| Electronic Components Datasheet Search |
|
1106-2J-AF5-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Bisco Industries | 1106367 | Unbrako Group | 5,000 | |||
| 01-10-60 | All Electronics Hardware Inc | 1,200 | ||||
| 1106331 | Unbrako Group | 600 | ||||
| 1106497 | Unbrako Group | 200 | ||||
| 09-9001-1-06 | Staffall | 121 | ||||
| M39024/11-06 | Staffall | 94 | ||||
| M39024/11-06 | MIL-SPEC Miscellaneous | 94 | ||||
| 1106-05-04419 | Staffall | 46 | ||||
| 2110-632-S-12 | RAF Electronic Hardware | 43 | ||||
| M39024/11-06 | NEW SURPLUS CELL 2 | 20 | ||||
| MF-01-110-60 | Southco | 10 | ||||
| 37-11-061-10 | Southco | 9 | ||||
| NAS1106-40 | NAS Bolts | 4 | ||||
| NAS1106-34 | NAS Bolts | 3 | ||||
| 09-9081-1-06 | Staffall | 3 | ||||
![]() Rochester Electronics | NCP81106MNTXG | onsemi | NCP81106 - VR CONTROLLER WITH 12V DRIVERS RoHS : Compliant |
| 60,000 | |
| MAX11060GUU+ | Analog Devices Inc | IC ADC 4 CONV 16Bits Sigma-Delta 4-Wire Serial, DSP, MICROWIRE, QSPI, SPI 38-SOP Tube RoHS : Compliant |
| 2 | ||
| MAX1106EUB+T | Analog Devices Inc | ADC, Successive Approximation, 8-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO10 RoHS : Compliant |
| 15,000 | ||
| MAX1106CUB+T | Analog Devices Inc | MAX1106 - Single-Supply, Low-Power, Serial 8-Bit ADCs RoHS : Compliant |
| 15,000 | ||
TUSB1106RGTR![]() | Texas Instruments | IC INTERFACE Transceiver USB 2.0 12Mbps 3V, 4V - 3.6V, 5.5V 16-QFN T/R RoHS : Compliant |
| 20,580 | ||
TUSB1106PWR![]() | Texas Instruments | IC INTERFACE Transceiver USB 2.0 12Mbps 3V, 4V - 3.6V, 5.5V 16-SOP T/R RoHS : Compliant |
| 34,033 | ||
TPS61106PW![]() | Texas Instruments | Switching Regulator, Current-mode, 1.8A, 800kHz Switching Freq-Max, PDSO20 RoHS : Compliant |
| 17,776 | ||
TLV320AIC1106PWG4![]() | Texas Instruments | IC PCM PCM Audio Interface 8Bits, 13Bits 2.7V - 3.3V 2.7V - 3.3V 20-SOP Tube RoHS : Compliant |
| 20 | ||
TUSB1106IPWRQ1![]() | Texas Instruments | IC ADC 1 CONV 10Bits SAR 4-Wire Serial, MICROWIRE, QSPI, SPI 20-SOP T/R RoHS : Compliant |
| 8,000 | ||
CDC421106RGET![]() | Texas Instruments | Clock Generator, 106.25MHz, PQCC24 RoHS : Compliant |
| 2,750 | ||
| HI1106JCP | Harris Semiconductor | D/A Converter, 1 Func, Parallel, 8 Bits Input Loading, PDIP24 RoHS : Not Compliant |
| 1,217 | ||
| JM38510/11106BCA | Harris Semiconductor | SPDT, 1 Func, 1 Channel, JFET, CDIP14 RoHS : Not Compliant |
| 1,120 | ||
| JM38510/11106BDC | Harris Semiconductor | SPDT HIGH-SPEED DRIVER WITH JFET Switch RoHS : Not Compliant |
| 126 | ||
MAX1106CUB![]() | Maxim Integrated Products | MAX1106 Single-Supply, Low-Power, Serial 8-Bit ADC RoHS : Not Compliant |
| 42 | ||
MAX1106EUB+T![]() | Maxim Integrated Products | ADC, Successive Approximation, 8-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO10 RoHS : Compliant |
| 2,401 | ||
![]() ComSIT USA | 15311066 | Molex | AVAILABLE EU RoHS : Compliant | 15 | ||
| MLX81106KDCCAA021RE | Melexis Microelectronic Integrated Systems | AVAILABLE EU | 170,276 | |||
| FRX11060F | Unictron Technologies Corp | AVAILABLE EU | 333 | |||
![]() NexGen Digital | CDCLVC1106PWR![]() | Texas Instruments | RoHS : Compliant | 1,877 | ||
| M1106030D3929CP500 | Vishay Dale | 359 | ||||
| MA4E2054E1-1068T | MACOM | RoHS : Compliant | 20 | |||
![]() PEI Genesis | DM51106-5016 | ITT Interconnect Solutions |
| 0 | ||
| IPUN-AA-H1106-3N-N | Sure Seal Connections |
| 0 | |||
| KJ110698-127 | ITT Interconnect Solutions |
| 0 | |||
| SB01B6A1106X2 | SOURIAU-SUNBANK |
| 0 | |||
| 2053AS011-06 | SOURIAU-SUNBANK |
| 0 | |||
| 06F5001R1106PN-138 | SOURIAU-SUNBANK |
| 0 | |||
| 1106-2GW24 | HellermannTyton |
| 0 | |||
| SB01B6E1106W1 | SOURIAU-SUNBANK |
| 0 | |||
| 06F5001A1106P-114 | SOURIAU-SUNBANK |
| 0 | |||
| 06F5001S1106N3 | SOURIAU-SUNBANK |
| 0 | |||
| 06F5009S1106CN3-6 | SOURIAU-SUNBANK |
| 0 | |||
| 24F5002RE1106P | SOURIAU-SUNBANK |
| 0 | |||
| S5053FM1106SF34-4 | SOURIAU-SUNBANK |
| 0 | |||
| SB01B1E1106X2 | SOURIAU-SUNBANK |
| 0 | |||
| SB02B6A1106X2 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 2316110-6 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 6,213 | |
| PTS06USB1-10-6P | Amphenol Corporation | CONNECTOR |
| 240 | ||
| MTMM-111-06-T-D-200 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 225 | ||
| 9911-062 | Bivar Inc | Nylon Tubular, 0.062 in. Length, 0.250 O RoHS : Compliant |
| 185 | ||
| 1106430-1 | TE Connectivity | Unspecified Connectors RoHS : Compliant |
| 69 | ||
| RFB-1106-C-03 | RF Industries | BNC M CRIMP WITH BECU CONTACT CABLE C; N |
| 64 | ||
| ESW-110-69-S-D | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 52 | ||
| ESQ-110-69-S-T | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 43 | ||
| 1106456-3 | TE Connectivity | Unspecified Connectors RoHS : Compliant |
| 38 | ||
| 1106439-2 | TE Connectivity | Unspecified Connectors RoHS : Compliant |
| 30 | ||
| 1106473-4 | TE Connectivity | Unspecified Connectors RoHS : Compliant |
| 23 | ||
| 1-1106433-0 | TE Connectivity | Connectors RoHS : Compliant |
| 10 | ||
| 1106434-7 | TE Connectivity | Connectors RoHS : Compliant |
| 7 | ||
| M1106-074-0214 | Amphenol Corporation | Connector |
| 5 | ||
| 1106451-8 | TE Connectivity | Unspecified Connectors RoHS : Compliant |
| 4 | ||
![]() Rutronik | CR21-106-JL | ASJ Holdings Limited | RC0805 10M 5% 0,125W TK100 RoHS : Compliant |
| 15,000 | |
2920L110/60MR![]() | Littelfuse Inc | Resettable Fuse 0.75A 60V 2920 RoHS : Compliant |
| 13,000 | ||
| RW-1106-NS RT | C&K Switches | SMD 10 pos. 6x7mm RoHS : Compliant |
| 10 | ||
| 2014441106 | Molex | 06P Nano-Fit HOUSING BLAC RoHS : Compliant |
| 10 | ||
| RV1106G EVB | Rockchip Electronics Co Ltd | RV1106 EVAL Board RoHS : Compliant |
| 1 | ||
![]() Avnet Silica | USC1106 | Semtech Corporation | D MET 1A SFST 400V (Alt: USC1106) RoHS : Compliant | 0 | ||
| UES1106 | Microchip Technology Inc | (Alt: UES1106) RoHS : Not Compliant | 0 | |||
| UES1106SM | Microchip Technology Inc | Rectifier Diode 400V 2A 2Pin Surface Mount Melf (Alt: UES1106SM) RoHS : Not Compliant | 0 | |||
| UES1106HR2 | Microchip Technology Inc | (Alt: UES1106HR2) RoHS : Not Compliant | 0 | |||
| OM11064,598 | NXP Semiconductors | PTN3460 eDP to LVDS Bridge IC Demonstration Board (Alt: OM11064,598) RoHS : Not Compliant | 0 | |||
| SP121106CTG | NXP Semiconductors | MOTSP121106CTG (Alt: SP121106CTG) RoHS : Compliant | 0 | |||
| SI311106265 | 2J USA | Antennas (Alt: SI311106265) RoHS : Compliant | 0 | |||
| NB3V1106CDTR2G | onsemi | Low Skew Fanout Buffer 16 LVCMOS 33V25V18V (Alt: NB3V1106CDTR2G) RoHS : Compliant | 0 | |||
| CAP1106-1-AIA-TR | Microchip Technology Inc | Sensor Controller Capacitive 6CH I2CSMBUS 10Pin DFN EP TR (Alt: CAP1106-1-AIA-TR) RoHS : Compliant | 0 | |||
| SMJD-3611060B-XXN1 00C13F038ALL | Seoul Semiconductor | HIGH EFFICIENCY LINEAR MODULE 109W CCT 3000K CRI80 LUMEN 2130 3 STEP (Alt: SMJD-3611060B-XXN100C13F038ALL) RoHS : Compliant | 0 | |||
| SMJD-3611060B-XXN1 00C21E038ALL | Seoul Semiconductor | HIGH EFFICIENCY LINEAR MODULE 109W CCT 4000K CRI80 LUMEN 2210 3 STEP (Alt: SMJD-3611060B-XXN100C21E038ALL) RoHS : Compliant | 0 | |||
| SMJD-3611060B-XXN1 00C21C038ALL | Seoul Semiconductor | HIGH EFFICIENCY LINEAR MODULE 109W CCT 5000K CRI80 LUMEN 2210 3 STEP (Alt: SMJD-3611060B-XXN100C21C038ALL) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | ATL-1Z110611SR09LT | Abracon Corporation | RoHS : Compliant |
| 0 | |
| ATL-1Z110611SR08LT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ATL-1Z110611SR20LT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ATL-1Z110611SR07LT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ATL-1Z110611SR12LT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ATL-1Z110611SR15LT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ATL-1Z110611SR10LT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AX7DAF1-106.2500T![]() | Abracon Corporation | XTAL OSC XO 106.2500MHZ LVDS SMD RoHS : Compliant |
| 0 | ||
| ATL-1Z110611SR17LT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() DB Roberts | PK-11-06 | Southco | 0 | |||
| 8110690008VR | Essentra Components | 0 | ||||
| E3-1211-0659 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 37-11-061-10 | Southco | 0 | ||||
| 1110680000VR | Essentra Components | 0 | ||||
| 111069 | Essentra Components | 0 | ||||
| 2110-632-S-12 | RAF Electronic Hardware | 0 | ||||
| MF-01-110-60 | Southco | Simple styling and numerous installation options make these latches extremely practical for a wide variety of entry-door applications. A series of attractive design and finish options provide appropriate accents. | 0 | |||
| E3-1015-1106 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-106-1106 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 1110640000VR | Essentra Components | 0 | ||||
| E3-123-1106 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E5-2-011-061 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| RS-2511-0687 | Heyco | RS 0250 OD X115 ID X687 LG NAT | 0 | |||
| RS-3111-0625 | Heyco | RS 0312 OD X115 ID X625 LG NAT | 0 | |||
![]() EBV Elektronik | HCPL-2611#060![]() | Broadcom Limited | (Alt: HCPL-2611#060) RoHS : Not Compliant | 2,300 | ||
| HCPL-2611-060E | Broadcom Limited | (Alt: HCPL-2611-060E) RoHS : Compliant | 300 | |||
| TCLT1106 | Vishay Intertechnologies | (Alt: TCLT1106) RoHS : Compliant | 0 | |||
| TCET1106 | Vishay Intertechnologies | (Alt: TCET1106) RoHS : Compliant | 0 | |||
| TCET1106G | Vishay Intertechnologies | (Alt: TCET1106G) RoHS : Compliant | 0 | |||
| UES1106SM | Microchip Technology Inc | Rectifier Diode 400V 2A 2Pin Surface Mount Melf (Alt: UES1106SM) RoHS : Not Compliant | 0 | |||
| TCD1106GFG | Toshiba America Electronic Components | CCD Image Sensor (Alt: TCD1106GFG) RoHS : Compliant | 0 | |||
| UES1106SM/TR | Microchip Technology Inc | Rectifier Diode 400V 2A 2Pin Surface Mount Melf (Alt: UES1106SM/TR) RoHS : Compliant | 0 | |||
| RN1106,LF(CT | Toshiba America Electronic Components | Bipolar PreBiased Digital Transistor NPN 50 V 100 mA 47 kohm 47 kohm (Alt: RN1106,LF(CT) RoHS : Compliant | 0 | |||
| HSSR-7110#600 | Broadcom Limited | (Alt: HSSR-7110#600) RoHS : Compliant | 0 | |||
HCPL-2211#060![]() | Broadcom Limited | Optocoupler LogicOut TotemPole DCIN 1CH 8Pin PDIP Tube (Alt: HCPL-2211#060) RoHS : Not Compliant | 0 | |||
| HCPL-0611-060E | Broadcom Limited | (Alt: HCPL-0611-060E) RoHS : Compliant | 0 | |||
| HCPL-2211-060E | Broadcom Limited | Optocoupler LogicOut TotemPole DCIN 1CH 8Pin PDIP Tube (Alt: HCPL-2211-060E) RoHS : Compliant | 0 | |||
| CAP1106-1-AIA-TR | Microchip Technology Inc | Sensor Controller Capacitive 6CH I2CSMBUS 10Pin DFN EP TR (Alt: CAP1106-1-AIA-TR) RoHS : Compliant | 0 | |||
| CM8071504821106S RMBF | Intel Corporation | Processor Intel Core i513400 CISC 64Bit 46GHz 1700Pin FCLGA Tray (Alt: 99C502) RoHS : Compliant | 0 | |||
![]() ECCO | 0110627000 | ITT Interconnect Solutions |
| 1,714 | ||
| 011-0627-000 | ITT Interconnect Solutions |
| 1,714 | |||
| 0110629000 | ITT Interconnect Solutions |
| 1,551 | |||
| 0110620000 | ITT Interconnect Solutions |
| 1,396 | |||
| 011-0622-000 | ITT Interconnect Solutions |
| 922 | |||
| 0110622000 | ITT Interconnect Solutions |
| 922 | |||
| 011-0623-000 | ITT Interconnect Solutions |
| 842 | |||
| 0110626000 | ITT Interconnect Solutions |
| 359 | |||
| 011-0626-000 | ITT Interconnect Solutions |
| 359 | |||
| 0110630000 | ITT Interconnect Solutions |
| 310 | |||
| 011-0624-000 | ITT Interconnect Solutions |
| 293 | |||
| 0110624000 | ITT Interconnect Solutions |
| 293 | |||
| 011-0631-000 | ITT Interconnect Solutions |
| 243 | |||
| 0110604000 | ITT Interconnect Solutions |
| 152 | |||
| 0110632000 | ITT Interconnect Solutions |
| 5 | |||
![]() Neutron USA | 10-1106.1369 | EAO AG | Lamp, Incandescent, Filament, T5.5, 200mA, 6VAC/DC RoHS : Compliant |
| 50 | |
| 1110616 | Phoenix Contact | Pluggable Terminal Blocks LPC 2,5/18-ST-5,08-LR RoHS : Compliant |
| 50 | ||
| 102110607 | Seeed Development Ltd | Development Boards & Kits - ARM Wio Lite AI Single Board: Powerful AI vision development board based on the STM32H725AE chip |
| 50 | ||
| 1110608 | Phoenix Contact | Pluggable Terminal Blocks LPC 2,5/10-ST-5,08-LR RoHS : Compliant |
| 39 | ||
| 1110615 | Phoenix Contact | Pluggable Terminal Blocks LPC 2,5/17-ST-5,08-LR RoHS : Compliant |
| 31 | ||
| 7000-11061-0360500 | Murrelektronik GmbH | Sensor Cables / Actuator Cables MSUD VALVE PLUG FORM BI 11MM, PUR 3X0.75 YELLOW, UL/CSA, drag ch 5m RoHS : Compliant |
| 30 | ||
| 09A30-01-1-06N | Grayhill Inc | Rotary Switch, 6pos, 1deck, 1pole/deck, SP6T, Non-Shorting, 30° throw, Solder Lug RoHS : Compliant |
| 16 | ||
PXM7011/06S/ST/0507/SN![]() | Bulgin | Standard Circular Connector Metal In-Line 6pos FML screw w/screen RoHS : Compliant |
| 15 | ||
| 09M30-01-1-06N | Grayhill Inc | Switch Rotary SP6T 6 Flatted Shaft Solder Lug 0.25A 115VAC 28VDC Automotive RoHS : Compliant |
| 9 | ||
| 44S30-01-1-06N | Grayhill Inc | Rotary Switches 44S30-01-1-06N RoHS : Compliant |
| 6 | ||
| 50S60-01-1-06N | Grayhill Inc | ROTARY SWITCH RoHS : Compliant |
| 5 | ||
| 1110618 | Phoenix Contact | Pluggable Terminal Blocks LPC 2,5/20-ST-5,08-LR RoHS : Compliant |
| 0 | ||
| 44M60-01-1-06N | Grayhill Inc | Rotary Switches 44M60-01-1-06N-C RoHS : Compliant |
| 0 | ||
| 102110646 | BeagleBoard | Single Board Computers BeagleBone AI-64 |
| 0 | ||
| 1110614 | Phoenix Contact | Pluggable Terminal Blocks LPC 2,5/16-ST-5,08-LR RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PEWCP1106N-30 | Pasternack Enterprises | Key Specifications, Waveguide Size : WR-430, Flange Size: None Flange, Flange Type : CPR-430F Flange, Flange Group : Standard, Minimum Frequency: 1.72 GHz, Maximum Frequency: 2.61 GHz, Maximum VSWR: 1.4:1, Maximum Insertion Loss: 0.2 dB, Coupling: 30 dB. WR-430 Waveguide 30 dB Loop Coupler, CPR430F Flange, N Female Coupled Port, 1.72 GHz to 2.61 GHz, Aluminum. Pasternack’s PEWCP1106N-30 is a WR-430 directional loop coupler. This directional waveguide coupler has type N connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 1.72 GHz and 2.61 GHz. The PEWCP1106N-30 WR-430 waveguide coupler is a great option for test benches, radar, satellite, microwave radio, attenuation measurements, power measurements and source leveling applications. This waveguide loop coupler has a coupling accuracy of 30 dB. This 30 dB waveguide coupler has an aluminum body with chromate conversion plating. Our WR-430 directional waveguide coupler is rated for a maximum input power (CW) of 4,000 Watts. This 2.61 GHz waveguide coupler has a 1.1:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this WR-430 waveguide coupler are on our downloadable PDF datasheet above. This directional waveguide coupler has 2,000,000 Watts of peak power along with a directivity of 15 dB. The PEWCP1106N-30 loop coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our 4,000 Watts (CW) waveguide coupler has a maximum insertion loss of 0.2 dB. This waveguide coupler has a CPR-430F flange which is made up of aluminum material with chromate conversion plating. The waveguide coupler with a CPR-430F flange has a minimum coupler directivity of 15 dB. This WR-430 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal directional loop coupler for your requirement. |
| 3 | |
| PE70MP1106 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Female to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1106 from Pasternack has type N connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial N type to type F impedance matching pad has a female type N in and a female F type out. Our 50 Ohm type N to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N female to 75 Ohm type F female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm N type to 75 Ohm type F matching pad is brass. 50 Ohm type N female to 75 Ohm F type female RF impedance pad PE70MP1106 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 3 | ||
| PE3W11062/HS | Pasternack Enterprises | 0 | ||||
| PE3W11068/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Male Right Angle Cable Using LMR-200-FR Coax with HeatShrink. PE3W11068/HS is a TNC male right angle to TNC male right angle cable using LMR-200-FR coax. This Pasternack TNC male right angle to TNC male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11068/HS TNC male right angle to TNC male right angle cable assembly is constructed with LMR-200-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3CA1106-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Trimmed Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR047TN, RF Cable Type: Tinned 047, RF Cable Impedance: 50 Ohm, Length: 6 inches. Pigtail Test Probe Cable SMA Female to Pre-Trimmed Lead 6 Inch Length Using PE-SR047TN Coax, RoHS., Radio frequency assembly pigtail test probe cable SMA female to pre-trimmed lead 6 inch length using PE-SR047TN coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Pigtail test probe cable SMA female to pre-trimmed lead 6 inch length using PE-SR047TN coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to trimmed lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and trimmed lead cable connection on the other. Our SMA to trimmed lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to trimmed lead cable is a female to sexless coax assembly, PE3CA1106-6, can also be known as a SMA jack to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to trimmed lead sexless cable assembly PE3CA1106-6 is built with tinned 047 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA female to trimmed lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1106-6 can also be used in the other direction and will be trimmed lead sexless to SMA female cable assembly if the opposite connectivity is required. SMA jack to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this pigtail test probe cable SMA female to pre-trimmed lead 6 inch length using PE-SR047TN coax, RoHS. |
| 0 | ||
| PE35110-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Female 4 Hole Flange to SMA Female 4 Hole Flange Cable 60 Inch Length Using PE-SR402FL Coax., Radio frequency assembly SMA female 4 hole flange to SMA female 4 hole flange cable 60 inch length using PE-SR402FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 4 hole flange to SMA female 4 hole flange cable 60 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and SMA 4 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE35110-60, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE35110-60 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 4 hole flange to SMA female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 4 hole flange to SMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to SMA female 4 hole flange cable 60 inch length using PE-SR402FL coax. |
| 0 | ||
| PE3C11063 | Pasternack Enterprises | 0 | ||||
| PE3W11069LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W01106 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50. Bordeaux FAKRA Jack to TNC Female Cable Using LMR-100 Coax. PE3W01106 is a FAKRA jack to TNC female cable using LMR-100A coax. This Pasternack FAKRA jack to TNC female cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm TNC for connector 2. Our jack FAKRA to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01106 FAKRA jack to TNC female cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PEANOM1106 | Pasternack Enterprises | Key Specifications. Antenna Type Mobile Polarization Vertical Connector 1 Polarity Standard Connector Series SMA Connector Gender Male Impedance 50 Ohm. 4 Cellular, 4 Wi-Fi, 1 GPS Combination Antenna4 SMA, 4 RP SMA, 1 SMA Connector Black. The Pasternack PEANOM1106 is a 9-in-1 combination antenna designed for public safety, emergency services, mobile basestations, autonomous vehicles, fleet management, smart cities, smart utilities, or industrial IoT applications. This verticallypolarized omnidirectional antenna has SMA male and RPSMA male connectors with 17 feet cable leads. Our high-qualitymobile antenna with 9 ports has a typical input VSWR of 2:1. The IoT combination antenna from Pasternack has an overall length of 7 inches, width of 7 inches, and weight of 4 lbs. ThisPEANOM1106 mobile antenna is IP69K-rated and has a black-colored radome made of UV-stabilized ABS. The 4 cellular, 4Wi-Fi, 1 GPS combination antenna has an impedance of 50 Ohms and a maximum input power of 10 Watts. Our vertically polarized mobile antenna can operate at temperatures ranging from -40 to 70 degrees C. This MIMO-capableIoT antenna features four 4G/5G, four 2.4/5 GHz, and one L1/G1 GPS band elements in one radome. Emergency services,first responders, and fleets can rely on our 9-in-1 combination antenna to maintain a secure link between vehicles anddispatch centers. |
| 0 | ||
| PE3C11067/HS | Pasternack Enterprises | 0 | ||||
| PE3C11069 | Pasternack Enterprises | 0 | ||||
| PE3W11062LF | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm MCX Jack to 75 Ohm F Male Cable Using 75 Ohm RG179 Coax, LF Solder. PE3W11062LF is a MCX jack to F male cable using RG179 coax. This Pasternack MCX jack to F male cable assembly uses a 75 Ohm MCX for connector 1 and a 75 Ohm F for connector 2. Our jack MCX to male F cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W11062LF MCX jack to F male cable assembly is constructed with RG179 coax. | 0 | |||
| PE3W11066 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C11063/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: NMO Mount, Connector Gender 1: Sexless, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. NMO Mount Sexless to Mini UHF Male Cable Using LMR-195-UF Coax with HeatShrink. PE3C11063/HS is a NMO Mount sexless to Mini UHF male cable using LMR-195-UF coax. This Pasternack NMO Mount sexless to Mini UHF male cable assembly uses a 50 Ohm NMO Mount for connector 1 and a 50 Ohm Mini UHF for connector 2. Our sexless NMO Mount to male Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C11063/HS NMO Mount sexless to Mini UHF male cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() TE Connectivity | 1-106505-2 | TE Connectivity | 9P.HDP20 REC.ASSY. Number of Positions: 9 Connector & Housing Type: Receptacle Connector System: Cable-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Receptacle Cable-to-Board Board Mount | Part Number: 1-106505-2 | Internal Number: 1-106505-2 | TE Connectivity RoHS : Compliant |
| 579 | |
| V23101D1106B201 | TE Connectivity | V23101D1106B201(stronger packaging) Relay & Contactor Type: Reed Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 1 Form C SPDT-CO Contact Current Rating: 1.25 A Reed Relay DC Monostable 1 Form C SPDT-CO | Electromechanical Relay | Part Number: V23101D1106B201 | Internal Number: 4-1393779-4 | TE Connectivity RoHS : Compliant |
| 543 | ||
| T2111063201-007 | TE Connectivity | HMN-006-PF Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 6 Wire Size: 26 – 12 AWG Wire Size: .14 – 4 mm² Socket Insert for Contacts 6 26 – 12 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111063201-007 | Internal Number: T2111063201-007 | TE Connectivity RoHS : Compliant |
| 185 | ||
| T2111062101-007 | TE Connectivity | HMN-006-M Contact Type: Pin Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 6 Wire Size: 26 – 12 AWG Wire Size: .14 – 4 mm² Pin Insert for Contacts 6 26 – 12 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111062101-007 | Internal Number: T2111062101-007 | TE Connectivity RoHS : Compliant |
| 80 | ||
| TLSZLS1106PR | TE Connectivity | LS Z SLOW OFFSET ROLLER V2 4A 1NO + 1NC Push Button Switch Product Type: Limit Switch Illuminated: Without Operating Function: 1 NO & 1 NC Configuration (Pole-Throw): Single Pole - Single Throw Number of Actuators: Single Limit Switch Without 1 & 1 NC Single Pole - Single Throw | Alcoswitch Limit Switch | Part Number: TLSZLS1106PR | Internal Number: 2483581-8 | TE Connectivity RoHS : Compliant |
| 72 | ||
| TLSZNS1106PR | TE Connectivity | LS Z SNAP OFFSET ROLLER V2 4A 1NO + 1NC Push Button Switch Product Type: Limit Switch Illuminated: Without Operating Function: 1 NO & 1 NC Configuration (Pole-Throw): Single Pole - Single Throw Number of Actuators: Single Limit Switch Without 1 & 1 NC Single Pole - Single Throw | Alcoswitch Limit Switch | Part Number: TLSZNS1106PR | Internal Number: 2-2483581-3 | TE Connectivity RoHS : Compliant |
| 58 | ||
| T2111063101-007 | TE Connectivity | HMN-006-PM Contact Type: Pin Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 6 Wire Size: 26 – 12 AWG Wire Size: .14 – 4 mm² Pin Insert for Contacts 6 26 – 12 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111063101-007 | Internal Number: T2111063101-007 | TE Connectivity RoHS : Compliant |
| 50 | ||
| TAA754A1611-060 | TE Connectivity | M12A5-FR-PVC-6.0M Cable Assembly Type: M12 Pigtail Number of Positions: 5 Cable Assembly Length: 6 m Cable Assembly Length: 19.6 ft M8/M12 Application Type: Industrial Fieldbus M12 Pigtail 5 6 m 19.6 ft | Fieldbus & Devicenet M12 A-Code 5P Pvc | Part Number: TAA754A1611-060 | Internal Number: TAA754A1611-060 | TE Connectivity RoHS : Compliant |
| 45 | ||
| T2040011060-000 | TE Connectivity | DMM-6.0 Contact Mating Area Plating Material: Gold (Au) Contact Type: Pin Wire Contact Termination Area Plating Material: Gold Wire Size: 18 – 8 AWG Wire Size: 1 – 10 mm² Gold (Au) Pin 18 – 8 AWG | Connector Contact | Part Number: T2040011060-000 | Internal Number: T2040011060-000 | TE Connectivity RoHS : Compliant |
| 44 | ||
| FN2030N1-1-06 | TE Connectivity | FN2030N1-1-06 Current Rating: 1 A Input Termination Type: FASTON Output Termination Type: FASTON Leakage Current (Max) (120VAC, 60Hz): 3.08 mA Leakage Current (Max) (250VAC, 50Hz): 4.91 mA High Performance Single Phase Filters Fn2030 & General Purpose Ac/dc Emc/rfi Filter With High Attenuation Performance | 1 A FASTON 3.08 mA | Part Number: FN2030N1-1-06 | Internal Number: 817055-SF | FN2030N1-1-06 Current Rating: 1 A Input Termination Type: FASTON Output Termination Type: FASTON Leakage Current (Max) (120VAC, 60Hz): 3.08 mA Leakage Current (Max) (250VAC, 50Hz): 4.91 mA High Performance Single Phase Filters Fn2030 & General Purpose Ac/dc Emc/rfi Filter With High Attenuation Performance | 1 A FASTON 3.08 mA | Part# FN2030N1-1-06 RoHS : Compliant |
| 31 | ||
| FN3041-10-61-C21-R65 | TE Connectivity | FN3041-10-61-C21-R65 Current Rating: 10 A Input Termination Type: Ring Terminal Output Termination Type: Ring Terminal Wiring Configuration: DELTA (3 wire + ground) Operating Voltage: 530 VAC 3-Phase Filters & Low Leakage Emc Filter For High Reliability Application | 10 A Ring Terminal DELTA (3 wire + ground) | Part Number: FN3041-10-61-C21-R65 | Internal Number: 823540-SF | FN3041-10-61-C21-R65 Current Rating: 10 A Input Termination Type: Ring Terminal Output Termination Type: Ring Terminal Wiring Configuration: DELTA (3 wire + ground) Operating Voltage: 530 VAC 3-Phase Filters & Low Leakage Emc Filter For High Reliability Application | 10 A Ring Terminal DELTA (3 wire + ground) | Part# FN3041-10-61-C21-R65 RoHS : Compliant |
| 14 | ||
| T2111062201-000 | TE Connectivity | HMN-006-F Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 6 Wire Size: 26 – 12 AWG Wire Size: .14 – 4 mm² Socket Insert for Contacts 6 26 – 12 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111062201-000 | Internal Number: T2111062201-000 | TE Connectivity RoHS : Compliant |
| 14 | ||
| T2111062101-000 | TE Connectivity | HMN-006-M Contact Type: Pin Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 6 Wire Size: 26 – 12 AWG Wire Size: .14 – 4 mm² Pin Insert for Contacts 6 26 – 12 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111062101-000 | Internal Number: T2111062101-000 | TE Connectivity RoHS : Compliant |
| 3 | ||
![]() Waytek, Inc. | 901-106 | Littelfuse Inc | HWB18 Rubber Seal For Mini Power Distribution Module Material Silicone RoHS : Compliant |
| 528 | |
| R3-79-01-1-06 | OptiFuse | MINI ATM Fuse Block 6 Position with Clear Cover Quality Problem - ETA Q3/16 |
| 366 | ||
| 57640 OR 611-064 | Ideal Clamp Products Inc | Standard Stainless Steel Band Hose Clamp #64 Band 1/2" 2-1/2" TO 4" |
| 174 | ||
| 31-106 | Pollak | Pollak 31-106 4-position ignition switch is a keyed vehicle ignition switch for multi-position circuit control. It supports 4-position operation in a panel-mounted format, making it suitable for ignition, accessory, and start circuit switching in mobile equipment. |
| 112 | ||
| 21106-6 | FTZ Industries | FTZ Industries 21106-6 extra heavy-duty heat shrink kit refill is black adhesive-lined tubing with a .400" size for rugged cable, splice, and termination protection. Its thick-wall construction supports strong moisture sealing and abrasion resistance, and this refill pack includes 10 pieces for restocking heat-shrink kits. |
| 41 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |