226RLK-R Price, Distributor, Stock

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. Plenum Snap-On 4.3-10 Male to N Female Bulkhead Low PIM Cable Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum snap-on 4.3-10 male to N female bulkhead low PIM cable using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum snap-on 4.3-10 male to N female bulkhead low PIM cable using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-BH-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310MS-LP 4.3-10 cable connection on one end and TC-SPP250-NF-BH-LP N type bulkhead cable connection on the other. Our low PIM TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-BH-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-BH-LP N type cable is a male to female coax assembly, PE3C6226, can also be known as a low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-NF-BH-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-NF-BH-LP type N jack cable assembly PE3C6226 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310MS-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-BH-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310MS-LP 4.3-10 male to TC-SPP250-NF-BH-LP type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6226 can also be used in the other direction and will be TC-SPP250-NF-BH-LP type N female bulkhead to TC-SPP250-4310MS-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-NF-BH-LP type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-BH-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310MS-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum snap-on 4.3-10 male to N female bulkhead low PIM cable using SPP-250-LLPL coax using Times Microwave parts.

468

PE3C8226-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. 4.1/9.5 Mini DIN Male to 4.3-10 Male Low PIM Cable 150 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable 150 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable 150 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to male coax assembly, PE3C8226-150CM, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly PE3C8226-150CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8226-150CM can also be used in the other direction and will be 4.3-10 male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable 150 cm length using TFT-402 coax using Times Microwave components.

1 : $106.99
25 : $101.64
50 : $96.29
100 : $92.01

PE3W02265LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. BNC Female to MHV Male Cable Using RG58 Coax with HeatShrink, RoHS. PE3W02265LF/HS is a BNC female to MHV male cable using RG58 coax. This Pasternack BNC female to MHV male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm MHV for connector 2. Our female BNC to male MHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02265LF/HS BNC female to MHV male cable assembly is constructed with RG58 coax.

PE3W22265

Pasternack Enterprises

Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. C Male Right Angle to N Male Cable Using RG213 Coax. PE3W22265 is a C male right angle to N male cable using RG213 coax. This Pasternack C male right angle to N male cable assembly uses a 50 Ohm C for connector 1 and a 50 Ohm N for connector 2. C right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male C right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22265 C male right angle to N male cable assembly is constructed with RG213 coax.

PE3W22605/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. SSMB Plug to TNC Female Bulkhead Cable Using LMR-100A-UF Coax with HeatShrink. PE3W22605/HS is a SSMB plug to TNC female bulkhead cable using LMR-100A-UF coax. This Pasternack SSMB plug to TNC female bulkhead cable assembly uses a 50 Ohm SSMB for connector 1 and a 50 Ohm TNC for connector 2. Our plug SSMB to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22605/HS SSMB plug to TNC female bulkhead cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W22634

Pasternack Enterprises

Key Specifications, Connector Series 1: GR874, Connector Gender 1: Sexless, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. GR874 Sexless to BNC Male Cable Using RG142 Coax. PE3W22634 is a GR874 sexless to BNC male cable using RG142 coax. This Pasternack GR874 sexless to BNC male cable assembly uses a 50 Ohm GR874 for connector 1 and a 50 Ohm BNC for connector 2. Our sexless GR874 to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22634 GR874 sexless to BNC male cable assembly is constructed with RG142 coax.

PE3W22650/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to SMA Male Cable Using LMR-100A-UF Coax with HeatShrink. PE3W22650/HS is a BMA jack to SMA male cable using LMR-100A-UF coax. This Pasternack BMA jack to SMA male cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm SMA for connector 2. Our jack BMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22650/HS BMA jack to SMA male cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W25226

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to Curry FAKRA Jack Cable Using RG174 Coax. PE3W25226 is a SMA female bulkhead to FAKRA jack cable using RG174 coax. This Pasternack SMA female bulkhead to FAKRA jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm FAKRA for connector 2. Our female SMA bulkhead to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25226 SMA female bulkhead to FAKRA jack cable assembly is constructed with RG174 coax.

PE3226-72

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMA Male to SMC Plug Cable 72 Inch Length Using RG223 Coax., Radio frequency assembly SMA male to SMC plug cable 72 inch length using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMC plug cable 72 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMC cable connection on the other. Our SMA to SMC cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SMC cable is a male to plug coax assembly, PE3226-72, can also be known as a SMA plug to SMC male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMC male cable assembly PE3226-72 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3226-72 can also be used in the other direction and will be SMC plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMC plug cable 72 inch length using RG223 coax.

1 : $80.29
25 : $76.28
50 : $72.26
100 : $69.05

PE3822-6

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to SMA Male Right Angle Cable 6 Inch Length Using RG405 Coax., Radio frequency assembly SMA male to SMA male right angle cable 6 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 6 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3822-6, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3822-6 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3822-6 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 6 inch length using RG405 coax.

1 : $82.39
25 : $78.27
50 : $74.15
100 : $70.86

PE3W00226

Pasternack Enterprises

PE3W02260

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to N Male Cable Using LMR-240-DB Coax. PE3W02260 is a reverse polarity SMA male to N male cable using LMR-240-DB coax. This Pasternack reverse polarity SMA male to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity male SMA to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02260 SMA reverse polarity male to N male cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W22600

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack 2 Hole Flange to SMA Female Cable Using RG188 Coax. PE3W22600 is a BMA jack 2 hole flange to SMA female cable using RG188 coax. This Pasternack BMA jack 2 hole flange to SMA female cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm SMA for connector 2. Our jack BMA 2 hole flange to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22600 BMA jack 2 hole flange to SMA female cable assembly is constructed with RG188 coax.

PE3W22637

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm. N Female Bulkhead to N Female Cable Using LMR-600-DB Coax. PE3W22637 is a N female bulkhead to N female cable using LMR-600-DB coax. This Pasternack N female bulkhead to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N bulkhead to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22637 N female bulkhead to N female cable assembly is constructed with LMR-600-DB coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W22653LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. N Female to SMA Male Cable Using TFT-5G-402 Coax with HeatShrink, LF Solder. PE3W22653LF/HS is a N female to SMA male cable using TFT-5G-402 coax. This Pasternack N female to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our female N to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22653LF/HS N female to SMA male cable assembly is constructed with TFT-5G-402 coax.

Relay Specialties

DR2260D20UR

Crydom Inc

SSR Relay; In: 4 ~ 32VDC 1A SPST-NO; Out: 48 V ~ 600 V 20 A; Screw Terminal
RoHS : Compliant

1 : $68.03
5 : $67.03
10 : $63.52
20 : $63.05
50 : $62.08

001022623

ABB Low Voltage Products and Systems

ABB/ENTRELEC RELAY INTERFACE 1

1 : $126.37
5 : $121.69

TE Connectivity

5-2232265-4

TE Connectivity

PTL 1X4 PLUG HSG GLW WIRE KEY A DGR Number of Positions: 4 Connector & Housing Type: Plug Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Power Triple Lock Glow Wire Plug | 4 Plug Housing Crimp | Part Number: 5-2232265-4 | Internal Number: 5-2232265-4 | TE Connectivity
RoHS : Compliant

1,000 : $0.57
100 : $0.77
10 : $0.95
1 : $1.2

14,247

RP73PF1E226RBTD

TE Connectivity

RP 1E 0.1W 226R 0.1% 25PPM 5K RL Resistance Value: 226 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 226 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1E226RBTD | Internal Number: 3-2176305-2 | TE Connectivity
RoHS : Compliant

2,500 : $0.21
1,000 : $0.22
500 : $0.23
250 : $0.23
100 : $0.24
50 : $0.24
25 : $0.25
10 : $0.26
1 : $0.26

1,685

643226-1

TE Connectivity

02P UMNL HDR ASSY R/A 94VO PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 2 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 2 | PCB Header & Receptacle | Part Number: 643226-1 | Internal Number: 643226-1 | TE Connectivity
RoHS : Compliant

1,000 : $1.66
100 : $2.22
10 : $2.74
1 : $3.47

516

RP73PF2A226KBTDF

TE Connectivity

RP 2A 0.25W 226K 0.1% 25PPM 1K RL Resistance Value: 226K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 226K Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF2A226KBTDF | Internal Number: 2-2176094-7 | TE Connectivity
RoHS : Compliant

500 : $0.42
250 : $0.43
100 : $0.44
50 : $0.46
25 : $0.47
10 : $0.49
1 : $0.5

508

3627453226C331K

TE Connectivity

3627C 453226 330UH 10% Inductance: 330 µH Current Rating (Max): 100 mA DC Resistance: 6.8 Ω Passive Component Tolerance: 10 % Shielded: No Power Inductor | 330 µH 100 mA 6.8 Ω 10 % | Part Number: 3627453226C331K | Internal Number: 1-2176640-6 | TE Connectivity
RoHS : Compliant

250 : $0.9
100 : $0.93
50 : $0.97
25 : $1.0
10 : $1.04
1 : $1.08

500

3627453226C151K

TE Connectivity

3627C 453226 150UH 10% Inductance: 150 µH Current Rating (Max): 130 mA DC Resistance: 3.5 Ω Passive Component Tolerance: 10 % Shielded: No Power Inductor | 150 µH 130 mA 3.5 Ω 10 % | Part Number: 3627453226C151K | Internal Number: 1-2176640-4 | TE Connectivity
RoHS : Compliant

250 : $0.9
100 : $0.93
50 : $0.97
25 : $1.0
10 : $1.04
1 : $1.08

500

RT8122-6-10M0

TE Connectivity

RT8122-6-10M0 Operating Voltage (Max): 300 VDC Current Rating (Max): 6 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rt Series & Rt Series N: High-Performance Chokes For Demanding Application | 300 VDC 6 A PCB Terminal PD2 | Part Number: RT8122-6-10M0 | Internal Number: 816955-SF | RT8122-6-10M0 Operating Voltage (Max): 300 VDC Current Rating (Max): 6 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rt Series & Rt Series N: High-Performance Chokes For Demanding Application | 300 VDC 6 A PCB Terminal PD2 | Part# RT8122-6-10M0
RoHS : Compliant

50 : $22.02
25 : $23.31
10 : $24.6
1 : $25.9

110

AVH22MSSFE6122604

TE Connectivity

AVH22 FLT SS MT RNG GRN 12V26A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC Momentary Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH22MSSFE6122604 | Internal Number: 1-2364687-3 | TE Connectivity
RoHS : Compliant

50 : $56.96
25 : $60.31
10 : $63.66
1 : $67.01

AVH19LSFE3122604

TE Connectivity

AVH19 FLT SS LK RNG RED 12V26A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC On On Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH19LSFE3122604 | Internal Number: 2364571-6 | TE Connectivity
RoHS : Compliant

50 : $50.45
25 : $53.42
10 : $56.39
1 : $59.36

AVH19MSFE13122604

TE Connectivity

AVH19 FLT SS MT R+P RED 12V26A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: Momentary 1 NO & 1 NC Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With Momentary Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH19MSFE13122604 | Internal Number: 2364573-5 | TE Connectivity
RoHS : Compliant

50 : $55.5
25 : $58.76
10 : $62.03
1 : $65.29

AVH25LSSFE1B122604

TE Connectivity

AVH25 FLT SS LK R+P R&B 12V26A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC On On Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH25LSSFE1B122604 | Internal Number: 2-2364703-6 | TE Connectivity
RoHS : Compliant

50 : $76.99
25 : $81.52
10 : $86.05
1 : $90.58

AVH19MSFPA122604

TE Connectivity

AVH19 FLT SS MT PWR R&G 12V26A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC Momentary Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH19MSFPA122604 | Internal Number: 2-2364575-1 | TE Connectivity
RoHS : Compliant

50 : $59.3
25 : $62.79
10 : $66.28
1 : $69.77

AVH25LSSFE16122604

TE Connectivity

AVH25 FLT SS LK R+P GRN 12V26A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC On On Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH25LSSFE16122604 | Internal Number: 1-2364703-4 | TE Connectivity
RoHS : Compliant

50 : $69.99
25 : $74.11
10 : $78.23
1 : $82.34

AVH25LSSFE13122604

TE Connectivity

AVH25 FLT SS LK R+P RED 12V26A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: On On 1 NO & 1 NC Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With On On Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH25LSSFE13122604 | Internal Number: 2364703-6 | TE Connectivity
RoHS : Compliant

50 : $69.99
25 : $74.11
10 : $78.23
1 : $82.34

AVH19LSFP6122604

TE Connectivity

AVH19 FLT SS LK PWR GRN 12V26A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: On On 1 NO & 1 NC Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With On On Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH19LSFP6122604 | Internal Number: 1-2364575-4 | TE Connectivity
RoHS : Compliant

50 : $55.5
25 : $58.76
10 : $62.03
1 : $65.29