0400FCNUWNTZCWC Price, Distributor, Stock

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm. Fire Rated N Male Right Angle to N Female Bulkhead Low Loss Cable Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male right angle to N female bulkhead low loss cable using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male right angle to N female bulkhead low loss cable using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss right angle a type N to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10400 can also be known as a low loss right angle type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10400 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. Type N plug to type N jack cable assembly PE3C10400 is built with TCOM-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10400 can also be used in the other direction and will be type N female bulkhead to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.

144

PE3C10400-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated N Male Right Angle to N Female Bulkhead Low Loss Cable 12 Inch Length Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male right angle to N female bulkhead low loss cable 12 inch length using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male right angle to N female bulkhead low loss cable 12 inch length using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss right angle a type N to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10400-12 can also be known as a low loss right angle type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10400-12 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. Type N plug to type N jack cable assembly PE3C10400-12 is built with TCOM-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10400-12 can also be used in the other direction and will be type N female bulkhead to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.

1 : $129.99
25 : $124.79
50 : $120.89
100 : $118.29

PE3M0400

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMZ, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-141FL-NM, RF Cable Type: Coax, RF Cable Specification: PE-141FL-NM datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 D38999 Contact Socket to BMZ Size 8 D38999 Contact Socket Cable Using PE-141FL-NM Coax with HeatShrink, LF Solder. The PE3M0400 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ socket contact connection on one end and a BMZ socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to BMZ cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0400 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ socket to BMZ socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. The PE3M0400 in-series RF cable has 0.375 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. BMZ socket to BMZ socket cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack PE3M0400 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to BMZ RF cable are available on our downloadable PDF datasheet. BMZ socket to BMZ socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to BMZ RF cable assembly as per your requirements.

PE3C10400-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated N Male Right Angle to N Female Bulkhead Low Loss Cable 48 Inch Length Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male right angle to N female bulkhead low loss cable 48 inch length using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male right angle to N female bulkhead low loss cable 48 inch length using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss right angle a type N to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10400-48 can also be known as a low loss right angle type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10400-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. Type N plug to type N jack cable assembly PE3C10400-48 is built with TCOM-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10400-48 can also be used in the other direction and will be type N female bulkhead to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.

1 : $153.99
25 : $147.83
50 : $143.21
100 : $140.13

PE3C10400-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated N Male Right Angle to N Female Bulkhead Low Loss Cable 60 Inch Length Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male right angle to N female bulkhead low loss cable 60 inch length using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male right angle to N female bulkhead low loss cable 60 inch length using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss right angle a type N to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10400-60 can also be known as a low loss right angle type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10400-60 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. Type N plug to type N jack cable assembly PE3C10400-60 is built with TCOM-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10400-60 can also be used in the other direction and will be type N female bulkhead to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.

1 : $161.99
25 : $155.51
50 : $150.65
100 : $147.41

PE3W04006/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Female to SMA Male Cable Using RG316 Coax with HeatShrink. PE3W04006/HS is a BNC female to SMA male cable using RG316 coax. This Pasternack BNC female to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our female BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04006/HS BNC female to SMA male cable assembly is constructed with RG316 coax.

PE3W20400/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: D-Subminiature, Connector 1 Gender: Receptacle, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. D-Sub Receptacle to MCX Plug Cable 24 Inch Length Using RG316 Coax with HeatShrink., Pasternack’s PE3W20400/HS-24 D-Subminiature receptacle to MCX plug RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The D-Subminiature receptacle to MCX plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom D-Subminiature to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a D-Subminiature cable connection on one end and a MCX cable connection on the other. Our D-Subminiature to MCX cable assembly has a receptacle gender on end 1 and a plug on end 2. PE3W20400/HS-24 can also be known as a D-Subminiature receptacle to MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W20400/HS-24 RF cable has an FEP jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. This PE3W20400/HS-24 D-Subminiature receptacle to MCX male cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible D-Subminiature cable assembly is manufactured with D-Subminiature to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20400/HS-24 can also be used in the other direction and will be a MCX plug to D-Subminiature receptacle cable assembly if the opposite connectivity is required. This D-Subminiature receptacle to MCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality D-Subminiature to MCX cable assembly for quick shipment worldwide. Variations of D-Subminiature and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal D-Subminiature to MCX RF cable assembly as per your requirements.

1 : $81.18
25 : $77.12
50 : $73.06
100 : $69.81

PE3MSA00400-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: JACK, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Halogen Free 3-Lug TRB Jack with Blunt Cut for 78 Ohm TWCH-78-2, 48" Cable., Radio frequency assembly halogen free 3-Lug TRB jack with blunt cut for 78 Ohm TWCH-78-2, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Halogen free 3-Lug TRB jack with blunt cut for 78 Ohm TWCH-78-2, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00400-48 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MSA00400-48 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00400-48 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this halogen free 3-Lug TRB jack with blunt cut for 78 Ohm TWCH-78-2, 48" cable.

1 : $153.99
25 : $146.29
50 : $138.59
100 : $132.43

PE3W04005

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using RG141 Coax. PE3W04005 is a SMA male to SMA male cable using RG141 coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04005 SMA male to SMA male cable assembly is constructed with RG141 coax.

PE3W04004LF

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. Mini SMP Female to Limited Detent SMP Male Bulkhead Cable Using PE-SR405FL Coax, LF Solder. PE3W04004LF is a Mini SMP female to SMP male bulkhead cable using PE-SR405FL coax. This Pasternack Mini SMP female to SMP male bulkhead cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMP for connector 2. Our female Mini SMP to male SMP bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W04004LF Mini SMP female to SMP male bulkhead cable assembly is constructed with PE-SR405FL coax.

PE3MSA00400-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: JACK, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Halogen Free 3-Lug TRB Jack with Blunt Cut for 78 Ohm TWCH-78-2, 12" Cable., Radio frequency assembly halogen free 3-Lug TRB jack with blunt cut for 78 Ohm TWCH-78-2, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Halogen free 3-Lug TRB jack with blunt cut for 78 Ohm TWCH-78-2, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00400-12 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MSA00400-12 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00400-12 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this halogen free 3-Lug TRB jack with blunt cut for 78 Ohm TWCH-78-2, 12" cable.

1 : $143.99
25 : $136.79
50 : $129.59
100 : $123.83

PE3W04006

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Female to SMA Male Cable Using RG316 Coax. PE3W04006 is a BNC female to SMA male cable using RG316 coax. This Pasternack BNC female to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our female BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04006 BNC female to SMA male cable assembly is constructed with RG316 coax.

PE3W20400/HS-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: D-Subminiature, Connector 1 Gender: Receptacle, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. D-Sub Receptacle to MCX Plug Cable 72 Inch Length Using RG316 Coax with HeatShrink., Pasternack’s PE3W20400/HS-72 D-Subminiature receptacle to MCX plug RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The D-Subminiature receptacle to MCX plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom D-Subminiature to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a D-Subminiature cable connection on one end and a MCX cable connection on the other. Our D-Subminiature to MCX cable assembly has a receptacle gender on end 1 and a plug on end 2. PE3W20400/HS-72 can also be known as a D-Subminiature receptacle to MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W20400/HS-72 RF cable has an FEP jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. This PE3W20400/HS-72 D-Subminiature receptacle to MCX male cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible D-Subminiature cable assembly is manufactured with D-Subminiature to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this 72-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20400/HS-72 can also be used in the other direction and will be a MCX plug to D-Subminiature receptacle cable assembly if the opposite connectivity is required. This D-Subminiature receptacle to MCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality D-Subminiature to MCX cable assembly for quick shipment worldwide. Variations of D-Subminiature and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal D-Subminiature to MCX RF cable assembly as per your requirements.

