type: Semi-Rigid, Impedance: 50 Ohm, Dielectric Type: PTFE, Velocity of Propagation: 69.5 %, No. of Shields: 1, Attenuation at 1 Ghz.: 13 dB, Power, Max at 1 Ghz.: 450 Watts, Frequency, Max: 36 GHz, Max Operating Temperature: 125 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, Repeated: 0.15 in, Coax Type: Coax. 141 Semi-rigid Coax Cable with Tinned Aluminum. PE-SR402AL-BULK part number from Pasternack is a 141 Semi-rigid coax cable that is semi-rigid. Pasternack PE-SR402AL semi-rigid coax cable is 50 Ohm and has a PTFE dielectric. PE-SR402AL coax has a shield count of 1 and the maximum frequency for this Pasternack cable is 36 GHz. PE-SR402AL coax cable has an attenuation at 1 GHz of 13 dB and a maximum power of 450 watts at 1 GHz. Pasternack 141 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-SR402AL cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-SR402AL or other coax can be built and shipped same day as well.

1 : $18.19
25 : $17.28
50 : $16.37
100 : $15.64

PE-W15B002A

Pasternack Enterprises

Key Specifications, Type of Bend: H-Bend, Waveguide Size 1: WR-15, Flange Size 1: UG-385/U, Flange Size 2: UG-385/U, Frequency, Min: 50 GHz, Frequency, Max: 75 GHz. WR-15 Waveguide H-Bend Instrumentation Grade Using UG-385/U Flange With a 50 GHz to 75 GHz Frequency Range. PE-W15B002A is a WR-15 waveguide bend that is a H-Bend type with a UG-385/U flange. Our WR-15 waveguide bend has a minimum frequency of 50 GHz and a maximum frequency of 75 GHz. WR-15 waveguide bend PE-W15B002A is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This WR-15 H-Bend waveguide with UG-385/U flange can ship worldwide the same day as it is purchased as with our other available RF parts.

1 : $427.99
5 : $410.87
10 : $393.75
25 : $376.63

PE-W12AT002A-30

Pasternack Enterprises

Key Specifications. Minimum Frequency 60 GHz Maximum Frequency 90 GHz Typical Attenuation Value, Min 0 dB Typical Attenuation Value, Max 30 dB Insertion Loss 0.4 dB Maximum Input Power 2 Watt VSWR 1.15:1. WR-12 Waveguide Continuously Variable Attenuator, 0 to 30 dB, from 60 GHz to 90 GHz, UG-387/U Round Cover Flange, Dial., Pasternack’s Continuously Variable Waveguide Attenuators are offered for the frequency range of 18 to 110 GHz in different waveguide bands. The attenuation value of the Continuously Variable attenuators are from 0 to 30 dB with full waveguide operational bandwidth. The Continuously Variable attenuators are equipped with a micrometer, which enables rapid re-setting. With calibrated charts, attenuators can be used as direct reading attenuator for bench top test set use. The level setting attenuators are typically used in the test setups and prototype assemblies where certain attenuation is required.

1 : $3,000.0
5 : $2,880.0
10 : $2,760.0
25 : $2,640.0

PE-W10B002A

Pasternack Enterprises

Key Specifications, Type of Bend: H-Bend, Waveguide Size 1: WR-10, Flange Size 1: UG-387/U-M, Waveguide Size 2: WR-10, Flange Size 2: UG-387/U-M, Frequency, Min: 75 GHz, Frequency, Max: 110 GHz. WR-10 Instrumentation Grade Waveguide H-Bend with UG-387/U-M Flange Operating from 75 GHz to 110 GHz. PE-W10B002A is a WR-10 waveguide bend that is a H-Bend type with a UG-387/U-M flange. This WR-10 H-Bend waveguide with UG-387/U-M flange from Pasternack is instrumentation grade. Our WR-10 instrumentation grade waveguide bend has a minimum frequency of 75 GHz and a maximum frequency of 110 GHz. WR-10 waveguide bend PE-W10B002A is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This instrumentation grade WR-10 H-Bend waveguide with UG-387/U-M flange can ship worldwide the same day as it is purchased as with our other available RF parts.

