250CFM-FAN-R Price, Distributor, Stock

Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Solder/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz. N Male Right Angle Low PIM Connector Solder Attachment for SPO-250, SPF-250, SPP-250-LLPL. TC-250-NM-RA-LP type N male right angle coaxial connector has an interface type of SPO-250, SPF-250, SPP-250-LLPL and a 50 Ohm impedance. Pasternack type N male connector uses shield/contact solder/solder as an attachment method. Our male type N right angle coaxial connector provides a minimum frequency of DC and a maximum frequency of 6 GHz. The Pasternack right angle N type male coaxial connector has a PTFE dielectric type and a VSWR of 1.35. The Pasternack N type coaxial connector has a brass body with tri-metal plating. Our TC-250-NM-RA-LP N typeright angle connector uses brass contact. This type N male right angle coaxial RF connector is RoHS and REACH compliant. This Pasternack right angle male type N connector will ship the same day as purchased. Our type N right angle male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom N type connector cable assemblies that will ship the same day as well.

1 : $19.07

400

PE34250LF-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm, Length: 36 inches. SMA Male to TNC Male Cable 36 Inch Length Using 53 Ohm RG55 Coax., Radio frequency assembly SMA male to TNC male cable 36 inch length using 53 Ohm RG55 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC male cable 36 inch length using 53 Ohm RG55 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE34250LF-36, can also be known as a SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE34250LF-36 is built with RG55 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34250LF-36 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male cable 36 inch length using 53 Ohm RG55 coax.

1 : $57.79
25 : $54.9
50 : $52.01
100 : $49.7

245

PE3C7252-50CM

Pasternack Enterprises

1 : $99.59
25 : $94.61
50 : $89.63
100 : $85.65

160

PE3W06250

Pasternack Enterprises

PE3W17250LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MCX Jack to BNC Male Cable Using LMR-100 Coax with HeatShrink, LF Solder. PE3W17250LF/HS is a MCX jack to BNC male cable using LMR-100A coax. This Pasternack MCX jack to BNC male cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm BNC for connector 2. Our jack MCX to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17250LF/HS MCX jack to BNC male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W25042

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm. SHV Jack to Alligator Clip Cable Using 93 Ohm RG62 Coax. PE3W25042 is a SHV jack to Alligator clip cable using RG62 coax. This Pasternack SHV jack to Alligator clip cable assembly uses a 50 Ohm SHV for connector 1 and a Alligator for connector 2. Our jack SHV to clip Alligator cable assembly uses a flexible cable type that is 93 Ohm. Pasternack PE3W25042 SHV jack to Alligator clip cable assembly is constructed with RG62 coax.

PE3W25079

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. SMA Female to N Male Right Angle Cable Using PE-SR402FL Coax. PE3W25079 is a SMA female to N male right angle cable using PE-SR402FL coax. This Pasternack SMA female to N male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to male N right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W25079 SMA female to N male right angle cable assembly is constructed with PE-SR402FL coax.

PE7AP250-10

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 8.5 GHz, Impedance: 50 Ohm, Power Maximum: 250 Watt, VSWR Maximum: 1.45:1, Attenuation: 10 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 10 dB Fixed Attenuator, N Male to N Female Directional Black Anodized Aluminum Heatsink Body Rated to 250 Watts Up to 8.5 GHz. PE7AP250-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7AP250-10 10 dB attenuator is rated for up to 8.5 GHz. Our microwave attenuator is rated to 250 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP250-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $1,350.0
5 : $1,296.0
10 : $1,242.0
25 : $1,188.0

PE3250-36

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to BNC Male Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly N male to BNC male cable 36 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to BNC male cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and BNC cable connection on the other. Our type N to BNC cable assemblies have a male gender on end 1 and male on end 2. This type N to BNC cable is a male to male coax assembly, PE3250-36, can also be known as a type N plug to BNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to BNC plug cable assembly PE3250-36 is built with RG316 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type N male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3250-36 can also be used in the other direction and will be BNC male to type N male cable assembly if the opposite connectivity is required. Type N plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to BNC male cable 36 inch length using RG316 coax.

1 : $70.69
25 : $67.16
50 : $63.62
100 : $60.79

PE3C3250-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male Right Angle to N Female Low Loss Test Cable 12 Inch Length Using PE-P300LL Coax., Radio frequency assembly SMA male right angle to N female low loss test cable 12 inch length using PE-P300LL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to N female low loss test cable 12 inch length using PE-P300LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with right angle SMA cable connection on one end and N type cable connection on the other. Our low loss test right angle SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to N type cable is a male to female coax assembly, PE3C3250-12, can also be known as a low loss test right angle SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE3C3250-12 is built with PE-P300LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA right angle male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3250-12 can also be used in the other direction and will be N type female to right angle SMA male cable assembly if the opposite connectivity is required. Low loss test SMA right angle plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to N female low loss test cable 12 inch length using PE-P300LL coax.

1 : $604.99
25 : $574.74
50 : $544.49

PE3C6352-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Fire Rated 4.3-10 Female to N Male Right Angle Low PIM Cable 50 cm Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated 4.3-10 female to N male right angle low PIM cable 50 cm length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated 4.3-10 female to N male right angle low PIM cable 50 cm length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310F-LP 4.3-10 to TC-SPO250-NM-RA-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310F-LP 4.3-10 cable connection on one end and right angle TC-SPO250-NM-RA-LP N type cable connection on the other. Our low PIM TC-SPP250-4310F-LP 4.3-10 to right angle TC-SPO250-NM-RA-LP type N cable assemblies have a female gender on end 1 and male on end 2. This TC-SPP250-4310F-LP 4.3-10 to TC-SPO250-NM-RA-LP N type cable is a female to male coax assembly, PE3C6352-50CM, can also be known as a low PIM TC-SPP250-4310F-LP 4.3-10 jack to right angle TC-SPO250-NM-RA-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310F-LP 4.3-10 jack to TC-SPO250-NM-RA-LP type N plug cable assembly PE3C6352-50CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310F-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310F-LP 4.3-10 to right angle TC-SPO250-NM-RA-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310F-LP 4.3-10 female to TC-SPO250-NM-RA-LP N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6352-50CM can also be used in the other direction and will be right angle TC-SPO250-NM-RA-LP type N male to TC-SPP250-4310F-LP 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-SPO250-NM-RA-LP type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310F-LP 4.3-10 to TC-SPO250-NM-RA-LP N type cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310F-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 4.3-10 female to N male right angle low PIM cable 50 cm length using SPF-250 coax using Times Microwave parts.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

PE3C7982-50CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.1/9.5 Mini DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Copper Clad Aluminum, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 19.68 inches. 4.1/9.5 Mini DIN Male to 4.1/9.5 Mini DIN Male Low PIM Cable 50 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN male low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN male low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.1/9.5 mini DIN cable connection on one end and a 4.1/9.5 mini DIN cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly has a male gender on end 1 and a male on end 2. PE3C7982-50CM can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.1/9.5 Mini DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C7982-50CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.1/9.5 Mini DIN male to 4.1/9.5 Mini DIN male cable has a maximum VSWR of 1.4:1. 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN plug cable assembly PE3C7982-50CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with copper clad aluminum plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.1/9.5 Mini DIN to 4.1/9.5 Mini DIN low PIM RF cable assembly as per your requirements.

1 : $89.89
25 : $85.4
50 : $80.9
100 : $77.31

PE3W05692-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. SMP Female Right Angle to SMA Female 2 Hole Flange Cable 50 cm Length Using PE-047SR Coax., Radio frequency assembly SMP female right angle to SMA female 2 hole flange cable 50 cm length using PE-047SR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female right angle to SMA female 2 hole flange cable 50 cm length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and SMA 2 hole flange cable connection on the other. Our right angle SMP to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMA cable is a female to female coax assembly, PE3W05692-50CM, can also be known as a right angle SMP jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA jack cable assembly PE3W05692-50CM is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP right angle female to SMA female 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05692-50CM can also be used in the other direction and will be SMA female 2 hole flange to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to SMA jack 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMA female 2 hole flange cable 50 cm length using PE-047SR coax.

1 : $177.99
25 : $169.09
50 : $160.19
100 : $153.07

PE3W22505

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SHV Plug to SHV Plug Right Angle Cable Using RG174 Coax. PE3W22505 is a SHV plug to SHV plug right angle cable using RG174 coax. This Pasternack SHV plug to SHV plug right angle cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm SHV for connector 2. SHV to SHV right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SHV to plug SHV right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22505 SHV plug to SHV plug right angle cable assembly is constructed with RG174 coax.

PE3W25016

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. Push-On SMP Female to SMA Female Bulkhead Cable Using RG178 Coax. PE3W25016 is a SMP female to SMA female bulkhead cable using RG178 coax. This Pasternack SMP female to SMA female bulkhead cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMA for connector 2. Our female SMP to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25016 SMP female to SMA female bulkhead cable assembly is constructed with RG178 coax.

Teledyne HiRel

5962-8752501M2A

Teledyne HiRel

FLIP-FLOP, D-TYPE, DUAL, WITH PRESET AND CLEAR AND TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

M38510/32501BRA

Teledyne HiRel

8-BIT REGISTER WITH CLEAR

QPV2500BL-20DI

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR
RoHS : Unknown

5962-8752501BDA

Teledyne HiRel

FLIP-FLOP, D-TYPE, DUAL, WITH PRESET AND CLEAR AND TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

QPV2500BQ-25KC

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

QPV2500L-30KI

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

5962-9222503MKA

Teledyne HiRel

BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant

QPV2500B-15KC

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

5962-8752501BCA

Teledyne HiRel

FLIP-FLOP, D-TYPE, DUAL, WITH PRESET AND CLEAR AND TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8762501FA

Teledyne HiRel

DATA SEL/MULTIPLEXER, DUAL 4-INPUT
RoHS : Not Compliant

5962-8762501EA

Teledyne HiRel

DATA SEL/MULTIPLEXER, DUAL 4-INPUT
RoHS : Not Compliant

5962-9222501M3A

Teledyne HiRel

BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant

QPV2500BQL-30KC

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

5962-9222505M3A

Teledyne HiRel

BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant

QPV2500BQ-25DC

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

Venkel Ltd.

C0201C0G250-0R8BNP

VENKEL LTD

Chip Capacitor;0201;C0G;25V;0.8pF;�0.1pF
RoHS : Compliant

30,000

PWCR0805-BK-8250DT

VENKEL LTD

Pulse Withstanding CR;0805;2/5W;�100PPM;825R;�0.5%
RoHS : Compliant

AGC0201C0G250-330JNP

VENKEL LTD

Auto Grade Capacitor;0201;C0G;25V;33pF;�5%
RoHS : Compliant

AGC0201X7R250-101KNP

VENKEL LTD

Auto Grade Capacitor;0201;X7R;25V;100pF;�10%
RoHS : Compliant

HPTF0603-QC-8250UT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�50PPM;825R;�0.01%
RoHS : Compliant

HPTF0603-QP-8250DT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�5PPM;825R;�0.5%
RoHS : Compliant

HPTF1210-UN-8250UT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�10PPM;825R;�0.01%
RoHS : Compliant

HPTF2010-UE-8250CT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�25PPM;825R;�0.25%
RoHS : Compliant

HPTF2010-UN-8250BT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�10PPM;825R;�0.1%
RoHS : Compliant

TFCR0603-10W-E-8250BT

VENKEL LTD

Thin Film CR;0603;1/10W;�25PPM;825R;�0.1%
RoHS : Compliant

TFCR0805-8W-K-8250DT-1K

VENKEL LTD

Thin Film CR;0805;1/8W;�100PPM;825R;�0.5%
RoHS : Compliant

AGC0402X7R250-332MNP

VENKEL LTD

Auto Grade Capacitor;0402;X7R;25V;3300pF;�20%
RoHS : Compliant

AGC0603X7R250-153MNP

VENKEL LTD

Auto Grade Capacitor;0603;X7R;25V;0.015uF;�20%
RoHS : Compliant

C01005HQN250-0R6BNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;25V;0.6pF;�0.1pF
RoHS : Compliant

C01005HQN250-5R1BNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;25V;5.1pF;�0.1pF
RoHS : Compliant

Waytek, Inc.

PET 3/4 BLACK 250'

Techflex Inc

Techflex PTN0.75BK-250 Standard Expandable Sleeving is black 3/4" braided polyester sleeving on a 250' spool. It features a 10 mil standard wall, fits recommended bundle sizes from 1/2" to 1-1/4", and is designed to slip over wire harnesses or tubing for abrasion protection and cable bundling.

250 : $0.335
1,250 : $0.3074

45,000

19125-0033

Molex

16-14 GA # 6 Flanged Block Spade Nylon Terminal w Sleeve BRASS EXTRA SLEEVE

50 : $0.3435
200 : $0.3253
500 : $0.3028
1,000 : $0.2908

14,926

19025-0005

Molex

12-10 GA Male Disconnect .250 X .032 Yellow Nylon Insulated
RoHS : Compliant

50 : $0.467
200 : $0.4454
500 : $0.4166
1,000 : $0.4004

6,247

5700250RD00R4

ShawCor Ltd

DSG-Canusa CPA-100 dual-wall heat shrink tubing is red adhesive-lined polyolefin tubing with a .250" size for sealing and protecting wires, splices, and terminals. Its dual-wall construction supports moisture resistance, abrasion protection, and durable environmental sealing in spool applications.

500 : $0.9001
2,500 : $0.8474

3,500

T250M0X2 111-25001

HellermannTyton

HellermannTyton T250M0X2 heavy-duty cable tie is a 22" long high-strength tie built for securing large wire bundles, hoses, and tubing. Its one-piece self-locking design supports fast installation and dependable hold in demanding electrical, industrial, and harness-routing applications.

25 : $2.0627
50 : $1.9272
100 : $1.768
200 : $1.7043
500 : $1.6326
1,000 : $1.5689

2,975

50250N

Hillsdale Terminal & Tool Inc

Nylon Ring Terminal 12-10 Gauge 5/16" Stud

50 : $0.1781
200 : $0.1616
500 : $0.1444
1,000 : $0.131
5,000 : $0.1248

2,830

T250R0X2 111-24801

HellermannTyton

HellermannTyton T250R0X2 heavy-duty cable tie is a 20" long high-strength tie built for securing large wire bundles, hoses, and tubing. Its one-piece self-locking design supports fast installation and dependable hold in demanding electrical, industrial, and harness-routing applications.

25 : $1.6545
50 : $1.5459
100 : $1.4182
200 : $1.3671
500 : $1.3095
1,000 : $1.2584

2,150

AL-08-250-SS-CT-C

Advanced Cable Ties Inc

ACT AL-08-250-SS-CT-C 316 coated stainless steel cable tie is a corrosion-resistant metal tie with 300 lb. tensile strength for securing wire bundles, hoses, and tubing in harsh environments. Its coated stainless construction supports durable fastening where heat, moisture, chemicals, or vibration are present.

100 : $1.9816
100 : $1.8691
200 : $1.827
500 : $1.7848
1,000 : $1.7567

700

OS69-18-250M

NSPA

22-18 GA Male Disconnect .250 X .032 Clear Heat Shrink 30713 30912 30981

20 : $0.7715
50 : $0.6875
100 : $0.6238
200 : $0.6035
500 : $0.5831
1,000 : $0.5601

514

4200250RD0048

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is red tubing with a 1/4" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

10 : $2.1507
50 : $1.858
100 : $1.6862
200 : $1.5462
500 : $1.4571

221

ANN-250

Eaton Electronics

250A Limiter ANN Fast Acting Fuse ANN-250

1 : $40.42
10 : $37.55
50 : $35.37
100 : $33.19
200 : $31.69
500 : $30.2

179

HDBB-505-1-250

3M HDBB-505-1-250 heat shrinkable cable breakout boot is a 5-way molded heat shrink shape for multiconductor armored or sheathed cables. It provides electrical and mechanical protection, uses adhesive-sealed polyolefin construction, and has 2.36"/0.96" outlet dimensions for larger breakout sealing.

1 : $139.79
5 : $133.6
10 : $128.29
25 : $121.21

SSR-125-004

Trombetta

Trombetta SSR-125-004 125A Solid State Relay

1 : $160.39
5 : $153.63
10 : $147.84
25 : $139.14

CCP0.75BK 250

Techflex Inc

Techflex CCP0.75BK 250 Clean Cut Expandable Braided Sleeving is black 3/4" polyester sleeving on a 250' spool. It resists fraying when cut with scissors, offers high abrasion resistance, and fits expansion ranges from 5/8" to 1" for clean harness bundling and protection without a hot knife.

250 : $0.719
1,250 : $0.6597

5551250RD0048

ShawCor Ltd

DSG-Canusa 5551250RD0048 CPA-300 heat shrink tubing is red adhesive-lined tubing with a 1.250" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing.

1 : $28.29
10 : $24.35
50 : $22.15
100 : $20.23
500 : $19.08