1 : $101.94
25 : $96.84
50 : $91.75
100 : $87.67

PE3W04004

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. Limited Detent SMP Male Bulkhead to Mini SMP Female Cable Using PE-SR405FL Coax. PE3W04004 is a SMP male bulkhead to Mini SMP female cable using PE-SR405FL coax. This Pasternack SMP male bulkhead to Mini SMP female cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm Mini SMP for connector 2. Our male SMP bulkhead to female Mini SMP cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W04004 SMP male bulkhead to Mini SMP female cable assembly is constructed with PE-SR405FL coax.

PE3W20400/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: D-Subminiature, Connector 1 Gender: Receptacle, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. D-Sub Receptacle to MCX Plug Cable 12 Inch Length Using RG316 Coax with HeatShrink., Pasternack’s PE3W20400/HS-12 D-Subminiature receptacle to MCX plug RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The D-Subminiature receptacle to MCX plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom D-Subminiature to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a D-Subminiature cable connection on one end and a MCX cable connection on the other. Our D-Subminiature to MCX cable assembly has a receptacle gender on end 1 and a plug on end 2. PE3W20400/HS-12 can also be known as a D-Subminiature receptacle to MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W20400/HS-12 RF cable has an FEP jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. This PE3W20400/HS-12 D-Subminiature receptacle to MCX male cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible D-Subminiature cable assembly is manufactured with D-Subminiature to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20400/HS-12 can also be used in the other direction and will be a MCX plug to D-Subminiature receptacle cable assembly if the opposite connectivity is required. This D-Subminiature receptacle to MCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality D-Subminiature to MCX cable assembly for quick shipment worldwide. Variations of D-Subminiature and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal D-Subminiature to MCX RF cable assembly as per your requirements.

1 : $75.99
25 : $72.19
50 : $68.39
100 : $65.35

TE Connectivity

EW60-1A3-BL12D04,00000

TE Connectivity

EW60-1A3-BL12D04,00000 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Bistable, 1 Coil, Polarized, Latching Contact Arrangement: 1 Form A SPST-NO Contact Current Rating: 67 A General Purpose Power Relay DC Bistable, 1 Coil, Polarized, Latching 1 Form A SPST-NO | Electromechanical Relay | Part Number: EW60-1A3-BL12D04,00000 | Internal Number: 2071366-1 | EW60-1A3-BL12D04,00000 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Bistable, 1 Coil, Polarized, Latching Contact Arrangement: 1 Form A SPST-NO Contact Current Rating: 67 A General Purpose Power Relay DC Bistable, 1 Coil, Polarized, Latching 1 Form A SPST-NO | Electromechanical Relay | Part# EW60-1A3-BL12D04,00000
RoHS : Compliant

250 : $30.51
100 : $31.73
50 : $32.96
25 : $34.17
10 : $35.39
1 : $36.61

2,832

1604001-3

TE Connectivity

120A SGL POLE HSG SUBASY,WHITE Number of Positions: 1 Connector & Housing Type: Receptacle Plug Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Standard Rectangular Connector | 1 Receptacle Housing | Part Number: 1604001-3 | Internal Number: 1604001-3 | TE Connectivity
RoHS : Compliant

1,000 : $3.03
500 : $3.12
250 : $3.22
100 : $3.32
50 : $3.42
1 : $3.75

1,557

8PCV-04-006

TE Connectivity

8PCV-04-006=#8 TRIBARRIER Number of Positions: 4 Barrier Strip Style: Tri-Barrier Bottom Termination Type: Printed Circuit Pin Connector System: Wire-to-Board Centerline (Pitch): .438 in Barrier Strip | 4 Tri-Barrier Printed Circuit Pin Wire-to-Board | Part Number: 8PCV-04-006 | Internal Number: 8-1437657-0 | Alias Number: 1240101 | .438" | TE Connectivity
RoHS : Compliant

2,500 : $4.21
1,000 : $4.32
500 : $4.44
250 : $4.55
100 : $4.66
50 : $4.78
25 : $4.89
10 : $5.01
1 : $5.12

1,416

1-2040016-2

TE Connectivity

DYNAMIC D4200 TAB CONT S LONG Contact Mating Area Plating Material: Gold (Au) Contact Type: Tab Wire Size: 20 – 16 AWG Wire Size: .5 – 1.42 mm² Product Terminates To: Wire & Cable Gold (Au) Tab 20 – 16 AWG .5 – 1.42 mm² | Contact: Component To Wire 22-24A & 16-10 Wire Size | Part Number: 1-2040016-2 | Internal Number: 1-2040016-2 | TE Connectivity
RoHS : Compliant

25,000 : $1.7
10,000 : $1.73
5,000 : $1.77
2,500 : $1.8
1,000 : $1.83
500 : $1.87
250 : $1.9
100 : $1.94
50 : $1.97
25 : $2.01
10 : $2.04
1 : $2.08

1,346

EW60-1A3-CL12D04,00000

TE Connectivity

EW60-1A3-CL12D04,00000 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Bistable, 2 Coils, Polarized, Latching Contact Arrangement: 1 Form A SPST-NO Contact Current Rating: 67 A General Purpose Power Relay DC Bistable, 2 Coils, Polarized, Latching 1 Form A SPST-NO | Electromechanical Relay | Part Number: EW60-1A3-CL12D04,00000 | Internal Number: 2071366-2 | EW60-1A3-CL12D04,00000 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Bistable, 2 Coils, Polarized, Latching Contact Arrangement: 1 Form A SPST-NO Contact Current Rating: 67 A General Purpose Power Relay DC Bistable, 2 Coils, Polarized, Latching 1 Form A SPST-NO | Electromechanical Relay | Part# EW60-1A3-CL12D04,00000
RoHS : Compliant

250 : $31.27
100 : $32.53
50 : $33.78
25 : $35.03
10 : $36.27
1 : $37.52

180

T4052127004-002

TE Connectivity

RPC-M8-4MS-1.0-M12-4FS-PUR Cable Assembly Type: M8 to M12 Number of Positions: 4 Cable Assembly Length: 1 m Cable Assembly Length: 3.2 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 4 1 m 3.2 ft | M8 Male Straight To M12 Female Straight Double Ended Assembly | Part Number: T4052127004-002 | Internal Number: T4052127004-002 | TE Connectivity
RoHS : Compliant

100 : $26.44
50 : $27.71
25 : $28.95
10 : $30.23
1 : $31.48

T2040002010-000

TE Connectivity

CMF-1.0 Contact Mating Area Plating Material: Silver (Ag) Contact Type: Socket Wire Contact Termination Area Plating Material: Silver Wire Size: 18 AWG Wire Size: .75 mm² Silver (Ag) Socket 18 AWG | Connector Contact | Part Number: T2040002010-000 | Internal Number: T2040002010-000 | TE Connectivity
RoHS : Compliant

1,000 : $2.69
500 : $2.77
250 : $2.85
100 : $2.94
50 : $3.02
25 : $3.1
10 : $3.18
1 : $3.26

T4061310004-005

TE Connectivity

M8 CABLE ST FEMALE 5M 4POS PVC CABLE Cable Assembly Type: M8 Pigtail Number of Positions: 4 Cable Assembly Length: 5 m Cable Assembly Length: 16.4 ft M8/M12 Application Type: Sensor/Actuator M8 Pigtail 4 5 m 16.4 ft | M8 Cable Assembly & Single End & Female & Straight | Part Number: T4061310004-005 | Internal Number: T4061310004-005 | TE Connectivity
RoHS : Compliant

25 : $35.31
10 : $38.04
1 : $40.75

T4162214004-001

TE Connectivity

RPC-M12-4MR-0.5SH-M12-4FR-PVC Cable Assembly Type: M12 to M12 Number of Positions: 4 Cable Assembly Length: .5 m Cable Assembly Length: 1.6 ft M8/M12 Application Type: Sensor/Actuator M12 to M12 4 .5 m 1.6 ft | M12 A-Code Male To Female Double Ended Cable | Part Number: T4162214004-001 | Internal Number: T4162214004-001 | TE Connectivity
RoHS : Compliant

100 : $49.91
50 : $52.29
25 : $54.66
10 : $57.04
1 : $59.41

T4162223004-005

TE Connectivity

RPC-M12-4MR-5.0SH-M12-4FS-PUR Cable Assembly Type: M12 to M12 Number of Positions: 4 Cable Assembly Length: 5 m Cable Assembly Length: 16.4 ft M8/M12 Application Type: Sensor/Actuator M12 to M12 4 5 m 16.4 ft | M12 A-Code Mr-Fs Double Ended Cable | Part Number: T4162223004-005 | Internal Number: T4162223004-005 | TE Connectivity
RoHS : Compliant

25 : $75.75
10 : $81.59
1 : $87.41

T2040002040-000

TE Connectivity

CMF-4.0 Contact Mating Area Plating Material: Silver (Ag) Contact Type: Socket Wire Contact Termination Area Plating Material: Silver Wire Size: 12 AWG Wire Size: 4 mm² Silver (Ag) Socket 12 AWG | Connector Contact | Part Number: T2040002040-000 | Internal Number: T2040002040-000 | TE Connectivity
RoHS : Compliant

1,000 : $2.83
500 : $2.91
250 : $3.0
100 : $3.08
50 : $3.17
25 : $3.25
10 : $3.34
1 : $3.43

2040008-2

TE Connectivity

INDUSTRIAL MINI I/O PLUG KIT D2-WHITE L Modular Jacks & Plugs Products: Industrial Mini I/O Connector Contact Density: High Modular Connector Style: Plug Shielded: Yes Performance Category: Cat 5e Industrial Mini I/O High Plug | Mini I/o Cable Plug Type 2 Solder | Part Number: 2040008-2 | Internal Number: 2040008-2 | TE Connectivity
RoHS : Compliant

100 : $20.01
50 : $20.96
25 : $21.91
10 : $22.86
1 : $23.83

T2040011040-000

TE Connectivity

DMM-4.0 Contact Mating Area Plating Material: Gold (Au) Contact Type: Pin Wire Contact Termination Area Plating Material: Gold Wire Size: 12 AWG Wire Size: 4 mm² Gold (Au) Pin 12 AWG | Connector Contact | Part Number: T2040011040-000 | Internal Number: T2040011040-000 | TE Connectivity
RoHS : Compliant

1,000 : $7.04
500 : $7.25
250 : $7.46
100 : $7.68
50 : $7.89
25 : $8.1
10 : $8.32
1 : $8.53

T2040001040-000

TE Connectivity

CMM-4.0 Contact Mating Area Plating Material: Silver (Ag) Contact Type: Pin Wire Contact Termination Area Plating Material: Silver Wire Size: 12 AWG Wire Size: 4 mm² Silver (Ag) Pin 12 AWG | Connector Contact | Part Number: T2040001040-000 | Internal Number: T2040001040-000 | TE Connectivity
RoHS : Compliant

1,000 : $2.83
500 : $2.91
250 : $3.0
100 : $3.08
50 : $3.17
25 : $3.25
10 : $3.34
1 : $3.43

T2040012040-000

TE Connectivity

DMF-4.0 Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Wire Size: 12 AWG Wire Size: 4 mm² Gold (Au) Socket 12 AWG | Connector Contact | Part Number: T2040012040-000 | Internal Number: T2040012040-000 | TE Connectivity
RoHS : Compliant

1,000 : $9.79
500 : $10.08
250 : $10.38
100 : $10.68
50 : $10.97
25 : $11.27
10 : $11.57
1 : $11.86

Venkel Ltd.

TA025TCR226MCR0400

VENKEL LTD

Tantalum Chip Capacitor;25V;TCR;22uF;20%;C;400mohm
RoHS : Compliant

1,000

TA020TCR156MCR0400

VENKEL LTD

Tantalum Chip Capacitor;20V;TCR;15uF;20%;C;400mohm
RoHS : Compliant

TA6R3TCR107MBR0400

VENKEL LTD

Tantalum Chip Capacitor;6.3V;TCR;100uF;20%;B;400mohm
RoHS : Compliant

TA050TCR106MER0400

VENKEL LTD

Tantalum Chip Capacitor;50V;TCR;10uF;20%;E;400mohm
RoHS : Compliant

TA020TCR156KCR0400

VENKEL LTD

Tantalum Chip Capacitor;20V;TCR;15uF;10%;C;400mohm
RoHS : Compliant

TA6R3TCR107KBR0400

VENKEL LTD

Tantalum Chip Capacitor;6.3V;TCR;100uF;10%;B;400mohm
RoHS : Compliant

TA010TCR107MBR0400

VENKEL LTD

Tantalum Chip Capacitor;10V;TCR;100uF;20%;B;400mohm
RoHS : Compliant

TA050PCJ684MBR0400

VENKEL LTD

Polymer Tantalum Cap J-Lead;50V;PCJ;0.68uF;�20%;B;400mR
RoHS : Compliant

TA063PCJ474MBR0400

VENKEL LTD

Polymer Tantalum Cap J-Lead;63V;PCJ;0.47uF;�20%;B;400mR
RoHS : Compliant

TA016TCR226KBR0400

VENKEL LTD

Tantalum Chip Capacitor;16V;TCR;22uF;10%;B;400mohm
RoHS : Compliant

TA025TCR226KCR0400

VENKEL LTD

Tantalum Chip Capacitor;25V;TCR;22uF;10%;C;400mohm
RoHS : Compliant

TA020TCR226MBR0400

VENKEL LTD

Tantalum Chip Capacitor;20V;TCR;22uF;20%;B;400mohm
RoHS : Compliant

TA020TCR226MCR0400

VENKEL LTD

Tantalum Chip Capacitor;20V;TCR;22uF;20%;C;400mohm
RoHS : Compliant

TA035TCR226KDR0400

VENKEL LTD

Tantalum Chip Capacitor;35V;TCR;22uF;10%;D;400mohm
RoHS : Compliant

TA050TCR106KER0400

VENKEL LTD

Tantalum Chip Capacitor;50V;TCR;10uF;10%;E;400mohm
RoHS : Compliant

Vyrian

QSH-040-01-L-D-DP-A-K

Samtec Inc

Board Stacking Connector, 80 Contact(s), 2 Row(s), Female, Straight, 0.02 inch Pitch, Surface Mount Terminal, Socket
RoHS : Compliant

10,970

5962-01-040-0005

Analog Devices Inc

Operational Amplifier, 1 Func, 80uV Offset-Max, BIPolar, MBCY8
RoHS : Not Compliant

10,706

37200400431

Littelfuse Inc

Electric Fuse, Time Lag Blow, 0.04A, 250VAC, 35A (IR), Through Hole, TR5
RoHS : Compliant

8,845

1727040037

Molex

D Subminiature Connector, 8 Contact(s), Male, Locking
RoHS : Compliant

8,379

QSE-040-01-C-D-A-K-TR

Samtec Inc

Board Stacking Connector, 80 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Socket
RoHS : Compliant

7,982

T4162223004-005

TE Connectivity

Cable Assembly, 22AWG, 250V, Communication Cable
RoHS : Compliant

7,954

BC025-05-A-0200-0200-0400-L-G

Global Connector Technology

Board Stacking Connector, 5 Contact(s), 1 Row(s), Male, Straight, 0.039 inch Pitch, Solder Terminal, Locking, Black Insulator
RoHS : Compliant

6,408

PSR071UL0400Z

Littelfuse Inc

Electric Fuse, Fast Blow, 400A, 1300VAC, 1000VDC, 100000A (IR), Inline/holder
RoHS : Compliant

4,706

PSR032US0400X

Littelfuse Inc

Electric Fuse, Fast Blow, 400A, 700VAC, 600VDC, 200000A (IR), Inline/holder
RoHS : Compliant

4,483

PTH04000WAZ

Texas Instruments

DC-DC Regulated Power Supply Module, 1 Output, 9.9W, Hybrid
RoHS : Compliant

4,216

QSE-040-01-H-D-A-RT1-K

Samtec Inc

Board Stacking Connector
RoHS : Compliant

820

EQCD-040-04.00-TBR-STR-1-S

Samtec Inc

Cable Assembly, 80 Conductor(s), 38AWG, 225V, Communication Cable
RoHS : Compliant

480

2M804-001-06NF10-2SA

Amphenol Corporation

MIL Series Connector, 2 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Plug
RoHS : Not Compliant

381

2M804-003-07Z110-2PA

Amphenol Corporation

MIL Series Connector, 2 Contact(s), Stainless Steel, Male, Crimp Terminal, Receptacle
RoHS : Compliant

205

MAP110-4004C

Melcher

AC-DC Regulated Power Supply Module, 4 Output, 110W, Hybrid

193

Waytek, Inc.

12020400-L

Aptiv PLC

Pack-Con Series III Female 12 GA 12020400 Loose Terminal

50 : $0.4084
200 : $0.3879
500 : $0.3634
1,000 : $0.3511

10,251

67004-0012

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #12 Band 1/2" 1/2" TO 1-1/4"

10 : $1.8745
50 : $1.6662
100 : $1.5119
200 : $1.4657
500 : $1.4117
1,000 : $1.3577

3,037

67004-0016

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #16 Band 1/2" 11/16" TO 1-1/2"

10 : $1.9746
50 : $1.7625
100 : $1.5993
200 : $1.5503
500 : $1.4932
1,000 : $1.436

2,637

67004-0010

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #10 Band 1/2" 1/2" TO 1-1/16"

10 : $2.0152
50 : $1.7913
100 : $1.6254
200 : $1.5757
500 : $1.5176
1,000 : $1.4595

2,370

67004-0064

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #64 Band 1/2" disc way, no repl

5 : $3.3002
50 : $2.77
100 : $2.611
200 : $2.4386
500 : $2.3326

1,155

670040032052

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #32 Band 1/2" 1-1/2" TO 2-1/2"

10 : $2.2086
50 : $1.9632
100 : $1.7814
200 : $1.7268
500 : $1.6632
1,000 : $1.5996

996

67004-0006

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #6 Band 1/2" 3/8 to 7/8

10 : $1.8745
50 : $1.6662
100 : $1.5119
200 : $1.4657
500 : $1.4117
1,000 : $1.3577

874

67004-0008

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #8 Band 1/2" 7/16 TO 1N

10 : $1.9116
50 : $1.6992
100 : $1.5419
200 : $1.4947
500 : $1.4397
1,000 : $1.3846

803

67004-0044

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #44 Band 1/2" 1-1/4" TO 3-1/4"

10 : $2.4285
50 : $2.1686
100 : $1.9687
200 : $1.8989
500 : $1.8389
1,000 : $1.7688

500

01550400Z

Littelfuse Inc

30A ATO Stackable Panel Mount Fuse Holder 10 ga Orange AFH2BP

1 : $4.3386
10 : $4.1718
50 : $4.0382
100 : $3.8214
200 : $3.6879
500 : $3.5709

425

67004-0056

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #56 Band 1/2" 2" TO 4"

5 : $3.1911
50 : $2.6805
100 : $2.5017
200 : $2.3486
500 : $2.2465

420

67004-0028

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #28 Band 1/2" 1-1/4" TO 2-1/4"

10 : $2.1577
50 : $1.9258
100 : $1.7476
200 : $1.694
500 : $1.6316
1,000 : $1.5692

164

67004-0024

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #24 Band 1/2" 1" TO 2"

10 : $2.1404
50 : $1.9104
100 : $1.7335
200 : $1.6804
500 : $1.6185
1,000 : $1.5566

113

1800-E1-1-2E-0400-12

40A Circuit Breaker 32V ABYC UL Panel Mount Manual Reset UL 1500 SAE J1428 120VAC

1 : $20.49
5 : $18.3
10 : $17.11
50 : $16.11
100 : $15.37
200 : $14.64

670040036052

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #36 Band 1/2" 3/4" TO 2-3/4"

10 : $2.4247
50 : $2.1554
100 : $1.9558
200 : $1.896
500 : $1.826
1,000 : $1.7563

Win Source Electronics

Q13FC1350000400

Epson Electronics America Inc

Crystal 0.032768MHz ±20ppm (Tol) 12.5pF FUND 70000Ohm 2-Pin CSMD T/R
RoHS : Compliant

3,220 : $0.0932
2,580 : $0.097
1,985 : $0.1008
1,385 : $0.1084
895 : $0.1122
420 : $0.1197

157,250

0510210400

Molex

CONN RCPT HSG 4POS 1.25MM
RoHS : Compliant

19,740 : $0.017
14,710 : $0.019
11,365 : $0.0197
8,245 : $0.0204
5,350 : $0.0209
2,195 : $0.0255

106,400

TPS60400DBVRG4

Texas Instruments

IC REG CHARG PUMP INV 60MA SOT23
RoHS : Compliant

805 : $0.3728
645 : $0.3879
500 : $0.4031
350 : $0.4334
225 : $0.4485
105 : $0.4788

51,730

TPS60400DBVTG4

Texas Instruments

IC REG SWTCHD CAP INV 60MA SOT23
RoHS : Compliant

805 : $0.3728
645 : $0.3879
500 : $0.4031
350 : $0.4334
225 : $0.4485
105 : $0.4788

50,500

0430250400

Molex

CONN RCPT HSG 4POS 3.00MM
RoHS : Compliant

5,390 : $0.0624
4,030 : $0.0696
3,115 : $0.072
2,260 : $0.0744
1,460 : $0.0768
600 : $0.0935

46,070

B72530T0400K062

TDK Electronics

VARISTOR 68V 250A 1210 / Multilayer technology
RoHS : Compliant

3,580 : $0.0839
2,865 : $0.0873
2,210 : $0.0907
1,540 : $0.0975
995 : $0.101
465 : $0.1078

40,000

51191-0400

Molex

51191-0400 Molex Headers & Wire Housings 2.5 W/B HSG 2.5 W/B HSG datasheet, inventory, & pricing.
RoHS : Compliant

6,745 : $0.0445
5,035 : $0.0497
3,895 : $0.0514
2,825 : $0.0531
1,825 : $0.0548
750 : $0.0668

39,135

43045-0400

Molex

3.00mm (.118") Pitch Micro-Fit 3.0™ Header, Surface Mount Compatible, Dual Row, Right Angle, with Snap-in Plastic Peg PCB Lock, 4 Circuits
RoHS : Compliant

1,610 : $0.1864
1,290 : $0.194
995 : $0.2016
695 : $0.2167
450 : $0.2243
210 : $0.2394

33,205

QCC-3040-0-CSP90B-TR-01-0

Qualcomm

Bluetooth Audio SoC for Mono Earbud in 90 VFBGA

77 : $3.9394
57 : $4.394
44 : $4.5455
32 : $4.697
21 : $4.8485
9 : $5.9091

12,005

QSE-040-01-L-D-A

Samtec Inc

CONN RCPT 80POS SMD GOLD / 80 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold
RoHS : Compliant

44 : $6.8235
33 : $7.6108
26 : $7.8733
19 : $8.1357
12 : $8.3982
5 : $10.2352

12,000