Electronic Components Datasheet Search
  British  ▼
ALLDATASHEET.CO.UK

X  



1085D2M50-R Distributor
DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

NXP Semiconductors		P3T1085UK-ARD

 NXP Semiconductors P3T1085UK Arduino® Shield Evaluation Board,
RoHS : Compliant
1 : $16.5
23
TJA1085GHN/0Z

 NXP Semiconductors FlexRay active star coupler (4 branches), Reel 13" Q1/T1 in Sulfur Barrier Bag
RoHS : Compliant
100 : $8.92
1 : $10.54
26 : $9.73
897
P3T1085UKZ

 NXP Semiconductors ±0.7 °C Accuracy Temperature Sensor with I3C/I²C Interface in WLCSP6 package, Reel 13" Q1/T1 in Drypack
RoHS : Compliant
100 : $0.49
1 : $0.49
26 : $0.49
11,121

Rochester Electronics		LT1085CT-12#PBF

 Analog Devices Inc IC VOLT REG Adjustable Step-Down Buck 1 OUT 1.24V - 30V 550mA (Switch) 16-SOIC Tube
RoHS : Compliant
10,000 : $6.33
1,000 : $6.72
500 : $7.12
100 : $7.51
25 : $7.91
2
LT1085CT-5#PBF

 Analog Devices Inc IC VOLT REG Fixed 1 REG 5V 3A TO-220-3 Tube
RoHS : Compliant
10,000 : $6.33
1,000 : $6.72
500 : $7.12
100 : $7.51
25 : $7.91
229
LM1085IS-3.3

 Texas Instruments Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSSO3
RoHS : Not Compliant
10,000 : $1.59
1,000 : $1.69
500 : $1.79
100 : $1.89
25 : $1.99
105
LM1085ISX-3.3

 Texas Instruments Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSSO3
RoHS : Not Compliant
10,000 : $1.41
1,000 : $1.5
500 : $1.58
100 : $1.67
25 : $1.76
3,597
LM1085IT-5.0

 Texas Instruments LM1085 3A Fixed / Adjustable Output Linear Regulator
RoHS : Not Compliant
10,000 : $1.38
1,000 : $1.46
500 : $1.55
100 : $1.63
25 : $1.72
125
LT1085CT

 Linear Technology Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSFM3
RoHS : Not Compliant
10,000 : $5.74
1,000 : $6.09
500 : $6.45
100 : $6.81
25 : $7.17
6
LT1085CT-5#PBF

 Linear Technology IC VOLT REG Fixed 1 REG 5V 3A TO-220-3 Tube
RoHS : Compliant
10,000 : $6.33
1,000 : $6.72
500 : $7.12
100 : $7.51
25 : $7.91
43
LM1085IS-12

 National Semiconductor Corporation Fixed Positive LDO Regulator, 12V, 1.5V Dropout, BIPolar, PSSO3
RoHS : Not Compliant
100,000 : $0.837
10,000 : $0.999
1,000 : $1.12
500 : $1.22
100 : $1.35
1,670
LM1085IS-12/NOPB

 National Semiconductor Corporation IC VOLT REG Fixed 1 REG 12V 3A TO-263-4 Tube
RoHS : Compliant
100,000 : $0.9362
10,000 : $1.12
1,000 : $1.25
500 : $1.36
100 : $1.51
214
LM1085IS-3.3

 National Semiconductor Corporation Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSSO3
RoHS : Not Compliant
10,000 : $1.59
1,000 : $1.69
500 : $1.79
100 : $1.89
25 : $1.99
32
LM1085ISX-12/NOPB

 National Semiconductor Corporation Fixed Positive LDO Regulator, 12V, 1.5V Dropout, BIPolar, PSSO3
RoHS : Compliant
100,000 : $0.5174
10,000 : $0.6175
1,000 : $0.6926
500 : $0.7511
100 : $0.8345
3
LM1085ISX-3.3

 National Semiconductor Corporation Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSSO3
RoHS : Not Compliant
10,000 : $1.41
1,000 : $1.5
500 : $1.58
100 : $1.67
25 : $1.76
2,195
LM1085ISX-ADJ

 National Semiconductor Corporation Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSSO3
RoHS : Not Compliant
10,000 : $1.44
1,000 : $1.53
500 : $1.62
100 : $1.71
25 : $1.8
1
LM1085IT-12/NOPB

 National Semiconductor Corporation IC VOLT REG Fixed 1 REG 12V 3A TO-220-3 Tube
RoHS : Compliant
100,000 : $0.9176
10,000 : $1.1
1,000 : $1.23
500 : $1.33
100 : $1.48
118
LM1085IT-5.0

 National Semiconductor Corporation LM1085 3A Fixed / Adjustable Output Linear Regulator
RoHS : Not Compliant
10,000 : $1.38
1,000 : $1.46
500 : $1.55
100 : $1.63
25 : $1.72
137

Ameya Holding Limited		LM1085IS-5.0/NOPB

 Texas Instruments TO-263//3A POSITIVE LOW DROPOUT REG
RoHS : Compliant
1,305
LM1085IT-ADJ/NOPB

 Texas Instruments TO-220//3A POSITIVE LOW DROPOUT REG
RoHS : Compliant
1,050
LM1085ISX-5.0/NOPB

 Texas Instruments IC REG LDO 5V 3A DDPAK
RoHS : Compliant
1,000
LM1085IS-12/NOPB

 Texas Instruments LM1085IS-12/NOPB , LDO 电压调节器, 3A, 12 V输出, 2.6 → 18 V输入, 3针 TO-263封装
RoHS : Compliant
1,000

GLYN GmbH & Co. KG		ES51085FLW

 Emerging Display Technolgies LCD 128 x 64, FSTN positive, white LED Sitronix S
17

NexGen Digital		LT1085CT-3.3

 Linear Technology
RoHS : Not Compliant
15

Braemac Americas-Symmetry		WH-PS710-850

 Nipron Co Peripheral cable
1 : $35.71
1
CAB.01085

 Taoglas Antenna Solutions IPEX MHFI(U.FL) to 200mm 1.37mm Black SMA(F)BKST
1 : $3.34
0
WH-PP610-850

 Nipron Co
RoHS : Compliant
1 : $18.57
0

DB Roberts		E3-1011-085

 Southco The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic
0
E5-1-085-120

 Southco These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit
0
OPT2-610-8.5BS

 SHEREX FASTENING SO
0
E5-1-085-080

 Southco These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit
0
E5-1-085-161

 Southco These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit
0
E5-1-085-061

 Southco These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit
0
10858

 Heyco HSSRS8-05 NATURAL
0
E5-1-085-190

 Southco These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit
0
E3-121-085

 Southco
0
10859

 Heyco HSSRS8-06 NATURAL
0
110857

 Essentra Components
0
E5-1-085-031

 Southco These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit
0
10853

 Heyco HCPS-20 NATURAL
0
E5-1-085-181

 Southco These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit
0
E5-1-085-011

 Southco These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit
0

Flip Electronics		NCP81085MTTXG

 onsemi Stock, Ship Today
RoHS : Compliant
4,000
SI1085-A-GMR

 Silicon Laboratories Inc Stock, Ship Today
1,568

Maritex		LM1085IT-ADJ/NOPB

 Texas Instruments LDO Regulators; LM1085IT-ADJ/NOPB; TEXAS INSTRUMENTS; 3; 1; 3 A
RoHS : Compliant
1,000 : $1.688
500 : $1.914
100 : $2.217
50 : $2.953
10 : $3.942
1 : $6.079
25,714
UZ1085L-33-TN3-R

 Unisonic Technologies Co Ltd LDO Regulators; UZ1085L-33-TN3-R; UTC
RoHS : Compliant
5,000 : $0.111
2,500 : $0.12
500 : $0.154
150 : $0.187
50 : $0.216
5 : $0.289
1 : $0.899
3,158
LM1085ISX-ADJ/NOPB

 Texas Instruments LDO Regulators; LM1085ISX-ADJ/NOPB; TEXAS INSTRUMENTS; 3; 1; 3 A; 15 V
RoHS : Compliant
1,000 : $0.815
500 : $0.865
100 : $0.983
30 : $1.152
10 : $1.336
1 : $1.717
2,728
TPS61085PWR

 Texas Instruments DC DC Converters; TPS61085PWR; TEXAS INSTRUMENTS; 8; Boost; 1.2 mm; 1
RoHS : Compliant
1,000 : $0.76
500 : $0.831
100 : $0.933
30 : $0.991
10 : $1.302
1 : $1.496
1,474
ADM1085AKSZ-REEL7

 Analog Devices Inc Power Management ICs (PMICs); ADM1085AKSZ-REEL7; ANALOG DEVICES; 6; Surface Mount; SC; 1.1 mm
RoHS : Compliant
300 : $0.702
100 : $0.812
30 : $0.994
10 : $1.194
1 : $1.622
1,195
LD1085D2T33R

 STMicroelectronics LDO Regulators; LD1085D2T33R; STMICROELECTRONICS; 3 A; Fixed; 1; 3.3 V
RoHS : Compliant
1,000 : $0.61
500 : $0.663
100 : $0.797
30 : $0.962
10 : $1.136
1 : $1.525
1,028
TPS61085TPWR

 Texas Instruments DC DC Converters; TPS61085TPWR; TEXAS INSTRUMENTS; 8; Boost; 1.2 mm; 1
RoHS : Compliant
1,000 : $0.739
500 : $0.812
100 : $0.91
30 : $0.968
10 : $1.27
1 : $1.459
530
LM1085R-3.3V

 HTC Korea Voltage Regulator; linear, LDO; fixed; Vout: 3.3V; Vin: 12V; Vd: 1.5V; 3A; -10+70 deg.C; SMD; TO263(D2PAK)
800 : $0.337
100 : $0.363
25 : $0.389
10 : $0.405
1 : $0.426
347
TPS61085DGKR

 Texas Instruments DC DC Converters; TPS61085DGKR; TEXAS INSTRUMENTS; 8; Boost; 0 m; 1
RoHS : Compliant
2,500 : $0.384
1 : $0.61
212
FP11085_LISA2-RS-CLIP

 LEDIL Lens for LED high power; angle: 9 to 26 degrees FWHM; Number of LEDs: 1; Dimensions: round 10mm; Height: 6.8mm; meterial: PMMA; PC; Fastening: glue; clips
5,000 : $1.436
1,000 : $1.507
500 : $1.638
100 : $1.867
10 : $2.388
1 : $3.25
25

Pasternack Enterprises US		PE51085

 Pasternack Enterprises Key Specifications, Antenna Type: Portable, Polarization: Vertical, Minimum Frequency: 3.4 GHz, Maximum Frequency: 3.8 GHz, Connector 1 Polarity: Reverse Polarity, Connector Series: SMA, Connector Gender: Male, Impedance: 50 Ohm, Nominal Gain: 5 dB, Maximum Input VSWR: 2:1. 5 dBi Rubber Duck Portable Antenna 3,400-3,800 MHz Reverse Polarity SMA Male Connector. Rubber duck portable antenna PE51085 from Pasternack (also known as a rubber duck antenna) is part of our extensive in-stock omni-directional radio antenna selection. This single band rubber duck portable antenna has a frequency range of 3.4 GHz to 3.8 GHz and a 5 nominal dBi gain. Our portable rubber duck antenna uses reverse polarity SMA male connector and is rated for 0 Watts input. PE51085 rubber duck portable radio antenna is one of over 40,000 RF, microwave and millimeter wave components supplied from Pasternack. Our portable rubber duck aerial can be bought and shipped worldwide the same-day as with our other available RF parts.
1 : $31.79
25 : $30.2
50 : $28.61
100 : $27.34
31
PE3C10855-12

 Pasternack Enterprises Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: BZ4, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Female Bulkhead to BNC Female Bulkhead Non-Magnetic Cable 12 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10855-12 non-magnetic BNC female bulkhead to BNC female bulkhead RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3C10855-12 can also be known as a non-magnetic BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10855-12 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. This PE3C10855-12 BNC jack to BNC jack cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a BZ4 body with copper-tin-zinc alloy plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC non-magnetic RF cable assembly as per your requirements.
1 : $425.01
25 : $403.76
50 : $382.51
100 : $365.51
1
PE3C1085

 Pasternack Enterprises
0
PE3C10854

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMP Female Non-Magnetic Cable Using PE-SR047-NM Coax., Pasternack’s PE3C10854 non-magnetic right angle SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10854 can also be known as a non-magnetic right angle SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to SMP female cable has a maximum VSWR of 1.7:1. This PE3C10854 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10854 can also be used in the other direction and will be an SMP jack to right angle SMP jack cable assembly if the opposite connectivity is required. This non-magnetic SMP right angle jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements.
0
PEWCT1085

 Pasternack Enterprises
1 : $2,850.0
5 : $2,736.0
10 : $2,622.0
0
PE3W10851

 Pasternack Enterprises
0
PE3W11085

 Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm.
0
PE3C10854-18

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female Right Angle to SMP Female Non-Magnetic Cable 18 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10854-18 non-magnetic right angle SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10854-18 can also be known as a non-magnetic right angle SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to SMP female cable has a maximum VSWR of 1.7:1. This PE3C10854-18 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 18-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10854-18 can also be used in the other direction and will be an SMP jack to right angle SMP jack cable assembly if the opposite connectivity is required. This non-magnetic SMP right angle jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements.
1 : $148.11
25 : $140.7
50 : $133.3
100 : $127.37
0
PE3W01085

 Pasternack Enterprises Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. 1.85mm Male to 1.0/2.3 Jack Bulkhead Cable Using PE-SR405AL Coax. PE3W01085 is a 1.85mm male to 1.0/2.3 jack bulkhead cable using PE-SR405AL coax. This Pasternack 1.85mm male to 1.0/2.3 jack bulkhead cable assembly uses a 50 Ohm 1.85mm for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. Our male 1.85mm to jack 1.0/2.3 bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W01085 1.85mm male to 1.0/2.3 jack bulkhead cable assembly is constructed with PE-SR405AL coax.
0
PE3W01085LF/HS

 Pasternack Enterprises Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. 1.0/2.3 Jack Bulkhead to 1.85mm Male Cable Using PE-SR405AL Coax with HeatShrink, LF Solder. PE3W01085LF/HS is a 1.0/2.3 jack bulkhead to 1.85mm male cable using PE-SR405AL coax. This Pasternack 1.0/2.3 jack bulkhead to 1.85mm male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 1.85mm for connector 2. Our jack 1.0/2.3 bulkhead to male 1.85mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W01085LF/HS 1.0/2.3 jack bulkhead to 1.85mm male cable assembly is constructed with PE-SR405AL coax.
0
PE3C10853-18

 Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to SMP Female Right Angle Non-Magnetic Cable 18 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10853-18 non-magnetic 2.92mm male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a 2.92mm cable connection on one end and a right angle SMP cable connection on the other. Our 2.92mm to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10853-18 can also be known as a non-magnetic 2.92mm plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our 2.92mm male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10853-18 2.92mm plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 18-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10853-18 can also be used in the other direction and will be a right angle SMP jack to 2.92mm plug cable assembly if the opposite connectivity is required. This non-magnetic 2.92mm plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMP cable assembly for quick shipment worldwide. Variations of 2.92mm and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to SMP non-magnetic RF cable assembly as per your requirements.
1 : $136.11
25 : $129.3
50 : $122.5
100 : $117.05
0
PE3C10854-6

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMP Female Right Angle to SMP Female Non-Magnetic Cable 6 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10854-6 non-magnetic right angle SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10854-6 can also be known as a non-magnetic right angle SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to SMP female cable has a maximum VSWR of 1.7:1. This PE3C10854-6 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10854-6 can also be used in the other direction and will be an SMP jack to right angle SMP jack cable assembly if the opposite connectivity is required. This non-magnetic SMP right angle jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements.
1 : $132.72
25 : $126.08
50 : $119.45
100 : $114.14
0
PE3W10855/HS

 Pasternack Enterprises Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Male to SMC Jack Cable Using RG316 Coax with HeatShrink. PE3W10855/HS is a BNC male to SMC jack cable using RG316 coax. This Pasternack BNC male to SMC jack cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMC for connector 2. Our male BNC to jack SMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10855/HS BNC male to SMC jack cable assembly is constructed with RG316 coax.
0
PE3W10855

 Pasternack Enterprises Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Male to SMC Jack Cable Using RG316 Coax. PE3W10855 is a BNC male to SMC jack cable using RG316 coax. This Pasternack BNC male to SMC jack cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMC for connector 2. Our male BNC to jack SMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10855 BNC male to SMC jack cable assembly is constructed with RG316 coax.
0
PE3C10852-9

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMA Male to SMP Female Right Angle Non-Magnetic Cable 9 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10852-9 non-magnetic SMA male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and a right angle SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10852-9 can also be known as a non-magnetic SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10852-9 SMA plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 9-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10852-9 can also be used in the other direction and will be a right angle SMP jack to SMA plug cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements.
1 : $119.57
25 : $113.59
50 : $107.61
100 : $102.83
0

TE Connectivity		1-66108-5

 TE Connectivity III+ SKT,26-24,TIN,STRIP Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 26 – 24 AWG Wire Size: .12 – .2 mm² Tin (Sn) Socket 26 – 24 AWG | Connector Contact | Part Number: 1-66108-5 | Internal Number: 1-66108-5 | TE Connectivity
RoHS : Compliant
10,000 : $0.98
5,000 : $1.0
2,500 : $1.02
1,000 : $1.05
500 : $1.07
250 : $1.09
100 : $1.11
50 : $1.13
25 : $1.15
10 : $1.18
1 : $1.2
8,000
61085-1

 TE Connectivity .156 MNL SOK PTPBR Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 20 – 14 AWG Operating Voltage: 600 VAC Tin (Sn) Socket 20 – 14 AWG | Connector Contact | Part Number: 61085-1 | Internal Number: 61085-1 | TE Connectivity
RoHS : Compliant
1,000 : $0.36
100 : $0.48
10 : $0.59
1 : $0.74
5,449
141085-2

 TE Connectivity TERMINAL TAB FASTON PIDG 6,35 Quick Disconnect Terminal Type: Tab Insulation Option: Partially Insulated Wire Size: 11 – 10 AWG Wire Size: 4 – 6 mm² Wire Size: 8226 – 12066 CMA Tab Partially Insulated 11 – 10 AWG 4 – 6 mm² | Quick Disconnect | Part Number: 141085-2 | Internal Number: 141085-2 | Alias Number: 475376-000 | TE Connectivity
RoHS : Compliant
2,500 : $3.32
1,000 : $3.41
500 : $3.5
250 : $3.59
100 : $3.68
50 : $3.77
25 : $3.86
10 : $3.95
1 : $4.04
3,210
2108504-1

 TE Connectivity 2.5 SDL 18P PLUG HSG 2ROW Number of Positions: 18 Connector & Housing Type: Plug Connector Product Type: Housing Mating Retention: With Mating Retention Type: Latching Feature Std Temp Signal Double Lock Plug | 18 Plug Housing With | Part Number: 2108504-1 | Internal Number: 2108504-1 | TE Connectivity
RoHS : Compliant
1,000 : $0.52
100 : $0.7
10 : $0.87
1 : $1.1
2,405
1-2273108-5

 TE Connectivity M8 strght plug to M12 strgt socket AA Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 2 m Cable Assembly Length: 6.5 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 2 m 6.5 ft | M8 Ms - M12 Fs Cable Assy Bl | Part Number: 1-2273108-5 | Internal Number: 1-2273108-5 | TE Connectivity
RoHS : Compliant
25 : $30.05
10 : $32.37
1 : $34.68
88
2273108-5

 TE Connectivity M8 strght plug to M12 strgt socket AA Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 2 m Cable Assembly Length: 6.5 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 2 m 6.5 ft | M8 Ms - M12 Fs Cable Assy Bl | Part Number: 2273108-5 | Internal Number: 2273108-5 | TE Connectivity
RoHS : Compliant
100 : $30.25
50 : $31.69
25 : $33.13
10 : $34.56
1 : $36.01
1

Waytek, Inc.		12110853-L

 Aptiv PLC Metri-Pack 280 Tangless Female Terminal 12-10 Ga Loose Piece
100 : $0.2099
200 : $0.1871
500 : $0.1784
1,000 : $0.1651
7,843

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com