1 : $743.99
10 : $714.23
25 : $684.47
100 : $654.71

PEWCA1002A

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-51, Coax Connector Impedance: 50 Ohm, Coax Connector Series: SMA, Coax Connector Gender: Female, Waveguide Adapter Style: Right Angle, Minimum Frequency: 15 GHz, Maximum Frequency: 22 GHz. WR-51 Square Cover Flange to SMA Female Waveguide to Coax Adapter Operating from 15 GHz to 22 GHz. PEWCA1002A WR-51 waveguide to coax adapter is also known as a WR-51 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR51 to SMA connector and has a female gender. Our WR51 to SMA female waveguide adapter transition has a right angle design and has a square cover flange. Pasternack right angle WR-51 to SMA waveguide to coaxial cable transition / adapter has a minimum frequency of 15 GHz and a maximum frequency of 22 GHz. WR51 waveguide to SMA transition adapter to coax PEWCA1002A is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-51 waveguide adapter transition with SMA interface can ship worldwide the same day that it is purchased as with our other available RF parts.

1 : $1,020.0
5 : $979.2
10 : $938.4
25 : $897.6

PE-W42B002A

Pasternack Enterprises

Key Specifications, Type of Bend: H-Bend, Waveguide Size 1: WR-42, Flange Size 1: UG-595/U, Waveguide Size 2: WR-42, Flange Size 2: UG-595/U, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz. WR-42 Instrumentation Grade Waveguide H-Bend with UG-595/U Flange Operating from 18 GHz to 26.5 GHz. PE-W42B002A is a WR-42 waveguide bend that is a H-Bend type with a UG-595/U flange. This WR-42 H-Bend waveguide with UG-595/U flange from Pasternack is instrumentation grade. Our WR-42 instrumentation grade waveguide bend has a minimum frequency of 18 GHz and a maximum frequency of 26.5 GHz. WR-42 waveguide bend PE-W42B002A is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This instrumentation grade WR-42 H-Bend waveguide with UG-595/U flange can ship worldwide the same day as it is purchased as with our other available RF parts.

1 : $479.99
10 : $460.79
25 : $441.59

PE-W137S002A-6

Pasternack Enterprises

Key Specifications, Waveguide Size 1: WR-137, Waveguide Size 2: WR-137, Length: 0 inches, Frequency, Min: 5.85 GHz, Frequency, Max: 8.2 GHz, Flange Type 1: CPR-137G, Flange Type 2: CPR-137G. WR-137 Straight Waveguide Section 6 Inch Length, CPR-137G Grooved Flange from 5.85 GHz to 8.2 GHz. Pasternack's PE-W137S002A-6 is a 0-inch WR-137 straight waveguide section that operates from 5.85 GHz to 8.2 GHz. This straight waveguide section offers a maximum 1.03:1 VSWR. The input and output of this straight waveguide section are cpr-137g. PE-W137S002A-6 is part of over 40,000 RF, microwave and millimeter wave components. The WR-137 straight waveguide section will ship worldwide the same day it is purchased along with our other RF components. Our straight waveguide section has waveguide sizes of WR-137 on both sides. The WR-137 waveguide section in straight design is 0 inches in length. This WR-137 waveguide section is made of paint plated copper alloy waveguide material. Make your online purchase right now to take advantage of our same-day shipping. This waveguide section has cpr-137g made of copper alloy for its input and output. Additional dimensions and specifications for this WR-137 straight waveguide section are in our downloadable PDF datasheet. Our RF, microwave and millimeter wave products maintain a 99.4% availability and are part of the broadest selection in the industry. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality WR-137 straight waveguide section that meets your requirements.

1 : $636.99
10 : $611.51
25 : $586.03
100 : $560.55