160CCNRWNTZCWC Price, Distributor, Stock

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to BNC Male Cable 60 Inch Length Using RG142 Coax., Radio frequency assembly N male to BNC male cable 60 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to BNC male cable 60 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and BNC cable connection on the other. Our type N to BNC cable assemblies have a male gender on end 1 and male on end 2. This type N to BNC cable is a male to male coax assembly, PE3061-60, can also be known as a type N plug to BNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to BNC plug cable assembly PE3061-60 is built with RG142 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency type N male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3061-60 can also be used in the other direction and will be BNC male to N type male cable assembly if the opposite connectivity is required. Type N plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to BNC male cable 60 inch length using RG142 coax.

1 : $102.99
25 : $97.84
50 : $92.69
100 : $88.57

2,880

PE33321-60

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to N Male Right Angle Cable 60 Inch Length Using RG400 Coax., Radio frequency assembly N male to N male right angle cable 60 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable 60 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and right angle type N cable connection on the other. Our type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE33321-60, can also be known as a N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE33321-60 is built with RG400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 11 GHz maximum frequency type N male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33321-60 can also be used in the other direction and will be right angle N type male to type N male cable assembly if the opposite connectivity is required. N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 60 inch length using RG400 coax.

1 : $173.99
25 : $165.29
50 : $156.59
100 : $149.63

2,022

PE34431-60

Pasternack Enterprises

Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 60 inches. MHV Male to MHV Male Cable 60 Inch Length Using RG188 Coax., Radio frequency assembly MHV male to MHV male cable 60 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MHV male to MHV male cable 60 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to MHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and MHV cable connection on the other. Our MHV to MHV cable assemblies have a male gender on end 1 and male on end 2. This MHV to MHV cable is a male to male coax assembly, PE34431-60, can also be known as a MHV plug to MHV plug cable assembly and will be shipped same-day as it is purchased. MHV plug to MHV plug cable assembly PE34431-60 is built with RG188 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to MHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MHV male to MHV male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MHV plug to MHV plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to MHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV male to MHV male cable 60 inch length using RG188 coax.

1 : $113.99
25 : $108.29
50 : $102.59

188

PE35241-60

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to Reverse Polarity TNC Male Cable 60 Inch Length Using RG178 Coax., Radio frequency assembly N male to reverse polarity TNC male cable 60 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to reverse polarity TNC male cable 60 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and reverse polarity TNC cable connection on the other. Our N type to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to reverse polarity TNC cable is a male to male coax assembly, PE35241-60, can also be known as a N type plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to reverse polarity TNC plug cable assembly PE35241-60 is built with RG178 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this N type male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35241-60 can also be used in the other direction and will be reverse polarity TNC male to type N male cable assembly if the opposite connectivity is required. N type plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to reverse polarity TNC male cable 60 inch length using RG178 coax.

1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47

117

PE3561-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMC Plug Cable 60 Inch Length Using RG178 Coax., Radio frequency assembly SMA male to SMC plug cable 60 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMC plug cable 60 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMC cable connection on the other. Our SMA to SMC cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SMC cable is a male to plug coax assembly, PE3561-60, can also be known as a SMA plug to SMC male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMC male cable assembly PE3561-60 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3561-60 can also be used in the other direction and will be SMC plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMC plug cable 60 inch length using RG178 coax.

1 : $70.69
25 : $67.16
50 : $63.62
100 : $60.79

PE33001-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to N Male Cable 60 Inch Length Using RG401 Coax., Radio frequency assembly SMA male to N male cable 60 inch length using RG401 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male cable 60 inch length using RG401 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE33001-60, can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE33001-60 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33001-60 can also be used in the other direction and will be N type male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 60 inch length using RG401 coax.

1 : $329.99
25 : $313.49
50 : $296.99

PE3C9781-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: 10KV, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel Over Copper, RF Cable Part Number: RG303HV, RF Cable Type: RG303HV, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. 10KV Male to SHV Plug Cable 60 Inch Length Using RG303HV Coax., Radio frequency assembly 10KV male to SHV plug cable 60 inch length using RG303HV coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 10KV male to SHV plug cable 60 inch length using RG303HV coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10KV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 10KV cable connection on one end and SHV cable connection on the other. Our 10KV to SHV cable assembly has male gender on end 1 and plug on end 2. PE3C9781-60 can also be known as a 10KV plug to SHV male cable assembly and will be shipped same-day as it is purchased. 10KV plug to SHV male cable assembly PE3C9781-60 is built with RG303HV which is a coax type. The Pasternack 10KV cable assembly is manufactured with 10KV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10KV male to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9781-60 can also be used in the other direction and will be SHV plug to 10KV male cable assembly if the opposite connectivity is required. 10KV plug to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10KV to SHV cable assembly for quick shipment worldwide. Variations of 10KV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10KV male to SHV plug cable 60 inch length using RG303HV coax.

1 : $265.99
25 : $252.69
50 : $239.39
100 : $228.75

PE3511-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male Right Angle to SMA Male Right Angle Cable 60 Inch Length Using RG188 Coax., Radio frequency assembly SMA male right angle to SMA male right angle cable 60 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA male right angle cable 60 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3511-60, can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3511-60 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable 60 inch length using RG188 coax.

1 : $85.59
25 : $81.31
50 : $77.03
100 : $73.61

PE36171-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to 7/16 DIN Male Cable 60 Inch Length Using RG402 Coax., Radio frequency assembly SMA male to 7/16 DIN male cable 60 inch length using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to 7/16 DIN male cable 60 inch length using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and 7/16 DIN cable connection on the other. Our SMA to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This SMA to 7/16 DIN cable is a male to male coax assembly, PE36171-60, can also be known as a SMA plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. SMA plug to 7/16 DIN plug cable assembly PE36171-60 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36171-60 can also be used in the other direction and will be 7/16 DIN male to SMA male cable assembly if the opposite connectivity is required. SMA plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to 7/16 DIN cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to 7/16 DIN male cable 60 inch length using RG402 coax.

1 : $323.99
25 : $307.79
50 : $291.59

PE3C4861-60

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 60 inches. Slide-On BMA Jack 2 Hole Flange to N Male Cable 60 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to N male cable 60 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to N male cable 60 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and type N cable connection on the other. Our BMA to type N cable assemblies have a jack gender on end 1 and male on end 2. This BMA to N type cable is a jack to male coax assembly, PE3C4861-60, can also be known as a BMA female to type N plug cable assembly and will be shipped same-day as it is purchased. BMA female to type N plug cable assembly PE3C4861-60 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency BMA jack 2 hole flange to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4861-60 can also be used in the other direction and will be type N male to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to type N cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to N male cable 60 inch length using PE-SR405FLJ coax.

1 : $186.99
25 : $177.64
50 : $168.29

PE3M0421-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMA, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 Contact Pin to BMA Size 8 Contact Socket Cable 60 Inch Length Using PE-P086 Coax with Heat Shrink, LF Solder. The PE3M0421-60 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA pin contact connection on one end and a BMA socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to BMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0421-60 RF cable has a FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMA pin to BMA socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0421-60 in-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMA pin to BMA socket cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0421-60 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMA to BMA RF cable are available on our downloadable PDF datasheet. BMA pin to BMA socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to BMA RF cable assembly as per your requirements.

1 : $327.99
10 : $314.87
25 : $301.75
100 : $288.63

PE3W00390/SP1-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male Right Angle to TNC Female Right Angle Bulkhead Low Loss Cable 60 Inch Length Using LMR-200 Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly TNC male right angle to TNC female right angle bulkhead low loss cable 60 inch length using LMR-200 coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC female right angle bulkhead low loss cable 60 inch length using LMR-200 coax with heatshrink and 90 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a right angle TNC bulkhead cable connection on the other. Our low loss right angle TNC to right angle TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W00390/SP1-60 can also be known as a low loss right angle TNC plug to right angle TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W00390/SP1-60 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle TNC male to right angle bulkhead TNC female cable has a maximum VSWR of 1.4:1. TNC plug to TNC jack cable assembly PE3W00390/SP1-60 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W00390/SP1-60 can also be used in the other direction and will be a right angle TNC female bulkhead to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC right angle jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $139.99
25 : $132.99
50 : $125.99
100 : $120.39

PE3W03981-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Female to SMA Male Right Angle Cable 60 Inch Length Using RG174 Coax., Radio frequency assembly SMA female to SMA male right angle cable 60 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to SMA male right angle cable 60 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This SMA to SMA cable is a female to male coax assembly, PE3W03981-60, can also be known as a SMA jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3W03981-60 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA female to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03981-60 can also be used in the other direction and will be right angle SMA male to SMA female cable assembly if the opposite connectivity is required. SMA jack to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA male right angle cable 60 inch length using RG174 coax.

1 : $64.19
25 : $60.98
50 : $57.77
100 : $55.2

PE3W11608

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. SMB Jack Bulkhead to SMB Jack Bulkhead Cable Using PE-C100-LSZH Coax. PE3W11608 is a SMB jack bulkhead to SMB jack bulkhead cable using PE-C100-LSZH coax. This Pasternack SMB jack bulkhead to SMB jack bulkhead cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMB for connector 2. Our jack SMB bulkhead to jack SMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11608 SMB jack bulkhead to SMB jack bulkhead cable assembly is constructed with PE-C100-LSZH coax.

PE3W16072

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-FR, RF Cable Type: LMR-600-FR, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Cable Using LMR-600-FR Coax. PE3W16072 is a 7/16 DIN male to 7/16 DIN male cable using LMR-600-FR coax. This Pasternack 7/16 DIN male to 7/16 DIN male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 7/16 DIN to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16072 7/16 DIN male to 7/16 DIN male cable assembly is constructed with LMR-600-FR coax, * LMR™ is a trademark of Times Microwave Systems.

TE Connectivity

1-160301-9

TE Connectivity

250 FASTON,REC.,10-12 AWG,PHBZ Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 10 – 12 AWG Wire Size: 4 – 6 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 10 – 12 AWG 4 – 6 mm² | Quick Disconnect | TE Connectivity
RoHS : Compliant

1,000 : $0.19
100 : $0.26
10 : $0.31
1 : $0.41

178,581

1-1601061-2

TE Connectivity

TAB,250X032,STD,SMZ Magnet Wire Terminal Type: Tab Magnet Wire Size: 34 – 18 AWG Magnet Wire Size: .16 – 1.02 mm Termination Method to Wire & Cable: Insulation Displacement (IDC) Mating Tab Width: .25 in Tab 34 – 18 AWG .16 – 1.02 mm Insulation Displacement (IDC) | TE Connectivity
RoHS : Compliant

1,000 : $0.33
100 : $0.44
10 : $0.54
1 : $0.69

39,976

1-160304-8

TE Connectivity

250 FASTON,REC.,14-17AWG,TPPHBZ Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 17 – 14 AWG Wire Size: 1 – 2.5 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 17 – 14 AWG 1 – 2.5 mm² | Quick Disconnect | TE Connectivity
RoHS : Compliant

1,000 : $0.26
100 : $0.35
10 : $0.43
1 : $0.54

2,666

1-1604256-1

TE Connectivity

UMNL BULKHEAD CONN,4 POS Number of Positions: 4 Connector & Housing Type: Receptacle Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Wire-to-Panel Ampseal Header | 4 Receptacle Housing Crimp | TE Connectivity
RoHS : Compliant

2,500 : $2.22
1,000 : $2.61
500 : $2.88
250 : $3.08
100 : $3.44
50 : $3.52
25 : $3.6
10 : $4.07
1 : $4.5

1,675

1-160301-6

TE Connectivity

250 FASTON,REC.,10-12 AWG,TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 10 – 12 AWG Wire Size: 4 – 6 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 10 – 12 AWG 4 – 6 mm² | Quick Disconnect | TE Connectivity
RoHS : Compliant

1,000 : $0.15
100 : $0.2
10 : $0.24
1 : $0.32

1,239

1-1600961-7

TE Connectivity

CONT 12-16 AWG PWR, MFBL PLATE Contact Mating Area Plating Material: Gold (Au) Contact Type: Receptacle Wire Contact Termination Area Plating Material: Tin Wire Size: 14 – 12 AWG Operating Voltage: 300 VAC 60 VAC Gold (Au) Receptacle Tin 14 – 12 AWG | TE Connectivity
RoHS : Compliant

1,000 : $2.25
500 : $2.32
250 : $2.39
100 : $2.47
50 : $2.54
1 : $2.79

970

1-1600961-8

TE Connectivity

CONT 12-16 AWG PWR, STD PLATE Contact Mating Area Plating Material: Gold (Au) Contact Type: Receptacle Wire Contact Termination Area Plating Material: Tin Wire Size: 14 – 12 AWG Operating Voltage: 60 VAC 300 VAC Gold (Au) Receptacle Tin 14 – 12 AWG | TE Connectivity
RoHS : Compliant

1,000 : $2.53
500 : $2.6
250 : $2.68
100 : $2.77
50 : $2.85
1 : $3.13

949

1-1761607-3

TE Connectivity

IDC LOW PRO HDR 40P RA LAT BLK Connector System: Wire-to-Board Number of Positions: 40 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 40 2.54 mm .1" | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $8.19
500 : $8.42
250 : $8.68
100 : $8.98
50 : $9.24
1 : $10.14

643

1-1761608-1

TE Connectivity

IDC LOW PRO HDR 34P VERT SHT L Connector System: Wire-to-Board Number of Positions: 34 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 34 2.54 mm .1" | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $7.38
500 : $7.58
250 : $7.82
100 : $8.08
50 : $8.32
1 : $9.13

625

5102160-5

TE Connectivity

A/L UNIV HDR 24P RA Connector System: Wire-to-Board Number of Positions: 24 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 24 2.54 mm .1" | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $4.92
500 : $5.05
250 : $5.21
100 : $5.39
50 : $5.54
1 : $6.08

385

1-1761607-5

TE Connectivity

IDC LOW PRO HDR 50P RA LAT BLK Connector System: Wire-to-Board Number of Positions: 50 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 50 2.54 mm .1" | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $9.76
500 : $10.04
250 : $10.35
100 : $10.7
50 : $11.01
1 : $12.08

315

1-1478916-0

TE Connectivity

SMA STR PLG C/CRMP RG174 GSS RF Interface: SMA RF Connector Style: Plug RF Connector Mated Outer Diameter (Approximate): .25 in RF Connector Mated Outer Diameter (Approximate): 6.35 mm Impedance: 50 Ω SMA Plug .25" 6.35 mm | TE Connectivity
RoHS : Compliant

1,000 : $7.74
500 : $7.96
250 : $8.2
100 : $8.48
50 : $8.72
1 : $9.58

268

FN2090LL-16-06

TE Connectivity

FN2090LL-16-06 Current Rating: 16 A Input Termination Type: FASTON Output Termination Type: FASTON Leakage Current (Max) (120VAC, 60Hz): 2.98 mA Leakage Current (Max) (250VAC, 50Hz): 4.77 mA 16 A FASTON 2.98 mA | TE Connectivity
RoHS : Compliant

10 : $186.1
1 : $206.78

T1329160116-000

TE Connectivity

H16A-TG-PG16 Hood & Base Connector Product Type: Hood Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Hood Bottom Locking | TE Connectivity
RoHS : Compliant

25 : $17.86
10 : $19.24
1 : $20.61

5102160-8

TE Connectivity

A/L UNIV HDR 34P RA Connector System: Wire-to-Board Number of Positions: 34 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 34 2.54 mm .1" | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $4.72
500 : $4.85
250 : $5.0
100 : $5.17
50 : $5.32
1 : $5.84

Teledyne HiRel

M38510/31603BEA

Teledyne HiRel

LATCH, 8-BIT ADDRESSABLE
RoHS : Not Compliant

5962-9160701M2A

Teledyne HiRel

SHIFT STORAGE REGISTER, 8-BIT UNIVERSAL, WITH SYNCHRONOUS RESET AND COMMON I/O
RoHS : Not Compliant

5962-9160601MLA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9160301MFA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN
RoHS : Not Compliant

5962-9221606MRA

Teledyne HiRel

SHIFT REGISTER, 8-BIT UNIVERSAL, TTL-COMPATIBLE WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/01601BBA

Teledyne HiRel

AND GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/31603BFA

Teledyne HiRel

LATCH, 8-BIT ADDRESSABLE
RoHS : Not Compliant

M38510/31603BXA

Teledyne HiRel

LATCH, 8-BIT ADDRESSABLE
RoHS : Not Compliant

5962-9221604MRA

Teledyne HiRel

SHIFT REGISTER, 8-BIT UNIVERSAL, TTL-COMPATIBLE WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-9091601B2A

Teledyne HiRel

MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE AND PULL-UP RESISTORS
RoHS : Not Compliant

5962-9160301MEA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN
RoHS : Not Compliant

5962-9091601MRA

Teledyne HiRel

MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE AND PULL-UP RESISTORS
RoHS : Not Compliant

5962-9221602M2A

Teledyne HiRel

SHIFT REGISTER, 8-BIT UNIVERSAL, TTL-COMPATIBLE WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-9091601M2A

Teledyne HiRel

MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE AND PULL-UP RESISTORS
RoHS : Not Compliant

5962-9091601BSA

Teledyne HiRel

MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE AND PULL-UP RESISTORS
RoHS : Not Compliant

Venkel Ltd.

C0402X7R160-823KNP

VENKEL LTD

Chip Capacitor;0402;X7R;16V;0.082uF;�10%
RoHS : Compliant

60,000

C0201X7R160-471KNP

VENKEL LTD

Chip Capacitor;0201;X7R;16V;470pF;�10%
RoHS : Compliant

45,000

C0603C0G160-561FNP

VENKEL LTD

Chip Capacitor;0603;C0G;16V;560pF;�1%
RoHS : Compliant

36,000

CR0805-8W-1600FT

VENKEL LTD

Chip Resistor;0805;1/8W;160R;�1%
RoHS : Compliant

CRG2010-V-160JT

VENKEL LTD

RoHS 10/10 Green CR;2010;1/2W;16R;�5%
RoHS : Compliant

C01005C0G160-1R8BNP

VENKEL LTD

Chip Capacitor;01005;C0G;16V;1.8pF;�0.1pF
RoHS : Compliant

C01005C0G160-1R8CNE

VENKEL LTD

Chip Capacitor;01005;C0G;16V;1.8pF;�0.25pF
RoHS : Compliant

C01005C0G160-220KNP

VENKEL LTD

Chip Capacitor;01005;C0G;16V;22pF;�10%
RoHS : Compliant

C01005C0G160-330JNE

VENKEL LTD

Chip Capacitor;01005;C0G;16V;33pF;�5%
RoHS : Compliant

C01005HQN160-3R6CNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;16V;3.6pF;�0.25pF
RoHS : Compliant

C01005HQN160-8R0BNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;16V;8pF;�0.1pF
RoHS : Compliant

C0603X7R160-104JNP

VENKEL LTD

Chip Capacitor;0603;X7R;16V;0.1uF;�5%
RoHS : Compliant

C0603X7R160-393JNP

VENKEL LTD

Chip Capacitor;0603;X7R;16V;0.039uF;�5%
RoHS : Compliant

C0603X7R160-393KNE

VENKEL LTD

Chip Capacitor;0603;X7R;16V;0.039uF;�10%
RoHS : Compliant

C0603X7R160-474JNP

VENKEL LTD

Chip Capacitor;0603;X7R;16V;0.47uF;�5%
RoHS : Compliant

Win Source Electronics

C3216X7S2A225K160AB

TDK Corporation

CAP CER 2.2UF 100V X7S 1206
RoHS : Compliant

3,050 : $0.0985
2,275 : $0.1099
1,760 : $0.1137
1,280 : $0.1175
825 : $0.1213
340 : $0.1478

464,300

BKP1608HS121-T

TAIYO YUDEN

FERRITE BEAD 120 OHM 0603 1LN / Ferrite Beads Multi-Layer Power 120Ohm 25% 100MHz 2.7A 0.035Ohm DCR 0603 T/R
RoHS : Compliant

3,220 : $0.1044
2,410 : $0.1164
1,865 : $0.1204
1,355 : $0.1244
875 : $0.1285
360 : $0.1566

135,844

TLP2160(TP

Toshiba America Electronic Components

218 : $1.3788
163 : $1.5379
126 : $1.591
92 : $1.644
59 : $1.697
25 : $2.0682

36,563

TPS54160ADRC

Texas Instruments

Step-Down DC-DC Converter 60V 1.5A 2.5MHz VSON-10

380 : $0.7939
285 : $0.8855
220 : $0.9161
160 : $0.9466
105 : $0.9771
45 : $1.1909

32,600

VNQ5160K

STMicroelectronics

116 : $2.9002
93 : $3.0182
72 : $3.136
50 : $3.3719
33 : $3.4897
16 : $3.7256

25,000

STG4160BJR

STMicroelectronics

IC SWITCH SGL SPDT 2:1 8FLIPCHIP
RoHS : Compliant

77 : $4.379
58 : $4.8843
45 : $5.0527
33 : $5.2211
21 : $5.3896
9 : $6.5685

19,890

PBHV3160ZX

Nexperia

IC TRANS PNP 600V 0.1A SOT223
RoHS : Compliant

305 : $0.9849
230 : $1.0985
180 : $1.1364
130 : $1.1743
85 : $1.2122
35 : $1.4773

17,000

RF1604TR7

RF Micro Devices Inc

RF Switch SP4T 0MHz to 2.7GHz 23dB 12-Pin QFN EP
RoHS : Compliant

23 : $16.8737
19 : $17.5762
15 : $18.2799
10 : $19.686
7 : $20.3885
3 : $21.7945

13,333

NRF9160-SICA-B1A-R7

Nordic Semiconductor

IC RF TXRX+MCU CELL LTE-M/NB-IOT / IC RF TxRx + MCU Cellular GPS 700MHz ~ 2.2GHz Module
RoHS : Compliant

14 : $21.4319
12 : $22.3031
9 : $23.1743
7 : $24.9167
4 : $25.7879
2 : $27.5304

11,000

LMR16006YQ3DDCRQ1/LMR16006YQ3DDCTQ1

Texas Instruments

109 : $2.7745
87 : $2.8873
67 : $3.0
47 : $3.2256
30 : $3.3384
15 : $3.564

10,390

LM5160DNTR/LM5160DNTJ

Texas Instruments

77 : $3.9436
61 : $4.1039
47 : $4.2642
33 : $4.5848
22 : $4.7451
10 : $5.0657

9,980

LM5160DNTR/LM5160DNTT

Texas Instruments

77 : $3.9436
61 : $4.1039
47 : $4.2642
33 : $4.5848
22 : $4.7451
10 : $5.0657

9,820

ADSP-21060KSZ-160

Analog Devices Inc

SHARC Processor
RoHS : Compliant

1 : $822.4478

200

M29F160FB5AN6E2

Micron Technology Inc

IC FLASH 16M PARALLEL 48TSOP
RoHS : Compliant

31 : $9.7745
23 : $10.9023
18 : $11.2782
13 : $11.6542
9 : $12.0301
4 : $14.6617

100

ADC12D1600RFIUT

Texas Instruments

IC ADC 12BIT SRL 3.2G 2CH 292BGA
RoHS : Not Compliant

1 : $3,911.6418

Wuhan P&S

MURS160-E3/5BT

Vishay Intertechnologies

Surface-Mount Ultrafast Plastic Rectifier
RoHS : Compliant

1 : $0.79
100 : $0.27
500 : $0.25
1,000 : $0.24

313,600

MBRA160T3G

onsemi

Surface Mount Schottky Barrier Power Rectifier
RoHS : Compliant

1 : $0.23
100 : $0.15
500 : $0.12
1,000 : $0.11

265,000

NCP114AMX160TCG

onsemi

RoHS : Compliant

1 : $0.11
100 : $0.07
500 : $0.06
1,000 : $0.06

132,000

FGY160T65SPD-F085

onsemi

650V,160A,Field Stop Trench IGBT
RoHS : Compliant

1 : $23.46
100 : $14.98
500 : $12.35
1,000 : $11.35

50,400

NVMFS5A160PLZT1G

onsemi

P-CH Power MOSFET,-60V,-100A,7.7m��
RoHS : Compliant

1 : $3.47
100 : $2.22
500 : $1.83
1,000 : $1.68

36,000

SQRS160EP-T1_GE3

Vishay Intertechnologies

N-CHANNEL 60-V (D-S) 175C MOSFET
RoHS : Compliant

1 : $6.36
100 : $2.12
500 : $1.96
1,000 : $1.91

30,000

NCP160AMX350TBG

onsemi

250mA,3.5V,LDO for RF and Analog Circuit
RoHS : Compliant

1 : $0.18
100 : $0.12
500 : $0.1
1,000 : $0.09

20,000

MUR160RLG

onsemi

SWITCHMODE Power Rectifiers
RoHS : Compliant

1 : $0.21
100 : $0.14
500 : $0.11
1,000 : $0.1

9,028

NTBG160N120SC1

onsemi

1200V, 160m��,19.5A,N�\\Channel SiC MOSFET
RoHS : Compliant

1 : $11.76
100 : $7.51
500 : $6.19
1,000 : $5.69

8,000

P6SMB160A-E3/52

Vishay Intertechnologies

Surface-Mount TRANSZORB Transient Voltage Suppressors
RoHS : Compliant

1 : $1.11
100 : $0.37
500 : $0.34
1,000 : $0.34

5,250

IXBH9N160G

Littelfuse Inc

IGBT 1600V 9A
RoHS : Compliant

1 : $19.18
100 : $12.24
500 : $10.1
1,000 : $9.28

5,010

M95160-DWDW4TP/K

STMicroelectronics

Automotive 16-Kbit SPI bus EEPROM with high speed clock
RoHS : Compliant

1 : $0.29
100 : $0.29
500 : $0.29
1,000 : $0.29

4,000

VOM160RT

Vishay Intertechnologies

Phototriac Output Optocoupler Non-Zero Crossing, 0.5 kV/?s dV/dt, 600 V
RoHS : Compliant

1 : $2.84
100 : $0.95
500 : $0.88
1,000 : $0.85

2,000

71600-026LF

Amphenol FCi

IDC Receptacle,Double row,26 P,2.54mm
RoHS : Compliant

1 : $1.4
100 : $1.36
500 : $1.33
1,000 : $1.3

1,080

STEVAL-MKI160V1

STMicroelectronics

LSM6DS3 Adapter Board

1 : $18.31
100 : $18.31
500 : $18.31
1,000 : $18.31

160CCNRWNTZCWC Distributor

Link URL