| Electronic Components Datasheet Search |
|
1085D2M90-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 501951-0850 | Molex | Connector: FFC/FPC; data; gold-plated; SMT; 500mA; 50V; PIN: 8; 40mΩ |
| 12,000 | |
| 5410853039334 | Panasonic Electronic Components | Battery: alkaline; AAA; 1.5V; non-rechargeable; 4pcs; BRONZE |
| 283 | ||
| 0934-201-0858 | TE Connectivity | Connector: circular; Automotive |
| 15 | ||
| 1.15.108.551/0000 | RAFI GmbH & Co Kg | Switch: push-button; OFF-ON; IP40; Illumin: LED; Pushbutton: round RoHS : Compliant |
| 4 | ||
| 11108531-00 | TE Connectivity | Converter: pressure |
| 2 | ||
| 108 514 E | RUKO GmbH | Drill: for metal; core; Ø: 14mm; L: 88mm; weldon; 3/4" |
| 0 | ||
| 108 527 F | RUKO GmbH | Drill: for metal; core; Ø: 27mm; L: 88mm; high speed steel; weldon |
| 0 | ||
| 108 531 F | RUKO GmbH | Drill: for metal; core; Ø: 31mm; L: 88mm; high speed steel; weldon |
| 0 | ||
| 108 539 | RUKO GmbH | Drill: for metal; core; Ø: 39mm; L: 88mm; high speed steel; weldon |
| 0 | ||
| 108 543 | RUKO GmbH | Drill: for metal; core; Ø: 43mm; L: 88mm; high speed steel; weldon |
| 0 | ||
| 108 555 E | RUKO GmbH | Drill: for metal; core; Ø: 30mm; L: 88mm; weldon; 3/4" |
| 0 | ||
| 1781085 | Phoenix Contact | Connector: pluggable terminal block; plug; power supply; 12A RoHS : Compliant |
| 0 | ||
| 5SY4108-5 | Siemens | Circuit breaker; 230/400VAC; Inom: 8A; Poles: 1; Charact: A; 10kA RoHS : Compliant |
| 0 | ||
| 008210 85 000 100 | RECA | Screw; M10; M10x85; Head: cheese head; hex key; HEX 8mm; steel; none |
| 0 | ||
| 1010850120 | Weidmüller Interface GmbH & Co. KG | Cable: for sensors; M12; PIN: 4; shielded,straight; plug; IP67 RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | LD1085D2M33R![]() | STMicroelectronics | Fixed LDO Voltage Regulator, 6.3V to 30V, 1.3V drop, 3.3V/3A out, TO-263AA-3 - Tape and Reel (Alt: LD1085D2M33R) RoHS : Compliant |
| 11,000 | |
| 26-48-1085 | Molex | Pin Header, 8 Contacts, 1 Row, 3.96mm, Matte Tin, 5A, Straight, Partially Shrouded, Brass, THT, PET - Bulk (Alt: 0026481085) RoHS : Compliant |
| 10,800 | ||
LD1085D2T-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator, 3V to 30V, 1.3V drop, 1.8V to 28V/3A out, TO-263-3 - Tape and Reel (Alt: LD1085D2T-R) RoHS : Compliant | 2,000 | |||
| ATS-PCBT1085 | Advanced Thermal Solutions Inc | BOARD LEVEL HEAT SINK - Bulk (Alt: ATS-PCBT1085) RoHS : Compliant |
| 1,000 | ||
| ESQ-108-59-S-S | Samtec Inc | - Rail/Tube (Alt: ESQ-108-59-S-S) RoHS : Compliant |
| 0 | ||
| FRCIR06RGG24-9P-F80T108-50 | ITT Interconnect Solutions | - Bulk (Alt: FRCIR06RGG24-9P-F80T108-50) RoHS : Not Compliant |
| 0 | ||
| FTR-108-51-S-S-P | Samtec Inc | - Rail/Tube (Alt: FTR-108-51-S-S-P) RoHS : Compliant |
| 0 | ||
| 510856-9 | TE Connectivity | - Bulk (Alt: 510856-9) RoHS : Not Compliant |
| 0 | ||
| 11108524-00 | TE Connectivity | - Bag (Alt: 11108524-00) RoHS : Not Compliant |
| 0 | ||
| 93601-0859 | Molex | Single Lever Hood, 93601 Series, Die-cast Aluminium, Gray, Heavy Duty Connectors - Bulk (Alt: 0936010859) RoHS : Compliant |
| 0 | ||
| 97-3102A-36(621)(0850) | Amphenol Corporation | - Bulk RoHS : Not Compliant | 0 | |||
| MKP385E31085KF02W0 | Vishay Intertechnologies | Power Film Capacitor, Metallized PP, Radial Box - 2 Pin, 0.01 uF, ? 10%, Through Hole, 300 V, 850 V - Tape and Reel (Alt: MKP385E31085KF02W0) RoHS : Not Compliant |
| 0 | ||
| MKP385E41085KFP2B0 | Vishay Intertechnologies | Power Film Capacitor, Metallized PP, Radial Box - 2 Pin, 0.1 uF, ? 10%, Through Hole, 300 V, 850 V - Bulk (Alt: MKP385E41085KFP2B0) RoHS : Not Compliant |
| 0 | ||
| VC121085S151DP | Kyocera AVX Components | - Tape and Reel (Alt: VC121085S151DP) RoHS : Compliant |
| 0 | ||
| VCAS121085S151DZ | Kyocera AVX Components | TRANSGUARD - Tape and Reel (Alt: VCAS121085S151DZ) RoHS : Compliant | 0 | |||
![]() Newark | FMC2121085-24 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 24", 610Mm, Fm-F086; |Fairview Microwave FMC2121085-24 RoHS : Not Compliant |
| 1,710 | |
| FMC2121085LF-48 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 4 Ft, 1.21M; |Fairview Microwave FMC2121085LF-48 RoHS : Not Compliant |
| 904 | ||
| DW-04-14-G-D-1085 | Samtec Inc | Conn Stack Brd, 2.54Mm, 8Pos, Hdr; |Samtec, Inc. DW-04-14-G-D-1085 RoHS : Compliant |
| 287 | ||
| MTMS-108-51-G-S-055 | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 8Pos; |Samtec, Inc. MTMS-108-51-G-S-055 RoHS : Compliant |
| 187 | ||
| MTMS-108-51-S-S-190 | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 8Pos; |Samtec, Inc. MTMS-108-51-S-S-190 RoHS : Compliant |
| 187 | ||
| MTMS-108-51-S-S-125 | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 8Pos; |Samtec, Inc. MTMS-108-51-S-S-125 RoHS : Compliant |
| 175 | ||
| TMS-108-52-G-D | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 16Pos; |Samtec, Inc. TMS-108-52-G-D RoHS : Compliant |
| 173 | ||
| 1085 | Weller Hand Tools GmbH | Baffle Kit; |Weller (Apex Tool Group) 1085 RoHS : Not Compliant |
| 144 | ||
| FMC0421085-36 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 36", 914.4Mm; |Fairview Microwave FMC0421085-36 RoHS : Not Compliant |
| 131 | ||
| ZSS-105-07-G-D-1085 | Samtec Inc | Stacking Board Connector; |Samtec, Inc. ZSS-105-07-G-D-1085 RoHS : Compliant |
| 126 | ||
| DW-20-14-L-D-1085 | Samtec Inc | Conn Stack Brd, 2.54Mm, 40Pos, Hdr; |Samtec, Inc. DW-20-14-L-D-1085 RoHS : Compliant |
| 84 | ||
| ESQ-108-59-S-S | Samtec Inc | Connector, Rcpt, 8Pos, 1Row, 2.54Mm; |Samtec, Inc. ESQ-108-59-S-S RoHS : Compliant |
| 49 | ||
| 61085-1 | TE Connectivity | Contact, 14Awg, Socket, Crimp; |Te Connectivity Amp 61085-1 RoHS : Compliant |
| 45 | ||
| 1085 | Pelican Products Inc | 1085 Hardback Case; |Pelican Products 1085 RoHS : Not Compliant |
| 0 | ||
| 1085 | Adafruit Industries | Ads1115 16-Bit Adc - 4 Channel With Programmable Gain Amplifier - Stemma Qt/Qwiic Rohs Compliant: Yes |Adafruit 1085 RoHS : Compliant |
| 0 | ||
![]() Analog Devices Inc | DS1085LZ-25+ | Analog Devices Inc | 3.3V EconOscillator Frequency RoHS : Compliant |
| 5,902 | |
| LT1085CM-3.6#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 2,410 | ||
| DS1085Z-25+ | Analog Devices Inc | EconOscillator Frequency Synth RoHS : Compliant |
| 2,183 | ||
| LT1085CT-3.6#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 1,450 | ||
| LT1085IM-3.6#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 1,350 | ||
| LT1085CT#PBF | Analog Devices Inc | 7.5A, 5A, 3A L Drop Pos Adj Re RoHS : Compliant |
| 918 | ||
| LT1085CM-3.3#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 90 | ||
| LT1085CM#TRPBF | Analog Devices Inc | 7.5A, 5A, 3A L Drop Pos Adj Re RoHS : Compliant |
| 71 | ||
| LT1085CT-3.3#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 55 | ||
| DC1085A | Analog Devices Inc | LTC3559EUD Demo Board- Linear |
| 38 | ||
| LT1085CM-3.3#TRPBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 27 | ||
