 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
2053FCD-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 ComSIT USA | LT2053J1 | MATEC | AVAILABLE EU | 7,791 | ||
| 22053101 | Molex | AVAILABLE EU | 15 | |||
 NexGen Digital | MIC5205-3.3BM5 | Micrel Inc | RoHS : Not Compliant | 2,769 | ||
SC5205-3.3CSK | Semtech Corporation | RoHS : Not Compliant | 378 | |||
 Rutronik | 22053031 | Molex | 03P KK Pin Header 2.54mm 90° FrictionL. RoHS : Compliant |
| 39,900 | |
| 2053380005 | Molex | 05P PICO LOCK HEADER 1R RoHS : Compliant |
| 5,400 | ||
| ISP2053-AX-JT | Insight SiP | BLE5.2-Module nRF5340 RoHS : Compliant |
| 60 | ||
| ISP2053-AX-EB | Insight SiP | ISP2053-Evaluation Board RoHS : Compliant |
| 3 | ||
 Chip-Germany GmbH | SL2-053-20G | Fischer Connectors | 4 | |||
| 205-3TCA-DM 24VDC | ZONG CHUAN/ KUHNKE | 3 | ||||
 Flip Electronics | CY8C20534-12PVXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 3,074 | |
| CY8C20536A-24PVXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 9 | ||
 Pasternack Enterprises US | PE3C6205-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 36 inches. Plenum N Male to N Male Right Angle Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum N male to N male right angle low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to N male right angle low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-NM-LP type N to TC-SPP250-NM-RA-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-NM-LP N type cable connection on one end and right angle TC-SPP250-NM-RA-LP type N cable connection on the other. Our low PIM TC-250-NM-LP type N to right angle TC-SPP250-NM-RA-LP N type cable assemblies have a male gender on end 1 and male on end 2. This TC-250-NM-LP type N to TC-SPP250-NM-RA-LP type N cable is a male to male coax assembly, PE3C6205-36, can also be known as a low PIM TC-250-NM-LP N type plug to right angle TC-SPP250-NM-RA-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-250-NM-LP type N plug to TC-SPP250-NM-RA-LP N type plug cable assembly PE3C6205-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-NM-LP N cable assembly is manufactured with TC-250-NM-LP type N to right angle TC-SPP250-NM-RA-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-NM-LP type N male to TC-SPP250-NM-RA-LP type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6205-36 can also be used in the other direction and will be right angle TC-SPP250-NM-RA-LP type N male to TC-250-NM-LP N type male cable assembly if the opposite connectivity is required. Low PIM TC-250-NM-LP type N plug to TC-SPP250-NM-RA-LP N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-NM-LP type N to TC-SPP250-NM-RA-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-NM-LP N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to N male right angle low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 389 | |
| PE3W12053-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated N Male to SMA Male Low Loss Cable 60 Inch Length Using LMR-200-FR Coax., Radio frequency assembly fire rated N male to SMA male low loss cable 60 inch length using LMR-200-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Fire rated N male to SMA male low loss cable 60 inch length using LMR-200-FR coax, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low loss N type to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W12053-60 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3W12053-60 is built with LMR-200-FR which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12053-60 can also be used in the other direction and will be SMA male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to SMA male low loss cable 60 inch length using LMR-200-FR coax. |
| 51 | ||
| PE3W12053-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. Fire Rated N Male to SMA Male Low Loss Cable 72 Inch Length Using LMR-200-FR Coax., Radio frequency assembly fire rated N male to SMA male low loss cable 72 inch length using LMR-200-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Fire rated N male to SMA male low loss cable 72 inch length using LMR-200-FR coax, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low loss type N to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W12053-72 can also be known as a low loss N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3W12053-72 is built with LMR-200-FR which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12053-72 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to SMA male low loss cable 72 inch length using LMR-200-FR coax. |
| 51 | ||
| PE3W12053-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Fire Rated N Male to SMA Male Low Loss Cable 36 Inch Length Using LMR-200-FR Coax., Radio frequency assembly fire rated N male to SMA male low loss cable 36 inch length using LMR-200-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Fire rated N male to SMA male low loss cable 36 inch length using LMR-200-FR coax, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low loss type N to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W12053-36 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3W12053-36 is built with LMR-200-FR which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12053-36 can also be used in the other direction and will be SMA male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to SMA male low loss cable 36 inch length using LMR-200-FR coax. |
| 51 | ||
| PE2205-30 | Pasternack Enterprises | Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Design: Coupler, Minimum Frequency: 7 GHz, Maximum Frequency: 12.4 GHz, Maximum Input Power: 50 Watt, Coupling Value: 30 dB. Directional 30 dB SMA Coupler From 7 GHz to 12.4 GHz Rated To 50 Watts. RF coupler part number PE2205-30 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 7 GHz and a maximum frequency of 12.4 GHz. Directional coupler part # PE2205-30 is constructed with a coupling value of 30 dB and a coupler directivity of 17 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.3 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.3 dB and a maximum VSWR of 1.3. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2205-30 directional 30 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 12 | ||
| PE3W20537/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. Water Blue FAKRA Jack to BNC Male Cable Using LMR-100A-UF Coax with HeatShrink. PE3W20537/HS is a FAKRA jack to BNC male cable using LMR-100A-UF coax. This Pasternack FAKRA jack to BNC male cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm BNC for connector 2. Our jack FAKRA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20537/HS FAKRA jack to BNC male cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W20532/PH180 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to MMCX Plug Right Angle Cable Using LMR-100-FR Coax with 180 Deg. Clock. PE3W20532/PH180 is a MCX plug right angle to MMCX plug right angle cable using LMR-100A-FR coax. This Pasternack MCX plug right angle to MMCX plug right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm MMCX for connector 2. MCX right angle to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX right angle to plug MMCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20532/PH180 MCX plug right angle to MMCX plug right angle cable assembly is constructed with LMR-100A-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C2053LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Male to Reverse Polarity SMA Male Cable Using RG58 Coax with HeatShrink, LF Solder. PE3C2053LF/HS is a N male to reverse polarity SMA male cable using RG58 coax. This Pasternack N male to reverse polarity SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to reverse polarity male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2053LF/HS N male to SMA reverse polarity male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W22053 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. SSMA Female 2 Hole Flange to SSMA Female 2 Hole Flange Cable Using PE-047SR Tan Coax. PE3W22053 is a SSMA female 2 hole flange to SSMA female 2 hole flange cable using PE-047SR coax. This Pasternack SSMA female 2 hole flange to SSMA female 2 hole flange cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SSMA for connector 2. Our female SSMA 2 hole flange to female SSMA 2 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W22053 SSMA female 2 hole flange to SSMA female 2 hole flange cable assembly is constructed with PE-047SR coax. | 0 | |||
| PE3W20531 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 10KV, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. BNC Male to 10KV Female Bulkhead Cable Using RG58 Coax. PE3W20531 is a BNC male to 10KV female bulkhead cable using RG58 coax. This Pasternack BNC male to 10KV female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm 10KV for connector 2. Our male BNC to female 10KV bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20531 BNC male to 10KV female bulkhead cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W20535 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm. 2.92mm Male Right Angle to SMA Female Bulkhead Cable Using PE-P047 Coax. PE3W20535 is a 2.92mm male right angle to SMA female bulkhead cable using PE-P047 coax. This Pasternack 2.92mm male right angle to SMA female bulkhead cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMA for connector 2. 2.92mm right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 2.92mm right angle to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20535 2.92mm male right angle to SMA female bulkhead cable assembly is constructed with PE-P047 coax. | 0 | |||
| PE3205-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 36 inches. 7/16 DIN Male to 7/16 DIN Male Cable 36 Inch Length Using RG393 Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 36 inch length using RG393 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 36 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3205-36, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3205-36 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7.5 GHz maximum frequency 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 36 inch length using RG393 coax. |
| 0 | ||
| PE3C2053/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Male to Reverse Polarity SMA Male Cable Using RG58 Coax with HeatShrink. PE3C2053/HS is a N male to reverse polarity SMA male cable using RG58 coax. This Pasternack N male to reverse polarity SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to reverse polarity male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2053/HS N male to SMA reverse polarity male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W02053 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. N Female Bulkhead to BNC Male Cable Using PE-C100-LSZH Coax. PE3W02053 is a N female bulkhead to BNC male cable using PE-C100-LSZH coax. This Pasternack N female bulkhead to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our female N bulkhead to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02053 N female bulkhead to BNC male cable assembly is constructed with PE-C100-LSZH coax. | 0 | |||
| PE3W20530 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to 4.3-10 Male Cable Using LMR-240-FR Coax. PE3W20530 is a SMA female bulkhead to 4.3-10 male cable using LMR-240-FR coax. This Pasternack SMA female bulkhead to 4.3-10 male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our female SMA bulkhead to male 4.3-10 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20530 SMA female bulkhead to 4.3-10 male cable assembly is constructed with LMR-240-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
 TE Connectivity | M902-2053 | TE Connectivity | COMP NUT, 6/9/24SZ,CBL SZ .430-.570,HD10 Connector Backshell Product Type: Backshell Primary Product Material: PBT Number of Positions: 19 47 18 7 9 16 14 21 35 33 23 29 31 Sealable: No Operating Temperature Range: -40 – 273 °F Backshell PBT 19 | Deutsch Hd10 Backshell | Part Number: M902-2053 | Internal Number: M902-2053 | TE Connectivity RoHS : Compliant |
| 19,292 | |
| 172053-2 | TE Connectivity | MTEI CONN 2P REC ASSY Number of Positions: 2 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Retention: With Termination Method to Wire & Cable: Insulation Displacement (IDC) Standard Rectangular Connector | 2 Receptacle Connector Assembly With | Part Number: 172053-2 | Internal Number: 172053-2 | TE Connectivity RoHS : Compliant |
| 15,982 | ||
| 2-32053-1 | TE Connectivity | PIDG SPD 22-16 COMM 22-18MIL 8 Spade Terminal Type: Spade Tongue Terminal Wire Size: 22 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: M4 #8 Spade Tongue Terminal 22 AWG .3 – 1.42 mm² 509 – 3260 CMA | Pidg Spade Tongue Terminal | Part Number: 2-32053-1 | Internal Number: 2-32053-1 | TE Connectivity RoHS : Compliant |
| 12,306 | ||
| 2238205-3 | TE Connectivity | 250 FASTON,FLAG,REC.,22-16 AWG,PTBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 22 – 16 AWG Wire Size: .4 – 1.3 mm² Wire Size: 700 – 2600 CMA Receptacle Uninsulated 22 – 16 AWG .4 – 1.3 mm² | Quick Disconnect | Part Number: 2238205-3 | Internal Number: 2238205-3 | TE Connectivity RoHS : Compliant |
| 10,178 | ||
| 32053 | TE Connectivity | PIDG SPD 22-16 COMM 22-18MIL 8 Spade Terminal Type: Spade Tongue Terminal Wire Size: 22 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: #8 M4 Spade Tongue Terminal 22 AWG .3 – 1.42 mm² 509 – 3260 CMA | Pidg Spade Tongue Terminal | Part Number: 32053 | Internal Number: 32053 | Alias Number: 126360-000 | TE Connectivity RoHS : Compliant |
| 1,978 | ||
| 5120534-1 | TE Connectivity | 1FHP,64,30A/S,N,C,S10,12,13,15 PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 64 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5120534-1 | Internal Number: 5120534-1 | TE Connectivity RoHS : Compliant |
| 177 | ||
| 8-32053-1 | TE Connectivity | PIDG SPD 22-16 COMM 22-18MIL 8 Spade Terminal Type: Spade Tongue Terminal Wire Size: 22 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: M4 #8 Spade Tongue Terminal 22 AWG .3 – 1.42 mm² 509 – 3260 CMA | Pidg Spade Tongue Terminal | Part Number: 8-32053-1 | Internal Number: 8-32053-1 | Alias Number: AMPS-8-0032053-1 | TE Connectivity RoHS : Compliant |
| 177 | ||
 Venkel Ltd. | CRS0201-20W-2053FT | VENKEL LTD | Anti-Sulfuration CR;0201;1/20W;205K ;�1% RoHS : Compliant | 0 | ||
| CR0805-10W-2053DT | VENKEL LTD | Chip Resistor;0805;1/10W;205K ;�0.5% RoHS : Compliant | 0 | |||
| PWCR0805-VK-2053FT | VENKEL LTD | Pulse Withstanding CR;0805;1/2W;�100PPM;205K;�1% RoHS : Compliant | 0 | |||
| PWCR2010-XK-2053FT | VENKEL LTD | Pulse Withstanding CR;2010;1W;�100PPM;205K;�1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-2053FT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;205K ;�1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-2053BT | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;205K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-E-2053CT | VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;205K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-16W-K-2053FT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�100PPM;205K ;�1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-2053FT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;205K;�1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-K-2053BT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�100PPM;205K ;�0.1% RoHS : Compliant | 0 | |||
| CRG0603-Q-2053FT | VENKEL LTD | RoHS 10/10 Green CR;0603;1/10W;205K ;�1% RoHS : Compliant | 0 | |||
| PWCR0805-VK-2053DT | VENKEL LTD | Pulse Withstanding CR;0805;1/2W;�100PPM;205K;�0.5% RoHS : Compliant | 0 | |||
| PWCR2010-XK-2053DT | VENKEL LTD | Pulse Withstanding CR;2010;1W;�100PPM;205K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-TC-2053CT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�50PPM;205K;�0.25% RoHS : Compliant | 0 | |||
| AGCR0603-TK-2053DT | VENKEL LTD | Auto Grade Resistor;0603;1/4W;�100PPM;205K;�0.5% RoHS : Compliant | 0 | |||
 Waytek, Inc. | 2053 | Heyco | Heyco 2053 snap bushing is a nylon panel bushing sized for a .500" mounting hole to protect wire and cable as it passes through sheet metal or panel openings. Its snap-in design supports quick installation, abrasion protection, and cleaner wire routing in electrical and equipment applications. |
| 21,080 | |
| 986332053 | The Bosch Group | Mini Relay, CHange Over, 5-Pin SPDT, 30NO, 20NC, 12VDC w/Resistor | Like 75414 |
| 46 | ||
 Win Source Electronics | 2053425028 | Molex | CONN SOCKET 20-22AWG CRIMP GOLD / Socket Contact Gold 20-22 AWG Crimp Stamped RoHS : Compliant |
| 330,135 | |
| BU52053NVX-TR | ROHM Semiconductor | MAGNETIC SWITCH OMNIPOLAR 4SS0N RoHS : Compliant |
| 145,000 | ||
| MIC5205-3.3YM5 | Microchip Technology Inc | IC REG LDO 3.3V 0.15A SOT23-5 RoHS : Compliant |
| 120,000 | ||
MIC5205-3.3YM5-TR | Microchip Technology Inc | IC REG LDO 3.3V 0.15A SOT23-5 RoHS : Compliant |
| 106,770 | ||
| AP2205-33W5-7 | Diodes Incorporated | IC REG LINEAR 3.3V 250MA SOT25 / Linear Voltage Regulator IC Positive Fixed 1 Output 250mA SOT-25 RoHS : Compliant |
| 15,000 | ||
| MPXM2053GST1 | Nexperia | SENS PRESSURE 7.25 PSI MAX MPAK |
| 5,260 | ||
LTC2053HMS8 | Linear Technology | Precision, Rail-to-Rail Input and Output, Zero-Drift Instrumentation Amplifier with Resistor-Programmable Gain | IC OPAMP CHOPPER 1 CIRCUIT 8MSOP RoHS : Not Compliant |
| 5,000 | ||
| LTC2053HMS8#TRPBF | Linear Technology | IC OPAMP CHOPPER 200KHZ 8MSOP RoHS : Compliant |
| 4,760 | ||
| LTC2053IMS8#TR | Analog Devices Inc | IC OPAMP ZER-DRIFT 1CIRC 8MSOP RoHS : Not Compliant |
| 4,700 | ||
| LTC2053IMS8#TRPBF | Linear Technology | IC OPAMP CHOPPER 200KHZ 8MSOP RoHS : Compliant |
| 4,530 | ||
| LTC2053HMS8#PBF | Linear Technology | IC OPAMP CHOPPER 200KHZ 8MSOP RoHS : Compliant |
| 4,500 | ||
| LTC2053CMS8 | Linear Technology | Precision, Rail-to-Rail Input and Output, Zero-Drift Instrumentation Amplifier with Resistor-Programmable Gain RoHS : Not Compliant |
| 4,019 | ||
| AP2205-33Y-13 | Diodes Incorporated | IC REG LINEAR 3.3V 250MA SOT89-3 RoHS : Compliant |
| 3,911 | ||
| LTC2053CMS8#TRPBF | Linear Technology | IC OPAMP CHOPPER 200KHZ 8MSOP RoHS : Compliant |
| 3,870 | ||
| LTC2053CMS8#PBF | Linear Technology | IC OPAMP CHOPPER 200KHZ 8MSOP RoHS : Compliant |
| 3,690 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand