 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
108-2J-AF5-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Pasternack Enterprises US | PEWCP1084N-30 | Pasternack Enterprises | Key Specifications, Waveguide Size : WR-90, Flange Size: None, Flange Type : UG Cover, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.5 GHz, Maximum VSWR: 1.25:1, Coupling: 30 dB. WR-90 Waveguide 30 dB Crossguide Coupler, UG Cover Flange, N Female Coupled Port, 8.2 GHz to 12.5 GHz, Aluminum. The PEWCP1084N-30 is a 30 dB WR-90 three port crossguide coupler with intergrated N Female connector for the coupled port. This coupler can be mounted directly into the waveguide signal path, connected via coax to allow signal sampling /monitoring. The coupler has a typical VSWR of 1.1:1 and are made of Aluminum with UG Cover flanges. The PEWCP1084N-30 is part of a family of cross guide couplers offered by Pasternack with coupling values ranging from 20 to 50 dB. |
| 3 | |
| PE15A1089 | Pasternack Enterprises | Key Specifications, Gain: 43 dB, Power Output: 18 dBm P1dB, Frequency, Min: 1 GHz, Frequency, Max: 3.5 GHz, Design: Low Noise, Voltage, DC Max: 15 Volts, Connector Series: SMA. 1.0 dB NF Low Noise Amplifier, Operating from 1 GHz to 3.5 GHz with 43 dB Gain, 18 dBm P1dB and SMA. The PE15A1089 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This DC powered low noise amplifier has a female gender configuration for input and output ports. This SMA low noise amplifier has a minimum frequency of 1 GHz and maximum frequency of 3.5 GHz. The PE15A1089 low noise amplifier has 2:1 of typical VSWR (Voltage Standing Wave Ratio). This radio frequency amplifier has impressive typical performance that includes a very low noise figure of 1 dB, small signal gain of 43 dB, and gain flatness of 1 dB. Our 007 ADCC powered low noise amplifier is designed to operate on a 7/15 VDC voltage. The PE15A1089 007 low noise amplifier operates over the temperature range of -40 deg C and 85 deg C. This low noise amplifier has 18 dB of typical 1dB compression power and a maximum RF input power of 16 dBm. The Pasternack low noise amplifier features 115 mA typical DC current. Additional specs for this low noise amplifier can be found on its PDF specification datasheet and CAD drawings above. Our DC powered low noise radio frequency amplifier is part of over 40,000 RF, microwave, and millimeter wave components available from Pasternack. This coaxial low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect 007 DC powered low noise amplifier for your requirement. |
| 2 | ||
| PE3C10832-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: BZ4, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: PE-141FL-NM, RF Cable Type: PE-141FL-NM, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Female Bulkhead to BNC Female Bulkhead Non-Magnetic Cable 60 Inch Length Using PE-141FL-NM Coax., Pasternack’s PE3C10832-60 non-magnetic BNC female bulkhead to BNC female bulkhead RF cable assembly using PE-141FL-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3C10832-60 can also be known as a non-magnetic BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.375-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10832-60 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. This PE3C10832-60 BNC jack to BNC jack cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack formable BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a BZ4 body with copper-tin-zinc alloy plating. Additional dimensions, specifications, and CAD drawings for this 60-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC non-magnetic RF cable assembly as per your requirements. |
| 1 | ||
| PE3071/HS2-108 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 108 inches. N Male to N Male Right Angle Cable 108 Inch Length Using RG214 Coax with Double HeatShrink., Radio frequency assembly N male to N male right angle cable 108 inch length using RG214 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N male right angle cable 108 inch length using RG214 coax with double heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE3071/HS2-108 can also be known as a N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3071/HS2-108 is built with RG214 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 11 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3071/HS2-108 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Type N plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 108 inch length using RG214 coax with double heatshrink. |
| 0 | ||
| PE34538-108 | Pasternack Enterprises | Key Specifications, Connector Series 1: LC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: LC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm, Length: 108 inches. LC Male to LC Male Cable 108 Inch Length Using RG225 Coax., Radio frequency assembly LC male to LC male cable 108 inch length using RG225 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. LC male to LC male cable 108 inch length using RG225 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom LC to LC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with LC cable connection on one end and LC cable connection on the other. Our LC to LC cable assemblies have a male gender on end 1 and male on end 2. This LC to LC cable is a male to male coax assembly, PE34538-108, can also be known as a LC plug to LC plug cable assembly and will be shipped same-day as it is purchased. LC plug to LC plug cable assembly PE34538-108 is built with RG225 which is a flexible coax type. The Pasternack flexible LC cable assembly is manufactured with LC to LC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this LC male to LC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. LC plug to LC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality LC to LC cable assembly for quick shipment worldwide. Variations of LC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this LC male to LC male cable 108 inch length using RG225 coax. |
| 0 | ||
| PE3C10849-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Male to SMP Female Non-Magnetic Cable 6 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10849-6 non-magnetic 2.92mm male to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a 2.92mm cable connection on one end and an SMP cable connection on the other. Our 2.92mm to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10849-6 can also be known as a non-magnetic 2.92mm plug to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our 2.92mm male to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10849-6 2.92mm plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10849-6 can also be used in the other direction and will be an SMP female to 2.92mm male cable assembly if the opposite connectivity is required. This non-magnetic 2.92mm plug to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMP cable assembly for quick shipment worldwide. Variations of 2.92mm and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10871 | Pasternack Enterprises | 0 | ||||
| PE3C10891/HS | Pasternack Enterprises | 0 | ||||
| PE3W06108/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: C, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. C Female to N Female Cable Using RG214 Coax with HeatShrink. PE3W06108/HS is a C female to N female cable using RG214 coax. This Pasternack C female to N female cable assembly uses a 50 Ohm C for connector 1 and a 50 Ohm N for connector 2. Our female C to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06108/HS C female to N female cable assembly is constructed with RG214 coax. | 0 | |||
| PE3W10835 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. Blue FAKRA Jack to FAKRA Jack Cable Using RG188 Coax. PE3W10835 is a FAKRA jack to FAKRA jack cable using RG188 coax. This Pasternack FAKRA jack to FAKRA jack cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. Our jack FAKRA to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10835 FAKRA jack to FAKRA jack cable assembly is constructed with RG188 coax. | 0 | |||
| PE3W10880 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Male Cable Using PE-047SR Coax. PE3W10880 is a 2.4mm male to 2.4mm male cable using PE-047SR coax. This Pasternack 2.4mm male to 2.4mm male cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm 2.4mm for connector 2. Our male 2.4mm to male 2.4mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W10880 2.4mm male to 2.4mm male cable assembly is constructed with PE-047SR coax. | 0 | |||
| PE3C10809 | Pasternack Enterprises | 0 | ||||
| PE3C1085 | Pasternack Enterprises | 0 | ||||
| PE3C10854 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMP Female Non-Magnetic Cable Using PE-SR047-NM Coax., Pasternack’s PE3C10854 non-magnetic right angle SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10854 can also be known as a non-magnetic right angle SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to SMP female cable has a maximum VSWR of 1.7:1. This PE3C10854 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10854 can also be used in the other direction and will be an SMP jack to right angle SMP jack cable assembly if the opposite connectivity is required. This non-magnetic SMP right angle jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. | 0 | |||
| PE3C11088 | Pasternack Enterprises | 0 | ||||
 Teledyne HiRel | M38510/34108BFA | Teledyne HiRel | REGISTER, D-TYPE, HEX PARALLEL RoHS : Not Compliant | 0 | ||
| M38510/34108BEA | Teledyne HiRel | REGISTER, D-TYPE, HEX PARALLEL RoHS : Not Compliant | 0 | |||
| LH2108ADBEA | Teledyne HiRel | OP AMP, DUAL Note LTC Die on hold | 0 | |||
| 5962-8766108XA | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 70 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| LM108A/BHA | Teledyne HiRel | OP AMP, GENERAL PURPOSE | 0 | |||
| 5962-8766108YA | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 70 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8984108KA | Teledyne HiRel | CONTACT SALES RoHS : Not Compliant | 0 | |||
| M38510/34108B2A | Teledyne HiRel | REGISTER, D-TYPE, HEX PARALLEL RoHS : Not Compliant | 0 | |||
| LM108A/BCA | Teledyne HiRel | OP AMP, GENERAL PURPOSE | 0 | |||
5962-89841083A | Teledyne HiRel | CONTACT SALES RoHS : Not Compliant | 0 | |||
| 5962-8766108YC | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 70 NS ACCESS TIME | 0 | |||
M38510/10802BCA | Teledyne HiRel | TRANSISTOR ARRAY RoHS : Not Compliant | 0 | |||
| LM108A/BPA | Teledyne HiRel | OP AMP, GENERAL PURPOSE | 0 | |||
M38510/10802BDA | Teledyne HiRel | TRANSISTOR ARRAY RoHS : Not Compliant | 0 | |||
| LM108A/B2A | Teledyne HiRel | OP AMP, GENERAL PURPOSE | 0 | |||
 Vyrian | 61C11-01-08-02 | Grayhill Inc | Rotary Position Encoder, Single, 2 Channels RoHS : Not Compliant | 18,356 | ||
| 310-87-108-01-640101 | PRECI-DIP SSA | Board Connector, 8 Contact(s), 1 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Socket RoHS : Compliant | 10,844 | |||
| 5962-01-089-1817 | Texas Instruments | NAND Gate, TTL, CDFP16 RoHS : Not Compliant | 9,125 | |||
| CY15B108QSN-108BKXI | Infineon Technologies AG | FRAM, 1MX8, Serial, SPI, PBGA24 RoHS : Compliant | 9,006 | |||
| 61082-042602LF | Amphenol Communications Solutions | Board Stacking Connector, 40 Contact(s), 2 Row(s), Female, Straight, 0.032 inch Pitch, Surface Mount Terminal, Locking, Natural Insulator, Receptacle | 8,668 | |||
| 1N4108-1 | Microchip Technology Inc | Zener Diode, 14V V(Z), 5%, 0.5W, Silicon, Unidirectional, DO-35 RoHS : Not Compliant | 8,437 | |||
| 5962-01-085-9246 | Texas Instruments | Standard SRAM, 256X4, 450ns, MOS, PDIP22 | 8,387 | |||
| 1910827 | Phoenix Contact | Modular Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 7,959 | |||
| 1086108 | Phoenix Contact | Rectangular Connector Adapter, 8 Contacts(Side1), 8 Contacts(Side2), Female-Female RoHS : Compliant | 7,278 | |||
| 5531082 | Phoenix Contact | Thermal Magnetic Circuit Breaker, 1 Pole(s), 5A, 250VAC, 80VDC, Din-rail Mount RoHS : Compliant | 6,787 | |||
| EDJ2108BCSE-GN-F | Micron Technology Inc | DDR3 DRAM, 256MX8, 0.225ns, CMOS, PBGA78 RoHS : Compliant | 6,720 | |||
| 1910872 | Phoenix Contact | Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,702 | |||
| 5962-01-085-3486 | Texas Instruments | Shift Register, 8-Bit, TTL, CDIP16 RoHS : Not Compliant | 6,423 | |||
| CY15V108QSN-108BKXI | Infineon Technologies AG | FRAM, 1MX8, Serial, SPI, PBGA24 RoHS : Compliant | 6,370 | |||
5962-9088108Q2X | Texas Instruments | Operational Amplifier, 2 Func, 300uV Offset-Max, BIPolar, CQCC20 | 6,352 | |||
 Wuhan P&S | SISS5108DN-T1-GE3 | Vishay Intertechnologies | N-Channel 100 V (D-S) MOSFET RoHS : Compliant |
| 6,000 | |
| 61082-123402LF | Amphenol FCi | Bergstak: 120 Positions, Dual Row, BTB Vertical Receptacle RoHS : Compliant |
| 1,800 | ||
| 61083-182402LF | Amphenol FCi | 180Pos,Dual Row,0.8mm,BTB Vertical Header RoHS : Compliant |
| 1,100 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand