| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
Avnet Americas | HMHA2801R2
| onsemi | Optocoupler, Transistor Output, 1 Channel, SSOP, 4 Pins, 50 mA, 3.75 kV, 80 % - Tape and Reel (Alt: HMHA2801R2)
RoHS : Compliant | 40,000 : $0.14556
20,000 : $0.15115
10,000 : $0.15312
5,000 : $0.15513
2,500 : $0.15932
|
| 55,000
 |
ERJ-2RKF2802X
| Panasonic Electronic Components | SMD Chip Resistor, 28 kohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film - Tape and Reel (Alt: ERJ-2RKF2802X) | 160,000 : $0.00278
80,000 : $0.00284
40,000 : $0.00289
20,000 : $0.00295
10,000 : $0.003
|
| 50,000
|
SRR1280-220M
| Bourns Inc | - Tape and Reel (Alt: SRR1280-220M)
RoHS : Compliant | 6,400 : $0.44232
3,200 : $0.45338
1,600 : $0.46086
800 : $0.47153
400 : $0.56533
|
| 6,000
|
ERA-3AEB2800V
| Panasonic Electronic Components | - Tape and Reel (Alt: ERA-3AEB2800V)
RoHS : Compliant | | 5,000
|
RN50C2801FRE6
| Vishay Intertechnologies | Through Hole Resistor, 2.8 kohm, RN Series, 50 mW, ? 1%, Axial Leaded, 200 V, Metal Film, ? 50ppm/?C - Tape and Reel (Alt: RN50C2801FRE6)
RoHS : Not Compliant | | 1,000
|
4-794628-0
| TE Connectivity | - Tape and Reel (Alt: 4-794628-0)
RoHS : Compliant | 50,100 : $2.4832
25,050 : $2.496
10,050 : $2.5088
5,100 : $2.73494
150 : $3.189
|
| 900
|
PE-68280NL
| Pulse Electronics Corporation | Current Sense Transformer 1:1:100 500Vrms 1.15Prim. 930Sec. 15A Surface Mount - Trays (Alt: PE-68280NL)
RoHS : Compliant | 640 : $1.601
320 : $1.64839
160 : $1.67206
80 : $1.69642
40 : $1.73081
|
| 573
|
0097072802
| Qnity Laird | - Bulk (Alt: 0097072802)
RoHS : Compliant | 10,000 : $0.4439
5,000 : $0.44938
2,000 : $0.58354
1,000 : $0.9218
1 : $1.62727
|
| 280
|
RLR07C2802FSB14
| Vishay Intertechnologies | Through Hole Resistor, 28 kohm, RLR Series, 250 mW, ? 1%, Axial Leaded, 250 V, Metal Film - Bulk (Alt: RLR07C2802FSB14)
RoHS : Not Compliant | 20,000 : $0.46976
10,000 : $0.47834
5,000 : $0.5448
500 : $0.99446
1 : $3.2292
|
| 136
|
LFB259128-000
| Qnity Laird | Ferrite Core, Cylindrical, 62 Ohm, 28.58 mm Length, 12.83 mm ID, 25.91 mm OD - Bulk (Alt: LFB259128-000)
RoHS : Compliant | 201,600 : $1.80563
100,800 : $1.81503
50,400 : $1.82443
10,080 : $1.9291
168 : $2.44286
|
| 79
|
TGM-280NSLF
| Halo Electronics Inc | Power Transformer 3:8 1500Vrms Prim. Single Sec. Single Surface Mount - Rail/Tube (Alt: TGM-280NSLF)
RoHS : Compliant | 992 : $1.6199
496 : $1.62825
248 : $1.6366
124 : $1.64495
62 : $1.7523
|
| 30
|
5-146280-8
| TE Connectivity | - Bulk (Alt: 5-146280-8)
RoHS : Compliant | 250,000 : $0.45799
100,000 : $0.50353
50,000 : $0.5895
10,000 : $0.71761
1 : $0.93826
|
| 8
|
280
| 3M Interconnect | 280 - Cable Rools/Shrink Tubing (Alt: 7000126123)
RoHS : Not Compliant | 16 : $132.72668
8 : $138.37103
4 : $143.3484
2 : $148.32578
1 : $153.15382
|
| 0
|
280
| 3M Interconnect | 280 - Cable Rools/Shrink Tubing (Alt: 7010340908)
RoHS : Not Compliant | 16 : $382.53165
8 : $398.7992
4 : $413.1445
2 : $427.48978
1 : $441.40472
|
| 0
|
280
| 3M Interconnect | 280 - Bulk (Alt: 7000029633)
RoHS : Not Compliant | 16 : $198.99117
8 : $207.45348
4 : $214.91582
2 : $222.37817
1 : $229.61665
|
| 0
|
Newark | 200528-0110
| Molex | Conn, Ffc/Fpc, R/A, 11Pos, 1Row, 1Mm; |Molex 200528-0110
RoHS : Compliant | 3,000 : $2.24
9,000 : $2.2
15,000 : $2.15
|
| 12,000
|
200528-0110
| Molex | Conn, Ffc/Fpc, R/A, 11Pos, 1Row, 1Mm; |Molex 200528-0110
RoHS : Compliant | 1 : $3.19
10 : $3.03
25 : $2.85
50 : $2.65
100 : $2.55
250 : $2.4
500 : $2.35
1,000 : $2.3
|
| 2,613
|
MTLW-128-07-G-D-280
| Samtec Inc | .100 Low Prof Variab Post Hei Term Strip; |Samtec, Inc. MTLW-128-07-G-D-280
RoHS : Compliant | 1 : $8.18
5 : $8.05
10 : $7.92
25 : $7.75
50 : $7.64
100 : $6.67
250 : $6.54
|
| 429
|
ZW-09-15-G-S-280-280
| Samtec Inc | Conn Stack Brd, 2.54Mm, 9Pos, Hdr; |Samtec, Inc. ZW-09-15-G-S-280-280
RoHS : Compliant | 1 : $1.64
10 : $1.59
25 : $1.53
50 : $1.45
100 : $1.38
250 : $1.33
500 : $1.25
2,500 : $0.97
|
| 242
|
ZW-09-10-G-S-280-280
| Samtec Inc | Conn Stack Brd, 2.54Mm, 9Pos, Hdr; |Samtec, Inc. ZW-09-10-G-S-280-280
RoHS : Compliant | 1 : $1.82
10 : $1.76
25 : $1.69
50 : $1.6
100 : $1.52
250 : $1.47
500 : $1.39
2,500 : $1.07
|
| 242
|
MTSW-128-09-G-D-280
| Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 56Pos; |Samtec, Inc. MTSW-128-09-G-D-280
RoHS : Compliant | 1 : $5.51
5 : $5.47
10 : $5.43
25 : $5.39
50 : $5.22
100 : $4.9
250 : $4.8
|
| 192
|
MTSW-128-07-L-T-280
| Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 84Pos; |Samtec, Inc. MTSW-128-07-L-T-280
RoHS : Compliant | 1 : $6.51
5 : $6.48
10 : $6.44
25 : $6.26
50 : $6.06
100 : $5.57
250 : $5.56
|
| 179
|
280
| Switchcraft Conxall | Connector, Phone Audio, Plug, 2 Position; No. Of Contacts:2Contacts; Gender:Plug; Pin Diameter:6.35Mm; Connector Mounting:Cable Mount; Contact Plating:Nickel Plated Contacts; Connector Body Material:Metal Body; Product Range:- Rohs Compliant: Yes
RoHS : Compliant | 1 : $10.18
5 : $9.54
10 : $8.81
25 : $8.18
50 : $7.76
100 : $7.27
250 : $6.84
|
| 168
|
ZW-13-09-L-S-280-280
| Samtec Inc | Conn Stack Brd, 2.54Mm, 13Pos, Hdr; |Samtec, Inc. ZW-13-09-L-S-280-280
RoHS : Compliant | 1 : $1.77
10 : $1.71
25 : $1.66
50 : $1.62
100 : $1.57
250 : $1.53
500 : $1.48
2,500 : $1.19
|
| 161
|
MTMM-128-07-G-S-280
| Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 28Pos; |Samtec, Inc. MTMM-128-07-G-S-280
RoHS : Compliant | 1 : $4.94
5 : $4.93
10 : $4.92
25 : $4.91
50 : $4.69
100 : $4.53
250 : $4.44
|
| 117
|
ZW-36-15-G-S-280-280
| Samtec Inc | Conn Stack Brd, 2.54Mm, 36Pos, Hdr; |Samtec, Inc. ZW-36-15-G-S-280-280
RoHS : Compliant | 1 : $4.37
5 : $4.35
10 : $4.32
25 : $4.3
50 : $4.27
100 : $4.0
250 : $3.92
|
| 94
|
173109-0280
| Molex | Fct Dsub Idc Rcpt 15 Pn W/Clinch Rohs Compliant: Yes |Molex 173109-0280
RoHS : Compliant | 1 : $9.83
5 : $9.27
10 : $8.71
25 : $8.2
50 : $7.8
100 : $7.15
250 : $6.07
|
| 12
|
170280
| Brady Worldwide Inc | Safety Sign, Notice; |Brady 170280
RoHS : Not Compliant | 1 : $16.16
5 : $15.22
10 : $14.11
25 : $13.05
50 : $11.9
100 : $11.13
250 : $10.11
|
| 6
|
280
| Thomas & Betts | 3/4 In Stamped Steel Cover Form 8; |Abb Thomas & Betts 280
RoHS : Not Compliant | 25 : $16.93
50 : $15.36
100 : $14.07
250 : $13.07
500 : $12.21
|
| 0
|
280
| CEC Industries Ltd | T3 1/4 Wedge 10V .13A .85Cp |Cec Industries 280
RoHS : Not Compliant | 10 : $14.68
20 : $14.39
30 : $14.09
50 : $13.8
100 : $13.51
250 : $13.21
500 : $12.92
|
| 0
|
RS | 50372-8000 (50372-8000-CUT-TAPE)
| Molex | CRIMP TERMINAL, FEMALE, TIN PLATD,22-26AWG | 5 : $0.02
1,000 : $0.015
2,000 : $0.014
|
| 12,400
|
280
| Switchcraft Conxall | CONN AV PHONE PLUG 2 CONT SZ 1/4" INSULATED LITTEL-PLUG SOLDER LUG CLAMP
RoHS : Compliant | 1 : $8.64
25 : $7.95
50 : $7.43
100 : $7.04
250 : $6.65
|
| 80
|
1SNA115280R2000 (11528020)
| TE Connectivity | M2 5/6.4G.1 TERMINAL BLOCK, ENTRELEC | | 25
|
05028033001 (028033)
| Wera Werk Hermann Werner GmbH & Co. KG | 9 IP X 60MM SLOTTED DRIVER FOR TORX PLUS SCREWS, KRAFTFORM PLUS,300 SERIES | | 7
|
280
| T&B Fittings | CONDUIT BODY COVER, FORM 8, 3/4 INCH, STAMPED STEEL, WITH NEOPRENE GASKET | | 6
|
05066280001 (066280)
| Wera Werk Hermann Werner GmbH & Co. KG | 867/1 IP TORX PLUS SERIES,10 IP X 25MM BITS FOR TORX PLUS SOCKET SCREWS | | 6
|
05028071001 (028071)
| Wera Werk Hermann Werner GmbH & Co. KG | 367 HF IP TORX PLUS,25 X 300MM TORX DRIVER WITH HOLDING FUNCTION | | 4
|
05028055001 (028055)
| Wera Werk Hermann Werner GmbH & Co. KG | KRAFTFORM PLUS,300 SERIES,30 X 115MM TORX DRIVER WITH HOLDING FUNCTION | | 4
|
05028072001 (028072)
| Wera Werk Hermann Werner GmbH & Co. KG | 367 HF IP TORX PLUS,27 X 300MM TORX DRIVER WITH HOLDING FUNCTION | | 4
|
042028070 (04.20 28 07)
| Phoenix Mecano | BOX, METAL, ALUMINUM, GRAY, COVER INCLUDED, 11.024 L X 7.874 W X 2.854 | 1 : $135.07
5 : $121.56
10 : $114.81
|
| 3
|
28012055 (280.120.55 OR 280-120-55)
| WERMA SIGNALTECHNIK GMBH + CO KG | BEACON, ROTATING RED LED, 280 SERIES, SURFACE MOUNT, 24VDC | | 3
|
2801051 (CN-UB-280DC-3-SB)
| Phoenix Contact | SURGE PROTECTOR, FOR COAXIAL SIGNAL INTERFACES, N CONNECTOR PLUG/SOCKET | | 1
|
280
| RACO | 3-1/2" DEEP HUNG CEILING BOX 1/2"-3/4" KNOCKOUT | | 0
 |
280
| Apex Tool Group LLC | GEARWRENCH;BRK SPR TL BENDIX DRUM | | 0
|
280
| Adafruit Industries | USB/DC LITHIUM POLYMER BATTERY CHARGER 5-12V | 1 : $19.94
10 : $18.94
25 : $18.34
|
| 0
|
STMicroelectronics | BTA12-800BWRG
 | STMicroelectronics | 12A standard and Snubberless™ Triacs
RoHS : Compliant | 1 : $2.07
10 : $1.3
100 : $0.85
500 : $0.76
|
| 5,323
|
ULN2804A
 | STMicroelectronics | Eight Darlington Arrays
RoHS : Compliant | 1 : $3.29
10 : $1.79
100 : $1.37
500 : $1.3
|
| 5,280
|
ULQ2804A
| STMicroelectronics | Eight Darlington array
RoHS : Compliant | 1 : $5.33
10 : $3.16
100 : $2.51
500 : $2.07
|
| 5,066
|
ULQ2803A
| STMicroelectronics | Eight Darlington array
RoHS : Compliant | 1 : $3.36
10 : $1.94
100 : $1.52
500 : $1.23
|
| 4,195
|
STD2805T4
| STMicroelectronics | Low voltage fast-switching PNP power transistor
RoHS : Compliant | 1 : $1.62
10 : $1.03
100 : $0.68
500 : $0.6
|
| 1,600
|
BTA12-800CWRG
| STMicroelectronics | 12A standard and Snubberless™ Triacs
RoHS : Compliant | 1 : $2.21
10 : $1.45
100 : $1.05
500 : $0.83
|
| 904
|
BTB12-800CWRG
| STMicroelectronics | 12A standard and Snubberless™ Triacs
RoHS : Compliant | 1 : $1.96
10 : $1.29
100 : $0.93
500 : $0.74
|
| 859
|
ULQ2802A
| STMicroelectronics | Eight Darlington array
RoHS : Compliant | 1 : $2.29
10 : $1.56
100 : $1.32
500 : $1.27
|
| 642
|
ULN2801A
| STMicroelectronics | Eight Darlington Arrays
RoHS : Compliant | 1 : $5.81
10 : $3.66
100 : $2.83
500 : $2.37
|
| 567
|
ADP280120W3
| STMicroelectronics | Automotive-grade ACEPACK DRIVE power module, sixpack topology, 1200 V, 3.8 mOhm typ. SiC MOSFET gen.3 based
RoHS : Compliant | 1 : $1,144.49
10 : $1,144.49
|
| 2
|
ULQ2801A
| STMicroelectronics | Eight Darlington array
RoHS : Compliant | 1 : $5.16
10 : $3.63
100 : $3.14
500 : $3.04
|
| 0
|
ULN2803A
| STMicroelectronics | Eight Darlington Arrays
RoHS : Compliant | 1 : $2.27
10 : $1.78
100 : $1.33
500 : $1.08
|
| 0
|
RF2L24280CB4
| STMicroelectronics | 280 W, 28 V, 2.4 to 2.5 GHz RF Power LDMOS transistor
RoHS : Compliant | | 0
|
ULN2802A
| STMicroelectronics | Eight Darlington Arrays
RoHS : Compliant | 1 : $5.2
10 : $3.25
100 : $2.36
500 : $2.04
|
| 0
|
M74HC280YRM13TR
| STMicroelectronics | 9 Bit Parity Generator
RoHS : Compliant | 1 : $0.5
10 : $0.35
25 : $0.32
100 : $0.27
250 : $0.24
|
| 0
|
Microchip Technology Inc | MCP1703A-2802E/DB
| Microchip Technology Inc | LOWIQ 250MA LDO, VIN 16V MAX, VOUT=2.8V, SOT-223, Projected EOL: 2041-03-15
RoHS : Compliant | 5,000 : $0.56
1,000 : $0.59
100 : $0.64
25 : $0.7
1 : $0.84
|
| 16,848
|
HV2803/AHA
| Microchip Technology Inc | Low Harmonic Distortion, 32-ch SPST HV Analog SW, TFBGA, Projected EOL: 2045-12-18
RoHS : Compliant | 5,000 : $25.79
1,000 : $27.19
100 : $29.43
25 : $32.38
1 : $38.85
|
| 4,034
|
DSC1101DL5-052.8000
-2.50-mm-x-2.00-mm.jpg) | Microchip Technology Inc | MEMS OSC, LVCMOS, 52.8MHz, 10PPM, 2.5-3.3V, -40 to 105C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-03-28
RoHS : Compliant | 5,000 : $1.09
1,000 : $1.1
100 : $1.14
25 : $1.26
1 : $1.51
|
| 3,803
|
MIC5280YME
| Microchip Technology Inc | 120V, 25mA Low IQ LDO, SOIC, Projected EOL: 2036-05-07
RoHS : Compliant | 5,000 : $1.26
1,000 : $1.27
100 : $1.32
25 : $1.44
1 : $1.73
|
| 3,325
|
DSC1101NI5-012.8000
| Microchip Technology Inc | MEMS OSC, LVCMOS, 12.8MHz, 10PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2046-08-12
RoHS : Compliant | 5,000 : $1.22
1,000 : $1.24
100 : $1.28
25 : $1.41
1 : $1.69
|
| 2,000
|
DSC1101NI5-012.8000T
| Microchip Technology Inc | MEMS OSC, LVCMOS, 12.8MHz, 10PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2046-08-12
RoHS : Compliant | 5,000 : $1.22
1,000 : $1.24
100 : $1.28
25 : $1.41
1 : $1.69
|
| 2,000
|
PIC16F628-04E/SS
 | Microchip Technology Inc | No description available, SSOP, Projected EOL: 2036-01-01
RoHS : Compliant | 5,000 : $3.14
1,000 : $3.24
100 : $3.45
25 : $3.56
1 : $3.65
|
| 1,521
|
MIC280-6YM6-TR
| Microchip Technology Inc | 12-bit Local and Remote +/-4% -55C to +125C I2C Temperature Sensor, SOT-23, Projected EOL: 2036-04-15
RoHS : Compliant | 5,000 : $0.66
1,000 : $0.71
100 : $0.85
25 : $0.95
1 : $1.13
|
| 506
|
PIC16LF628-04I/P
| Microchip Technology Inc | MCU CMOS 18LD 2K FLASH, PDIP, Projected EOL: 2036-01-01
RoHS : Compliant | 5,000 : $3.14
1,000 : $3.24
100 : $3.45
25 : $3.55
1 : $3.65
|
| 450
|
PIC16F628-04I/P
| Microchip Technology Inc | 18LD 4MHZ 2K FLASH, PDIP, Projected EOL: 2036-01-01
RoHS : Compliant | 5,000 : $2.99
1,000 : $3.11
100 : $3.3
25 : $3.38
1 : $3.48
|
| 140
|
OX-228-0019-10M0000000
| Microchip Technology Inc | OX-228-0019-10M0000000, Projected EOL: 2051-05-16 - Contact for Pricing
RoHS : Compliant | | 58
|
PIC16F628-04E/P
| Microchip Technology Inc | No description available, PDIP, Projected EOL: 2036-01-01
RoHS : Compliant | 5,000 : $3.35
1,000 : $3.48
100 : $3.69
25 : $3.78
1 : $3.89
|
| 50
|
MAQ5280YME-EV
| Microchip Technology Inc | MAQ5280YME Evaluation Board, Projected EOL:
RoHS : Compliant | | 36
|
OX-228-0014-10M0000000
| Microchip Technology Inc | OX-228-0014-10M0000000, Projected EOL: 2051-02-13 - Contact for Pricing
RoHS : Compliant | | 21
|
OX-228-0012-10M0000000
| Microchip Technology Inc | OX-228-0012-10M0000000, Projected EOL: 2051-02-13 - Contact for Pricing | | 20
|
Bisco Industries | XB25280500VP
| SOCKET SCREWS | | | 2,300
|
0.128X0.280X.005TF
| WASHERS | | | 800
|
5280-0-43-01-16-27-40-0
| Mill-Max Mfg Corp |
RoHS : Not Compliant | | 380
|
562R280H03
| Fastener Technology Corp | | | 141
|
465-280
| Bivar Inc |
RoHS : Compliant | | 100
|
MS91528-0C3B
| Electronic Hardware Corporation (EHC) | | | 83
|
CA28085-4B-1
| Alcoa Fastening Systems Aerospace | | | 50
|
MS21280-22
| MS Bolts | | | 23
|
VA280-12.80ET4KSM
| Calmark | | | 15
|
MS91528-0G1G
| Electronic Hardware Corporation (EHC) | | | 11
|
C2807-30D
| Accuride International | | | 10
|
MS91528-0O3G
| Electronic Hardware Corporation (EHC) | | | 1
|
MS91528-0T3B
| Electronic Hardware Corporation (EHC) | | | 1
|
WV230CR2.80T2R
| Calmark | | | 1
|
XR0402806
| Colson Group | | | 1
|
ECCO | 0931028000
| ITT Interconnect Solutions | | | 289
|
217-3028-000-MS
| ITT Interconnect Solutions | | | 250
|
104-0280-000
| ITT Interconnect Solutions | | | 190
|
0110628000
| ITT Interconnect Solutions | | | 106
|
011-0628-000
| ITT Interconnect Solutions | | | 106
|
97-3108B-28(0850)
| Amphenol Industrial Operations | | | 92
|
97-3108B-28(0850)
| Amphenol Industrial Operations | | | 92
|
C10-752804-000
| Amphenol Industrial Operations | | | 90
|
10-765128-0102
| Amphenol Industrial Operations | | | 90
|
10-765128-0101
| Amphenol Industrial Operations | | | 39
|
DT80PW280D
| TDK-Lambda Corporation | | | 10
|
97-3101A-28(0850)
| Amphenol Industrial Operations | | | 4
|
97-3101A-28(0850)
| Amphenol Industrial Operations | | | 4
|
97-3106B-28(0850)
| Amphenol Industrial Operations | | | 3
|
217-3028-000
| ITT Interconnect Solutions | | | 1
|
Pasternack Enterprises US | PE3C2807/HS-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Low Loss Cable 36 Inch Length Using LMR-200-UF Coax with Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 36 inch length using LMR-200-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 36 inch length using LMR-200-UF coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C2807/HS-36 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2807/HS-36 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C2807/HS-36 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $121.99
10 : $119.55
25 : $117.11
100 : $114.67
|
| 363
|
PE3C2807-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Low Loss Cable 36 Inch Length Using LMR-200-UF Coax with Times Microwave Components., Radio frequency assembly N male to N male low loss cable 36 inch length using LMR-200-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 36 inch length using LMR-200-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2807-36 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C2807-36 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 36 inch length using LMR-200-UF coax with Times Microwave components. | 1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47
|
| 363
|
PE3M0280-6
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Size: 16, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, RF Cable Part Number: PE-P047, RF Cable Type: Coax, RF Cable Specification: PE-P047 datasheet, RF Cable Impedance : 50 Ohm. SMPS Size 16 D38999 Contact Pin to SMA Male Cable 6 Inch Length Using PE-P047 Coax with HeatShrink, LF Solder. The PE3M0280-6 from Pasternack is a D38999 contact cable assembly that is built with a size 16 SMPS pin contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This SMPS to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0280-6 RF cable has a FEP jacket of 0.056-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our SMPS pin to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and FEP dielectric type. The PE3M0280-6 between-series RF cable has 0.4 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. SMPS pin to SMA male cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack PE3M0280-6 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this SMPS to SMA RF cable are available on our downloadable PDF datasheet. SMPS pin to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of SMPS and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMPS to SMA RF cable assembly as per your requirements. | 1 : $177.99
10 : $170.87
25 : $163.75
100 : $156.63
|
| 0
|
PE3W21280
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. Limited Detent SMP Male Bulkhead to 2.92mm Male Cable Using PE-P086HF Coax. PE3W21280 is a SMP male bulkhead to 2.92mm male cable using PE-P086HF coax. This Pasternack SMP male bulkhead to 2.92mm male cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm 2.92mm for connector 2. Our male SMP bulkhead to male 2.92mm cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21280 SMP male bulkhead to 2.92mm male cable assembly is constructed with PE-P086HF coax. | | 0
|
PE3280LF-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to Mini UHF Male Cable 12 Inch Length Using RG223 Coax, RoHS., Radio frequency assembly N male to mini UHF male cable 12 inch length using RG223 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to mini UHF male cable 12 inch length using RG223 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to mini UHF cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and mini UHF cable connection on the other. Our N type to mini UHF cable assemblies have a male gender on end 1 and male on end 2. This N type to mini UHF cable is a male to male coax assembly, PE3280LF-12, can also be known as a type N plug to mini UHF plug cable assembly and will be shipped same-day as it is purchased. Type N plug to mini UHF plug cable assembly PE3280LF-12 is built with RG223 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to mini UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to mini UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3280LF-12 can also be used in the other direction and will be mini UHF male to type N male cable assembly if the opposite connectivity is required. Type N plug to mini UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to mini UHF cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to mini UHF male cable 12 inch length using RG223 coax, RoHS. | 1 : $52.29
25 : $49.68
50 : $47.06
100 : $44.97
|
| 0
|
PE3C2801-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to N Male Low Loss Cable 36 Inch Length Using PE-C240 Coax., Radio frequency assembly SMA male to N male low loss cable 36 inch length using PE-C240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 36 inch length using PE-C240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2801-36 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3C2801-36 is built with PE-C240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2801-36 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 36 inch length using PE-C240 coax. | 1 : $82.39
25 : $78.27
50 : $74.15
100 : $70.86
|
| 0
|
PE3C8280-60
| Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 60 inches. 4.1/9.5 Mini DIN Male to 4.3-10 Male Low PIM Cable 60 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to male coax assembly, PE3C8280-60, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly PE3C8280-60 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8280-60 can also be used in the other direction and will be 4.3-10 male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components. | 1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43
|
| 0
|
PE3W14280LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG303/U, RF Cable Type: RG303, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using RG303 Coax, LF Solder. PE3W14280LF is a N male right angle to N male right angle cable using RG303 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14280LF N male right angle to N male right angle cable assembly is constructed with RG303 coax. | | 0
|
PE33280/HS-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to MCX Plug Cable 24 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly SMA male to MCX plug cable 24 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to MCX plug cable 24 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MCX cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and MCX cable connection on the other. Our SMA to MCX cable assembly has male gender on end 1 and plug on end 2. PE33280/HS-24 can also be known as a SMA plug to MCX male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE dielectric type. SMA plug to MCX male cable assembly PE33280/HS-24 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MCX cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33280/HS-24 RF cable are available on our downloadable PDF datasheet.PE33280/HS-24 can also be used in the other direction and will be MCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. | 1 : $96.29
25 : $91.48
50 : $86.66
100 : $82.81
|
| 0
|
PE3C8280-48
| Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 48 inches. 4.1/9.5 Mini DIN Male to 4.3-10 Male Low PIM Cable 48 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to male coax assembly, PE3C8280-48, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly PE3C8280-48 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8280-48 can also be used in the other direction and will be 4.3-10 male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components. | 1 : $100.99
25 : $95.94
50 : $90.89
100 : $86.85
|
| 0
|
PE3C9280/HS
| Pasternack Enterprises | | | 0
|
PE3W12800LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 2.2-5 Male to QMA Male Cable Using TFT-5G-402 Coax, LF Solder. PE3W12800LF is a 2.2-5 male to QMA male cable using TFT-5G-402 coax. This Pasternack 2.2-5 male to QMA male cable assembly uses a 50 Ohm 2.2-5 for connector 1 and a 50 Ohm QMA for connector 2. Our male 2.2-5 to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12800LF 2.2-5 male to QMA male cable assembly is constructed with TFT-5G-402 coax. | | 0
|
PE3C9280
| Pasternack Enterprises | | | 0
|
PE3W03280
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. N Male to BNC Male Cable Using LMR-400-DB Coax., Radio frequency assembly N male to BNC male cable using LMR-400-DB coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to BNC male cable using LMR-400-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and BNC cable connection on the other. Our type N to BNC cable assemblies have a male gender on end 1 and male on end 2. This type N to BNC cable is a male to male coax assembly, PE3W03280, can also be known as a N type plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to BNC plug cable assembly PE3W03280 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this N type male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03280 can also be used in the other direction and will be BNC male to type N male cable assembly if the opposite connectivity is required. Type N plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to BNC male cable using LMR-400-DB coax. | | 0
|
PE3W08280/HS-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMP Female to SMA Male Right Angle Cable 24 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly SMP female to SMA male right angle cable 24 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMA male right angle cable 24 inch length using PE-SR405FLJ coax with heatshrink, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax formable cable assembly is built with SMP cable connection on one end and right angle SMA cable connection on the other. Our formable SMP to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W08280/HS-24 can also be known as a formable SMP jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA plug cable assembly PE3W08280/HS-24 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10 GHz maximum frequency SMP female to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08280/HS-24 can also be used in the other direction and will be right angle SMA male to SMP female cable assembly if the opposite connectivity is required. Formable SMP jack to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMA male right angle cable 24 inch length using PE-SR405FLJ coax with heatshrink. | 1 : $132.99
25 : $126.34
50 : $119.69
100 : $114.37
|
| 0
|
Teledyne HiRel | 5962-9152801MYA
| Teledyne HiRel | OR/NOR GATE, TRIPLE 5-INPUT
RoHS : Not Compliant | | 0
|
54F280DMQB
| Teledyne HiRel | PARITY GENERATOR/CHECKER, 9-BIT | | 0
|
5962-87628022A
 | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant | | 0
|
5962-8762801RA
 | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant | | 0
|
5962-9152801MXA
| Teledyne HiRel | OR/NOR GATE, TRIPLE 5-INPUT
RoHS : Not Compliant | | 0
|
5962-9452801QXA
 | Teledyne HiRel | FLIP-FLOP, D-TYPE, 16-BIT, TS
RoHS : Not Compliant | | 0
|
5962-8762802RA
| Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant | | 0
|
54F280LMQB
| Teledyne HiRel | PARITY GENERATOR/CHECKER, 9-BIT | | 0
|
5962-9152802MYA
| Teledyne HiRel | OR/NOR GATE, QUINT 2-INPUT
RoHS : Not Compliant | | 0
|
5962-9152802MXA
| Teledyne HiRel | OR/NOR GATE, QUINT 2-INPUT
RoHS : Not Compliant | | 0
|
5962-8762802SA
| Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant | | 0
|
5962-8762801SA
| Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant | | 0
|
54F280FMQB
| Teledyne HiRel | PARITY GENERATOR/CHECKER, 9-BIT | | 0
|
5962-87628012A
| Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant | | 0
|
Venkel Ltd. | SHPI121280H-150MU
| VENKEL LTD | Shielded High Power Inductor;121280;High Current;15uH;�20%
RoHS : Compliant | | 0
|
MELFC0102-RE-2801CT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�25PPM;2.8K;�0.25%
RoHS : Compliant | | 0
|
MELFC0102-UE-2801FT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�25PPM;2.8K;�1%
RoHS : Compliant | | 0
|
MELFC0102-YZ-2800FT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�15PPM;280R;�1%
RoHS : Compliant | | 0
|
MELFC0204-TC-2801DT
| VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�50PPM;2.8K;�0.5%
RoHS : Compliant | | 0
|
MELFC0204-ZC-2801BT
| VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�50PPM;2.8K;�0.1%
RoHS : Compliant | | 0
|
MELFC0207-VC-2802DT
| VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�50PPM;28K;�0.5%
RoHS : Compliant | | 0
|
MELFC0207-VN-2800CT
| VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�10PPM;280R;�0.25%
RoHS : Compliant | | 0
|
MELFC0207-XC-2803CT
| VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�50PPM;280K;�0.25%
RoHS : Compliant | | 0
|
MELFC0207-XN-2801BT
| VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�10PPM;2.8K;�0.1%
RoHS : Compliant | | 0
|
UPTF0805-10W-E-2800AT
| VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�25PPM;280R;�0.05%
RoHS : Compliant | | 0
|
UPTF0805-10W-E-2801AT-1K
| VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�25PPM;2.8K;�0.05%
RoHS : Compliant | | 0
|
UPTF0805-10W-P-2800UT-1K
| VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;280R;�0.01%
RoHS : Compliant | | 0
|
UPTF1206-8W-P-2802CT
| VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;28K;�0.25%
RoHS : Compliant | | 0
|
UPTF1206-8W-P-3280BT
| VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;328R;�0.1%
RoHS : Compliant | | 0
|
Waytek, Inc. | 19128-0023
| Molex | 16-14 GA #8 Spade Terminal Non-Insulated | 100 : $0.1067
200 : $0.0979
500 : $0.0908
1,000 : $0.0868
5,000 : $0.0839
|
| 18,768
|
19128-0021
| Molex | 16-14 GA #6 Spade Terminal Non-Insulated | 100 : $0.1082
200 : $0.0984
500 : $0.0879
1,000 : $0.0795
5,000 : $0.0759
|
| 16,722
|
T120S0K2 111-12803
| HellermannTyton | HellermannTyton T120S0K2 heavy-duty cable tie is a high-strength self-locking nylon tie with a 9" length for securing larger wire bundles, hoses, and tubing. Its one-piece heavy-duty design supports dependable hold and cleaner harness routing in demanding applications. | 50 : $0.2406
200 : $0.2287
500 : $0.2127
1,000 : $0.2037
|
| 15,850
|
19128-0055
| Molex | 16-14 GA #10 Spade Terminal Non-Insulated | 100 : $0.1006
200 : $0.0913
500 : $0.0816
1,000 : $0.0738
5,000 : $0.0704
|
| 7,309
|
10762803
| Aptiv PLC | Apex 2.8 16-14GA Female Term
RoHS : Compliant | 50 : $0.2293
200 : $0.2106
500 : $0.1899
1,000 : $0.1777
|
| 4,345
|
280756-4
| TE Connectivity | The TE Connectivity 280756-4 is a FASTIN-FASTON 375 series female quick disconnect terminal designed for reliable relay and harness connections. It accepts 1210 Ga. wire and mates with 0.375" (9.5 mm) tabs, providing secure electrical contact in high-current applications. Constructed from tin-plated phosphor bronze with an open-barrel F-crimp design, it ensures strong mechanical retention and excellent conductivity for automotive and industrial use.
RoHS : Compliant | 10 : $0.7073
50 : $0.6807
100 : $0.6587
200 : $0.6233
500 : $0.6012
1,000 : $0.5835
|
| 3,122
|
12162280
| Aptiv PLC | Aptiv 12162280 Metri-Pack 150.2 Series sealed connector is a 3-way female connector rated to 14A max. It is suited for space-limited in-line connections and low-energy electronic circuits, with a pull-to-seat design for high-demand sealed applications.
RoHS : Compliant | 5 : $2.1018
50 : $1.7778
100 : $1.683
200 : $1.5802
500 : $1.517
|
| 2,293
|
57280 OR 611-028
| Ideal Clamp Products Inc | Standard Stainless Steel Band Hose Clamp #28 Band 1/2" 1-1/4" TO 2-1/4" | 10 : $1.5879
50 : $1.4114
100 : $1.2807
200 : $1.2416
500 : $1.1958
1,000 : $1.15
|
| 782
|
7100164280
| 3M | 22-18 GA #6 Ring Terminal Heat Shrink Sealed | 25 : $0.8556
50 : $0.7618
100 : $0.6915
200 : $0.668
500 : $0.6446
1,000 : $0.6212
|
| 664
|
0828-030-Z-X-ISO-P
| Littelfuse Inc | 828 Series HV Bolt Down Fuse, 1000VDC, 30A disc way, no repl | 1 : $7.68
10 : $7.59
50 : $7.46
100 : $7.24
200 : $7.16
500 : $7.04
|
| 300
|
0828-025-Z-X-ISO-P
| Littelfuse Inc | 828 Series HV Bolt Down Fuse, 1000VDC, 25A disc way, no repl | 1 : $7.68
10 : $7.59
50 : $7.46
100 : $7.24
200 : $7.16
500 : $7.04
|
| 298
|
0828-015-Z-X-ISO-P
| Littelfuse Inc | 828 Series HV Bolt Down Fuse, 1000VDC, 15A disc way, no repl | 1 : $9.75
10 : $9.46
50 : $9.05
100 : $8.45
200 : $8.23
500 : $7.92
|
| 292
|
0828-020-Z-X-ISO-P
| Littelfuse Inc | 828 Series HV Bolt Down Fuse, 1000VDC, 20A disc way, no repl | 1 : $9.75
10 : $9.46
50 : $9.05
100 : $8.45
200 : $8.23
500 : $7.92
|
| 252
|
75228-03
| Littelfuse Inc | Littelfuse 75228-03 electric two-speed wiper switch controls one motor with dynamic parking at 12VDC. It features 3 positions, Off/Park-Low-High with push-to-wash, a zinc die-cast housing, six blade terminals, and an O-ring-sealed stem. | 1 : $43.12
5 : $38.5
10 : $35.93
50 : $33.87
100 : $32.34
200 : $30.8
|
| 70
|
Wuhan P&S | NCP115AMX280TCG
| onsemi | -
RoHS : Compliant | 1 : $0.1649
100 : $0.1053
500 : $0.0868
1,000 : $0.0798
|
| 5,000
|
10145028-030LF
| Amphenol FCi | Wire-to-board connector, socket, 30 positions, left and right double row | 1 : $5.58
100 : $2.24
500 : $2.07
1,000 : $2.01
|
| 5,000
|
HMHA2801R2
| onsemi | Phototransistor Optocouplers
RoHS : Compliant | 1 : $0.41
100 : $0.26
500 : $0.22
1,000 : $0.2
|
| 2,500
|
-2.50-mm-x-2.00-mm.jpg)
British ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
New Zealand