| 108537-HMC517LC4 | Analog Devices Inc | HMC517LC4 Evaluation PCB |
| 25 | ||
| 108537-HMC499LC4 | Analog Devices Inc | HMC499LC4 Evaluation PCB |
| 22 | ||
| 108537-HMC498LC4 | Analog Devices Inc | HMC498LC4 Evaluation PCB |
| 19 | ||
| LT1085CM-3.6#TRPBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 0 | ||
![]() RS | 97-3102A-22(621)(0850) | Amphenol Industrial Operations | BOX RECEPTACLE SOLID BACKSHELL 22 -55 C +125, MIL-5015 TYPE, 97 SERIES |
| 171 | |
| 97-3101A-18(621)(0850) | Amphenol Industrial Operations | CABLE RECEPTACLE SHELL, METAL SZ 18, BLACK, MIL-5015 TYPE 97 SERIES |
| 102 | ||
| 1710859 | RS Pro | PANEL MOUNT CONTINUOUS INTERNAL PIEZO BUZZER 90DB 16V 4.2KHZ 33 X 23 X 17MM |
| 50 | ||
| 97-3106A-16(621)(0850) | Amphenol Industrial Operations | PLUG CONNECTOR, STRAIGHT, SOLID BACKSHELL 16 -55C, MIL-5015 TYPE, 97 SERIES |
| 41 | ||
| 1710856 | RS Pro | ELECTROMAGNETIC BUZZER 18VDC 100DB SOUND LEVEL CONTINUOUS TONE INTERNAL DRIVE |
| 30 | ||
| RLY3-EMSS100 (1085345) | SICK AG | SAFETY RELAY, OSSD CODED SIGNALS, 24 VDC, RLY3 SERIES |
| 13 | ||
| RLY3-OSSD200 (1085344) | SICK AG | SAFETY RELAY, OSSD CODED SIGNALS, 24 VDC, RLY3 SERIES |
| 9 | ||
| 1085171 (FL SWITCH 1105N-2SFP) | Phoenix Contact | UNMANAGED SWITCH 5 X RJ45 AND 2 X SFP PORTS, 10/100/1000 MBPS |
| 7 | ||
| 56108 (56108-5) | Klein Tools Inc | POLY PULL LINE WITH ORANGE TRACER 500-FEET |
| 3 | ||
| R021M10851 | Bosch Rexroth | LINEAR GUIDE BALL RAIL SZ 15, LENGTH = 400MM, N ACCURACY, TOP MOUNT, R160510431 |
| 1 | ||
| AR1085CHFSC (8561659) | FIBOX | PC ENCLOSURE, 8" WIDE X 5" DEEP X 10" HIGH, HINGED OPAQUE FLAT SCREW COVER |
| 1 | ||
| 97-3102A-36(621)(0850) | Amphenol Industrial Operations | BOX RECEPTACLE SOLID BACKSHELL, 36 -55C, +125MIL-5015 TYPE, 97 SERIES |
| 1 | ||
| 2451085 (25531504) (MPOI-1200750-100RS) | RS Pro | SCREW, #12-24 X 3/4 PHILLIPS OVAL MACHINE, ZINC PLATED |
| 1 | ||
| 1085 | Adafruit Industries | ADS1115 16-BIT ADC - 4 CHANNEL WITH PROGRAMMABLE GAIN AMPLIFIER |
| 0 | ||
| 1085 | Apex Tool Group LLC | WELLER, 3-PIECE BAFFLE KIT FOR THE 6970, 1095 HEAT GUNS |
| 0 | ||
![]() STMicroelectronics | LD1085D2M33R![]() | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 9,814 | |
LD1085D2M-R![]() | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 6,710 | ||
LD1085V50![]() | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 6,543 | ||
LD1085D2T33R![]() | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 5,478 | ||
LD1085V![]() | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 2,201 | ||
LD1085D2M18R![]() | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 1,660 | ||
LD1085D2T-R![]() | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 614 | ||
LD1085P![]() | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 15 | ||
| STA1085EOATR | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
| STA1085EUA3 | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
| STA1085POA | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
| STA1085POA3TR | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
| STA1085EOA | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
![]() Microchip Technology Inc | GC1610-85 | Microchip Technology Inc | Si TVAR Hermetic Pill, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | ||
TC1108-5.0VDBTR![]() | Microchip Technology Inc | 300mA LDO, SOT-223, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
| DSC1101CI1-085.2070 | Microchip Technology Inc | MEMS OSC, LVCMOS, 85.207MHz, 50PPM, 2.5-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-09-05 RoHS : Compliant |
| 0 | ||
| DSC1101CI1-085.2070T | Microchip Technology Inc | MEMS OSC, LVCMOS, 85.207MHz, 50PPM, 2.5-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-09-05 RoHS : Compliant |
| 0 | ||
| OX-1740-DEE-1085-10M0000000 | Microchip Technology Inc | OX-1740-DEE-1085-10M0000000, Projected EOL: 2051-08-12 - Contact for Pricing RoHS : Compliant | 0 | |||
| OX-1740-BEE-1085-10M0000000 | Microchip Technology Inc | OX-1740-BEE-1085-10M0000000, Projected EOL: 2051-03-16 - Contact for Pricing RoHS : Unknown | 0 | |||
| OH-1710-DAE-1085-10M0000000 | Microchip Technology Inc | OH-1710-DAE-1085-10M0000000, Projected EOL: 2051-08-02 - Contact for Pricing | 0 | |||
| OH-2010-DEX-1085-10M0000000 | Microchip Technology Inc | OH-2010-DEX-1085-10M0000000, Projected EOL: 2051-01-21 - Contact for Pricing | 0 | |||
| OH-1730-DAX-1085-10M0000000 | Microchip Technology Inc | OH-1730-DAX-1085-10M0000000, Projected EOL: 2051-05-12 - Contact for Pricing | 0 | |||
| OH-1710-DAX-1085-10M0000000 | Microchip Technology Inc | OH-1710-DAX-1085-10M0000000, Projected EOL: 2051-01-21 - Contact for Pricing | 0 | |||
![]() Bisco Industries | 5710-85-90 | Seastrom Mfg | 580 | |||
| NAS1801-08-5 | Mac Fastteners Inc | 404 | ||||
| 10850-SS-1032-7 | Amatom Electronic Hardware | 300 | ||||
| 1110858 | Unbrako Group | 250 | ||||
| NAS1801-08-5 | Crescent Manufacturing | 205 | ||||
| 10852-B-1032-25 | Amatom Electronic Hardware | 85 | ||||
| 5710-85-60 | Seastrom Mfg | 40 | ||||
| 10856-A-0832-2 | Amatom Electronic Hardware | 25 | ||||
| 10858-SS-1032-0 | Amatom Electronic Hardware | 24 | ||||
| NAS1101-08-5 | NAS MACHINE SCREWS | 10 | ||||
| NAS1801-08-5 | NAS HEX CAP SCREWS | 7 | ||||
| 10853-A-1032-0 | Amatom Electronic Hardware | 2 | ||||
| 211085911 | WASHERS | 2 | ||||
| 1110-85-0519 | Staffall | 1 | ||||
| 17810856 | HEX HEAD CAP SCREWS | 1 | ||||
![]() Rochester Electronics | TDA1085CG![]() | onsemi | Universal Motor Controller RoHS : Compliant |
| 1 | |
| LT1085CT-12#PBF | Analog Devices Inc | IC VOLT REG Fixed 1 REG 12V 3A TO-220-3 Tube RoHS : Compliant |
| 2 | ||
LM1085IS-3.3![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 3.3V 3A TO-263-4 Tube RoHS : Not Compliant |
| 105 | ||
TPS61085DGKT![]() | Texas Instruments | IC VOLT REG Adjustable Step-Up Boost 1 OUT 2.8V - 18.5V 2A (Switch) 8-SOP T/R RoHS : Compliant |
| 25 | ||
TPS61085PW![]() | Texas Instruments | IC VOLT REG Adjustable Step-Up Boost 1 OUT 2.8V - 18.5V 2A (Switch) 8-SOP Tube RoHS : Compliant |
| 43 | ||
LT1085CT![]() | Linear Technology | Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant |
| 6 | ||
DS1085LZ-25+![]() | Maxim Integrated Products | Clock Generator, 66MHz, CMOS, PDSO8 RoHS : Compliant |
| 5,067 | ||
DS1085LZ-25B2+![]() | Maxim Integrated Products | Clock Generator, 66MHz, CMOS, PDSO8 RoHS : Compliant |
| 3,900 | ||
| LM1085IS-12/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 12V 3A TO-263-4 Tube RoHS : Compliant |
| 214 | ||
| LM1085IS-3.3 | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 3.3V 3A TO-263-4 Tube RoHS : Not Compliant |
| 32 | ||
| RAA2108502GLG#AG0 | Renesas Electronics Corporation | DC/DC CONVERTER 1 OUT 600mV to 5V 50A 250W 58-SMD Tray RoHS : Compliant |
| 1,435 | ||
LD1085D2T33R![]() | STMicroelectronics | IC VOLT REG Fixed 1 REG 3.3V 3A TO-263-3 T/R RoHS : Compliant |
| 3,000 | ||
