1008F-R10G Price, Distributor, Stock

Southcos 56 Spring-Loaded Plungers provide convenient installation and removal of components. Activated with a simple pull these plungers offer simplified positioning of sliding component and quick-release for easy removal. The 56 series provides design

56-461-008

Southco

56-461-008

Essentra Components

Essentra Components

Essentra Components

RAF Electronic Hardware

100829

Pop Rivets

TAPD510BS 042 B5K

010080B018

Essentra Components

BINDER SLOTTED SCREW, 0-80 THR

010080B018B

Essentra Components

080 X 316 BINDER HEAD SLOT BLK

010080R012

Essentra Components

ROUND SLOTTED SCREW, 0-80 THRE

010080R012B

Essentra Components

080 X 18 ROUND HD SLOTTED BLK

FDH Electronics

801-008-16M10-26SA

Glenair Inc

Connector Misc
RoHS : Compliant

801-008-16M17-85PB

Glenair Inc

Connector
RoHS : Compliant

801-008-16M7-10PC

Glenair Inc

Connector
RoHS : Compliant

801-008-16M9-19PB

Glenair Inc

Circular Conn
RoHS : Compliant

801-008-16NF17-85PA

Glenair Inc

Circular Conn
RoHS : Not Compliant

801-008-16NF6-7PC

Glenair Inc

Connector
RoHS : Not Compliant

801-008-16NF7-25SA

Glenair Inc

Connector
RoHS : Not Compliant

801-008-26M13-37SA

Glenair Inc

Circular Conn
RoHS : Compliant

801-008-26NF21-130SC

Glenair Inc

Connector
RoHS : Not Compliant

801-008-26NF6-4PA

Glenair Inc

Connector
RoHS : Not Compliant

801-008-26NF7-10SB

Glenair Inc

Connector Acc
RoHS : Not Compliant

801-008-26NF9-19SA

Glenair Inc

Circular Conn
RoHS : Not Compliant

801-008-26ZNU10-26PA

Glenair Inc

Connector
RoHS : Not Compliant

390AB005NF1008M

Glenair Inc

Connector
RoHS : Not Compliant

222D152-100/86-0

TE Connectivity

Heat Shrink Prd

Pasternack Enterprises US

PE910082

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Nickel, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Nickel. Commercial Grade BNC Male to SMA Male Adapter., The commercial grade BNC to SMA adapter PE910082 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance. This RF adapter has a male to male gender configuration, which provides easier connections in tighter spaces. This BNC male to SMA male adapter is one of the many RF components that ship the same business day as they are ordered. The PE910082 male BNC to male SMA adapter has a straight body. This Pasternack BNC to SMA coax adapter is an in-line RF adapter in a commercial grade design. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. This commercial grade RF adapter has a 1.21-inch length, 0.62-inch width, and 0.4 lbs weight. The PE910082 adapter from Pasternack is made from a brass connector body and has a brass center contact. Our BNC male to SMA male radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. Additional dimensions and specifications for this between series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of BNC to SMA radio frequency commercial grade adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality RF adapter that meets your requirements.

1 : $16.39
5 : $16.06
10 : $15.73
25 : $15.41

415

PE3C10087

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 3.5mm Male to N Male Cable Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to N male cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to N male cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a type N cable connection on the other. Our a 3.5mm to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10087 can also be known as a 3.5mm plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to type N plug cable assembly PE3C10087 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10087 can also be used in the other direction and will be type N male to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements.

335

PE410-08030-206

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: TRB, Connector Gender: Plug, Impedance: 78 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 500 MHz, Interface Type 1: M17/176-00002. 78 Ohm TRB Plug 1553 Connector Crimp/Solder Attachment for M17/176-00002,. PE410-08030-206 TRB plug coaxial connector has an interface type of TRB plug M17/176-00002 and a 78 Ohm impedance.Pasternack TRB plug connector uses shield/contact crimp/solder as an attachment method. Our plug TRB coaxial connector provides a minimum frequency of DC and a maximum frequency of 500 MHz. The Pasternack TRB coaxial connector has a brass body with nickel plating. This TRB plug coaxial RF connector is REACH compliant. Our high quality PE410-08030-206 features a ASTM-B-733 body plating specification. We also build TRB custom connector cable assemblies that will ship the same day as well. Our TRB plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. For further information on similar products, our expert technical support and trained sales team can get you to the perfect RF connector as per your requirement.

1 : $48.19
25 : $45.78
50 : $43.37
100 : $41.44

232

PE910089

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Nickel, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Nickel. Commercial Grade SMA Female to BNC Female Adapter., The commercial grade SMA to BNC adapter PE910089 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance. This RF adapter has a female to female gender configuration, which provides easier connections in tighter spaces. This SMA female to BNC female adapter is one of the many RF components that ship the same business day as they are ordered. The PE910089 female SMA to female BNC adapter has a straight body. This Pasternack SMA to BNC coax adapter is an in-line RF adapter in a commercial grade design. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. This commercial grade RF adapter has a 0.88-inch length, 0.5-inch width, and 0.4 lbs weight. The PE910089 adapter from Pasternack is made from a brass connector body and has a brass center contact. Our SMA female to BNC female radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. Additional dimensions and specifications for this between series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of SMA to BNC radio frequency commercial grade adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality RF adapter that meets your requirements.

1 : $15.99
5 : $15.67
10 : $15.35
25 : $15.03

193

PE51FP1008-1

Pasternack Enterprises

Key Specifications, Antenna Type: RHCP Panel, Polarization: RHCP, Minimum Frequency: 902 MHz, Maximum Frequency: 928 MHz, Connector 1 Polarity: Reverse Polarity, Connector Series: SMA, Connector Gender: Plug, Impedance: 50 Ohm, Maximum Input VSWR: 1.5:1.

1 : $139.99
10 : $134.39
25 : $128.79
100 : $123.19

126

PE3C10087-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 3.5mm Male to N Male Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to N male cable 12 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to N male cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a type N cable connection on the other. Our a 3.5mm to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10087-12 can also be known as a 3.5mm plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to type N plug cable assembly PE3C10087-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10087-12 can also be used in the other direction and will be type N male to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements.

1 : $219.99
25 : $208.99
50 : $197.99
100 : $189.19

PE91008

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 26.5 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Passivated Stainless Steel, Connector Mount Method 2: None. Precision SMA Male to 2.92mm Female Adapter. SMA adapter PE91008 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our SMA to 2.92mm adapter is a between series coaxial adapter design. This 50 Ohm SMA adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 26.5 GHz. SMA male to 2.92mm female adapter is one of the many RF components that ship same day as they are ordered. PE91008 male SMA to female 2.92mm adapter has a straight body. This Pasternack straight SMA coax adapter is a in-line RF adapter. Our male SMA to female 2.92mm adapter PE91008 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This SMA to 2.92mm radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $341.99
10 : $328.31
25 : $314.63

PE3C10085

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 3.5mm Female Bulkhead to TNC Female Cable Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to TNC female cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to TNC female cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a TNC cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10085 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10085 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10085 can also be used in the other direction and will be TNC female to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

PE8DP1008

Pasternack Enterprises

Key Specifications, Filter Impedance: 75 Ohm, LP Passband Frequency, Min: 54 MHz, LP Passband Frequency, Max: 1 GHz, HP Passband Frequency, Min: 5 MHz, HP Passband Frequency, Max: 1 GHz, Connector Series: F, Connector Gender: Female, Connector Group: Threaded, Filter Length: 2.106 in, Filter Width: 1.783 in, Filter Height: 0.709 in, LP Return Loss, Min: 13 dB, HP Return Loss, Min: 13 dB, LP Insertion Loss, Max: 6 dB, HP Insertion Loss, Max: 1.8 dB. Diplexer 75 Ohm Type F Female, 5 to 1 GHz Data Band, 54 to 1 GHz TV Band., The Pasternack PE8DP1008 diplexer with 75 Ohm impedance is a passive RF device that enables frequency-domain multiplexing and covers different low-pass and high-pass frequency bands depending on the end-user applications. This is a 3-port device that has good insertion loss and VSWR performance with one low pass 54 MHz to 1 GHz frequency port, one high pass 5 MHz to 1 GHz frequency port, and one common port. Pasternack’s high pass 5 MHz to 1 GHz diplexer filter has a threaded type F female connector that is rugged and vibration resistant. The PE8DP1008 threaded type RF diplexer body has a polished surface finish that provides uniformity of surfaces and increases aesthetics. The filter has a 2.106 in length, a 1.783 in width, and a height of 0.709 in making it the best fit for satellite TV and cable TV applications. PE8DP1008 diplexer has a minimum low pass return loss of 13 dB, a minimum high pass return loss of 13 dB, maximum low pass insertion loss of 6 dB, and maximum high pass insertion loss of 1.8 dB which indicates that the line is well matched and gives better performance compared to the low-cost options in the market space. The body of this 75 Ohm RF diplexer with F female threaded type connectors is made of zinc. This Pasternack PE8DP1008 RF diplexer with 75 Ohm impedance is in stock and ready to ship the same day you order. Based on your specifications, our expert technical support and highly trained sales team can find the ideal 75 Ohm zinc diplexer with threaded type F female connector.

1 : $68.99
25 : $65.54
50 : $62.09
100 : $59.33

PE3C10080-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 3.5mm Female to TNC Male Cable 6 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female to TNC male cable 6 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female to TNC male cable 6 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and male on end 2. PE3C10080-6 can also be known as a 3.5mm jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC plug cable assembly PE3C10080-6 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10080-6 can also be used in the other direction and will be TNC male to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

1 : $199.99
25 : $189.99
50 : $179.99
100 : $171.99

PEWCA1008

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-90, Coax Connector Impedance: 50 Ohm, Coax Connector Series: N, Coax Connector Gender: Female, Waveguide Adapter Style: Right Angle, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.4 GHz. WR-90 UG-39/U Square Cover Flange to N Female Waveguide to Coax Adapter Operating from 8.2 GHz to 12.4 GHz. PEWCA1008 WR-90 waveguide to coax adapter is also known as a WR-90 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR-90 to N type connector and has a female gender. Our WR-90 to type N female waveguide adapter transition has a right angle design and has a square cover flange. Pasternack right angle WR-90 to type N waveguide to coaxial cable transition / adapter has a minimum frequency of 8.2 GHz and a maximum frequency of 12.4 GHz. WR 90 waveguide to type N transition adapter to coax PEWCA1008 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-90 waveguide adapter transition with type N interface can ship worldwide the same day that it is purchased as with our other available RF parts.

1 : $1,120.0
5 : $1,075.2
10 : $1,030.4

PE51MP1008

Pasternack Enterprises

Key Specifications, Antenna Type: Vehicular, Polarization: Linear, Vertical, Minimum Frequency: 440 MHz, Maximum Frequency: 480 MHz, Connector Series: NMO Mount, Impedance: 50 Ohm, Maximum Input VSWR: 2:1.

1 : $115.99
10 : $111.35
25 : $106.71
100 : $102.07

PE3C10089-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 3.5mm Male to N Female Cable 9 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to N female cable 9 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to N female cable 9 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a type N cable connection on the other. Our a 3.5mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10089-9 can also be known as a 3.5mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to type N jack cable assembly PE3C10089-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10089-9 can also be used in the other direction and will be type N female to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements.

1 : $225.99
25 : $214.69
50 : $203.39
100 : $194.35

PE3C10089-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 3.5mm Male to N Female Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to N female cable 12 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to N female cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a type N cable connection on the other. Our a 3.5mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10089-12 can also be known as a 3.5mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to type N jack cable assembly PE3C10089-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10089-12 can also be used in the other direction and will be type N female to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements.

1 : $227.99
25 : $216.59
50 : $205.19
100 : $196.07

PEWTR1008

Pasternack Enterprises

Key Specifications, Maximum Power: 5 Watt, Waveguide Size: WR-112, Minimum Frequency: 7.05 GHz, Maximum Frequency: 10 GHz.

1 : $725.0
5 : $696.0
10 : $667.0

Venkel Ltd.

C0805X7R100-823JNP

VENKEL LTD

Chip Capacitor;0805;X7R;10V;0.082uF;�5%
RoHS : Compliant

WRFI1008-S-15NGT

VENKEL LTD

Wirewound RF Inductor;1008;15nH;�2%
RoHS : Not Compliant

WRFI1008-S-2R7JT

VENKEL LTD

Wirewound RF Inductor;1008;2.7uH;�5%
RoHS : Not Compliant

WRFI1008-S-3R9GT

VENKEL LTD

Wirewound RF Inductor;1008;3.9uH;�2%
RoHS : Not Compliant

WRFI1008-S-75NKT

VENKEL LTD

Wirewound RF Inductor;1008;75nH;�10%
RoHS : Not Compliant

WRFI1008-S-R62KT

VENKEL LTD

Wirewound RF Inductor;1008;620nH;�10%
RoHS : Not Compliant

WRFI1008-S-R75GT

VENKEL LTD

Wirewound RF Inductor;1008;750nH;�2%
RoHS : Not Compliant

WRFI1008-S-15NKT

VENKEL LTD

Wirewound RF Inductor;1008;15nH;�10%
RoHS : Not Compliant

WRFI1008-S-1R2JT

VENKEL LTD

Wirewound RF Inductor;1008;1.2uH;�5%
RoHS : Not Compliant

WRFI1008-S-3R9KT

VENKEL LTD

Wirewound RF Inductor;1008;3.9uH;�10%
RoHS : Not Compliant

WRFI1008-S-82NGT

VENKEL LTD

Wirewound RF Inductor;1008;82nH;�2%
RoHS : Not Compliant

WRFI1008-S-R30JT

VENKEL LTD

Wirewound RF Inductor;1008;300nH;�5%
RoHS : Not Compliant

WRFI1008-S-R75KT

VENKEL LTD

Wirewound RF Inductor;1008;750nH;�10%
RoHS : Not Compliant

C0201HQN100-8R0CNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;10V;8pF;�0.25pF
RoHS : Compliant

WRFI1008-S-R68JT

VENKEL LTD

Wirewound RF Inductor;1008;680nH;�5%
RoHS : Not Compliant

Vyrian

801-008-26NF9-19SA

Glenair Inc

Circular Connector, 19 Contact(s), Aluminium Alloy, Female, Crimp Terminal, Plug
RoHS : Not Compliant

11,682

MT5C1008C-45L

Micron Technology Inc

Standard SRAM, 128KX8, 45ns, CMOS, CDIP32
RoHS : Not Compliant

7,103

MT5LC1008-20LP

Micron Technology Inc

Standard SRAM, 128KX8, 20ns, CMOS, PDIP32
RoHS : Not Compliant

6,652

MT5C1008DJ-45LPITTR

Micron Technology Inc

Standard SRAM, 128KX8, 45ns, CMOS, PDSO32
RoHS : Not Compliant

6,082

MT5C1008XDM3-20

Micron Technology Inc

Memory IC

6,021

MT5LC1008DJ-25IT

Micron Technology Inc

Standard SRAM, 128KX8, 25ns, CMOS, PDSO32
RoHS : Not Compliant

5,810

MT5C1008F20/883C

Micron Technology Inc

Standard SRAM, 128KX8, 20ns, CMOS, CDFP32
RoHS : Not Compliant

5,470

MT5C1008F55/883C

Micron Technology Inc

Standard SRAM, 128KX8, 55ns, CMOS, CDFP32
RoHS : Not Compliant

5,461

MT5C1008CW45L883C

Micron Technology Inc

Standard SRAM, 128KX8, 45ns, CMOS, CDIP32
RoHS : Not Compliant

4,802

MT5C1008DJ-35LPXT

Micron Technology Inc

Standard SRAM, 128KX8, 35ns, CMOS, PDSO32
RoHS : Not Compliant

4,700

MT5LC1008-45AT

Micron Technology Inc

Standard SRAM, 128KX8, 45ns, CMOS, PDIP32
RoHS : Not Compliant

4,507

MT5C1008CW55P/883C

Micron Technology Inc

Standard SRAM, 128KX8, 55ns, CMOS, CDIP32
RoHS : Not Compliant

3,292

MT5C1008DJ-35XT

Micron Technology Inc

Standard SRAM, 128KX8, 35ns, CMOS, PDSO32
RoHS : Not Compliant

2,922

MT5C1008EC-45IT

Micron Technology Inc

Standard SRAM, 128KX8, 45ns, CMOS, CQCC32
RoHS : Not Compliant

2,898

MT5C1008W-35AT

Micron Technology Inc

Standard SRAM, 128KX8, 35ns, CMOS, PDIP32
RoHS : Not Compliant

2,416

Win Source Electronics

046841033100846+

Kyocera Electronic Components & Devices

CONN FPC VERT 33POS 0.3MM SMD

455 : $0.8538
340 : $0.9521
265 : $0.9845
195 : $1.0181
125 : $1.0504
55 : $1.2807

144,400

ZXCT1008FTA

Diodes Incorporated

IC CURRENT MONITOR 1% SOT23-3
RoHS : Compliant

795 : $0.3788
595 : $0.4225
460 : $0.4371
335 : $0.4517
215 : $0.4662
90 : $0.5682

100,437

LTV-1008-TP-G

Lite-On Semiconductor Corporation

RoHS : Compliant

5,895 : $0.0509
4,405 : $0.0568
3,410 : $0.0587
2,475 : $0.0607
1,600 : $0.0626
660 : $0.0763

78,000

0451008.MRL

Littelfuse Inc

Fuse Chip Very Fast Acting 8A 125V SMD Solder Pad 2410 Ceramic T/R CE/CSA/PSE/UL / FUSE BRD MNT 8A 125VAC/VDC 2SMD
RoHS : Compliant

2,040 : $0.1474
1,525 : $0.1644
1,180 : $0.1701
855 : $0.1758
555 : $0.1815
230 : $0.2211

60,000

CPC1008N

IXYS Integrated Circuits Division

SSR RELAY SPST-NO 150MA 0-100V / Solid State SPST-NO (1 Form A) 4-SOP (0.150", 3.81mm)
RoHS : Compliant

146 : $2.0682
109 : $2.3069
84 : $2.3864
61 : $2.466
40 : $2.5455
17 : $3.1023

48,828

CPC1008NTR

IXYS Integrated Circuits Division

RELAY OPTOMOS SP-NO 150MA 4-SOP
RoHS : Compliant

146 : $2.0682
109 : $2.3069
84 : $2.3864
61 : $2.466
40 : $2.5455
17 : $3.1023

46,210

FSMD010-0805-R

Fuzetec Technology Co Ltd

RESETTABLE FUSE - SMD, 0805 SIZE

8,750 : $0.0343
6,530 : $0.0383
5,055 : $0.0396
3,670 : $0.0409
2,365 : $0.0423
975 : $0.0515

16,593

CLA4610-085LF

Skyworks Solutions Inc

RF DIODE PIN 120V 10W 3QFN / RF Diode PIN - Single 120V 100 mA 10 W 3-QFN (2x2)
RoHS : Compliant

21 : $14.797
17 : $15.3985
13 : $16.0
9 : $17.2031
6 : $17.8046
3 : $19.0076

10,000

744771008

Wurth Elektronik

POWER-CHOKE WE-PD | FIXED IND 8.2UH 6.25A 20 MOHM
RoHS : Compliant

295 : $1.1492
220 : $1.2818
170 : $1.326
125 : $1.3702
80 : $1.4144
35 : $1.7238

6,000

FPF1008

onsemi

IC PWR SWITCH P-CH 1:1 6MICROFET
RoHS : Compliant

16 : $19.5489
12 : $21.8046
9 : $22.5564
7 : $23.3083
5 : $24.0602
2 : $29.3234

3,500

NB7L1008MMNG

onsemi

IC CLK BUFFER 1:8 8GHZ 32QFN
RoHS : Compliant

13 : $23.9364
10 : $26.6982
8 : $27.6189
6 : $28.5395
4 : $29.4601
2 : $35.9045

3,189

AS6C1008-55SIN

Alliance Memory Inc

SRAM Chip Async Single 3V 1M-bit 128K x 8 55ns 32-Pin SOP Tube / IC SRAM 1MBIT 55NS 32SOP
RoHS : Compliant

35 : $8.797
26 : $9.8121
20 : $10.1504
15 : $10.4888
10 : $10.8271
4 : $13.1955

2,670

AS6C1008-55SINTR

Alliance Memory Inc

IC SRAM 1MBIT 55NS 32SOP
RoHS : Compliant

35 : $8.797
26 : $9.8121
20 : $10.1504
15 : $10.4888
10 : $10.8271
4 : $13.1955

2,440

65801-008LF

Amphenol Corporation

CONN FFC FPC RCPT 8POS 2.54MM / 8 Position FFC, FPC Connector Receptacle 0.100" (2.54mm) Free Hanging (In-Line)

335 : $0.9054
250 : $1.0098
195 : $1.0447
140 : $1.0795
90 : $1.1143
40 : $1.358

1,500

M5M51008DFP-55H

Renesas Electronics Corporation

RoHS : Compliant

79 : $4.2823
59 : $4.7765
46 : $4.9411
33 : $5.1059
22 : $5.2706
9 : $6.4234

949

1008F-R10G Distributor

Link URL