1093L-AF5-R Price, Distributor, Stock

1093L-AF5-R Distributor

Distributor

Part #

Manufacturer

Description

Price

Qty.
BuyNow

ComSIT USA

TPS61093DSKR

Texas Instruments

LOW INPUT BOOST CONVERTER WITH INTEGRATED POWER DIODE AND INPUT/OUTPUT ISOLATION Switching Regulator, Current-mode, 1.5A, 1400kHz Switching Freq-Max, PDSO10
RoHS : Compliant

4,245

UPC1093GE2

NEC Electronics Group

Regulator
RoHS : Not Compliant

3,333

MAL214231093E3

Vishay Intertechnologies

ALUMINUM ELECTROLYTIC CAPACITOR Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 250V, 20% +Tol, 20% -Tol, 10uF, Through Hole Mount
RoHS : Compliant

2,500

CY7C10935VCT

Cypress Semiconductor

128K X 8 STATIC RAM Standard SRAM, 128KX8, 35ns, CMOS, PDSO32
RoHS : Not Compliant

1,235

1093TR

Keystone Electronics Corp

Battery Holder 1, 2 CELL Holder (Open) PCB, Surface Mount T/R
RoHS : Compliant

130

10937P40

Rockwell Automation / Allen-Bradley

ALPHANUMERIC DISPLAY CONTROLLER Display Driver, 18-Segment, MOS, PDIP40
RoHS : Not Compliant

LTC1093CSWPBF

Linear Technology

6-CHANNEL, 10-BIT SERIAL I/O DATA ACQUISITION SYSTEM ADC, Successive Approximation, 10-Bit, 1 Func, 6 Channel, Parallel, Word Access, PDSO16
RoHS : Compliant

CY7C10935VC

Cypress Semiconductor

128K X 8 STATIC RAM Standard SRAM, 128KX8, 35ns, CMOS, PDSO32
RoHS : Not Compliant

PEI Genesis

C10-597109-381

Amphenol Corporation

1 : $0.0
100 : $0.0

S1093-103-4

SOURIAU-SUNBANK

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

S1093-185-4

SOURIAU-SUNBANK

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

KJL111109-312

ITT Interconnect Solutions

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

IPUN-AA-H2109-3N-S-W

Sure Seal Connections

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

M85049/109-36TZ18-6D

Amphenol PCD

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

M85049/10-93B

SOURIAU-SUNBANK

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

M85049/109-32KN17-6

Amphenol PCD

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

M85049/109-32TN16-6

Amphenol PCD

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

M85049/109-32TW17-6

Amphenol PCD

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

M85049/109-36KN19-6

Amphenol PCD

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

M85049/109-36TZ18-6

Amphenol PCD

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

M85049/109-36TN19-6D

Amphenol PCD

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

A10-936

Daniels Manufacturing Corporation (DMC)

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

410935-9001

Filconn

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

Powell Electronics

ESW-109-33-S-D-LL

Samtec Inc

.100" Elevated Socket Strip
RoHS : Compliant

1 : $4.88
25 : $4.28
50 : $3.89
100 : $3.54
500 : $3.2

ESW-109-37-G-D

Samtec Inc

.100" Elevated Socket Strip
RoHS : Compliant

1 : $4.28
25 : $3.74
50 : $3.41
100 : $3.1
500 : $2.8

ESW-109-33-G-S

Samtec Inc

.100" Elevated Socket Strip
RoHS : Compliant

1 : $3.47
50 : $2.74
100 : $2.29
500 : $1.94
1,000 : $1.75

ESW-109-33-S-S-LL

Samtec Inc

.100" Elevated Socket Strip
RoHS : Compliant

1 : $3.79
50 : $2.99
100 : $2.49
500 : $2.11
1,000 : $1.92

M85049/109-36TZ18-6

Glenair Inc

ACCESSORIES - SHRINK BOOT ADAPTERS
RoHS : Compliant

1 : $903.37
2 : $783.4
4 : $756.48
7 : $658.55
10 : $563.06

M85049/109-36TN18-6

Glenair Inc

ACCESSORIES - SHRINK BOOT ADAPTERS
RoHS : Compliant

1 : $857.98
2 : $744.06
4 : $718.48
7 : $625.48
10 : $534.8

M85049/109-32TW17-6

Glenair Inc

ACCESSORIES - SHRINK BOOT ADAPTERS

1 : $816.75
2 : $708.31
4 : $683.95
7 : $595.42
10 : $509.09

M85049/109-32KZ17-6D

Glenair Inc

ACCESSORIES - SHRINK BOOT ADAPTERS

1 : $853.14
2 : $739.86
4 : $714.42
7 : $621.94
10 : $531.77

M85049/109-32KN17-6

Glenair Inc

ACCESSORIES - SHRINK BOOT ADAPTERS

1 : $772.83
2 : $670.2
4 : $647.15
7 : $563.38
10 : $481.71

M85049/109-32TN16-6

Glenair Inc

ACCESSORIES - SHRINK BOOT ADAPTERS

1 : $765.15
2 : $663.55
4 : $640.74
7 : $557.8
10 : $476.94

M85049/109-36TN19-6D

Glenair Inc

ACCESSORIES - SHRINK BOOT ADAPTERS

1 : $898.66
2 : $779.34
4 : $752.54
7 : $655.12
10 : $560.15

M85049/109-36TW19-6

Glenair Inc

ACCESSORIES - SHRINK BOOT ADAPTERS

1 : $907.6
2 : $787.09
4 : $760.03
7 : $661.65
10 : $565.71

M85049/109-36TZ18-6D

Glenair Inc

ACCESSORIES - SHRINK BOOT ADAPTERS
RoHS : Compliant

1 : $938.92
2 : $814.23
4 : $786.26
7 : $684.48
10 : $585.23

M85049/109-36KN19-6

Glenair Inc

ACCESSORIES - SHRINK BOOT ADAPTERS

1 : $863.52
2 : $748.85
4 : $723.11
7 : $629.51
10 : $538.23

6609109-3

TE Connectivity

AC Power Entry Modules
RoHS : Compliant

3 : $45.97
8 : $45.13
15 : $44.28

Richardson RFPD

0735910932

Molex

CIRCULATOR/ISOLATOR
RoHS : Compliant

PSLSU85X-109-30V

Wall Industries Inc

85 Watts, AC/DC LED Power Supplies

HMC1093

Analog Devices Inc

Up/Down Conv Mixer 46.5GHz 6-Pin Die Tray
RoHS : Compliant

AA109-310LF

Skyworks Solutions Inc

DigitCntl MMIC Attnu
RoHS : Compliant

SI5338Q-B10932-GMR

Skyworks Solutions Inc

Clock Generator 5MHz to 710MHz-IN 200MHz-OUT 24-Pi
RoHS : Compliant

ATS-PCBT1093

Advanced Thermal Solutions Inc

Board Level Stamped Heat Sink
RoHS : Compliant

1 : $1.21
50,000 : $1.16
9 : $1.061

0735910933

Molex

CIRCULATOR/ISOLATOR
RoHS : Compliant

LTC1093CSW#PBF

Analog Devices Inc

6-Channel Single ADC SAR 26ksps 10-bit Serial 16-P
RoHS : Compliant

19 : $28.06

PSLSU120X-109-30V

Wall Industries Inc

120 Watts, AC/DC LED Power Supplies
RoHS : Compliant

PSLSU85X-109-32V

Wall Industries Inc

85 Watts, AC/DC LED Power Supplies

095-820-109-30A

Amphenol Corporation

Cable Assembly 1.37mm Cable 0.3m SMB to AMC M-M Ba
RoHS : Compliant

1 : $23.27
250 : $21.18
500 : $19.26
10,009 : $18.67

0735910939

Molex

CIRCULATOR/ISOLATOR
RoHS : Compliant

LTC1093CN#PBF

Analog Devices Inc

6-Channel Single ADC SAR 26ksps 10-bit Serial 16-P
RoHS : Compliant

19 : $21.21

SI5348A-E10931-GMR

Skyworks Solutions Inc

Network Synchronizer for SyncE/ 1588 PTP Telecom B
RoHS : Compliant

095-820-109-30H

Amphenol Corporation

RF Cable Assembly AMC Right Angle Plug to FAKRA IP
RoHS : Compliant

1 : $23.27
250 : $21.18
500 : $19.26
10,009 : $18.67

Avnet Silica

CA10930_BOOM-M

LEDIL

Boom Reflector For Acriche AX3221 And P7 LEDs (Alt: CA10930_BOOM-M)
RoHS : Compliant

UPC1093T-E1-AZ

Renesas Electronics Corporation

(Alt: UPC1093T-E1-AZ)
RoHS : Compliant

CA10931_BOOM-W

LEDIL

Boom Reflector For Acriche Ax3221 And P7 LEDs (Alt: CA10931_BOOM-W)
RoHS : Compliant

CA10932_FLARE-B

LEDIL

Rectangle Lens Assembly For Oslon Square EC LED (Alt: CA10932_FLARE-B)
RoHS : Compliant

LC26GTAAMDQ1-C1093

Quectel Wireless Solutions Co Ltd

Compact GNSS Module (Alt: LC26GTAAMDQ1-C1093)
RoHS : Compliant

DTR0000410933 (ALS)

Sanmina Corporation

(Alt: DTR0000410933)
RoHS : Not Compliant

Braemac Americas-Symmetry

AA.109.301111

Taoglas Antenna Solutions

AA.109 Magnetic Mount GPS/Galileo 1 Stage LNA, 3M SMA(M)

1 : $18.23
100 : $17.62
500 : $17.01
1,000 : $16.4

20-101-1093

Digi International Inc

RCM4110
RoHS : Compliant

1 : $72.11

AX7DAF1-1093.0000T

Abracon Corporation

XTAL OSC XO 1.0930GHZ LVDS SMD
RoHS : Compliant

1 : $15.42875

Chip-Germany GmbH

BO10 930 160-000

Hirschmann Electronics GmbH & Co Kg

EBV Elektronik

CA10930_BOOM-M

LEDIL

Boom Reflector For Acriche AX3221 And P7 LEDs (Alt: CA10930_BOOM-M)
RoHS : Compliant

784

CA10931_BOOM-W

LEDIL

Boom Reflector For Acriche Ax3221 And P7 LEDs (Alt: CA10931_BOOM-W)
RoHS : Compliant

448

CA10932_FLARE-B

LEDIL

Rectangle Lens Assembly For Oslon Square EC LED (Alt: CA10932_FLARE-B)
RoHS : Compliant

288

AA.109.301111

Taoglas Antenna Solutions

Active GPSGALILEO Antenna LNA RHCP 157542MHz 5dB (Alt: AA.109.301111)
RoHS : Compliant

VXM9-9008-53M7109370TR

Microchip Technology Inc

(Alt: VXM9-9008-53M7109370TR)
RoHS : Compliant

Maritex

CA10932_FLARE-B

LEDIL

Lens for LED high power; angle: Oval 10 x 108 degrees FWHM; Number of LEDs: 1; Dimensions: 29x23mm; Height: 12.8mm; meterial: PMMA; Fastening: tape; screw

2,592 : $2.036
1,008 : $2.062
576 : $2.54
100 : $2.611
10 : $3.363
1 : $4.594

9,216

Pasternack Enterprises US

PE3W10931-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. QMA Male Right Angle to SMA Male Low Loss Cable 12 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly QMA male right angle to SMA male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The QMA male right angle to SMA male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom QMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle QMA cable connection on one end and a SMA cable connection on the other. Our low loss right angle QMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W10931-12 can also be known as a low loss right angle QMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10931-12 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our right angle QMA male to SMA male cable has a maximum VSWR of 1.4:1. QMA plug to SMA plug cable assembly PE3W10931-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with right angle QMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W10931-12 can also be used in the other direction and will be a SMA male to right angle QMA male cable assembly if the opposite connectivity is required. Low loss QMA right angle plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality QMA to SMA cable assembly for quick shipment worldwide. Variations of QMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal QMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $80.29
25 : $76.28
50 : $72.26
100 : $69.05

100

PE3FCA109-3M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM5, Fiber Diameter: 50/125, Cable Assembly Color: Lime Green, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex LC UPC to LC UPC, MM OM5, 2.0mm Plenum, Lime Green-3M. Pasternack’s PE3FCA109-3M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long patch cable assembly is equipped with simplex LC/UPC to LC/UPC connectors. Our lime green fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA109-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM5 multimode fiber optic cable that meets your requirements.

1 : $27.49
5 : $26.39
10 : $25.29
25 : $24.19

PEWCP1093S-50

Pasternack Enterprises

Key Specifications, Waveguide Size : WR-112, Flange Size: None Flange, Flange Type : UG-51/U Flange, Flange Group : Standard, Minimum Frequency: 6.57 GHz, Maximum Frequency: 9.99 GHz, Impedance : 50 Ohms, Maximum VSWR: 1.25:1, Maximum Insertion Loss: 0.1 dB, Coupling: 50 dB. WR-112 Waveguide 50 dB Dual Directional Crossguide Coupler, UG-51/U, SMA Female Coupling Ports, 6.57 GHz to 9.99 GHz, Brass., Pasternack’s PEWCP1093S-50 is a WR-112 dual directional dual crossguide coupler with a 50 Ohm impedance. This dual directional waveguide coupler has a SMA connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 6.57 GHz and 9.99 GHz. This waveguide dual crossguide coupler has a coupling value of 50 dB. This 50 dB waveguide coupler has a brass copper body with passivated stainless steel plating. Our WR-112 dual directional waveguide coupler is rated for a maximum input power (CW) of 800 Watts. This 9.99 GHz waveguide coupler has a 1.1:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this WR-112 waveguide coupler are on our downloadable PDF datasheet above. The PEWCP1093S-50 dual crossguide waveguide coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our waveguide coupler has a maximum insertion loss of 0.1 dB. This waveguide coupler has a UG-51/U flange, which is made up of brass copper material with a passivated stainless steel plating. The waveguide coupler with a UG-51/U flange has a minimum coupler directivity of 18 dB. This WR-112 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same-business-day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal dual directional dual crossguide coupler for your requirement.

1 : $2,590.0
5 : $2,538.2
10 : $2,486.4
25 : $2,434.6

PE3C1093LF-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to MMCX Plug Right Angle Low Loss Cable 24 Inch Length Using LMR-100 Coax, LF Solder., Radio frequency assembly N male to MMCX plug right angle low loss cable 24 inch length using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to MMCX plug right angle low loss cable 24 inch length using LMR-100 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle MMCX cable connection on the other. Our low loss type N to right angle MMCX cable assembly has a male gender on end 1 and a plug on end 2. PE3C1093LF-24 can also be known as a low loss type N plug to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1093LF-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our type N male to right angle MMCX plug cable has a maximum VSWR of 1.4:1. Type N plug to MMCX male cable assembly PE3C1093LF-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle MMCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1093LF-24 can also be used in the other direction and will be a right angle MMCX plug to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to MMCX cable assembly for quick shipment worldwide. Variations of type N and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $81.39
25 : $77.32
50 : $73.25
100 : $70.0

PE3C1093LF-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. N Male to MMCX Plug Right Angle Low Loss Cable 200 CM Length Using LMR-100 Coax, LF Solder., Radio frequency assembly N male to MMCX plug right angle low loss cable 200 cm length using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to MMCX plug right angle low loss cable 200 cm length using LMR-100 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle MMCX cable connection on the other. Our low loss type N to right angle MMCX cable assembly has a male gender on end 1 and a plug on end 2. PE3C1093LF-200CM can also be known as a low loss type N plug to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1093LF-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our type N male to right angle MMCX plug cable has a maximum VSWR of 1.4:1. Type N plug to MMCX male cable assembly PE3C1093LF-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle MMCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1093LF-200CM can also be used in the other direction and will be a right angle MMCX plug to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to MMCX cable assembly for quick shipment worldwide. Variations of type N and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $86.69
25 : $82.36
50 : $78.02
100 : $74.55

PE3W10937

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm.

PE3W10932LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Female Cable Using LMR-100 Coax with HeatShrink, LF Solder. PE3W10932LF/HS is a TNC male right angle to TNC female cable using LMR-100A coax. This Pasternack TNC male right angle to TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10932LF/HS TNC male right angle to TNC female cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W10936

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Push-On SMP Female Right Angle to QMA Male Cable Using RG316 Coax., Radio frequency assembly push-on SMP female right angle to QMA male cable using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The push-on SMP female right angle to QMA male cable using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMP cable connection on one end and a QMA cable connection on the other. Our right angle SMP to QMA cable assembly has a female gender on end 1 and a male on end 2. PE3W10936 can also be known as a right angle SMP jack to QMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W10936 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our right angle SMP female to QMA male cable has a maximum VSWR of 1.5:1. SMP jack to QMA plug cable assembly PE3W10936 is built with RG316 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to QMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10936 can also be used in the other direction and will be a QMA male to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to QMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to QMA cable assembly for quick shipment worldwide. Variations of SMP and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to QMA RF cable assembly as per your requirements.

PE3W10939

Pasternack Enterprises

Key Specifications, Connector Series 1: SC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm.

PE3W10935

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm.

PE3C1093

Pasternack Enterprises

PE3C0109-36

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to TNC Male With Times Connectors Cable 36 Inch Length Using LMR-400 Coax., Radio frequency assembly N male to TNC male with times connectors cable 36 inch length using LMR-400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to TNC male with times connectors cable 36 inch length using LMR-400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a male gender on end 1 and male on end 2. This N type to TNC cable is a male to male coax assembly, PE3C0109-36, can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C0109-36 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0109-36 can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Low loss N type plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male with times connectors cable 36 inch length using LMR-400 coax.

1 : $158.99
25 : $151.04
50 : $143.09
100 : $136.73

PE3W10933

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to TNC Female Bulkhead Cable Using LMR-195 Coax. PE3W10933 is a reverse polarity TNC male to TNC female bulkhead cable using LMR-195 coax. This Pasternack reverse polarity TNC male to TNC female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our reverse polarity male TNC to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10933 TNC reverse polarity male to TNC female bulkhead cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C1093LF

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. N Male to MMCX Plug Right Angle Low Loss Cable Using LMR-100 Coax, LF Solder., Radio frequency assembly N male to MMCX plug right angle low loss cable using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to MMCX plug right angle low loss cable using LMR-100 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle MMCX cable connection on the other. Our low loss type N to right angle MMCX cable assembly has a male gender on end 1 and a plug on end 2. PE3C1093LF can also be known as a low loss type N plug to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1093LF RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our type N male to right angle MMCX plug cable has a maximum VSWR of 1.4:1. Type N plug to MMCX male cable assembly PE3C1093LF is built with LMR-100A which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle MMCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1093LF can also be used in the other direction and will be a right angle MMCX plug to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to MMCX cable assembly for quick shipment worldwide. Variations of type N and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

PE3C10939

Pasternack Enterprises

TE Connectivity

1-2273109-3

TE Connectivity

M8 strgt plug to M12 strgt socket AA Cable Assembly Type: M8 to M12 Number of Positions: 4 Cable Assembly Length: 1 m Cable Assembly Length: 3.2 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 4 1 m 3.2 ft | M8 Ms - M12 Fs Cable Assy Bl | Part Number: 1-2273109-3 | Internal Number: 1-2273109-3 | TE Connectivity
RoHS : Compliant

100 : $32.32
50 : $33.86
25 : $35.4
10 : $36.94
1 : $38.48

2273109-3

TE Connectivity

M8 strgt plug to M12 strgt socket AA Cable Assembly Type: M8 to M12 Number of Positions: 4 Cable Assembly Length: 1 m Cable Assembly Length: 3.2 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 4 1 m 3.2 ft | M8 Ms - M12 Fs Cable Assy Bl | Part Number: 2273109-3 | Internal Number: 2273109-3 | TE Connectivity
RoHS : Compliant

100 : $34.64
50 : $36.29
25 : $37.93
10 : $39.58
1 : $41.23