LD1085P![]() | STMicroelectronics | Power Management-LINEAR VOLTAGE RoHS : Compliant |
| 700 | ||
| SP1085V-L | Sipex Corporation | IC VOLT REG Adjustable 1 REG 1.25V 3A TO-220-3 RoHS : Compliant |
| 51,461 | ||
| SP1085V1-L/TR | Sipex Corporation | Adjustable Positive LDO Regulator, 1.5V Dropout RoHS : Compliant |
| 101,750 | ||
![]() Sager | MTMS-108-51-G-S-055 | Samtec Inc | Board to Board & Mezzanine Connectors .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 187 | |
| MTMS-108-51-S-S-125 | Samtec Inc | Board to Board & Mezzanine Connectors .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 175 | ||
| ESQ-108-59-S-S | Samtec Inc | PC / 104 Connectors Elevated Socket Strip, 0.100 Pitch RoHS : Compliant |
| 49 | ||
| 1085 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| FTR-108-51-S-S-P | Samtec Inc | Headers & Wire Housings Surface Mount Micro Header, 0.050 x 0.100 Pitch RoHS : Compliant |
| 0 | ||
| FTR-108-57-L-S-01 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 2-2151085-1 | TE Connectivity | Crimpers / Crimping Tools OC-PA-S-FM-046F 067F-001-0092 | 0 | |||
| 5031085010 | Molex | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 510856-9 | TE Connectivity | Other Tools FUEHRUNGSSCHIENE |
| 0 | ||
| 511-91-085-13-081002 | Mill-Max Mfg Corp | Circuit Board Hardware - PCB STANDRD SOLDER TAIL PGA SOCKET | 0 | |||
| 1731121085 | Molex | D-Sub Contacts FCT TERM HPWR SDR PLG 30 AMP 10-12 AWG | 0 | |||
| 07401085 | Hubbell Incorporated | 90 MALE, DCG, .50-.62, 1 W/MESH |
| 0 | ||
| YS9Z-KIF410856-A | IDEC Corporation | IDEC Corporation | 0 | |||
| 11108524-00 | TE Connectivity | AST4520Y00208H4X1354:CTO-13000000-03 RoHS : Not Compliant |
| 0 | ||
| AL1-X0-11-085-532-D | Carling Technologies | Circuit Breakers | 0 | |||
![]() Ameya Holding Limited | TPS61085TDGKR![]() | Texas Instruments | IC REG BOOST ADJ 2A 8VSSOP RoHS : Compliant | 22,083 | ||
TPS61085TPWR![]() | Texas Instruments | IC REG BOOST ADJ 8TSSOP RoHS : Compliant | 9,288 | |||
LM1085IS-5.0/NOPB![]() | Texas Instruments | RoHS : Compliant | 1,305 | |||
LM1085IT-ADJ/NOPB![]() | Texas Instruments | RoHS : Compliant | 1,050 | |||
LM1085ISX-5.0/NOPB![]() | Texas Instruments | RoHS : Compliant | 1,000 | |||
TPS61085DGKT![]() | Texas Instruments | MSOP 8/I°/18.5V, 2A, 650KHZ, 1.2MHZ STEP-UP DC-DC CONVERTER RoHS : Compliant | 42 | |||
LM1085IT-3.3/NOPB![]() | Texas Instruments | IC: voltage regulator; LDO,fixed; 3.3V; 3A; TO220-3; THT; tube; ±4% RoHS : Compliant | 40 | |||
| DS1085LZ-25+ | Analog Devices Inc | 3.3V EconOscillator Frequency Synthesizer RoHS : Compliant | 21 | |||
| LT1085CT#PBF | Analog Devices Inc | IC: voltage regulator; LDO,adjustable; 1.25÷28.5V; 3A; TO220; THT RoHS : Compliant | 14 | |||
![]() ComSIT USA | 1085880000 | Weidmüller Interface GmbH & Co. KG | AVAILABLE EU RoHS : Compliant | 1,897 | ||
| BI20001085 | IMESA | AVAILABLE EU | 23 | |||
| BI30001085 | AVED ELECTRONICS | AVAILABLE EU | 26 | |||
![]() ComSIT USA | BUK10850DL | NXP Semiconductors | POWERMOS TRANSISTOR LOGIC LEVEL TOPFET Buffer/Inverter Based Peripheral Driver, PSSO2 RoHS : Compliant | 52,295 | ||
| LD1085D2MR | STMicroelectronics | Adjustable Positive LDO Regulator, 1.225V Min, 1.275V Max, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 7,000 | |||
LD1085D2M18R![]() | STMicroelectronics | 3 AMP LOW DROP POSITIVE FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 1.8V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 3,000 | |||
LD1085P![]() | STMicroelectronics | 3 AMP LOW DROP POSITIVE ADJUSTABLE VOLTAGE REGULATOR Adjustable Positive LDO Regulator, 1.225V Min, 1.275V Max, 1.5V Dropout, BIPolar RoHS : Compliant | 2,134 | |||
| LT1085IM36TR | Linear Technology | 3A LOW DROPOUT POSITIVE FIXED REGULATOR Fixed Positive LDO Regulator, 3.6V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 1,118 | |||
LT1085CT![]() | Linear Technology | 3 AMPERE LOW DROPOUT POSITIVE ADJUSTABLE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 1,019 | |||
| LD1085D2M33R | SGS Semiconductor Ltd | 3 AMP LOW DROP POSITIVE FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 1,000 | |||
EZ1085CMTR![]() | Semtech Corporation | 3 AMP POSITIVE VOLTAGE REGULATOR Adjustable Positive LDO Regulator, 1.3V Min, 5.7V Max, 1.35V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 505 | |||
| LD1085V18 | SGS Semiconductor Ltd | 3AMP LOW DROP POSITIVE FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 1.8V, 1.5V Dropout, BIPolar RoHS : Not Compliant | 250 | |||
| LM1085IT33 | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 209 | |||
| 2510108530 | Wieland Electric GmbH | Electronic Component RoHS : Not Compliant | 143 | |||
| LD1085D2T25 | SGS Semiconductor Ltd | 3A LOW DROP POSITIVE FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 2.5V, 1.5V Dropout, BIPolar, PSSO2 RoHS : Not Compliant | 125 | |||
| AZ1085S18EI | Diodes-BCD | Electronic Component RoHS : Compliant | 125 | |||
| LM1085IT12 | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Fixed Positive LDO Regulator, 12V, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 109 | |||
| MRF21085 | Freescale Semiconductor | THE RF MOSFET LINE N-CHANNEL ENHANCEMENT-MODE LATERAL RF POWER MOSFET RF Power Field-Effect Transistor, 1-Element, S Band, Silicon, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 12 | |||
![]() GLYN GmbH & Co. KG | ES51085FLW | Emerging Display Technolgies | LCD 128 x 64, FSTN positive, white LED Sitronix S | 17 | ||
![]() Interstate Connecting Components | 97-3106A-16(621)(0850) | Amphenol Industrial Operations |
| 50 | ||
| 510856-9 | TE Connectivity | FUEHRUNGSSCHIENE |
| 0 | ||
| 42-10850 | Conec Corporation | SAL-8S-RK3-10G2 RoHS : Compliant | 0 | |||
| 108542-000 | TE Connectivity | MWTM-50/16-125/S(S50) RoHS : Compliant | 0 | |||
| 11108524-00 | TE Connectivity | AST4520Y00208H4X1354:CTO-13000 RoHS : Not Compliant | 0 | |||
| 97-3102A-36(621)(0850) | Amphenol Industrial Operations | SHELL |
| 0 | ||
| 11108529-00 | TE Connectivity | AST4530I00005P3X9353:CTO-13000 | 0 | |||
| 10127721-085GLF | Amphenol FCi | 10127721-085GLF-MTK 3.0 08P DR | 0 | |||
| C09131T1141085U | Amphenol Sine Systems | FEMALE RECEPTACLE FLANGE FRONT | 0 | |||
| C146 21R010 854 1 | Amphenol Sine Systems | HOOD METRIC | 0 | |||
| 97-3100A-36(621)(0850) | Amphenol Industrial Operations |
| 0 | |||
| 97-3102A-10SL(621)(085 | Amphenol Industrial Operations | SHELL ASSY | 0 | |||
| 97-3107A-20(621)(0850) | Amphenol Industrial Operations | 5015 QWK DIS PLG#20 |
| 0 | ||
| 710-858NF090909 | Glenair Inc | GTK CONDUIT FITTING | 0 | |||
| 710-858NF281428BT | Glenair Inc | 0 | ||||
![]() NexGen Digital | LT1085CT-3.3![]() | Linear Technology | RoHS : Not Compliant | 15 | ||
![]() PEI Genesis | 4214108-5 | SOURIAU-SUNBANK |
| 0 | ||
| TP1085-5 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| G1085 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| M85049/10-85B | SOURIAU-SUNBANK |
| 0 | |||
| C146-21R010-854-4 | Amphenol Tuchel |
| 0 | |||
| 110855-0008 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| ZP-4108-50L | Amphenol Corporation |
| 0 | |||
| C146-10R010-852-8 | Amphenol Tuchel |
| 0 | |||
| J1085A-12S-1RN | SOURIAU-SUNBANK |
| 0 | |||
| C146-21R010-854-8 | Amphenol Tuchel |
| 0 | |||
| S9-28108-5B | SOURIAU-SUNBANK |
| 0 | |||
| J1085B-12S-1RN | SOURIAU-SUNBANK |
| 0 | |||
| J94-28108-5 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/10-85N | Amphenol PCD |
| 0 | |||
| M85049/10-85N | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | DW-04-14-G-D-1085 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 189 | |
| MTMS-108-51-G-S-055 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 123 | ||
| MTMS-108-51-S-S-190 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 123 | ||
| MTMS-108-51-S-S-125 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 116 | ||
| TMS-108-52-G-D | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 114 | ||
| HTMS-108-52-G-D | Samtec Inc | PCB Header, High-Profile, Through-Hole, RoHS : Compliant |
| 114 | ||
| TMS-108-51-S-D | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 114 | ||
| ZSS-105-07-G-D-1085 | Samtec Inc | .100" Shrouded Elevated Terminal Strip RoHS : Compliant |
| 83 | ||
| ESW-108-59-G-D | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 60 | ||
| DW-20-14-L-D-1085 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 55 | ||
| ESQ-108-59-S-S | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 32 | ||
| 22541085 | HUBER+SUHNER | RF RoHS : Compliant |
| 30 | ||
| 1108539-1 | TE Connectivity | Connectors |
| 9 | ||
| 11108524-00 | TE Connectivity | SENSOR (TE REF 11108524-00) RoHS : Not Compliant |
| 4 | ||
| 71-344108-55S | Amphenol Corporation | MIL-C 26482 SERIES RECEPT CONNECTOR |
| 1 | ||
![]() Richardson RFPD | 22541085 | HUBER+SUHNER | Conn Coaxial 200MHz Solder ST Panel Mount RCP Gold RoHS : Compliant |
| 0 | |
ATS-FPX035035010-85-C1-R0![]() | Advanced Thermal Solutions Inc | Heat Sink Passive Straight Aluminum 6063 23.9C/W B RoHS : Compliant |
| 0 | ||
| LT1085CM-3.6#PBF | Analog Devices Inc | LDO Regulator Pos 3.6V 3A 4-Pin(3+Tab) DDPAK Tube RoHS : Compliant |
| 0 | ||
| 934960108515 | Ampleon | Trans RF MOSFET N-CH 65V 3-Pin TO-270 T/R RoHS : Compliant | 0 | |||
| LT1085CT-3.6#PBF | Analog Devices Inc | LDO Regulator Pos 3.6V 3A 3-Pin(3+Tab) TO-220 Tube RoHS : Compliant |
| 0 | ||
| SI5338A-B01085-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 710MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| 131085-HMC896LP4E | Analog Devices Inc | FILTER - TUNABLE, BAND PASS Development Kit RoHS : Compliant | 0 | |||
| LT1085CM#TRPBF | Analog Devices Inc | LDO Regulator Pos 1.25V to 28.5V 3A 4-Pin(3+Tab) D RoHS : Compliant |
| 0 | ||
| BGY1085A112 | NXP Semiconductors | Push Pull CATV Amplifier 1000MHz Single-Element 7- RoHS : Compliant | 0 | |||
| LT1085IT#PBF | Analog Devices Inc | LDO Regulator Pos 1.25V to 28.5V 3A 3-Pin(3+Tab) T RoHS : Compliant |
| 0 | ||
| 512PCA001085AAG | Skyworks Solutions Inc | Oscillator XO 50MHz/ 200MHz ±30ppm CMOS 52% 2.5V 6 RoHS : Compliant |
| 0 | ||
| 108537-HMC498LC4 | Analog Devices Inc | HMC498LC4 RF Amplifier Evaluation Board RoHS : Compliant |
| 0 | ||
| 05561085-000 | TE Connectivity | CORE.250X3.850LG Size6 40THD, Heat RoHS : Not Compliant |
| 0 | ||
| LT1085CT-3.3#PBF | Analog Devices Inc | LDO Regulator Pos 3.3V 3A 3-Pin(3+Tab) TO-220 Tube RoHS : Compliant |
| 0 | ||
| 935384108598 | NXP Semiconductors | Trans RF MOSFET N-CH 179V 3-Pin NI-360H-2SB | 0 | |||
![]() Chip 1 Exchange | 12110853 | INSTOCK | 14,000 | |||
| LT1085CM | LTECH | INSTOCK | 2,414 | |||
| L1085DG | Niko Semicondutor Co Ltd | INSTOCK | 2,059 | |||
| LT1085CT | INSTOCK | 2,032 | ||||
| LD1085V36 | INSTOCK | 1,200 | ||||
| L6410854 | LSI Corporation | INSTOCK | 1,056 | |||
| 1928301085 | Bosch Sensortec | INSTOCK | 785 | |||
| LT1085CM | INSTOCK | 531 | ||||
| PT12-B1-1-11.10857 | INSTOCK | 500 | ||||
| LD1085D2T33R | Intel Corporation | INSTOCK | 464 | |||
| LT1085CT#PBF | INSTOCK | 300 | ||||
| TEA1085C1 | Philips Semiconductors | INSTOCK | 194 | |||
| TDA1085A | Motorola Semiconductor Products | INSTOCK RoHS : Not Compliant | 190 | |||
| LTA-1085 | INSTOCK | 116 | ||||
| 33108561 | INSTOCK | 28 | ||||
![]() Avnet Abacus | 522071085 | Molex | FFC FPC Board Connector Right Angle 1 mm 10 Contacts Receptacle EasyOn 52207 Surface Mount - Tape and Reel (Alt: 522071085) RoHS : Compliant | 4,000 | ||
| VC121085S151DP | Kyocera AVX Components | TVS Varistor 60 V 85 V 150 V 1210 3225 Metric Multilayer Varistor MLV (Alt: VC121085S151DP) RoHS : Compliant | 4,000 | |||
| 3KYY1108-554 | Grayhill Inc | CAN Keypad custom (Alt: 3KYY1108-554) RoHS : Compliant | 103 | |||
| 1108520 | Phoenix Contact | FMC 15 4ST35 GYAULCBKBD4 FMC154ST35GYAULCBKBD4 (Alt: 1108520) RoHS : Compliant | 0 | |||
| 1085170 | Phoenix Contact | FL SWITCH 1005NT FLSWITCH1005NT (Alt: 1085170) RoHS : Compliant | 0 | |||
| 61085-1 | TE Connectivity | (Alt: 61085-1) RoHS : Compliant | 0 | |||
| 1085838 | Phoenix Contact | MSTBTP 25 4ST35CP14BD31SO MSTBTP254ST35CP14BD31SO (Alt: 1085838) RoHS : Compliant | 0 | |||
| 510856-9 | TE Connectivity | (Alt: 510856-9) RoHS : Not Compliant | 0 | |||
| 1108502-1 | TE Connectivity | Connector Accessories Top Entry Hood Die Cast Aluminum Loose Piece (Alt: 1108502-1) RoHS : Compliant | 0 | |||
| 1108539-1 | TE Connectivity | Connector Accessories Hood Die Cast Aluminum Black (Alt: 1108539-1) RoHS : Compliant | 0 | |||
| 1731121085 | Molex | (Alt: 1731121085) RoHS : Compliant | 0 | |||
| VRM10-85-12-UJ | Advanced Energy Industries Inc | 11126VIN 0837516000V85A 319 X 077 X 124 85EF (Alt: VRM10-85-12-UJ) RoHS : Compliant | 0 | |||
| FTR-108-51-S-S-P | Samtec Inc | (Alt: FTR-108-51-S-S-P) RoHS : Compliant | 0 | |||
| DW-04-14-G-D-1085 | Samtec Inc | Stacking Board Connector DW Series 8 Contacts Header 254 mm Through Hole 2 Rows (Alt: DW-04-14-G-D-1085) RoHS : Compliant | 0 | |||
| ZW-08-14-L-S-1085-108 | Samtec Inc | (Alt: ZW-08-14-L-S-1085-108) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 10127721-085SLF | Amphenol Corporation | (Alt: 10127721-085SLF) RoHS : Compliant |
| 3,375 | |
| BPMI0011085075NK0E | Pulse Electronics Corporation | (Alt: BPMI0011085075NK0E) RoHS : Compliant |
| 1,000 | ||
| 1-2410850-1 | TE Connectivity | RCPT CONN QSFP 112 STACKED, ALI (Alt: 1-2410850-1) RoHS : Compliant | 0 | |||
| 301085589 | Qnity Laird | MEC FOAM LOSSY 9X6X3.17MM (Alt: 301085589) RoHS : Compliant | 0 | |||
| 1-2410850-2 | TE Connectivity | RCPT CONN QSFP 112 STACKED, ALI (Alt: 1-2410850-2) RoHS : Compliant | 0 | |||
| X1E000021085300 | Epson Electronics America Inc | (Alt: X1E000021085300) RoHS : Compliant | 0 | |||
| 10127721-085GRLF | Amphenol Corporation | (Alt: 10127721-085GRLF) RoHS : Compliant | 0 | |||
| 2410850-2 | TE Connectivity | RCPT CONN QSFP 112 STACKED, W/STOPPER (Alt: 2410850-2) RoHS : Compliant | 0 | |||
| 095-900-10852-1 | Amphenol Corporation | (Alt: 095-900-10852-1) RoHS : Compliant |
| 0 | ||
| 0522071085 | Molex | FFC / FPC Board Connector, 10 Contacts, 1 Row, 1mm, Top, Tin-Bismuth Plated, SMT, Right Angle, 0.3mm (Alt: 0522071085) RoHS : Compliant | 0 | |||
| 811085-000 | TE Connectivity | (Alt: 811085-000) RoHS : Compliant | 0 | |||
| VSMA1085250 | Vishay Intertechnologies | HiPow IR Emitting Diode 850nm -e3 (Alt: VSMA1085250) RoHS : Compliant | 0 | |||
| 0417910852 | Molex | Pin Header, 5 Contacts, 1 Row, 3.96mm, Gold, 7A, Straight, Partially Shrouded, Brass, Wire-to-Board (Alt: 0417910852) RoHS : Compliant | 0 | |||
| 2150711085 | Molex | (Alt: 2150711085) RoHS : Compliant | 0 | |||
| 2-1419108-5 | TE Connectivity | (Alt: 2-1419108-5) RoHS : Compliant | 0 | |||
![]() Avnet Silica | LD1085D2M25R![]() | STMicroelectronics | LDO Regulator Pos 25V 3A 4Pin3Tab D2PAKA TR (Alt: LD1085D2M25R) RoHS : Compliant | 274,000 | ||
LD1085D2M18R![]() | STMicroelectronics | Fixed LDO Voltage Regulator 425V to 30V 13V drop 18V3A out TO263AA3 (Alt: LD1085D2M18R) RoHS : Compliant | 105,000 | |||
LD1085D2M-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2M-R) RoHS : Compliant | 76,000 | |||
LD1085D2M33R![]() | STMicroelectronics | Fixed LDO Voltage Regulator 63V to 30V 13V drop 33V3A out TO263AA3 (Alt: LD1085D2M33R) RoHS : Compliant | 76,000 | |||
LD1085D2T-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2T-R) RoHS : Compliant | 58,000 | |||
LD1085D2T33R![]() | STMicroelectronics | LDO Regulator Pos 33V 3A 3Pin2Tab D2PAK TR (Alt: LD1085D2T33R) RoHS : Compliant | 1,000 | |||
| P3T1085UKZ | NXP Semiconductors | Temperature Sensor IC Digital 05C 40 C 125 C WLCSP 6 Pins (Alt: P3T1085UKZ) RoHS : Compliant | 0 | |||
| KMX64-1085 | ROHM Semiconductor | (Alt: KMX64-1085) RoHS : Compliant | 0 | |||
| OM11085,598 | NXP Semiconductors | IAR LPC1114 Series Microcontroller Evaluation Board (Alt: OM11085,598) RoHS : Compliant | 0 | |||
| STA1085EUA3 | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA Tray (Alt: STA1085EUA3) RoHS : Compliant | 0 | |||
| STA1085EOATR | STMicroelectronics | MID INFOTAINMENT (Alt: STA1085EOATR) RoHS : Compliant | 0 | |||
| STA1085EOA3TR | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA TR (Alt: STA1085EOA3TR) RoHS : Compliant | 0 | |||
| TJA1085GHN/0Z | NXP Semiconductors | FlexRay Transceiver 10Mbps 44Pin HVQFN EP TR (Alt: TJA1085GHN/0Z) RoHS : Compliant | 0 | |||
| LG01-0856N1RLTR | Halo Electronics Inc | COMMON MODE CHOKE (Alt: LG01-0856N1RLTR) RoHS : Compliant | 0 | |||
| OX-1740-DEE-1085-10M0000000 | Microchip Technology Inc | (Alt: OX-1740-DEE-1085-10M0000000) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | WH-PS710-850 | Nipron Co | Peripheral cable |
| 1 | |
| WH-PP610-850 | Nipron Co | RoHS : Compliant |
| 0 | ||
| CAB.01085 | Taoglas Antenna Solutions | IPEX MHFI(U.FL) to 200mm 1.37mm Black SMA(F)BKST |
| 0 | ||
![]() Component Electronics, Inc | TMS-108-52-T-S | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 300 | |
| VC121085S151DP | Kyocera AVX Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 250 | ||
| LM1085IS-ADJ | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 235 | ||
LT1085CM-3.3#TRPBF![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 54 | ||
| 10-85-0208 | IN STOCK SHIP TODAY | 50 | ||||
| 07.311.0853.5 | Weiland Electric GmbH | IN STOCK SHIP TODAY |
| 45 | ||
EZ1085CM![]() | Semtech Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 30 | ||
| 0522071085 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 26 | ||
LT1085CM![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant | 21 | |||
| MB100H-10.855275MHZ | MMD | IN STOCK SHIP TODAY | 16 | |||
| LM1085IS-3.3 | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 12 | ||
LT1085CM-3.3#PBF![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
| LM1085IT-ADJ/NOPB | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
ADM1085AKSZ-REEL7![]() | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 8 | ||
| 006-1085057 | NCR Corporation | IN STOCK SHIP TODAY | 7 | |||
![]() DB Roberts | E5-1-085-061 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | ||
| E5-1-085-080 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-085-161 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E3-1011-0859 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E5-1-085-020 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-085-101 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-085-021 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 10859 | Heyco | HSSRS8-06 NATURAL | 0 | |||
| E3-121-085 | Southco | 0 | ||||
| E3-1211-085 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E5-1-085-140 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 10850 | Heyco | HCPS-14 NATURAL | 0 | |||
| FHK2-610-8.5 | SHEREX FASTENING SO | 0 | ||||
| OPT2-610-8.5B | SHEREX FASTENING SO | 0 | ||||
| E5-1-085-051 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
![]() EBV Elektronik | LD1085V![]() | STMicroelectronics | LDO Regulator Pos 125V to 28V 3A 3Pin3Tab TO220 Tube (Alt: LD1085V) RoHS : Compliant | 1,100 | ||
LD1085D2M-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2M-R) RoHS : Compliant | 1,000 | |||
LD1085D2T33R![]() | STMicroelectronics | LDO Regulator Pos 33V 3A 3Pin2Tab D2PAK TR (Alt: LD1085D2T33R) RoHS : Compliant | 1,000 | |||
| VSMA1085600 | Vishay Intertechnologies | (Alt: VSMA1085600) RoHS : Compliant | 600 | |||
| FP11085_LISA2-RS-CLIP | LEDIL | LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11085_LISA2-RS-CLIP) RoHS : Compliant | 100 | |||
| SIM7912G-M2 S2-1085F-Z306Z | SIMCom | MultiBand LTEFDDLTETDDHSPA module (Alt: SIM7912G-M2 S2-1085F-Z306Z) RoHS : Compliant | 2 | |||
| P3T1085UKZ | NXP Semiconductors | Temperature Sensor IC Digital 05C 40 C 125 C WLCSP 6 Pins (Alt: P3T1085UKZ) RoHS : Compliant | 0 | |||
LD1085D2T-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2T-R) RoHS : Compliant | 0 | |||
| VSMA1085250 | Vishay Intertechnologies | (Alt: VSMA1085250) RoHS : Compliant | 0 | |||
| VSMA1085400 | Vishay Intertechnologies | IR Emitter 860nm 1350mWsr 15A 355V 2Pin SMD TR (Alt: VSMA1085400) RoHS : Compliant | 0 | |||
| STA1085EOATR | STMicroelectronics | MID INFOTAINMENT (Alt: STA1085EOATR) RoHS : Compliant | 0 | |||
LD1085D2M18R![]() | STMicroelectronics | Fixed LDO Voltage Regulator 425V to 30V 13V drop 18V3A out TO263AA3 (Alt: LD1085D2M18R) RoHS : Compliant | 0 | |||
LD1085D2M33R![]() | STMicroelectronics | Fixed LDO Voltage Regulator 63V to 30V 13V drop 33V3A out TO263AA3 (Alt: LD1085D2M33R) RoHS : Compliant | 0 | |||
| TJA1085GHN/0Z | NXP Semiconductors | FlexRay Transceiver 10Mbps 44Pin HVQFN EP TR (Alt: TJA1085GHN/0Z) RoHS : Compliant | 0 | |||
| SIM7906E-PCIE S2-1085H | SIMCom | Cellular Module DL CA LTEFDD LTETDD WCDMA 33V to 43V 30mm x 51mm x 43mm (Alt: SIM7906E-PCIE S2-1085H) RoHS : Compliant | 0 | |||
![]() ECCO | 97-3102A-18(621)(0850) | Amphenol Industrial Operations |
| 2,614 | ||
| 97-3102A-22(621)(0850) | Amphenol Industrial Operations |
| 1,685 | |||
| 97-3106A-22(621)(0850) | Amphenol Industrial Operations |
| 546 | |||
| 97-3106A-22(621)(0850) | Amphenol Industrial Operations |
| 546 | |||
| 97-3106A-20(B)(621)(0850) | Amphenol Industrial Operations |
| 128 | |||
| 97-3102A-12S(621)(0850) | Amphenol Industrial Operations |
| 100 | |||
| 97-3102A-12S(621)(0850) | Amphenol Industrial Operations |
| 100 | |||
| 97-3101A-18(621)(0850) | Amphenol Industrial Operations |
| 50 | |||
| 97-3102A-16S(621)(0850) | Amphenol Industrial Operations |
| 49 | |||
| 97-3102A-16S(621)(0850) | Amphenol Industrial Operations |
| 49 | |||
| 97-3102A-18(B)(621)(0850) | Amphenol Industrial Operations |
| 41 | |||
| 97-3108A-16S(621)(0850) | Amphenol Industrial Operations | 25 | ||||
| 97-3108A-28(621)(0850) | Amphenol Industrial Operations | 1 | ||||
| 97-3100A-18(621)(0850) | Amphenol Industrial Operations |
| 1 | |||
| 97-3100A-18(621)(0850) | Amphenol Industrial Operations |
| 1 | |||
![]() FDH Electronics | 512001085 | BJG Electronics | BJG Microwave C | 1,785,834 | ||
| 512851085 | BJG Electronics | BJG Microwave C | 1,785,834 | |||
| 512321085 | W L Gore & Associates | BJG Microwave C | 1,693 | |||
| M23053/5-108-5 | SUMITOMO ELECTRIC Industries Ltd | Harness Mgmt | 630 | |||
| 8001085 | Ellsworth Adhesives | Consumable | 300 | |||
| PS10-851-N | Connector Technology Inc | Circular Conn |
| 256 | ||
| PS10-851-UP | Connector Technology Inc | Connector Acc | 224 | |||
| J1085E-4S-3 | SOURIAU-SUNBANK | Backshells & Ac | 6 | |||
| J599EIE-1085/A10 | SOURIAU-SUNBANK | Connector 38999 |
| 4 | ||
| TF-1085 | Connector Technology Inc | Tooling - Test | 1 | |||
| M85049/10-85N | Amphenol PCD | Backshells & Ac |
| 0 | ||
| 10-494891-085 | Amphenol Aerospace | Connector 38999 |
| 0 | ||
| M85049/10-85W | Amphenol PCD | Backshells & Ac |
| 0 | ||
| 440HS148M2108-5S | Glenair Inc | Backshells & Ac |
| 0 | ||
| 7012-1085 | Amphenol SV Microwave | Cable Assembly RoHS : Compliant |
| 0 | ||
![]() Flip Electronics | NCP81085MTTXG | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,000 | |
| SI1085-A-GMR | Silicon Laboratories Inc | Stock, Ship Today |
| 1,568 | ||
![]() Maritex | LM1085IT-ADJ/NOPB![]() | Texas Instruments | LDO Regulators; LM1085IT-ADJ/NOPB; TEXAS INSTRUMENTS; 3; 1; 3 A RoHS : Compliant |
| 25,564 | |
UZ1085L-33-TN3-R![]() | Unisonic Technologies Co Ltd | LDO Regulators; UZ1085L-33-TN3-R; UTC RoHS : Compliant |
| 2,642 | ||
TPS61085PWR![]() | Texas Instruments | DC DC Converters; TPS61085PWR; TEXAS INSTRUMENTS; 8; Boost; 1.2 mm; 1 RoHS : Compliant |
| 1,001 | ||
ADM1085AKSZ-REEL7![]() | Analog Devices Inc | Power Management ICs (PMICs); ADM1085AKSZ-REEL7; ANALOG DEVICES; 6; Surface Mount; SC; 1.1 mm RoHS : Compliant |
| 839 | ||
TPS61085TPWR![]() | Texas Instruments | DC DC Converters; TPS61085TPWR; TEXAS INSTRUMENTS; 8; Boost; 1.2 mm; 1 RoHS : Compliant |
| 530 | ||
LD1085D2T33R![]() | STMicroelectronics | LDO Regulators; LD1085D2T33R; STMICROELECTRONICS; 3 A; Fixed; 1; 3.3 V RoHS : Compliant |
| 359 | ||
| LM1085R-3.3V | HTC Korea | Voltage Regulator; linear, LDO; fixed; Vout: 3.3V; Vin: 12V; Vd: 1.5V; 3A; -10+70 deg.C; SMD; TO263(D2PAK) |
| 337 | ||
TPS61085DGKR![]() | Texas Instruments | DC DC Converters; TPS61085DGKR; TEXAS INSTRUMENTS; 8; Boost; 0 m; 1 RoHS : Compliant |
| 212 | ||
| FP11085_LISA2-RS-CLIP | LEDIL | Lens for LED high power; angle: 9 to 26 degrees FWHM; Number of LEDs: 1; Dimensions: round 10mm; Height: 6.8mm; meterial: PMMA; PC; Fastening: glue; clips |
| 25 | ||
LM1085ISX-ADJ/NOPB![]() | Texas Instruments | LDO Regulators; LM1085ISX-ADJ/NOPB; TEXAS INSTRUMENTS; 3; 1; 3 A; 15 V RoHS : Compliant |
| 23 | ||
![]() Master Electronics | ESQ-108-59-S-S | Samtec Inc | .100 PC/104™ Elevated Socket Strip RoHS : Compliant |
| 0 | |
| ESW-108-59-L-S-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-291-085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-281-085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-091-085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-181-085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FRCIR06RGG24-9P-F80T108-50 | ITT Interconnect Solutions | FRCIR06RGG24-9P-F80T108-50 RoHS : Compliant |
| 0 | ||
| FTR-108-51-S-S-P | Samtec Inc | .050 X .100 Surface Mount Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| FTR-108-57-L-S-01 | Samtec Inc | Conn Unshrouded HDR 8 POS 1.27mm Solder ST SMD Tube RoHS : Compliant |
| 0 | ||
| 510856-9 | TE Connectivity | FUEHRUNGSSCHIENE RoHS : Not Compliant |
| 0 | ||
| 132041-0850 | ITT Interconnect Solutions | Circular Plastic Push Pull Inline Receptacle Gray 7 Pin 5 A PLC Series | ITT Cannon PLC1G222H07 RoHS : Compliant |
| 0 | ||
| ZPF000000000108591 | TE Connectivity | SRED 210 ZV MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1108539-1 | TE Connectivity | Hood 180ƒA€A° Aluminum Die Cast RoHS : Compliant |
| 0 | ||
| 11108524-00 | TE Connectivity | AST4520Y00208H4X1354:CTO-13000000-03 RoHS : Not Compliant |
| 0 | ||
| S2SDT-20-24-L-10.85-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 1085 | Adafruit Industries | Data Conversion IC Development Tools ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier - STEMMA QT / Qwiic |
| 50 | |
| BPSX 1-08-50 | Bias Power Inc | Switching Power Supply 1W 8V, 5V DUAL, 85-265VACin, Extreme Temp |
| 50 | ||
| 1085485 | Phoenix Contact | Mounting Hardware FL Din-Rail Adapter 22.5 RoHS : Compliant |
| 50 | ||
| WS10850100F130SA | E-Switch Inc | Basic / Snap Action Switches SNAP ACTION, 100mA 125VAC/48VDC, SPDT On-On, Panel Mount Solder RoHS : Compliant |
| 50 | ||
| 1085486 | Phoenix Contact | Mounting Hardware FL Panel Adapter 40 RoHS : Compliant |
| 21 | ||
| 01070-1085 | BEI Sensors | HS35F-62-R14-SS-1024-ABZC-28V/V-SCS12-M18-S Rotary Optical Encoder 3.5" OD |
| 5 | ||
| 601.0853.002 | Altech Corporation | LIMIT SWITCH, REMOTE RESET,SGS-SA2Z W F3 24V, 24V RESET |
| 3 | ||
| 1085170 | Phoenix Contact | Industrial Ethernet Switch, 5 RJ45 ports with 10/100 Mbps on all ports, FL SWITCH 1005NT RoHS : Compliant |
| 0 | ||
| 1085260000 | Weidmüller Interface GmbH & Co. KG | Modular Connectors / Ethernet Connectors IE-BSS-V14M-RJ45-FJ-P RoHS : Compliant |
| 0 | ||
| 1085638 | Phoenix Contact | Specialized Cables EV-T2HPCC-DC500A-5 0M50ECBK11 RoHS : Compliant |
| 0 | ||
| 1085214 | Phoenix Contact | Ethernet Switch, 5 port unmanaged switch, 4 copper 10/100 Mbps, 1 SM FO SC, FL SWITCH 1004N-FX SM RoHS : Compliant |
| 0 | ||
| 1085115 | Phoenix Contact | Unmanaged Ethernet Switch, 16 RJ45 ports with 10/100/1000 Mbps on all ports, FL SWITCH 1116T RoHS : Compliant |
| 0 | ||
| 1085260 | Phoenix Contact | Thermal Transfer Printer, incl. Euro/US power cable and USB cable, THERMOMARK ROLL 2.0 |
| 0 | ||
| 126-1085 | Eaton Corporation | Connector mini hex basic female solder cup termination 5 socket contact |
| 0 | ||
| 1085604 | Phoenix Contact | DC charging cable, EV charg Conn to free end, GB/T Mode 4, 3pwr 6sig, 250/20/2A, 4m, EV-GBG4C-DC250A-4,0M70ESBK01 |
| 0 | ||
![]() Pasternack Enterprises US | PE3C10858-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMP Female Non-Magnetic Cable 18 Inch Length Using PE-SR405-NM Coax., Pasternack’s PE3C10858-18 non-magnetic SMA male to SMP female RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10858-18 can also be known as a non-magnetic SMA plug to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10858-18 SMA plug to SMP jack cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10858-18 can also be used in the other direction and will be an SMP female to SMA male cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. |
| 10 | |
| PE3C10850-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female to SMP Female Non-Magnetic Cable 18 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10850-18 non-magnetic SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10850-18 can also be known as a non-magnetic SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMP female to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10850-18 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 8 | ||
| PE3C10859-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMP Female to SMP Female Non-Magnetic Cable 6 Inch Length Using PE-SR405-NM Coax., Pasternack’s PE3C10859-6 non-magnetic SMP female to SMP female RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10859-6 can also be known as a non-magnetic SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMP female to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10859-6 SMP jack to SMP jack cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 5 | ||
| PE3C10850-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMP Female to SMP Female Non-Magnetic Cable 24 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10850-24 non-magnetic SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10850-24 can also be known as a non-magnetic SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMP female to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10850-24 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 3 | ||
| PE3C10855-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: BZ4, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Female Bulkhead to BNC Female Bulkhead Non-Magnetic Cable 36 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10855-36 non-magnetic BNC female bulkhead to BNC female bulkhead RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3C10855-36 can also be known as a non-magnetic BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10855-36 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. This PE3C10855-36 BNC jack to BNC jack cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a BZ4 body with copper-tin-zinc alloy plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC non-magnetic RF cable assembly as per your requirements. |
| 1 | ||
| PE3W01085LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. 1.85mm Male to 1.0/2.3 Jack Bulkhead Cable Using PE-SR405AL Coax, LF Solder. PE3W01085LF is a 1.85mm male to 1.0/2.3 jack bulkhead cable using PE-SR405AL coax. This Pasternack 1.85mm male to 1.0/2.3 jack bulkhead cable assembly uses a 50 Ohm 1.85mm for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. Our male 1.85mm to jack 1.0/2.3 bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W01085LF 1.85mm male to 1.0/2.3 jack bulkhead cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3W21085 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. Limited Detent SMP Male Bulkhead to SMA Male Cable Using PE-P086HF Coax. PE3W21085 is a SMP male bulkhead to SMA male cable using PE-P086HF coax. This Pasternack SMP male bulkhead to SMA male cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMA for connector 2. Our male SMP bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21085 SMP male bulkhead to SMA male cable assembly is constructed with PE-P086HF coax. | 0 | |||
| PE3C1085 | Pasternack Enterprises | 0 | ||||
| PE3C10854 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMP Female Non-Magnetic Cable Using PE-SR047-NM Coax., Pasternack’s PE3C10854 non-magnetic right angle SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10854 can also be known as a non-magnetic right angle SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to SMP female cable has a maximum VSWR of 1.7:1. This PE3C10854 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10854 can also be used in the other direction and will be an SMP jack to right angle SMP jack cable assembly if the opposite connectivity is required. This non-magnetic SMP right angle jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. | 0 | |||
| PE3C10853 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm. 2.92mm Male to SMP Female Right Angle Non-Magnetic Cable Using PE-SR047-NM Coax., Pasternack’s PE3C10853 non-magnetic 2.92mm male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a 2.92mm cable connection on one end and a right angle SMP cable connection on the other. Our 2.92mm to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10853 can also be known as a non-magnetic 2.92mm plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our 2.92mm male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10853 2.92mm plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10853 can also be used in the other direction and will be a right angle SMP jack to 2.92mm plug cable assembly if the opposite connectivity is required. This non-magnetic 2.92mm plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMP cable assembly for quick shipment worldwide. Variations of 2.92mm and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to SMP non-magnetic RF cable assembly as per your requirements. | 0 | |||
| PE3C10853-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Male to SMP Female Right Angle Non-Magnetic Cable 24 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10853-24 non-magnetic 2.92mm male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a 2.92mm cable connection on one end and a right angle SMP cable connection on the other. Our 2.92mm to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10853-24 can also be known as a non-magnetic 2.92mm plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our 2.92mm male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10853-24 2.92mm plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 24-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10853-24 can also be used in the other direction and will be a right angle SMP jack to 2.92mm plug cable assembly if the opposite connectivity is required. This non-magnetic 2.92mm plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMP cable assembly for quick shipment worldwide. Variations of 2.92mm and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10856-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to SMA Male Non-Magnetic Cable 6 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10856-6 non-magnetic SMA male to SMA male RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10856-6 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10856-6 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10856-6 SMA plug to SMA plug cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10851 | Pasternack Enterprises | 0 | ||||
| PE3W11085 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C10853-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 2.92mm Male to SMP Female Right Angle Non-Magnetic Cable 9 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10853-9 non-magnetic 2.92mm male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a 2.92mm cable connection on one end and a right angle SMP cable connection on the other. Our 2.92mm to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10853-9 can also be known as a non-magnetic 2.92mm plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our 2.92mm male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10853-9 2.92mm plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 9-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10853-9 can also be used in the other direction and will be a right angle SMP jack to 2.92mm plug cable assembly if the opposite connectivity is required. This non-magnetic 2.92mm plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMP cable assembly for quick shipment worldwide. Variations of 2.92mm and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
![]() Relay Specialties | 20110-85 | Deltrol Controls | Power Relay; 240 VAC 3C 3PDT; 10A; Plug-In 11-Pin Round |
| 3 | |
![]() TE Connectivity | 1-66108-5 | TE Connectivity | III+ SKT,26-24,TIN,STRIP Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 26 – 24 AWG Wire Size: .12 – .2 mm² Tin (Sn) Socket 26 – 24 AWG | TE Connectivity RoHS : Compliant |
| 14,670 | |
| 61085-1 | TE Connectivity | .156 MNL SOK PTPBR Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 20 – 14 AWG Operating Voltage: 600 VAC Tin (Sn) Socket 20 – 14 AWG | TE Connectivity RoHS : Compliant |
| 5,324 | ||
| 141085-2 | TE Connectivity | TERMINAL TAB FASTON PIDG 6,35 Quick Disconnect Terminal Type: Tab Insulation Option: Partially Insulated Wire Size: 11 – 10 AWG Wire Size: 4 – 6 mm² Wire Size: 8226 – 12066 CMA Tab Partially Insulated 11 – 10 AWG 4 – 6 mm² | Pidg Spade Tongue Terminal | TE Connectivity RoHS : Compliant |
| 3,155 | ||
| 2108504-1 | TE Connectivity | 2.5 SDL 18P PLUG HSG 2ROW Number of Positions: 18 Connector & Housing Type: Plug Connector Product Type: Housing Mating Retention: With Mating Retention Type: Latching Feature 18 Plug Housing With | TE Connectivity RoHS : Compliant |
| 2,305 | ||
| 1-2273108-5 | TE Connectivity | M8 strght plug to M12 strgt socket AA Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 2 m Cable Assembly Length: 6.5 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 2 m 6.5 ft | TE Connectivity RoHS : Compliant |
| 88 | ||
| 2273108-5 | TE Connectivity | M8 strght plug to M12 strgt socket AA Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 2 m Cable Assembly Length: 6.5 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 2 m 6.5 ft | TE Connectivity RoHS : Compliant |
| 1 | ||
![]() Vyrian | LT1085IM-3.6#TR | Analog Devices Inc | Fixed Positive LDO Regulator, 3.6V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 10,243 | ||
| DS1085LZ-5T | Analog Devices Inc | Clock Generator RoHS : Unknown | 9,903 | |||
| RH1085MK | Analog Devices Inc | Adjustable Positive LDO Regulator, 1.5V Dropout, MBFM2 RoHS : Not Compliant | 9,900 | |||
| DS1085LZ-25+ | Analog Devices Inc | Clock Generator, 66MHz, CMOS, PDSO8 RoHS : Compliant | 9,834 | |||
| LM1085IT-5-0-NOPB | Texas Instruments | 7,725 | ||||
| LT1085IT#TR | Analog Devices Inc | Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 7,302 | |||
| RH1085K#TR | Analog Devices Inc | Regulator, 1 Output, BIPolar RoHS : Not Compliant | 7,089 | |||
| 5962-01-085-1456 | Texas Instruments | NOR Gate, TTL, CDIP14 RoHS : Not Compliant | 5,244 | |||
| STA1085ELA | STMicroelectronics | RoHS : Compliant | 3,218 | |||
LT1085CM-3.3![]() | Linear Technology | Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 894 | |||
LT1085CM-3.6#PBF![]() | Linear Technology | Fixed Positive LDO Regulator, 3.6V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 838 | |||
LT1085CT-3.6![]() | Linear Technology | Fixed Positive LDO Regulator, 3.6V, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 758 | |||
TDA1085CDR2![]() | onsemi | Universal Motor Controller, 0.2A, PDSO16 RoHS : Not Compliant | 715 | |||
LT1085CT-3.6#PBF![]() | Linear Technology | Fixed Positive LDO Regulator, 3.6V, 1.5V Dropout, BIPolar, PSFM3 RoHS : Compliant | 515 | |||
| LT1085CT-3.3 | Analog Devices Inc | Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 195 | |||
![]() Waytek, Inc. | 12110853-L | Aptiv PLC | Metri-Pack 280 Tangless Female Terminal 12-10 Ga Loose Piece |
| 5,893 | |
![]() Win Source Electronics | TPS61085DGKRG4![]() | Texas Instruments | IC REG BOOST ADJ 2A 8VSSOP RoHS : Compliant |
| 163,990 | |
TPS61085DGKR![]() | Texas Instruments | IC REG BOOST ADJ 2A 8VSSOP RoHS : Compliant |
| 100,000 | ||
TPS61085PWR![]() | Texas Instruments | IC REG BOOST ADJ 2A 8TSSOP RoHS : Compliant |
| 32,215 | ||
ADM1085AKSZ-REEL7![]() | Analog Devices Inc | Processor Supervisor 0.6V 1 Active High/Open Drain 6-Pin SC-70 T/R / IC SIMPLE SEQUENCER OD SC70-6 RoHS : Compliant |
| 27,870 | ||
| ADM1085AKS | Analog Devices Inc | Supervisory Circuit 1-Channel SC-70 |
| 15,000 | ||
| ADM1085AKS-PEEL7 | Analog Devices Inc |
| 14,280 | |||
| ASM1085 | Asmedia Technology Inc |
| 9,000 | |||
LM1085IS-3.3![]() | Texas Instruments | IC REG LDO 3.3V 3A DDPAK RoHS : Not Compliant |
| 8,810 | ||
LM1085IT-ADJ/NOPB![]() | Texas Instruments | LM1085 3A Low Dropout Positive Regulators RoHS : Compliant |
| 5,740 | ||
LM1085IS-12/NOPB![]() | Texas Instruments | LM1085 3A Low Dropout Positive Regulators RoHS : Compliant |
| 1,230 | ||
LT1085CM-3.3#TRPBF![]() | Linear Technology | IC REG LDO 3.3V 3A D2PAK RoHS : Compliant |
| 1,027 | ||
LT1085CM-3.3![]() | Linear Technology | 3A, 5A, 7.5A Low Dropout Positive Fixed Regulators RoHS : Not Compliant |
| 620 | ||
LT1085CM-3.3#PBF![]() | Linear Technology | IC REG LDO 3.3V 3A D2PAK RoHS : Compliant |
| 530 | ||
LD1085D2T-R![]() | STMicroelectronics | IC REG LDO ADJ 3A D2PAK RoHS : Compliant |
| 386 | ||
LT1085CT#PBF![]() | Linear Technology | IC REG LDO ADJ 3A TO220-3 RoHS : Compliant |
| 180 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |