| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
ComSIT USA | CF14W6805R
| | AVAILABLE EU | | 29,908
 |
CF14W100OHMS5
| | AVAILABLE EU | | 15,803
|
Braemac Americas-Symmetry | CP2114-WM8523EK
| Silicon Laboratories Inc | | | 0
 |
33-3752AJ-14-W
| Calian | TW3752AJ Accutenna Anti-Jam Single-Band GNSS Antenna, N-type female connector, white radome | | 0
|
33-3742AJ-14-W
| Calian | Antennas TW3742AJ Anti-Jam Single-Band GNSS Antenna N-type female connector white radome, 40dB, Timing Antenna | | 0
|
AW-USB-14-W
| Digi International Inc | Digi AnywhereUSB 14 port USB over IP Hub with Multi-host Connections | | 0
|
Component Electronics, Inc | CF-T/R-1/4WS-270RJ
| CC OHM | IN STOCK SHIP TODAY | 1,000 : $0.08
100 : $0.09
1 : $0.12
|
| 10,000
|
RD1/4WP-220K-JT
| Sanyo-Ohm | IN STOCK SHIP TODAY | 1,000 : $0.08
100 : $0.09
1 : $0.12
|
| 10,000
|
RD1/4WP-62R0JT
| Sanyo-Ohm | IN STOCK SHIP TODAY | 1,000 : $0.08
100 : $0.09
1 : $0.12
|
| 5,000
|
RD1/4WP-10R00-JT
| Sanyo-Ohm | IN STOCK SHIP TODAY | 1,000 : $0.08
100 : $0.09
1 : $0.12
|
| 5,000
|
RD1/4WP-62R0JT
| SANYO Semiconductor Co Ltd | IN STOCK SHIP TODAY | 1,000 : $0.08
100 : $0.09
1 : $0.12
|
| 4,718
|
RN1/4W-T1-4R75-1%
| SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY | 1,000 : $0.1
100 : $0.12
1 : $0.15
|
| 4,700
|
RNM1/4W-T1-11K-1%-R
| SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY | | 4,602
|
RD1/4WP-51K-JT
| Sanyo-Ohm | IN STOCK SHIP TODAY | 1,000 : $0.08
100 : $0.09
1 : $0.12
|
| 4,500
|
CFR-1/4W-2K2-5%
| Sanyo-Ohm | IN STOCK SHIP TODAY | 1,000 : $0.08
100 : $0.09
1 : $0.12
|
| 4,050
|
CR-25-T-1/4WJ-393
| | IN STOCK SHIP TODAY | 1,000 : $0.08
100 : $0.09
1 : $0.12
|
| 4,000
|
RD1/4WP-1K00-JT
| Sanyo-Ohm | IN STOCK SHIP TODAY | 1,000 : $0.08
100 : $0.09
1 : $0.12
|
| 3,500
|
RNM1/4W-T1-226R-1%-R
| SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY | | 3,041
|
CR-25-T-1/4WJ-1R0
| | IN STOCK SHIP TODAY | 1,000 : $0.08
100 : $0.09
1 : $0.12
|
| 2,000
|
MF-25T-1/4W-2260F
| | IN STOCK SHIP TODAY | 1,000 : $0.1
100 : $0.12
1 : $0.15
|
| 1,000
|
GXL-14-WHT/ORN
| | IN STOCK SHIP TODAY | | 5
|
EBV Elektronik | HCPL-814-W0AE
| Broadcom Limited | Optocoupler ACIN 1CH Transistor DCOUT 4Pin PDIP Tube (Alt: HCPL-814-W0AE)
RoHS : Compliant | | 20,800
|
ESDA14WY
| STMicroelectronics | PROTECTION (Alt: ESDA14WY)
RoHS : Compliant | | 0
|
HCPL-814-W00E
| Broadcom Limited | Optocoupler ACIN 1CH Transistor DCOUT 4Pin PDIP Tube (Alt: HCPL-814-W00E)
RoHS : Compliant | | 0
|
HCPL-814-W6AE
| Broadcom Limited | Optocoupler ACIN 1CH Transistor DCOUT 4Pin PDIP Tube (Alt: HCPL-814-W6AE)
RoHS : Compliant | | 0
|
HCPL-814-W60E
| Broadcom Limited | Optocoupler ACIN 1CH Transistor DCOUT 4Pin PDIP Tube (Alt: HCPL-814-W60E)
RoHS : Compliant | | 0
|
BGS14WMA9E6327XTSA1
| Infineon Technologies AG | (Alt: SP002203566)
RoHS : Compliant | | 0
|
334-15/T1C1-4WYA/EU
| Everlight Electronics Co Ltd | (Alt: L112002975)
RoHS : Compliant | | 0
|
334-15/T2C1-4WYC/R10/EU
| Everlight Electronics Co Ltd | Low Power LEDs none SSL (Alt: L102000508)
RoHS : Compliant | | 0
|
ECCO | 97-79-14W
| Amphenol Industrial Operations | | | 10
|
FDH Electronics | M83723/61-114W
| Spacecraft Components Corp | Connector Acc | | 23
|
M85049/63S14W
| Amphenol PCD | Connector Acc | 1 : $18.422
5 : $18.422
10 : $16.255
25 : $15.352
50 : $15.352
100 : $14.804
250 : $14.293
500 : $14.293
1,000 : $13.817
2,500 : $13.817
10,000 : $13.371
|
| 2
|
M85049/144-14W04-5
| Amphenol PCD | Backshells & Ac | | 0
|
M83723/59-214WR
| Amphenol PCD | Backshells & Ac | | 0
|
M83723/60-214WR
| Amphenol PCD | Backshells & Ac | | 0
|
M83723/60-214WR
| Glenair Inc | Connector Acc
RoHS : Not Compliant | | 0
|
M85049/146S14W06
| Amphenol PCD | Backshells & Ac | | 0
|
M85049/77-14W05
| Amphenol PCD | Backshells & Ac | 1 : $122.188
5 : $122.188
10 : $107.813
25 : $101.823
50 : $101.823
100 : $98.187
250 : $94.801
500 : $94.801
1,000 : $91.641
2,500 : $91.641
10,000 : $88.685
|
| 0
|
M83723/59-214WT
| Amphenol PCD | Backshells & Ac | | 0
|
M83723/59-214WT
| Glenair Inc | Backshells & Ac
RoHS : Not Compliant | | 0
|
M83723/60-214WT
| Glenair Inc | Backshells & Ac
RoHS : Not Compliant | | 0
|
M83723/60-214WT
| Amphenol PCD | Backshells & Ac | | 0
|
M85049/144-14W03-6
| Amphenol PCD | Backshells & Ac | | 0
|
M85049/144S14W04-5
| Amphenol PCD | Backshells & Ac | | 0
|
M85049/52114W
| Amphenol PCD | Connector Acc | | 0
|
Maritex | RMC 1206 1/4W, , T/R, 390K
| Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 1206; 390K; 5%; 1/4W | 20,000 : $0.006
5,000 : $0.008
1,000 : $0.008
1 : $0.054
|
| 25,880
|
RMC 1206 1/4W, , T/R, 110K
| Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 1206; 110K; 5%; 1/4W | 20,000 : $0.008
5,000 : $0.01
1,000 : $0.012
1 : $0.054
|
| 23,987
|
RMC 1206 1/4W, , T/R, 3M9
| Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 1206; 3M9; 5%; 1/4W | 5,000 : $0.008
1,000 : $0.009
1 : $0.054
|
| 12,194
|
RMC 1206 1/4W, , T/R, 620K
| Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 1206; 620K; 5%; 1/4W | 5,000 : $0.011
1,000 : $0.019
1 : $0.054
|
| 9,380
|
RMC 1206 1/4W, , T/R, 6M2
| Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 1206; 6M2; 5%; 1/4W | 5,000 : $0.008
1,000 : $0.009
1 : $0.054
|
| 8,097
|
RMC 1206 1/4W, , T/R, 9M1
| RDA Microelectronics | Chip Resistor; SMD; 1206; 9M1; 5%; 1/4W | 20,000 : $0.01
5,000 : $0.011
1,000 : $0.019
1 : $0.054
|
| 6,761
|
CFR 1/4W (2,5X6,8) 5% 100K
| Royal Electronic Factory (Thailand) Co Ltd | Carbon film fixed resistor; 100 Kohm; 5%; 1/4W; 2.5x6.8mm | 1,000 : $0.007
100 : $0.008
1 : $0.01
|
| 3,500
|
RMC 1206 1/4W, , T/R, 3M3
| Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 1206; 3M3; 5%; 1/4W | 5,000 : $0.008
1,000 : $0.009
1 : $0.054
|
| 2,876
|
RMC 1206 1/4W, , T/R, 7M5
| Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 1206; 7M5; 5%; 1/4W | 5,000 : $0.008
1,000 : $0.009
1 : $0.054
|
| 2,397
|
RMC 1206 1/4W, , T/R, 1M8
| Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 1206; 1M8; 5%; 1/4W | 5,000 : $0.008
1,000 : $0.009
1 : $0.046
|
| 1,900
|
RMC 1206 1/4W, , T/R, 180K
| Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 1206; 180K; 5%; 1/4W | | 876
|
RMC 1206 1/4W, , T/R, 680K
| Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 1206; 680K; 5%; 1/4W | 10,000 : $0.006
5,000 : $0.007
1,000 : $0.008
1 : $0.054
|
| 750
|
MMDT5214W
| Diotec Semiconductor AG | Bipolar Transistors (BJT); MMDT5214W; DIOTEC SEMICONDUCTOR
RoHS : Compliant | 6,000 : $0.023
3,000 : $0.024
100 : $0.029
30 : $0.031
10 : $0.042
1 : $0.056
|
| 200
|
RMC 1206 1/4W, , T/R, 510K
| Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 1206; 510K; 5%; 1/4W | | 62
|
RMC 1206 1/4W, , T/R, 1M5
| Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 1206; 1M5; 5%; 1/4W | 1,000 : $0.008
500 : $0.008
1 : $0.054
|
| 29
|
Pasternack Enterprises US | PE3C2114/WP-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 N Male (Plug) to SMA Male (Plug) Low Loss Cable 24 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to SMA male (plug) low loss cable 24 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C2114/WP-24 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2114/WP-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3C2114/WP-24 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2114/WP-24 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N Waterproof and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01
|
| 0
|
PE3C8814/WH-300
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/WH-300, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/WH-300 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/WH-300 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-WH coax. | 1 : $81.39
25 : $77.32
50 : $73.25
100 : $70.0
|
| 0
|
PE3C8814/WH-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/WH-36, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/WH-36 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/WH-36 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-WH coax. | 1 : $41.99
25 : $39.89
50 : $37.79
100 : $36.11
|
| 0
|
PE3C8814/WH-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/WH-12, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/WH-12 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/WH-12 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-WH coax. | 1 : $39.19
25 : $37.23
50 : $35.27
100 : $33.7
|
| 0
|
PE3C2114/WP-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 N Male (Plug) to SMA Male (Plug) Low Loss Cable 36 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to SMA male (plug) low loss cable 36 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C2114/WP-36 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2114/WP-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3C2114/WP-36 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2114/WP-36 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N Waterproof and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $158.99
25 : $151.04
50 : $143.09
100 : $136.73
|
| 0
|
PE3C2114/WP-60
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 N Male (Plug) to SMA Male (Plug) Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to SMA male (plug) low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C2114/WP-60 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2114/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3C2114/WP-60 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2114/WP-60 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N Waterproof and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $162.99
25 : $154.84
50 : $146.69
100 : $140.17
|
| 0
|
PE3C2114/WP-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to SMA Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to SMA male (plug) low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C2114/WP-48 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2114/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3C2114/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2114/WP-48 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N Waterproof and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $160.99
25 : $152.94
50 : $144.89
100 : $138.45
|
| 0
|
PE3C8814/WH-72
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/WH-72, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/WH-72 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/WH-72 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax. | 1 : $46.29
25 : $43.98
50 : $41.66
100 : $39.81
|
| 0
|
PE3C2114/WP
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 N Male (Plug) to SMA Male (Plug) Low Loss Cable Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to SMA male (plug) low loss cable using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C2114/WP can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2114/WP RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3C2114/WP is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2114/WP can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N Waterproof and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | | 0
|
PE3C8814/WH-120
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/WH-120, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/WH-120 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/WH-120 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-WH coax. | 1 : $60.99
25 : $57.94
50 : $54.89
100 : $52.45
|
| 0
|
PE3C8814/WH
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/WH, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/WH is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/WH can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-WH coax. | | 0
|
Waytek, Inc. | 14W47-B
| Leviton Manufacturing Co | Leviton 14W47-B Wetguard watertight locking plug is an industrial-grade NEMA 5-15P connector built for harsh environments. It features IP66, IP67 and IP69K ingress protection, nickel-plated brass contacts, and an EPTR rubber body. Rated for -40F to 140F operation, it resists water, acids, alkalies, lubricants, and solvents. | 1 : $24.36
10 : $23.77
20 : $23.39
50 : $22.79
100 : $22.41
|
| 20
|
7B5051N14W
| VTE Incorporated | 500A Weather Proof Power Bushing Black 1/8 - 1/4" 12V USCG 33 CFR SAE J2120 8.5 | 1 : $18.5
10 : $15.75
50 : $14.37
100 : $13.86
200 : $13.42
500 : $13.08
|
| 0
|
Win Source Electronics | 74AHC1G14W5-7
 | Diodes Incorporated | IC SCHMIT-TRIGG INV GATE SOT25
RoHS : Compliant | 4,325 : $0.0694
3,230 : $0.0774
2,500 : $0.08
1,815 : $0.0827
1,175 : $0.0854
485 : $0.104
|
| 1,182,000
|
74LVC1G14W5-7
| Diodes Incorporated | IC SGL SCHMITT INVERTER SOT25
RoHS : Compliant | 5,475 : $0.0548
4,085 : $0.0612
3,160 : $0.0633
2,295 : $0.0654
1,485 : $0.0675
610 : $0.0822
|
| 60,000
|
3214W-1-103E
| Bourns Inc | TRIMMER 10K OHM 0.25W J LEAD TOP
RoHS : Compliant | 250 : $1.214
185 : $1.354
145 : $1.4007
105 : $1.4474
70 : $1.4941
30 : $1.8209
|
| 7,000
|
3214W-1-202E
| Bourns Inc | TRIMMER 2K OHM 0.25W SMD
RoHS : Compliant | 270 : $1.1168
205 : $1.2456
160 : $1.2886
115 : $1.3315
75 : $1.3745
30 : $1.6751
|
| 5,000
|
ADA4851-4WYRUZ-R7
 | Analog Devices Inc | IC OPAMP VFB 105MHZ RRO 14TSSOP
RoHS : Compliant | 207 : $1.6292
155 : $1.8171
120 : $1.8798
87 : $1.9424
56 : $2.005
23 : $2.4437
|
| 3,650
|
3214W-1-501E
| Bourns Inc | TRIMMER 500 OHM 0.25W J LEAD TOP
RoHS : Compliant | 235 : $1.2804
180 : $1.4281
140 : $1.4773
100 : $1.5266
65 : $1.5758
30 : $1.9205
|
| 2,191
|
3214W-1-102E
| Bourns Inc | TRIMMER 1K OHM 0.25W SMD
RoHS : Compliant | 197 : $1.5266
147 : $1.7027
114 : $1.7614
83 : $1.8201
54 : $1.8788
22 : $2.2898
|
| 2,000
|
3214W-1-104E
| Bourns Inc | TRIMMER 100K OHM 0.25W SMD
RoHS : Compliant | 223 : $1.3467
167 : $1.5021
129 : $1.5538
94 : $1.6056
61 : $1.6574
25 : $2.02
|
| 2,000
|
3214W-1-503E
| Bourns Inc | TRIMMER 50K OHM 0.25W J LEAD TOP
RoHS : Compliant | 209 : $1.4356
157 : $1.6012
121 : $1.6564
88 : $1.7116
57 : $1.7668
24 : $2.1533
|
| 2,000
|
3214W-1-105E
| Bourns Inc | TRIMMER 1M OHM 0.25W J LEAD TOP / 1 MOhms 0.25W, 1/4W J Lead Surface Mount Trimmer Potentiometer Cermet 5.0 Turn Top Adjustment
RoHS : Compliant | 235 : $1.2782
180 : $1.4256
140 : $1.4748
100 : $1.524
65 : $1.5731
30 : $1.9172
|
| 1,750
|
3214W-1-502E
| Bourns Inc | TRIMMER 5K OHM 0.25W SMD
RoHS : Compliant | 270 : $1.1313
200 : $1.2619
155 : $1.3054
115 : $1.3489
75 : $1.3924
30 : $1.697
|
| 1,490
|
SNJ54HC14W
 | Texas Instruments | HEX SCHMITT-TRIGGER INVERTERS
RoHS : Not Compliant | 6 : $51.2043
5 : $57.1125
4 : $59.0819
3 : $61.0513
2 : $63.0207
1 : $76.8064
|
| 965
|
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand