 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
1085D2T28-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | 26-48-1085 | Molex | Pin Header, 8 Contacts, 1 Row, 3.96mm, Matte Tin, 5A, Straight, Partially Shrouded, Brass, THT, PET - Bulk (Alt: 0026481085) RoHS : Compliant |
| 12,000 | |
LD1085D2M33R | STMicroelectronics | Fixed LDO Voltage Regulator, 6.3V to 30V, 1.3V drop, 3.3V/3A out, TO-263AA-3 - Tape and Reel (Alt: LD1085D2M33R) RoHS : Compliant |
| 11,000 | ||
| LD1085D2T-R | STMicroelectronics | Adjustable LDO Voltage Regulator, 3V to 30V, 1.3V drop, 1.8V to 28V/3A out, TO-263-3 - Tape and Reel (Alt: LD1085D2T-R) RoHS : Compliant | 2,000 | |||
| 52207-1085 | Molex | FFC / FPC Board Connector, 10 Contacts, 1 Row, 1mm, Top, Tin-Bismuth Plated, SMT, Right Angle, 0.3mm - Tape and Reel (Alt: 0522071085) RoHS : Compliant |
| 1,000 | ||
ATS-PCBT1085 | Advanced Thermal Solutions Inc | BOARD LEVEL HEAT SINK - Bulk (Alt: ATS-PCBT1085) RoHS : Compliant |
| 1,000 | ||
| MTMS-108-51-S-S-155 | Samtec Inc | - Rail/Tube (Alt: MTMS-108-51-S-S-155) RoHS : Compliant |
| 0 | ||
| MTMS-108-53-G-S-010 | Samtec Inc | - Bulk (Alt: MTMS-108-53-G-S-010) RoHS : Compliant | 0 | |||
| MKP385E41085KIM2T0 | Vishay Intertechnologies | Power Film Capacitor, Metallized PP, Radial Box - 2 Pin, 0.1 uF, ? 10%, Through Hole, 300 V, 850 V - Trays (Alt: MKP385E41085KIM2T0) RoHS : Not Compliant |
| 0 | ||
| 97-3101A-24(621)(0850) | Amphenol Corporation | - Bulk (Alt: 97-3101A-24(621)(0850)) RoHS : Not Compliant |
| 0 | ||
| EB1085-02-500 | Amphenol Corporation | - Bulk (Alt: EB1085-02-500) RoHS : Compliant |
| 0 | ||
| EB1085-07-000 | Amphenol Corporation | B32673P6334J289 - Bulk (Alt: EB1085-07-000) RoHS : Compliant |
| 0 | ||
| ESQ-108-58-G-T | Samtec Inc | - Bulk (Alt: ESQ-108-58-G-T) RoHS : Compliant | 0 | |||
| HW-20-12-G-S-661-085 | Samtec Inc | - Bulk (Alt: HW-20-12-G-S-661-085) RoHS : Compliant | 0 | |||
| HTMS-108-56-S-S | Samtec Inc | - Bulk (Alt: HTMS-108-56-S-S) RoHS : Compliant | 0 | |||
| FTR-108-53-G-S-TR | Samtec Inc | - Tape and Reel (Alt: FTR-108-53-G-S-TR) RoHS : Compliant | 0 | |||
 Newark | FMC0221085-72 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 6 Ft, 1.82M; |Fairview Microwave FMC0221085-72 RoHS : Not Compliant |
| 602 | |
| 52207-1085 | Molex | Ffc/Fpc Conn, R/A Rcpt, 10Pos, 1Row; |Molex 52207-1085 (Alternate Part Number: 822348117925 RoHS : Compliant |
| 553 | ||
| 52207-1085 | Molex | Ffc/Fpc Conn, R/A Rcpt, 10Pos, 1Row; |Molex 52207-1085 (Alternate Part Number: 822348117925 RoHS : Compliant |
| 553 | ||
| VSMA1085600 | Vishay Intertechnologies | Ir Emitter, 860Nm, 60 Deg, Smd; |Vishay VSMA1085600 RoHS : Compliant |
| 300 | ||
| 1085 | Weller Hand Tools GmbH | Baffle Kit; |Weller (Apex Tool Group) 1085 RoHS : Not Compliant |
| 144 | ||
| FMC0421085-60 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 5 Ft, 1.52M; |Fairview Microwave FMC0421085-60 RoHS : Not Compliant |
| 131 | ||
| FMC0421085LF-36 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 36", 914.4Mm; |Fairview Microwave FMC0421085LF-36 RoHS : Not Compliant |
| 131 | ||
| FMC0421085/SP1-12 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 12", 305Mm, Fm-F086; |Fairview Microwave FMC0421085/SP1-12 RoHS : Not Compliant |
| 131 | ||
| FMC0421085/SP2-24 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 24", 610Mm, Fm-F086; |Fairview Microwave FMC0421085/SP2-24 RoHS : Not Compliant |
| 131 | ||
| FMC1921085-24 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 24", 610Mm, Fm-F086; |Fairview Microwave FMC1921085-24 RoHS : Not Compliant |
| 5 | ||
| AR1085CHFSC | FIBOX | Plastic Enclosure, Junction Box; |Fibox AR1085CHFSC RoHS : Compliant |
| 4 | ||
| FMCA3108-50CM | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 19.7", 500Mm; |Fairview Microwave FMCA3108-50CM RoHS : Not Compliant |
| 4 | ||
| 1085165 | Phoenix Contact | Ethernet Switch, 8Port, 10/100Mbps; |Phoenix Contact 1085165 RoHS : Compliant |
| 3 | ||
| 1085 | Adafruit Industries | Ads1115 16-Bit Adc - 4 Channel With Programmable Gain Amplifier - Stemma Qt/Qwiic Rohs Compliant: Yes |Adafruit 1085 RoHS : Compliant |
| 0 | ||
| 1085 | Pelican Products Inc | 1085 Hardback Case; |Pelican Products 1085 RoHS : Not Compliant |
| 0 | ||
 Analog Devices Inc | DS1085Z-50+ | Analog Devices Inc | EconOscillator Frequency Synth RoHS : Compliant |
| 6,314 | |
| MAX1085BCSA+ | Analog Devices Inc | 400ksps/300ksps, Single-Supply RoHS : Compliant |
| 5,937 | ||
| MAX1085BESA+ | Analog Devices Inc | 400ksps/300ksps, Single-Supply RoHS : Compliant |
| 3,217 | ||
| LT1085CT-3.6#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 1,450 | ||
| LT1085IM-3.6#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 1,350 | ||
| LT1085IM#PBF | Analog Devices Inc | 7.5A, 5A, 3A L Drop Pos Adj Re RoHS : Compliant |
| 947 | ||
| LT1085IM#TRPBF | Analog Devices Inc | 7.5A, 5A, 3A L Drop Pos Adj Re RoHS : Compliant |
| 163 | ||
| LT1085CM-3.3#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 129 | ||
| LT1085CM#PBF | Analog Devices Inc | 7.5A, 5A, 3A L Drop Pos Adj Re RoHS : Compliant |
| 102 | ||
| LT1085CM#TRPBF | Analog Devices Inc | 7.5A, 5A, 3A L Drop Pos Adj Re RoHS : Compliant |
| 71 | ||
| LT1085CT-3.3#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 55 | ||
| DC1085A | Analog Devices Inc | LTC3559EUD Demo Board- Linear |
| 38 | ||
| 108537-HMC498LC4 | Analog Devices Inc | HMC498LC4 Evaluation PCB |
| 22 | ||
| MAX1085BCSA+T | Analog Devices Inc | 400ksps/300ksps, Single-Supply RoHS : Compliant |
| 0 | ||
| LT1085CM-3.6#TRPBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 0 | ||
 NXP Semiconductors | TJA1085GHN/0Z | NXP Semiconductors | FlexRay active star coupler (4 branches), Reel 13" Q1/T1 in Sulfur Barrier Bag RoHS : Compliant |
| 895 | |
| P3T1085UK-ARD | NXP Semiconductors | P3T1085UK Arduino® Shield Evaluation Board, RoHS : Compliant |
| 5 | ||
| P3T1085UKZ | NXP Semiconductors | ±0.7 °C Accuracy Temperature Sensor with I3C/I²C Interface in WLCSP6 package, Reel 13" Q1/T1 in Drypack RoHS : Compliant |
| 8,043 | ||
 RS | 97-3102A-18(621)(0850) | Amphenol Industrial Operations | BOX RECEPTACLE SOLDER SOLID BACKSHELL 18, 10AMIL-5015 TYPE, 97 SERIES |
| 491 | |
| 97-3106A-22(621)(0850) | Amphenol Industrial Operations | PLUG CONNECTOR, STRAIGHT, SOLID BACKSHELL 22 -55C, MIL-5015 TYPE, 97 SERIES |
| 224 | ||
| 97-3106A-28(621)(0850) | Amphenol Industrial Operations | PLUG CONNECTOR, STRAIGHT, SOLID BACKSHELL 28 -55C, MIL-5015 TYPE, 97 SERIES |
| 50 | ||
| 1085T-N | Edwards Signaling | SWITCH SURFACE TERMINAL, NORMALLY OPEN, 7.5/VA, 100V, WHITE, SENSE RANGE .8 IN |
| 34 | ||
| 1085176 (FL SWITCH 1005N-2SFX) | Phoenix Contact | UNMANAGED SWITCH 5 X RJ45 AND 2 X SFX PORTS, 10/100 MBPS |
| 22 | ||
| 97-3101A-24(621)(0850) | Amphenol Industrial Operations | CABLE RECEPTACLE SHELL, METAL SZ 24, BLACK, MIL-5015 TYPE 97 SERIES |
| 10 | ||
| 23_BNO-0-0-2/133_NE (22541085) | HUBER+SUHNER | RF CONNECTORS / COAXIAL CONNECTORS, STRAIGHT PANEL RECEPTACLE JACK, FLANGE MOUN |
| 10 | ||
| 10-2506.1085 | EAO AG | LED, SINGLE COLOR, BA9,GREEN, LUMI INTENSITY 1050 MCD,7MA,6VDC RoHS : Compliant |
| 5 | ||
| R021M10857 | Bosch Rexroth | LINEAR GUIDE BALL RAIL SZ 15, LENGTH = 760MM, N ACCURACY, TOP MOUNT, R160510431 |
| 2 | ||
| 601.0853.002 | Altech Corporation | LIMIT SWITCH, REMOTE RESET, SGS-SA2Z W F3 24V, 24V RESET |
| 1 | ||
| AR884SC (8561085) | FIBOX | PC ENCLOSURE, 8" WIDE X 4" DEEP X 8" HIGH, OPAQUE SCREW COVER, UL 508 |
| 1 | ||
| ALBP1010 (8592383) | FIBOX | 10 INCH WIDE X 10 INCH HIGH ALUMINIUM PANEL FOR 10 INCH WIDE X 10 INCH HIGH ENCL |
| 1 | ||
| MB 10858 II (3540858) | FIBOX | FIBOX - GRILLE/FILTER HOLDER, FOR MB 10564 II |
| 1 | ||
| 1085 | Apex Tool Group LLC | WELLER, 3-PIECE BAFFLE KIT FOR THE 6970, 1095 HEAT GUNS |
| 0 | ||
| 1085 | Adafruit Industries | ADS1115 16-BIT ADC - 4 CHANNEL WITH PROGRAMMABLE GAIN AMPLIFIER |
| 0 | ||
 STMicroelectronics | LD1085D2M33R | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 10,157 | |
LD1085V50 | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 6,579 | ||
| LD1085D2T33R | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 6,075 | ||
| LD1085D2M-R | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 5,739 | ||
| LD1085D2M18R | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 1,660 | ||
| LD1085D2T-R | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 1,471 | ||
| LD1085V | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 243 | ||
LD1085P | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 15 | ||
| STA1085EOATR | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
| STA1085POA3TR | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
| STA1085EOA | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
| STA1085EUA3 | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
| STA1085POA | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
 Microchip Technology Inc | GC1610-85 | Microchip Technology Inc | Si TVAR Hermetic Pill, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | ||
TC1108-5.0VDBTR | Microchip Technology Inc | 300mA LDO, SOT-223, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
| DSC1101CI1-085.2070 | Microchip Technology Inc | MEMS OSC, LVCMOS, 85.207MHz, 50PPM, 2.5-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-09-05 RoHS : Compliant |
| 0 | ||
| DSC1101CI1-085.2070T | Microchip Technology Inc | MEMS OSC, LVCMOS, 85.207MHz, 50PPM, 2.5-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-09-05 RoHS : Compliant |
| 0 | ||
| OH-1730-DAX-1085-10M0000000 | Microchip Technology Inc | OH-1730-DAX-1085-10M0000000, Projected EOL: 2051-05-12 - Contact for Pricing | 0 | |||
| OX-1740-DEE-1085-10M0000000 | Microchip Technology Inc | OX-1740-DEE-1085-10M0000000, Projected EOL: 2051-08-12 - Contact for Pricing RoHS : Compliant | 0 | |||
| OH-2010-DEX-1085-10M0000000 | Microchip Technology Inc | OH-2010-DEX-1085-10M0000000, Projected EOL: 2051-01-21 - Contact for Pricing | 0 | |||
| OH-1710-DAE-1085-10M0000000 | Microchip Technology Inc | OH-1710-DAE-1085-10M0000000, Projected EOL: 2051-08-02 - Contact for Pricing | 0 | |||
| OX-1740-BEE-1085-10M0000000 | Microchip Technology Inc | OX-1740-BEE-1085-10M0000000, Projected EOL: 2051-03-16 - Contact for Pricing RoHS : Unknown | 0 | |||
| OH-1710-DAX-1085-10M0000000 | Microchip Technology Inc | OH-1710-DAX-1085-10M0000000, Projected EOL: 2051-01-21 - Contact for Pricing | 0 | |||
 Bisco Industries | 5710-85-10 | Seastrom Mfg | 6,300 | |||
| 5710-85-90 | Seastrom Mfg | 580 | ||||
| 110850 | Unbrako Group | 500 | ||||
| 10850-SS-1032-7 | Amatom Electronic Hardware | 300 | ||||
| 10854-1 | MISC. SPACERS/STANDOFFS/HANDLES | 108 | ||||
| M23053/5-108-5 | MIL-SPEC Wire Cable Tubing Sleeve | 52 | ||||
| 10856-A-0832-2 | Amatom Electronic Hardware | 25 | ||||
| 10859-A-1032-0 | Amatom Electronic Hardware | 13 | ||||
| 10854-A-1032-0 | Amatom Electronic Hardware | 12 | ||||
| 10857 | MISC. CHEMICALS | 12 | ||||
| 10855-A-1032-0 | Amatom Electronic Hardware | 4 | ||||
| B6-30-10-85 | Thomas & Betts | 2 | ||||
| LT1085CT | ACTIVE COMPNTS/DIODES | 1 | ||||
| 1110-85-0519 | Staffall | 1 | ||||
| 10859-SS-0832-0 | Amatom Electronic Hardware | 1 | ||||
 Rochester Electronics | NCP81085MTTXG | onsemi | Gate Driver N-Channel MOSFET 2 Driver High-Side and Low-Side 9-SON T/R RoHS : Compliant |
| 8,000 | |
LM1085ISX-3.3 | Texas Instruments | Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant |
| 3,597 | ||
| LM1085IT-5.0 | Texas Instruments | LM1085 3A Fixed / Adjustable Output Linear Regulator RoHS : Not Compliant |
| 125 | ||
| LT1085CT | Linear Technology | Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant |
| 6 | ||
| LT1085IM-3.6#PBF | Linear Technology | IC VOLT REG Fixed 1 REG 3.6V 3A TO-263-4 Tube RoHS : Compliant |
| 22 | ||
| LT1085IT-12 | Linear Technology | Fixed Positive LDO Regulator, 12V, 1.2V Dropout, BIPolar, PSFM3 RoHS : Not Compliant |
| 1,102 | ||
| DS1085LZ-5 | Maxim Integrated Products | Clock Generator, 66MHz, CMOS, PDSO8 RoHS : Not Compliant |
| 38 | ||
DS1085Z-50 | Maxim Integrated Products | 3.3V EconOscillator Frequency Synthesizer RoHS : Not Compliant |
| 63 | ||
| MAX1085BCSA | Maxim Integrated Products | ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Serial Access, BICMOS, PDSO8 RoHS : Not Compliant |
| 9 | ||
| LM1085IS-12/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 12V 3A TO-263-4 Tube RoHS : Compliant |
| 214 | ||
| LM1085ISX-12/NOPB | National Semiconductor Corporation | Fixed Positive LDO Regulator, 12V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant |
| 3 | ||
| LM1085ISX-3.3 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant |
| 2,195 | ||
| LM1085ISX-ADJ | National Semiconductor Corporation | Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant |
| 1 | ||
| LM1085IT-5.0 | National Semiconductor Corporation | LM1085 3A Fixed / Adjustable Output Linear Regulator RoHS : Not Compliant |
| 137 | ||
| RAA2108502GLG#HG0 | Renesas Electronics Corporation | Switching Regulator, 1067kHz Switching Freq-Max, Hybrid, PXMA58 RoHS : Compliant |
| 200 | ||
 Sager | MTMS-108-51-S-S-155 | Samtec Inc | Board to Board & Mezzanine Connectors .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 187 | |
| MTMS-108-51-L-D-180 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 173 | ||
| DW-36-14-L-D-1085 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 50 | ||
| 1085 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9736011085 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9855321085 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| MTMS-108-51-L-D-135 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| MTMS-108-53-G-S-010 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| MTMS-108-54-G-D-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| MTMS-108-55-G-S-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| RF316-01RP1-01RP1-0850 | Samtec Inc | RF Cable Assemblies RoHS : Compliant | 0 | |||
| DW-02-14-F-S-1085 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DW-22-14-F-S-1085 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| ESQ-108-58-G-T | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| HW-20-12-G-S-661-085 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
 TME | 1108534-1 | TE Connectivity | Enclosure for connectors: HDC |
| 55 | |
| 55501085 | Lapp Group | Straight terminal connector; Thread: metric,outside; IP68,IP69 |
| 10 | ||
| 108 516 E | RUKO GmbH | Drill bit; core; Ø: 16mm; L: 88mm; high speed steel cobalt HSS-E |
| 0 | ||
| 108 520 E | RUKO GmbH | Drill bit; core; Ø: 20mm; L: 88mm; high speed steel cobalt HSS-E |
| 0 | ||
| 108 529 F | RUKO GmbH | Drill bit; core; Ø: 29mm; L: 88mm; high speed steel; weldon; 3/4" |
| 0 | ||
| 108 533 F | RUKO GmbH | Drill bit; core; Ø: 33mm; L: 88mm; high speed steel; weldon; 3/4" |
| 0 | ||
| 108 536 | RUKO GmbH | Drill bit; core; Ø: 36mm; L: 88mm; high speed steel; weldon; 3/4" |
| 0 | ||
| 108 540 | RUKO GmbH | Drill bit; core; Ø: 40mm; L: 88mm; high speed steel; weldon; 3/4" |
| 0 | ||
| 108 557 E | RUKO GmbH | Drill bit; core; Ø: 57mm; L: 88mm; high speed steel cobalt HSS-E |
| 0 | ||
| 1085 SL001 | Alpha Wire | Wire; Alpha Essential C&C; 25x16AWG; unshielded; 600V; 305m; Cu |
| 0 | ||
| 1891085 | Phoenix Contact | Connector: PCB terminal block; 4A; 250V; PIN: 4; spring clamp RoHS : Compliant |
| 0 | ||
| 281 085 E | RUKO GmbH | Drill bit; for metal; Ø: 8.5mm; L: 117mm; Working part len: 75mm |
| 0 | ||
| 31-085 | NEO TOOLS | Cutters; for cutting iron, copper or aluminium sheet metal |
| 0 | ||
| 7000-13261-3310850 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; M12 female; angled; 8.5m; plug; 60VDC RoHS : Compliant |
| 0 | ||
| 801085-SF | TE Connectivity | Inductor: common mode; THT; 4A; R: 16mΩ; 21x15mm; 500uH RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | LM1085IS-5.0/NOPB | Texas Instruments | TO-263//3A POSITIVE LOW DROPOUT REG RoHS : Compliant | 1,305 | ||
| LM1085IT-ADJ/NOPB | Texas Instruments | TO-220//3A POSITIVE LOW DROPOUT REG RoHS : Compliant | 1,050 | |||
| LM1085IS-12/NOPB | Texas Instruments | LM1085IS-12/NOPB , LDO 电压调节器, 3A, 12 V输出, 2.6 → 18 V输入, 3针 TO-263封装 RoHS : Compliant | 1,000 | |||
| LM1085ISX-5.0/NOPB | Texas Instruments | IC REG LDO 5V 3A DDPAK RoHS : Compliant | 1,000 | |||
 ComSIT USA | BI30001085 | AVED ELECTRONICS | AVAILABLE EU | 26 | ||
| BI20001085 | IMESA | AVAILABLE EU | 23 | |||
| LT1085CTPBF | LINEAR TECHNOLOGY/ANALOG DEVICES | AVAILABLE EU | 2 | |||
| 1085880000 | Weidmüller Interface GmbH & Co. KG | AVAILABLE EU RoHS : Compliant | 1,897 | |||
ComSIT USA | LD1085D2MR | STMicroelectronics | Adjustable Positive LDO Regulator, 1.225V Min, 1.275V Max, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 7,000 | ||
| LD1085P | STMicroelectronics | 3 AMP LOW DROP POSITIVE ADJUSTABLE VOLTAGE REGULATOR Adjustable Positive LDO Regulator, 1.225V Min, 1.275V Max, 1.5V Dropout, BIPolar RoHS : Compliant | 2,134 | |||
| LT1085IM36TR | Linear Technology | 3A LOW DROPOUT POSITIVE FIXED REGULATOR Fixed Positive LDO Regulator, 3.6V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 1,118 | |||
| LT1085CT | Linear Technology | 3 AMPERE LOW DROPOUT POSITIVE ADJUSTABLE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 1,019 | |||
| LD1085D2M33R | SGS Semiconductor Ltd | 3 AMP LOW DROP POSITIVE FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 1,000 | |||
| LM1085ISX33NOPB | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 745 | |||
EZ1085CMTR | Semtech Corporation | 3 AMP POSITIVE VOLTAGE REGULATOR Adjustable Positive LDO Regulator, 1.3V Min, 5.7V Max, 1.35V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 505 | |||
| LM1085ISADJ | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 472 | |||
| LD1085V | SGS Semiconductor Ltd | 3 AMP LOW DROP POSITIVE ADJUSTABLE VOLTAGE REGULATOR Adjustable Positive LDO Regulator, 1.225V Min, 1.275V Max, 1.5V Dropout, BIPolar RoHS : Compliant | 350 | |||
| LD1085V18 | SGS Semiconductor Ltd | 3AMP LOW DROP POSITIVE FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 1.8V, 1.5V Dropout, BIPolar RoHS : Not Compliant | 250 | |||
| LM1085IT33 | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 209 | |||
| LH1085 | Siemens | Electronic Component RoHS : Not Compliant | 200 | |||
| LM1085ISADJNOPB | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 154 | |||
| AZ1085S18EI | Diodes-BCD | Electronic Component RoHS : Compliant | 125 | |||
| LT1085CTPBF | Linear Technology | 3 AMPERE LOW DROPOUT POSITIVE ADJUSTABLE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSFM3 RoHS : Compliant | 88 | |||
 GLYN GmbH & Co. KG | ES51085FLW | Emerging Display Technolgies | LCD 128 x 64, FSTN positive, white LED Sitronix S | 17 | ||
 Interstate Connecting Components | 97-3106A-28(621)(0850) | Amphenol Industrial Operations | SHELL |
| 246 | |
| 97-4102A-28-12S(621)(0850 | Amphenol Industrial Operations | 0 | ||||
| 97-3101A-24(621)(0850) | Amphenol Industrial Operations | SHELL |
| 0 | ||
| 43-01085 | Conec Corporation | MALE SOCKET M12X1 WITH WIRES F RoHS : Compliant | 0 | |||
| 11108509-00 | TE Connectivity | AST4520Y00015P4X1355-SS:CTO-13 | 0 | |||
| 11108554-00 | TE Connectivity | AST4530I00240H4X9354:CTO-13000 RoHS : Not Compliant | 0 | |||
| 121085-0027 A | ITT Interconnect Solutions |
| 0 | |||
| ZPF000000000108530 | TE Connectivity | FDBA 50-12-10 PW-K-A6207 RoHS : Compliant | 0 | |||
| 11108520-00 | TE Connectivity | AST4520Y00069H4X1354-SS:CTO-13 | 0 | |||
| 11108538-00 | TE Connectivity | AST4530I00020P3X9354:CTO-13000 | 0 | |||
| 11108583-00 | TE Connectivity | AST45PT1L00208H4X1L004:CTO-130 | 0 | |||
| 97-3100A-22(621)(0850) | Amphenol Industrial Operations |
| 0 | |||
| C14621R0108544 | Amphenol Sine Systems | C146 HOOD SIZE A10 SINGLE LEVE | 0 | |||
| C09131T0051085U | Amphenol Sine Systems | FEMALE RECEPTACLE FLANGE FRONT | 0 | |||
| 10127721-085NTLF | Amphenol FCi | 10127721-085NTLF-MTK 3.0 08P D | 0 | |||
 NexGen Digital | LT1085CT-3.3 | Linear Technology | RoHS : Not Compliant | 15 | ||
 PEI Genesis | C146-21R010-852-8 | Amphenol Tuchel |
| 0 | ||
| M85049/10-85B | SOURIAU-SUNBANK |
| 0 | |||
| J1085B-12S-1RN | SOURIAU-SUNBANK |
| 0 | |||
| 110855-0013 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| TP1085-2 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| TP1085-1 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| D110853-1 | ITT Interconnect Solutions |
| 0 | |||
| C146-21R010-852-1 | Amphenol Tuchel |
| 0 | |||
| M85049/10-85N | Amphenol PCD |
| 0 | |||
| M85049/10-85N | SOURIAU-SUNBANK |
| 0 | |||
| J94-28108-5 | SOURIAU-SUNBANK |
| 0 | |||
| C146-21R010-854-4 | Amphenol Tuchel |
| 0 | |||
| M85049/10-85W | SOURIAU-SUNBANK |
| 0 | |||
| M85049/10-85W | Amphenol PCD |
| 0 | |||
| M85049/10-85Z | Amphenol PCD |
| 0 | |||
 Powell Electronics | HMTMS-108-51-S-S-180 | Samtec Inc | .050" x .100" High-Temp Variable Post He RoHS : Compliant |
| 253 | |
| MTMS-108-51-S-S-155 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 123 | ||
| MTMS-108-51-G-S-147 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 123 | ||
| MTMS-108-53-G-S-280 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 123 | ||
| MTMS-108-51-S-S-165 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 123 | ||
| MTMS-108-51-L-D-180 | Samtec Inc | PCB Header, 2.00mm Pitch, SMT, Male, Sta RoHS : Compliant |
| 114 | ||
| HTMS-108-53-G-D | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 114 | ||
| HTMS-108-57-S-S-SM | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 90 | ||
| ESQ-108-58-S-D | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 60 | ||
| DW-36-14-L-S-1085 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 38 | ||
| DW-36-14-L-D-1085 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 33 | ||
| ESW-108-59-L-S | Samtec Inc | .100 Low Profile Variable Post Height Te RoHS : Compliant |
| 32 | ||
| 1108516-1 | TE Connectivity | Unspecified Connectors RoHS : Compliant |
| 28 | ||
| 11108583-00 | TE Connectivity | SENSOR (TE REF 11108583-00) |
| 5 | ||
| 11108509-00 | TE Connectivity | SENSOR (TE REF 11108509-00) |
| 2 | ||
 Richardson RFPD | 512MCA001085AAG | Skyworks Solutions Inc | Oscillator XO 50MHz/ 200MHz ±30ppm CMOS 52% 3.3V 6 RoHS : Compliant |
| 0 | |
| SI5332FD10850-GM3R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 48-P RoHS : Compliant | 0 | |||
| SI5332HD11085-GM2R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 40-P RoHS : Compliant | 0 | |||
| LT1085IM-3.6#PBF | Analog Devices Inc | LDO Regulator Pos 3.6V 3A 4-Pin(3+Tab) DDPAK Tube RoHS : Compliant |
| 0 | ||
| CL1108-5-50TR-R | Eaton Corporation | Inductor Power 0.4uH/0.05uH 20% 1MHz Ferrite 80A 0 RoHS : Compliant |
| 0 | ||
| HSO14SMA1-085M | Rakon Limited | 5MHz Oven Controlled Crystal Oscillator | 0 | |||
| 108537-HMC498LC4 | Analog Devices Inc | HMC498LC4 RF Amplifier Evaluation Board RoHS : Compliant |
| 0 | ||
| 512PCA001085AAG | Skyworks Solutions Inc | Oscillator XO 50MHz/ 200MHz ±30ppm CMOS 52% 2.5V 6 RoHS : Compliant |
| 0 | ||
| LT1085IM#PBF | Analog Devices Inc | LDO Regulator Pos 1.25V to 28.5V 3A 4-Pin(3+Tab) D RoHS : Compliant |
| 0 | ||
| LT1085IM#TRPBF | Analog Devices Inc | LDO Regulator Pos 1.25V to 28.5V 3A 4-Pin(3+Tab) D RoHS : Compliant |
| 0 | ||
| T100108558-02-LF | Astrodyne TDI Power Supplies & EMI Filters | UPS RoHS : Compliant | 0 | |||
| SMP1331-085-EVB | Skyworks Solutions Inc | EVALUATION BOARD RoHS : Compliant | 0 | |||
| 512PCA001085AAGR | Skyworks Solutions Inc | Oscillator XO 50MHz/ 200MHz ±30ppm CMOS 52% 2.5V 6 RoHS : Compliant |
| 0 | ||
| 131085-HMC896LP4E | Analog Devices Inc | FILTER - TUNABLE, BAND PASS Development Kit RoHS : Compliant | 0 | |||
ATS-FPX035035010-85-C3-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive Straight Aluminum 6063 24.1C/W B RoHS : Compliant |
| 0 | ||
 Chip 1 Exchange | 2108517-2 | TE Connectivity | INSTOCK RoHS : Compliant | 73,450 | ||
| 26-48-1085 | Molex | INSTOCK RoHS : Compliant | 17,843 | |||
| 12110853 | INSTOCK | 14,000 | ||||
| 5-2324108-5 | TE Connectivity | INSTOCK RoHS : Compliant | 7,888 | |||
| LT1085CM | LTECH | INSTOCK | 2,414 | |||
| 272217108576 | TDK Corporation | INSTOCK | 2,286 | |||
| LT1085CT | INSTOCK | 2,032 | ||||
| LM1085ISX-ADJ/NOPB | Texas Instruments | INSTOCK RoHS : Compliant | 1,895 | |||
| 1928301085 | Bosch Sensortec | INSTOCK | 785 | |||
| LT1085CM | INSTOCK | 531 | ||||
| LH701085 | Sharp Microelectronics of the Americas | INSTOCK | 200 | |||
| SR130/1085A | Advanced-Connectek Inc | INSTOCK | 146 | |||
| LTA-1085 | INSTOCK | 116 | ||||
| 33108561 | INSTOCK | 28 | ||||
| LM1085IT-ADJ | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 17 | |||
 Avnet Abacus | 522071085 | Molex | FFC FPC Board Connector Right Angle 1 mm 10 Contacts Receptacle EasyOn 52207 Surface Mount - Tape and Reel (Alt: 522071085) RoHS : Compliant | 4,000 | ||
| VC121085S151DP | Kyocera AVX Components | TVS Varistor 60 V 85 V 150 V 1210 3225 Metric Multilayer Varistor MLV (Alt: VC121085S151DP) RoHS : Compliant | 4,000 | |||
| 3KYY1108-554 | Grayhill Inc | CAN Keypad custom (Alt: 3KYY1108-554) RoHS : Compliant | 103 | |||
| 1108500 | Phoenix Contact | FKIC 25 4STGF508 FKIC254STGF508 (Alt: 1108500) RoHS : Compliant | 0 | |||
| 1085039 | Phoenix Contact | FL SWITCH 1005N FLSWITCH1005N (Alt: 1085039) RoHS : Compliant | 0 | |||
| 1085165 | Phoenix Contact | FL SWITCH 1008NT FLSWITCH1008NT (Alt: 1085165) RoHS : Compliant | 0 | |||
| 424108504 | Molex | (Alt: 424108504) RoHS : Compliant | 0 | |||
| 108505702 | OmniOn Power Inc | (Alt: 108505702) RoHS : Not Compliant | 0 | |||
| 1108596-1 | TE Connectivity | AMP11085961 (Alt: 1108596-1) RoHS : Compliant | 0 | |||
| 1108516-1 | TE Connectivity | (Alt: 1108516-1) RoHS : Compliant | 0 | |||
| 1011-085-0405 | TE Connectivity | (Alt: 1011-085-0405) RoHS : Compliant | 0 | |||
| 008261243310852 | Kyocera AVX Components | Shunt Connector 254mm pitch (Alt: 008261243310852) RoHS : Not Compliant | 0 | |||
| CL1108-5-50TR-R | Eaton Corporation | - Tape and Reel (Alt: CL1108-5-50TR-R) RoHS : Compliant | 0 | |||
| VCAS121085S151TP | Kyocera AVX Components | (Alt: VCAS121085S151TP) RoHS : Compliant | 0 | |||
| 10127721-085GRLF | Amphenol Corporation | Connector Power Header 8 Position 3mm Solder Straight Through Hole 8 Terminal 1 Port TR - Tape and Reel (Alt: 10127721-085GRLF) RoHS : Not Compliant | 0 | |||
Avnet Asia | BPMI0011085075NK0E | Pulse Electronics Corporation | (Alt: BPMI0011085075NK0E) RoHS : Compliant |
| 1,000 | |
| 0417910852 | Molex | Pin Header, 5 Contacts, 1 Row, 3.96mm, Gold, 7A, Straight, Partially Shrouded, Brass, Wire-to-Board (Alt: 0417910852) RoHS : Compliant | 0 | |||
| 1-2410850-1 | TE Connectivity | RCPT CONN QSFP 112 STACKED, ALI (Alt: 1-2410850-1) RoHS : Compliant | 0 | |||
| 1-2410850-2 | TE Connectivity | RCPT CONN QSFP 112 STACKED, ALI (Alt: 1-2410850-2) RoHS : Compliant | 0 | |||
| X1E000021085300 | Epson Electronics America Inc | (Alt: X1E000021085300) RoHS : Compliant | 0 | |||
| 095-900-10852-1 | Amphenol Corporation | (Alt: 095-900-10852-1) RoHS : Compliant |
| 0 | ||
| 301085589 | Qnity Laird | MEC FOAM LOSSY 9X6X3.17MM (Alt: 301085589) RoHS : Compliant | 0 | |||
| 2-1419108-5 | TE Connectivity | (Alt: 2-1419108-5) RoHS : Compliant | 0 | |||
| 811085-000 | TE Connectivity | (Alt: 811085-000) RoHS : Compliant | 0 | |||
| VSMA1085250 | Vishay Intertechnologies | HiPow IR Emitting Diode 850nm -e3 (Alt: VSMA1085250) RoHS : Compliant | 0 | |||
| 0522071085 | Molex | FFC / FPC Board Connector, 10 Contacts, 1 Row, 1mm, Top, Tin-Bismuth Plated, SMT, Right Angle, 0.3mm (Alt: 0522071085) RoHS : Compliant | 0 | |||
| 10127721-085GRLF | Amphenol Corporation | (Alt: 10127721-085GRLF) RoHS : Compliant | 0 | |||
| 10127721-085SLF | Amphenol Corporation | (Alt: 10127721-085SLF) RoHS : Compliant | 0 | |||
| 2108517-2 | TE Connectivity | (Alt: 2108517-2) RoHS : Compliant | 0 | |||
| 2150711085 | Molex | (Alt: 2150711085) RoHS : Compliant | 0 | |||
 Avnet Silica | LD1085D2M25R | STMicroelectronics | LDO Regulator Pos 25V 3A 4Pin3Tab D2PAKA TR (Alt: LD1085D2M25R) RoHS : Compliant | 274,000 | ||
| LD1085D2M18R | STMicroelectronics | Fixed LDO Voltage Regulator 425V to 30V 13V drop 18V3A out TO263AA3 (Alt: LD1085D2M18R) RoHS : Compliant | 105,000 | |||
| LD1085D2M-R | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2M-R) RoHS : Compliant | 76,000 | |||
| LD1085D2M33R | STMicroelectronics | Fixed LDO Voltage Regulator 63V to 30V 13V drop 33V3A out TO263AA3 (Alt: LD1085D2M33R) RoHS : Compliant | 76,000 | |||
| LD1085D2T-R | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2T-R) RoHS : Compliant | 58,000 | |||
| LD1085D2T33R | STMicroelectronics | LDO Regulator Pos 33V 3A 3Pin2Tab D2PAK TR (Alt: LD1085D2T33R) RoHS : Compliant | 1,000 | |||
| STA1085ELA3 | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA Tray (Alt: STA1085ELA3) RoHS : Compliant | 0 | |||
| EZ1085ACM-TR | Semtech Corporation | (Alt: EZ1085ACM-TR) RoHS : Compliant | 0 | |||
ZXCT1085E5TA | Diodes Incorporated | Current Sensor Unidirectional 1 SOT25 5 Pins (Alt: ZXCT1085E5TA) RoHS : Compliant | 0 | |||
| STA1085EOATR | STMicroelectronics | MID INFOTAINMENT (Alt: STA1085EOATR) RoHS : Compliant | 0 | |||
| ZXCT1085QE5TA | Diodes Incorporated | Current Sense Amplifier High Side 500 kHz SOT25 5 Pins 40 C 125 C (Alt: ZXCT1085QE5TA) RoHS : Compliant | 0 | |||
| TJA1085GHN/0Z | NXP Semiconductors | FlexRay Transceiver 10Mbps 44Pin HVQFN EP TR (Alt: TJA1085GHN/0Z) RoHS : Compliant | 0 | |||
| STA1085EOA3TR | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA TR (Alt: STA1085EOA3TR) RoHS : Compliant | 0 | |||
| TC1108-5.0VDBTR | Microchip Technology Inc | LDO Regulator Pos 5V 03A 4Pin3Tab SOT223 TR (Alt: TC1108-5.0VDBTR) RoHS : Compliant | 0 | |||
| OX-1740-DEE-1085-10M0000000 | Microchip Technology Inc | (Alt: OX-1740-DEE-1085-10M0000000) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | WH-PS710-850 | Nipron Co | Peripheral cable |
| 1 | |
| WH-PP610-850 | Nipron Co | RoHS : Compliant |
| 0 | ||
| CAB.01085 | Taoglas Antenna Solutions | IPEX MHFI(U.FL) to 200mm 1.37mm Black SMA(F)BKST |
| 0 | ||
 Component Electronics, Inc | AME1085AMCT | AME Inc | IN STOCK SHIP TODAY |
| 150 | |
| AME1085ACUT-3 | AME Inc | IN STOCK SHIP TODAY | 130 | |||
| AME1085ACDT | AME Inc | IN STOCK SHIP TODAY | 100 | |||
| 10-85-0208 | IN STOCK SHIP TODAY | 50 | ||||
| AME1085DCDT | AME Inc | IN STOCK SHIP TODAY |
| 50 | ||
| AV108-59 | Alpha Industries | IN STOCK SHIP TODAY |
| 40 | ||
| EZ1085CM | Semtech Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 30 | ||
| 0522071085 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 26 | ||
| 52207-1085 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 26 | ||
| LM1085IT-5.0 | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 23 | ||
| LT1085CM | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant | 21 | |||
| MB100H-10.855275MHZ | MMD | IN STOCK SHIP TODAY | 16 | |||
| LT1085CM-3.3#PBF | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
| 10850-054 | nVent Schroff | IN STOCK SHIP TODAY |
| 9 | ||
| LT1085CT | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
 DB Roberts | E5-1-085-090 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | ||
| E5-1-085-171 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-085-031 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 110857 | Essentra Components | 0 | ||||
| E5-1-085-071 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 10854 | Heyco | HCPS-22 NATURAL | 0 | |||
| E5-1-085-181 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-085-100 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 135010859902 | Essentra Components | 0 | ||||
| 07900-01085 | Avdel | GUIDE TUBE | 0 | |||
| 110854 | Essentra Components | 0 | ||||
| 07005-01085 | Avdel | POLY TUBE BLUE DIA 6 X 153MM | 0 | |||
| E5-1-085-160 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E3-1011-085 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E5-1-085-120 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
 EBV Elektronik | LD1085V | STMicroelectronics | LDO Regulator Pos 125V to 28V 3A 3Pin3Tab TO220 Tube (Alt: LD1085V) RoHS : Compliant | 1,100 | ||
| LD1085D2M-R | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2M-R) RoHS : Compliant | 1,000 | |||
| LD1085D2T33R | STMicroelectronics | LDO Regulator Pos 33V 3A 3Pin2Tab D2PAK TR (Alt: LD1085D2T33R) RoHS : Compliant | 1,000 | |||
| VSMA1085600 | Vishay Intertechnologies | (Alt: VSMA1085600) RoHS : Compliant | 600 | |||
| FP11085_LISA2-RS-CLIP | LEDIL | LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11085_LISA2-RS-CLIP) RoHS : Compliant | 100 | |||
| SIM7912G-M2 S2-1085F-Z306Z | SIMCom | MultiBand LTEFDDLTETDDHSPA module (Alt: SIM7912G-M2 S2-1085F-Z306Z) RoHS : Compliant | 2 | |||
| LD1085V50 | STMicroelectronics | LDO Regulator Pos 5V 3A 3Pin3Tab TO220 Tube (Alt: LD1085V50) RoHS : Compliant | 0 | |||
| P3T1085UKZ | NXP Semiconductors | Temperature Sensor IC Digital 05C 40 C 125 C WLCSP 6 Pins (Alt: P3T1085UKZ) RoHS : Compliant | 0 | |||
| STA1085ELA3 | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA Tray (Alt: STA1085ELA3) RoHS : Compliant | 0 | |||
| STA1085EOATR | STMicroelectronics | MID INFOTAINMENT (Alt: STA1085EOATR) RoHS : Compliant | 0 | |||
| LD1085D2M33R | STMicroelectronics | Fixed LDO Voltage Regulator 63V to 30V 13V drop 33V3A out TO263AA3 (Alt: LD1085D2M33R) RoHS : Compliant | 0 | |||
| TJA1085GHN/0Z | NXP Semiconductors | FlexRay Transceiver 10Mbps 44Pin HVQFN EP TR (Alt: TJA1085GHN/0Z) RoHS : Compliant | 0 | |||
| P3T1085UK-ARD | NXP Semiconductors | Evaluation Board P3T1085UK Digital Temperature Sensor Sensor (Alt: P3T1085UK-ARD) RoHS : Compliant | 0 | |||
TJA1085HN,118 | NXP Semiconductors | FlexRay Transceiver 4TX 4RX 10Mbps 44Pin HVQFN EP TR (Alt: TJA1085HN,118) RoHS : Compliant | 0 | |||
| SIM7912G-M2 S2-1085D | SIMCom | MultiBand LTEFDDLTETDDHSPA module (Alt: SIM7912G-M2 S2-1085D) RoHS : Compliant | 0 | |||
 ECCO | 97-3102A-18(621)(0850) | Amphenol Industrial Operations |
| 2,614 | ||
| 97-3106A-22(621)(0850) | Amphenol Industrial Operations |
| 546 | |||
| 97-3106A-22(621)(0850) | Amphenol Industrial Operations |
| 546 | |||
| 97-3100A-14S(621)(0850) | Amphenol Industrial Operations |
| 428 | |||
| 97-3106A-20(B)(621)(0850) | Amphenol Industrial Operations |
| 128 | |||
| 97-3102A-12S(621)(0850) | Amphenol Industrial Operations |
| 100 | |||
| 97-3101A-18(621)(0850) | Amphenol Industrial Operations |
| 50 | |||
| 97-3102A-16S(621)(0850) | Amphenol Industrial Operations |
| 49 | |||
| 97-3102A-16S(621)(0850) | Amphenol Industrial Operations |
| 49 | |||
| 97-3102A-18(B)(621)(0850) | Amphenol Industrial Operations |
| 41 | |||
| 97-3101A-14S(B)(621)(0850 | Amphenol Industrial Operations |
| 25 | |||
| 97-3101A-28(621)(0850) | Amphenol Industrial Operations |
| 24 | |||
| 97-3101A-28(621)(0850) | Amphenol Industrial Operations |
| 24 | |||
| 97-3102A-28(621)(0850) | Amphenol Industrial Operations |
| 3 | |||
| 97-3102A-28(621)(0850) | Amphenol Industrial Operations |
| 3 | |||
 FDH Electronics | 512001085 | BJG Electronics | BJG Microwave C | 1,785,834 | ||
| 512851085 | BJG Electronics | BJG Microwave C | 1,785,834 | |||
| 512321085 | W L Gore & Associates | BJG Microwave C | 1,693 | |||
| M23053/5-108-5 | SUMITOMO ELECTRIC Industries Ltd | Harness Mgmt | 730 | |||
| 8001085 | Ellsworth Adhesives | Consumable | 300 | |||
| PS10-851-N | Connector Technology Inc | Circular Conn |
| 256 | ||
| PS10-851-UP | Connector Technology Inc | Connector Acc | 224 | |||
| J1085E-4S-3 | SOURIAU-SUNBANK | Backshells & Ac | 6 | |||
| J599EIE-1085/A10 | SOURIAU-SUNBANK | Connector 38999 |
| 4 | ||
| TF-1085 | Connector Technology Inc | Tooling - Test | 1 | |||
| 10-494891-085 | Amphenol Aerospace | Connector 38999 | 0 | |||
| M85049/10-85N | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M85049/10-85W | Amphenol PCD | Backshells & Ac |
| 0 | ||
7012-1085 | Amphenol SV Microwave | Cable Assembly RoHS : Compliant |
| 0 | ||
| 440HS148M2108-5S | Glenair Inc | Backshells & Ac | 0 | |||
 Flip Electronics | NCP81085MTTXG | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,000 | |
| SI1085-A-GMR | Silicon Laboratories Inc | Stock, Ship Today |
| 1,568 | ||
 Maritex | LM1085IT-ADJ/NOPB | Texas Instruments | LDO Regulators; LM1085IT-ADJ/NOPB; TEXAS INSTRUMENTS; 3; 1; 3 A RoHS : Compliant |
| 25,714 | |
UZ1085L-33-TN3-R | Unisonic Technologies Co Ltd | LDO Regulators; UZ1085L-33-TN3-R; UTC RoHS : Compliant |
| 2,648 | ||
| LM1085ISX-ADJ/NOPB | Texas Instruments | LDO Regulators; LM1085ISX-ADJ/NOPB; TEXAS INSTRUMENTS; 3; 1; 3 A; 15 V RoHS : Compliant |
| 1,908 | ||
TPS61085PWR | Texas Instruments | DC DC Converters; TPS61085PWR; TEXAS INSTRUMENTS; 8; Boost; 1.2 mm; 1 RoHS : Compliant |
| 1,474 | ||
ADM1085AKSZ-REEL7 | Analog Devices Inc | Power Management ICs (PMICs); ADM1085AKSZ-REEL7; ANALOG DEVICES; 6; Surface Mount; SC; 1.1 mm RoHS : Compliant |
| 1,089 | ||
| LM1085R-3.3V | HTC Korea | Voltage Regulator; linear, LDO; fixed; Vout: 3.3V; Vin: 12V; Vd: 1.5V; 3A; -10+70 deg.C; SMD; TO263(D2PAK) |
| 337 | ||
| TPS61085DGKR | Texas Instruments | DC DC Converters; TPS61085DGKR; TEXAS INSTRUMENTS; 8; Boost; 0 m; 1 RoHS : Compliant |
| 212 | ||
| FP11085_LISA2-RS-CLIP | LEDIL | Lens for LED high power; angle: 9 to 26 degrees FWHM; Number of LEDs: 1; Dimensions: round 10mm; Height: 6.8mm; meterial: PMMA; PC; Fastening: glue; clips |
| 25 | ||
 Master Electronics | 97-3101A-14S(B)(621)(0850 | Amphenol Commercial | RoHS : Compliant |
| 25 | |
| CLB-00001085 | Carling Technologies | CLB50327J6NBF50 RoHS : Compliant |
| 0 | ||
| MTMS-108-51-L-D-135 | Samtec Inc | .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMS-108-51-L-D-180 | Samtec Inc | .050 X .100 VARIABLE RoHS : Compliant |
| 0 | ||
| MTMS-108-51-S-S-155 | Samtec Inc | .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMS-108-53-G-S-010 | Samtec Inc | .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMS-108-54-G-D-001-001 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMS-108-54-G-D-100 | Samtec Inc | .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMS-108-55-G-S-100 | Samtec Inc | .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-121-21-L-S-1085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MW-07-03-G-D-161-085-P-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| RCV-00108546 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| DW-02-14-F-S-1085 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-09-14-F-T-1085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-16-14-L-D-1085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Neutron USA | 1085 | Adafruit Industries | Data Conversion IC Development Tools ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier - STEMMA QT / Qwiic |
| 50 | |
| 6104201108501 | HARTING Technology Group | Heavy Duty Power Connectors Han PushPull Power L Cable Coupling, AIDA Connector, Metal RoHS : Compliant |
| 7 | ||
| 10-2506.1085 | EAO AG | LED,Single Color,BA9,Green,Lumi Intensity 1050 mcd,7mA,6VDC RoHS : Compliant |
| 5 | ||
| 601.0853.002 | Altech Corporation | LIMIT SWITCH, REMOTE RESET,SGS-SA2Z W F3 24V, 24V RESET |
| 3 | ||
| 1085260 | Phoenix Contact | Thermal Transfer Printer, incl. Euro/US power cable and USB cable, THERMOMARK ROLL 2.0 |
| 0 | ||
| 1085039 | Phoenix Contact | Industrial Ethernet Switch, 5 Port, Unmanaged, FL SWITCH 1005N RoHS : Compliant |
| 0 | ||
| 1085165 | Phoenix Contact | Industrial Ethernet Switch, 8 RJ45 ports 10/100 Mbps, FL SWITCH 1008NT RoHS : Compliant |
| 0 | ||
| 1085256 | Phoenix Contact | Industrial Ethernet Switch, 8 Port with 10/100 Mbps, Unmanaged, FL SWITCH 1008N RoHS : Compliant |
| 0 | ||
| B6-30-10-85 | ABB Low Voltage Products and Systems | Mini Contactor, 3P, Control: 380-415VAC, Main: 3NO, Aux: 1NO, Screw Terminals, GJL1211001R8105 |
| 0 | ||
| 1085115 | Phoenix Contact | Unmanaged Ethernet Switch, 16 RJ45 ports with 10/100/1000 Mbps on all ports, FL SWITCH 1116T RoHS : Compliant |
| 0 | ||
| 1085171 | Phoenix Contact | Ethernet Switch, 7 port unmanaged gigabit, 5 copper, 2 SFP, FL SWITCH 1105N-2SFP RoHS : Compliant |
| 0 | ||
| 1108542 | Phoenix Contact | Managed Ethernet Switches SCX 4POE 2TX RoHS : Compliant |
| 0 | ||
| 1085179 | Phoenix Contact | Ethernet Switch, 5 port unmanaged switch, 4 copper, 1 ST FO, FL SWITCH 1004N-FX ST RoHS : Compliant |
| 0 | ||
| 1085800 | Phoenix Contact | EV Charger Accessories EV-T1CCS-MF-M4X10 |
| 0 | ||
| 1085170 | Phoenix Contact | Industrial Ethernet Switch, 5 RJ45 ports with 10/100 Mbps on all ports, FL SWITCH 1005NT RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C10858 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm. SMA Male to SMP Female Non-Magnetic Cable Using PE-SR405-NM Coax., Pasternack’s PE3C10858 non-magnetic SMA male to SMP female RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10858 can also be known as a non-magnetic SMA plug to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10858 SMA plug to SMP jack cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10858 can also be used in the other direction and will be an SMP female to SMA male cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. | 50 | ||
| PE3C10857-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Non-Magnetic Cable 36 Inch Length Using PE-SR405-NM Coax., Pasternack’s PE3C10857-36 non-magnetic SMA male to SMA male RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10857-36 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10857-36 SMA plug to SMA plug cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors and has a 50 Ohm impedance. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements. |
| 11 | ||
| PE3C10858-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMP Female Non-Magnetic Cable 12 Inch Length Using PE-SR405-NM Coax., Pasternack’s PE3C10858-12 non-magnetic SMA male to SMP female RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10858-12 can also be known as a non-magnetic SMA plug to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10858-12 SMA plug to SMP jack cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10858-12 can also be used in the other direction and will be an SMP female to SMA male cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. |
| 10 | ||
| PE3C10850-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMP Female to SMP Female Non-Magnetic Cable 9 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10850-9 non-magnetic SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10850-9 can also be known as a non-magnetic SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMP female to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10850-9 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 9-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 5 | ||
| PE3C10850-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMP Female to SMP Female Non-Magnetic Cable 24 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10850-24 non-magnetic SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10850-24 can also be known as a non-magnetic SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMP female to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10850-24 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 3 | ||
| PE3C10855-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: BZ4, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Female Bulkhead to BNC Female Bulkhead Non-Magnetic Cable 24 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10855-24 non-magnetic BNC female bulkhead to BNC female bulkhead RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3C10855-24 can also be known as a non-magnetic BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10855-24 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. This PE3C10855-24 BNC jack to BNC jack cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a BZ4 body with copper-tin-zinc alloy plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC non-magnetic RF cable assembly as per your requirements. |
| 1 | ||
| PE3C10855-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: BZ4, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Female Bulkhead to BNC Female Bulkhead Non-Magnetic Cable 36 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10855-36 non-magnetic BNC female bulkhead to BNC female bulkhead RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3C10855-36 can also be known as a non-magnetic BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10855-36 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. This PE3C10855-36 BNC jack to BNC jack cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a BZ4 body with copper-tin-zinc alloy plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC non-magnetic RF cable assembly as per your requirements. |
| 1 | ||
| PE3C10851-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMP Female Right Angle to SMP Female Right Angle Non-Magnetic Cable 6 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10851-6 non-magnetic right angle SMP female to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and a right angle SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10851-6 can also be known as a non-magnetic right angle SMP jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10851-6 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a bronze body with copper-tin-zinc alloy over silver plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP right angle jack to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10856-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Non-Magnetic Cable 12 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10856-12 non-magnetic SMA male to SMA male RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10856-12 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10856-12 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10856-12 SMA plug to SMA plug cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10851LF-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: C, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. C Female to N Female Cable 24 Inch Length Using RG393 Coax, LF Solder., Radio frequency assembly C female to N female cable 24 inch length using RG393 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The C female to N female cable 24 inch length using RG393 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type C to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type C cable connection on one end and a type N cable connection on the other. Our type C to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W10851LF-24 can also be known as a type C jack to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10851LF-24 RF cable has a FEP jacket of 0.390-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Type C jack to type N jack cable assembly PE3W10851LF-24 is built with RG393 which is a flexible coax type. The Pasternack flexible type C cable assembly is manufactured with type C to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10851LF-24 can also be used in the other direction and will be a type N female to type C female cable assembly if the opposite connectivity is required. Type C jack to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type C to type N cable assembly for quick shipment worldwide. Variations of type C and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type C to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10852-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMP Female Right Angle Non-Magnetic Cable 18 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10852-18 non-magnetic SMA male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and a right angle SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10852-18 can also be known as a non-magnetic SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10852-18 SMA plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 18-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10852-18 can also be used in the other direction and will be a right angle SMP jack to SMA plug cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3W01085LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. 1.0/2.3 Jack Bulkhead to 1.85mm Male Cable Using PE-SR405AL Coax with HeatShrink, LF Solder. PE3W01085LF/HS is a 1.0/2.3 jack bulkhead to 1.85mm male cable using PE-SR405AL coax. This Pasternack 1.0/2.3 jack bulkhead to 1.85mm male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 1.85mm for connector 2. Our jack 1.0/2.3 bulkhead to male 1.85mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W01085LF/HS 1.0/2.3 jack bulkhead to 1.85mm male cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3C10853-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 2.92mm Male to SMP Female Right Angle Non-Magnetic Cable 9 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10853-9 non-magnetic 2.92mm male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a 2.92mm cable connection on one end and a right angle SMP cable connection on the other. Our 2.92mm to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10853-9 can also be known as a non-magnetic 2.92mm plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our 2.92mm male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10853-9 2.92mm plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 9-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10853-9 can also be used in the other direction and will be a right angle SMP jack to 2.92mm plug cable assembly if the opposite connectivity is required. This non-magnetic 2.92mm plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMP cable assembly for quick shipment worldwide. Variations of 2.92mm and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10853 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm. 2.92mm Male to SMP Female Right Angle Non-Magnetic Cable Using PE-SR047-NM Coax., Pasternack’s PE3C10853 non-magnetic 2.92mm male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a 2.92mm cable connection on one end and a right angle SMP cable connection on the other. Our 2.92mm to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10853 can also be known as a non-magnetic 2.92mm plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our 2.92mm male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10853 2.92mm plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10853 can also be used in the other direction and will be a right angle SMP jack to 2.92mm plug cable assembly if the opposite connectivity is required. This non-magnetic 2.92mm plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMP cable assembly for quick shipment worldwide. Variations of 2.92mm and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to SMP non-magnetic RF cable assembly as per your requirements. | 0 | |||
| PE3C10851-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female Right Angle to SMP Female Right Angle Non-Magnetic Cable 12 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10851-12 non-magnetic right angle SMP female to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and a right angle SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10851-12 can also be known as a non-magnetic right angle SMP jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10851-12 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a bronze body with copper-tin-zinc alloy over silver plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP right angle jack to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
 TE Connectivity | 1-66108-5 | TE Connectivity | III+ SKT,26-24,TIN,STRIP Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 26 – 24 AWG Wire Size: .12 – .2 mm² Tin (Sn) Socket 26 – 24 AWG | Connector Contact | Part Number: 1-66108-5 | Internal Number: 1-66108-5 | TE Connectivity RoHS : Compliant |
| 16,000 | |
| 61085-1 | TE Connectivity | .156 MNL SOK PTPBR Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 20 – 14 AWG Operating Voltage: 600 VAC Tin (Sn) Socket 20 – 14 AWG | Connector Contact | Part Number: 61085-1 | Internal Number: 61085-1 | TE Connectivity RoHS : Compliant |
| 5,349 | ||
| 141085-2 | TE Connectivity | TERMINAL TAB FASTON PIDG 6,35 Quick Disconnect Terminal Type: Tab Insulation Option: Partially Insulated Wire Size: 11 – 10 AWG Wire Size: 4 – 6 mm² Wire Size: 8226 – 12066 CMA Tab Partially Insulated 11 – 10 AWG 4 – 6 mm² | Quick Disconnect | Part Number: 141085-2 | Internal Number: 141085-2 | Alias Number: 475376-000 | TE Connectivity RoHS : Compliant |
| 3,210 | ||
| 2108504-1 | TE Connectivity | 2.5 SDL 18P PLUG HSG 2ROW Number of Positions: 18 Connector & Housing Type: Plug Connector Product Type: Housing Mating Retention: With Mating Retention Type: Latching Feature Std Temp Signal Double Lock Plug | 18 Plug Housing With | Part Number: 2108504-1 | Internal Number: 2108504-1 | TE Connectivity RoHS : Compliant |
| 2,305 | ||
| 1-2273108-5 | TE Connectivity | M8 strght plug to M12 strgt socket AA Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 2 m Cable Assembly Length: 6.5 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 2 m 6.5 ft | M8 Ms - M12 Fs Cable Assy Bl | Part Number: 1-2273108-5 | Internal Number: 1-2273108-5 | TE Connectivity RoHS : Compliant |
| 88 | ||
| 2273108-5 | TE Connectivity | M8 strght plug to M12 strgt socket AA Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 2 m Cable Assembly Length: 6.5 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 2 m 6.5 ft | M8 Ms - M12 Fs Cable Assy Bl | Part Number: 2273108-5 | Internal Number: 2273108-5 | TE Connectivity RoHS : Compliant |
| 1 | ||
 Vyrian | ACS108-5SA | STMicroelectronics | TRIAC, 500V V(DRM), 0.3A I(T)RMS, TO-92 RoHS : Compliant | 13,271 | ||
LD1085DT25R | STMicroelectronics | Fixed Positive LDO Regulator, 2.5V, 1.5V Dropout, BIPolar, PSSO2 RoHS : Compliant | 12,034 | |||
| DS1085Z-25+ | Analog Devices Inc | Clock Generator, 133MHz, CMOS, PDSO8 RoHS : Compliant | 10,047 | |||
| RH1085K | Analog Devices Inc | Regulator, 1 Output, BIPolar RoHS : Not Compliant | 8,868 | |||
| 108537-HMC498LC4 | Analog Devices Inc | 7,113 | ||||
| LD1085V25 | STMicroelectronics | Fixed Positive LDO Regulator, 2.5V, 1.5V Dropout, BIPolar RoHS : Compliant | 7,089 | |||
| LT1085IM-3.6#PBF | Analog Devices Inc | Fixed Positive LDO Regulator, 3.6V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 6,572 | |||
| BUK108-50DL/T3 | Nexperia | Buffer/Inverter Based Peripheral Driver RoHS : Compliant | 6,508 | |||
| LT1085IT-5 | Analog Devices Inc | Fixed Positive LDO Regulator, 5V, 1.2V Dropout, PSFM3 RoHS : Not Compliant | 5,627 | |||
| LM1085I-ADJMDC | Texas Instruments | 1.5V Dropout, BIPolar RoHS : Compliant | 5,378 | |||
| LD1085D2T18R | STMicroelectronics | Fixed Positive LDO Regulator, 1.8V, 1.5V Dropout, BIPolar, PSSO2 RoHS : Compliant | 4,797 | |||
| 101085 | Micron Technology, Inc | 4,240 | ||||
| 46-01-08-500-05 | Grayhill Inc | Pushbutton Switch, DPDT, Momentary, Screw Terminal, Panel Mount RoHS : Compliant | 517 | |||
| 1010850100 | Weidmueller & Kg | Cable Assembly | 442 | |||
| MAX1085ACSA-T | Maxim Integrated Products | ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Serial Access, BICMOS, PDSO8 RoHS : Not Compliant | 361 | |||
 Waytek, Inc. | 12110853-L | Aptiv PLC | Metri-Pack 280 Tangless Female Terminal 12-10 Ga Loose Piece |
| 6,643 | |
 Win Source Electronics | TPS61085DGKR | Texas Instruments | IC REG BOOST ADJ 2A 8VSSOP RoHS : Compliant |
| 100,000 | |
TPS61085ATDGKRQ1 | Texas Instruments | IC REG BOOST ADJ 2A 8VSSOP RoHS : Compliant |
| 50,000 | ||
| LM1085ISX-ADJ | Texas Instruments | LM1085 3A Low Dropout Positive Regulators | IC REG LIN POS ADJ 3A DDPAK RoHS : Not Compliant |
| 31,500 | ||
| LM1085ISX-ADJ/NOPB | Texas Instruments | IC REG LDO ADJ 3A DDPAK RoHS : Compliant |
| 28,720 | ||
| ADM1085AKSZ | Analog Devices Inc | Processor Supervisor 0.6V 1 Active High/Open Drain 6-Pin SC-70 Reel |
| 15,000 | ||
| ADM1085AKS-REEL7 | Analog Devices Inc | Volt Supervisor Sequencer 0V to 22V 6-Pin SC-70 T/R RoHS : Not Compliant |
| 13,630 | ||
| LM1085IT-ADJ | Texas Instruments | IC REG LDO ADJ 3A TO220-3 RoHS : Not Compliant |
| 10,800 | ||
| LM1085ISX-5.0 | National Semiconductor Corporation | 3A Low Dropout Positive Regulators RoHS : Not Compliant |
| 10,250 | ||
| LM1085ISX-3.3 | Texas Instruments | IC REG LDO 3.3V 3A DDPAK RoHS : Not Compliant |
| 8,640 | ||
| LM1085ISX-3.3/NOPB | Texas Instruments | LDO Regulator Pos 3.3V 3A 4-Pin(3+Tab) DDPAK T/R / IC REG LDO 3.3V 3A DDPAK RoHS : Compliant |
| 7,780 | ||
| 52207-1085 | Molex | 1.00mm (.039") Pitch FFC/FPC Connector, SMT, Right Angle, ZIF, Top Contact StyleReceptacle, 10 Circuits, Lead-free, High Barrier Packaging RoHS : Compliant |
| 3,610 | ||
| LD1085D2M33R | STMicroelectronics | IC REG LDO 3.3V 3A D2PAK RoHS : Compliant |
| 2,819 | ||
| LM1085IS-12/NOPB | Texas Instruments | LM1085 3A Low Dropout Positive Regulators RoHS : Compliant |
| 1,230 | ||
| LT1085CT | Linear Technology | LT1085 - 1 to 60 MHz, Stratum 3 RoHS : Not Compliant |
| 1,000 | ||
| LT1085CM-3.3#PBF | Linear Technology | IC REG LDO 3.3V 3A D2PAK RoHS : Compliant |
| 530 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand