309-282F-R2 Price, Distributor, Stock

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male to BNC Male Low Loss Cable 36 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly TNC male to BNC male low loss cable 36 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to BNC male low loss cable 36 inch length using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a BNC cable connection on the other. Our low loss TNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C0309LF/HS-36 can also be known as a low loss TNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0309LF/HS-36 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our TNC male to BNC male cable has a maximum VSWR of 1.4:1. TNC plug to BNC plug cable assembly PE3C0309LF/HS-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0309LF/HS-36 can also be used in the other direction and will be a BNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $69.99
25 : $66.49
50 : $62.99
100 : $60.19

4,288

PE3C8309

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 4.3-10 Female Bulkhead to N Male Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 female bulkhead to N male low PIM cable using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 female bulkhead to N male low PIM cable using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 bulkhead cable connection on one end and a type N cable connection on the other. Our low PIM 4.3-10 to type N cable assembly has a female gender on end 1 and a male on end 2. PE3C8309 can also be known as a low PIM 4.3-10 jack to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.867-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8309 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our bulkhead 4.3-10 female to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 jack to type N plug cable assembly PE3C8309 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8309 can also be used in the other direction and will be a type N male to 4.3-10 female bulkhead cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack bulkhead to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements.

PE3C8309-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 4.3-10 Female Bulkhead to N Male Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 female bulkhead to N male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 female bulkhead to N male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 bulkhead cable connection on one end and a type N cable connection on the other. Our low PIM 4.3-10 to type N cable assembly has a female gender on end 1 and a male on end 2. PE3C8309-36 can also be known as a low PIM 4.3-10 jack to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.867-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8309-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our bulkhead 4.3-10 female to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 jack to type N plug cable assembly PE3C8309-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8309-36 can also be used in the other direction and will be a type N male to 4.3-10 female bulkhead cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack bulkhead to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements.

1 : $87.99
25 : $83.59
50 : $79.19
100 : $75.67

PE15A3309

Pasternack Enterprises

Key Specifications, Power Output: 22 dBm P1dB, Frequency, Min: 1 MHz, Frequency, Max: 3 GHz, Gain, Min: 16 dB, Gain, Typical: 21 dB, Noise Figure, Max: 4.5 dB, 3rd Intercept Point: 35 dB, Connector Series: SMA. 35 dBm IP3, 4 dB NF, 22 dBm P1dB, 1 MHz to 3 GHz, Low Noise Broadband Amplifier, 21 dB Gain, SMA. PE15A3309 low noise broadband amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This SMA broadband low noise amplifier has wide-band capability with a minimum frequency of 1 MHz and maximum frequency of 3 GHz. The minimum gain of this broad-band low noise radio frequency amplifier is 16 dB with a typical gain of 21 dB. Pasternack broadband low noise amplifier PE15A3309 is rated at 22 dBm P1dB. Our broad band low noise radio frequency amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial broadband low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $1,390.0
5 : $1,334.4
10 : $1,278.8

PE3C2309/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Low Loss Cable 12 Inch Length Using LMR-400 Coax with Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 12 inch length using LMR-400 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 12 inch length using LMR-400 coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C2309/HS-12 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3C2309/HS-12 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 12 inch length using LMR-400 coax with Times Microwave components with heatshrink.

1 : $107.99
25 : $102.59
50 : $97.19
100 : $92.87

PE3C2309LF/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Low Loss Cable 36 Inch Length Using LMR-400 Coax with Times Microwave Components with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 36 inch length using LMR-400 coax with Times Microwave components with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 36 inch length using LMR-400 coax with Times Microwave components with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C2309LF/HS-36 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C2309LF/HS-36 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 36 inch length using LMR-400 coax with Times Microwave components with heatshrink, LF solder.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

PE3C3098

Pasternack Enterprises

PE3W03098

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to BNC Female Bulkhead Cable Using RG316-DS Coax. PE3W03098 is a SMA male right angle to BNC female bulkhead cable using RG316-DS coax. This Pasternack SMA male right angle to BNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. SMA right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03098 SMA male right angle to BNC female bulkhead cable assembly is constructed with RG316-DS coax.

PE3W23092LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMP Female to SMA Male Cable Using PE-P086HF Coax, LF Solder. PE3W23092LF is a SMP female to SMA male cable using PE-P086HF coax. This Pasternack SMP female to SMA male cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMA for connector 2. Our female SMP to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W23092LF SMP female to SMA male cable assembly is constructed with PE-P086HF coax.

PE3C3094

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SSMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50. SSMB Plug to SSMB Jack Bulkhead Cable Using RG178 Coax. PE3C3094 is a SSMB plug to SSMB jack bulkhead cable using RG178 coax. This Pasternack SSMB plug to SSMB jack bulkhead cable assembly uses a 50 Ohm SSMB for connector 1 and a 50 Ohm SSMB for connector 2. Our plug SSMB to jack SSMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3094 SSMB plug to SSMB jack bulkhead cable assembly is constructed with RG178 coax.

PE3C3096/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Female to N Male Cable Using LMR-400-UF Coax with HeatShrink, LF Solder., Pasternack’s PE3C3096/BK/HS type N female to type N male RF cable assembly using LMR-400-UF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N female to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our type N to type N cable assembly has a female gender on end 1 and a male on end 2. PE3C3096/BK/HS can also be known as a type N jack to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3096/BK/HS RF cable has a tpe jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. This PE3C3096/BK/HS type N jack to type N plug cable assembly is built with LMR-400-UF, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C3096/BK/HS can also be used in the other direction and will be a type N male to type N female cable assembly if the opposite connectivity is required. This type N jack to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

PE3C3098/HS

Pasternack Enterprises

PE3093-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm, Length: 48 inches. SMA Male to SMA Female Cable 48 Inch Length Using 53 Ohm RG55 Coax., Radio frequency assembly SMA male to SMA female cable 48 inch length using 53 Ohm RG55 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 48 inch length using 53 Ohm RG55 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3093-48, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3093-48 is built with RG55 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3093-48 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 48 inch length using 53 Ohm RG55 coax.

1 : $47.99
25 : $45.59
50 : $43.19
100 : $41.27

PE3093LF-6

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm, Length: 6 inches. SMA Male to SMA Female Cable 6 Inch Length Using 53 Ohm RG55 Coax., Radio frequency assembly SMA male to SMA female cable 6 inch length using 53 Ohm RG55 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 6 inch length using 53 Ohm RG55 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3093LF-6, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3093LF-6 is built with RG55 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3093LF-6 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 6 inch length using 53 Ohm RG55 coax.

1 : $42.59
25 : $40.46
50 : $38.33
100 : $36.63

PE3097LF-60

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to BNC Male Cable 60 Inch Length Using RG214 Coax, RoHS., Radio frequency assembly N male to BNC male cable 60 inch length using RG214 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to BNC male cable 60 inch length using RG214 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and BNC cable connection on the other. Our type N to BNC cable assemblies have a male gender on end 1 and male on end 2. This N type to BNC cable is a male to male coax assembly, PE3097LF-60, can also be known as a type N plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to BNC plug cable assembly PE3097LF-60 is built with RG214 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency N type male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3097LF-60 can also be used in the other direction and will be BNC male to type N male cable assembly if the opposite connectivity is required. Type N plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to BNC male cable 60 inch length using RG214 coax, RoHS.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

TE Connectivity

63097-1

TE Connectivity

250 PL MKII REC. 18-14AWG TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 18 – 14 AWG Wire Size: .82 – 2.08 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 18 – 14 AWG .82 – 2.08 mm² | Quick Disconnect | Part Number: 63097-1 | Internal Number: 63097-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.15
100 : $0.2
10 : $0.24
1 : $0.31

16,074

5103309-1

TE Connectivity

A/L LOW PRO HDR 10P VERT BLACK Connector System: Wire-to-Board Number of Positions: 10 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 10 2.54 mm .1" | Ribbon Cable Connector | Part Number: 5103309-1 | Internal Number: 5103309-1 | TE Connectivity
RoHS : Compliant

100 : $1.15
10 : $1.37
1 : $1.6

10,980

2309411-1

TE Connectivity

DDR4 SODIMM 260P 8.0H STD DRAM Type: Small Outline (SO) Stack Height: .315 in Stack Height: 8 mm Module Orientation: Right Angle Number of Positions: 260 Small Outline (SO) .315" 8 mm Right Angle | So Dimm | Part Number: 2309411-1 | Internal Number: 2309411-1 | .315" | TE Connectivity
RoHS : Compliant

1,000 : $1.72
500 : $1.77
250 : $1.83
100 : $1.89
50 : $1.94
1 : $2.13

10,355

RQ73C2B309RBTD

TE Connectivity

RQ 1206 309R 0.1% 10PPM 5K RL Resistance Value: 309 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 1206 Surface Mount Resistor | 309 Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C2B309RBTD | Internal Number: 4-2176389-5 | TE Connectivity
RoHS : Compliant

2,500 : $0.86
1,000 : $0.88
500 : $0.9
250 : $0.93
100 : $0.95
50 : $0.97
25 : $1.0
10 : $1.02
1 : $1.04

7,291

30997

TE Connectivity

DG R 22-16 COMM 22-18 MIL10 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: #10 Closed Ring Tongue Terminal 22 AWG .3 – 1.42 mm² 509 – 3260 CMA | Ring Terminal | Part Number: 30997 | Internal Number: 30997 | TE Connectivity
RoHS : Compliant

500 : $1.39
250 : $1.44
100 : $1.49
50 : $1.53
25 : $1.58
10 : $1.63
1 : $1.68

3,769

2309410-1

TE Connectivity

DDR4 SODIMM 260P 5.2H RVS DRAM Type: Small Outline (SO) Stack Height: .205 in Stack Height: 5.2 mm Module Orientation: Right Angle Number of Positions: 260 200 Small Outline (SO) .205" 5.2 mm Right Angle | So Dimm | Part Number: 2309410-1 | Internal Number: 2309410-1 | .205" | TE Connectivity
RoHS : Compliant

1,000 : $1.32
500 : $1.36
250 : $1.4
100 : $1.44
50 : $1.49
1 : $1.63

3,724

RP73PF2A309RBTDF

TE Connectivity

RP 2A 0.25W 309R 0.1% 25PPM 1K RL Resistance Value: 309 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 309 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF2A309RBTDF | Internal Number: 6-2176091-9 | TE Connectivity
RoHS : Compliant

500 : $0.42
250 : $0.43
100 : $0.44
50 : $0.46
25 : $0.47
10 : $0.49
1 : $0.5

1,755

215309-9

TE Connectivity

2X9P HV100 REC CON. TE, 8.5MM PCB Header & Receptacle | Part Number: 215309-9 | Internal Number: 215309-9 | TE Connectivity
RoHS : Compliant

2,500 : $3.55
1,000 : $3.65
500 : $3.74
250 : $3.84
100 : $3.93
50 : $4.03
25 : $4.13
10 : $4.22
1 : $4.32

1,562

RP73PF2A309KBTDF

TE Connectivity

RP 2A 0.25W 309K 0.1% 25PPM 1K RL Resistance Value: 309K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 309K Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF2A309KBTDF | Internal Number: 4-2176094-0 | TE Connectivity
RoHS : Compliant

500 : $0.42
250 : $0.43
100 : $0.44
50 : $0.46
25 : $0.47
10 : $0.49
1 : $0.5

1,510

640309-3

TE Connectivity

UMNL PIN 12-10 PTPPHBZ Contact Mating Area Plating Material: Tin (Sn) Contact Type: Pin Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 12 – 10 AWG Operating Voltage: 600 VAC Tin (Sn) Pin Pre-Tin 12 – 10 AWG | Connector Contact | Part Number: 640309-3 | Internal Number: 640309-3 | Alias Number: 500-020-1738 | TE Connectivity
RoHS : Compliant

1,000 : $0.25
100 : $0.34
10 : $0.42
1 : $0.53

1,281

2309873-2

TE Connectivity

6POS,NANOMQS,REC HSG ASSY,COD B Nominal Voltage Architecture: 12 V Number of Positions: 6 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Board Wire-to-Wire Mating Tab Width: .5 mm Nanomqs 0.50 Mm Connector | 12 V 6 Housing for Female Terminals Wire-to-Board | Part Number: 2309873-2 | Internal Number: 2309873-2 | .5 mm | TE Connectivity
RoHS : Compliant

2,500 : $0.91
1,000 : $1.14
500 : $1.37
250 : $1.73
100 : $2.28
50 : $2.73

1,243

RQ73C1E309RBTD

TE Connectivity

RQ 0402 309R 0.1% 10PPM 5K RL Resistance Value: 309 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 309 Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C1E309RBTD | Internal Number: 8-2176362-6 | TE Connectivity
RoHS : Compliant

2,500 : $0.73
1,000 : $0.75
500 : $0.77
250 : $0.79
100 : $0.81
50 : $0.83
25 : $0.85
10 : $0.87
1 : $0.89

700

2309567-1

TE Connectivity

12G SAS REC RIGHT ANGLE CONNECTOR SAS Connector Type: SAS Connector & Housing Type: Receptacle Connector System: Board-to-Board Number of Positions: 68 Number of Rows: 2 SAS Receptacle Board-to-Board 68 | Sas & Mini-Sas Connector | Part Number: 2309567-1 | Internal Number: 2309567-1 | TE Connectivity
RoHS : Compliant

1,000 : $10.32
500 : $10.61
250 : $10.94
100 : $11.31
50 : $11.64
1 : $12.77

333

5103309-8

TE Connectivity

A/L LOW PRO HDR 40P VERT BLACK Connector System: Wire-to-Board Number of Positions: 40 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 40 2.54 mm .1" | Ribbon Cable Connector | Part Number: 5103309-8 | Internal Number: 5103309-8 | TE Connectivity
RoHS : Compliant

1,000 : $4.86
500 : $4.99
250 : $5.15
100 : $5.32
50 : $5.48
1 : $6.01

210

RQ73C1J309RBTD

TE Connectivity

RQ 0603 309R 0.1% 10PPM 5K RL Resistance Value: 309 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0603 Surface Mount Resistor | 309 Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C1J309RBTD | Internal Number: 8-2176369-6 | TE Connectivity
RoHS : Compliant

2,500 : $0.65
1,000 : $0.67
500 : $0.69
250 : $0.71
100 : $0.72
50 : $0.74
25 : $0.76
10 : $0.78
1 : $0.79

Venkel Ltd.

MELFC0102-RC-3092FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�50PPM;30.9K;�1%
RoHS : Compliant

MELFC0102-RE-3090FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�25PPM;309R;�1%
RoHS : Compliant

MELFC0102-RZ-3092CT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�15PPM;30.9K;�0.25%
RoHS : Compliant

MELFC0102-YK-3093FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�100PPM;309K;�1%
RoHS : Compliant

MELFC0204-TE-3090CT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�25PPM;309R;�0.25%
RoHS : Compliant

MELFC0204-TZ-3090DT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�15PPM;309R;�0.5%
RoHS : Compliant

MELFC0204-ZZ-3090BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�15PPM;309R;�0.1%
RoHS : Compliant

MELFC0207-VE-3091CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�25PPM;3.09K;�0.25%
RoHS : Compliant

MELFC0207-VZ-3091DT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�15PPM;3.09K;�0.5%
RoHS : Compliant

MELFC0207-XE-3092BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�25PPM;30.9K;�0.1%
RoHS : Compliant

MELFC0207-XZ-3092CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�15PPM;30.9K;�0.25%
RoHS : Compliant

MELFM0207-VC-3090DT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�50PPM;309R;�0.5%
RoHS : Not Compliant

CR1206-4W-3094DT

VENKEL LTD

Chip Resistor;1206;1/4W;3.09M;�0.5%
RoHS : Compliant

CRG0201-N-3092FT

VENKEL LTD

RoHS 10/10 Green CR;0201;1/20W;30.9K;�1%
RoHS : Compliant

CRS0603-10W-3092FT

VENKEL LTD

Anti-Sulfuration CR;0603;1/10W;30.9K;�1%
RoHS : Compliant

Vyrian

MAX3097EEEE

Maxim Integrated Products

Line Receiver, 3 Func, 3 Rcvr, CMOS, PDSO16
RoHS : Not Compliant

12,822

MAX6309EUK39D1+T

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +3.9V, CMOS, PDSO5
RoHS : Compliant

12,053

MAX6309UK35D4+T

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +3.5V, CMOS, PDSO5
RoHS : Compliant

12,018

MAX6309EUK28D3+T

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +2.8V, CMOS, PDSO5
RoHS : Compliant

11,823

MAX6309UK29D1+T

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +2.9V, CMOS, PDSO5
RoHS : Compliant

11,403

LTC3309AHV#WTRPBF

Analog Devices Inc

Switching Regulator, Current-mode, 10.1A, 3000kHz Switching Freq-Max, CMOS
RoHS : Compliant

9,895

MAX1309ECM-V

Analog Devices (Maxim Integrated)

9,090

MAX3093EESE

Maxim Integrated Products

Line Receiver, 4 Func, 4 Rcvr, CMOS, PDSO16
RoHS : Not Compliant

8,781

LT3094HDD#PBF

Analog Devices Inc

Adjustable Negative LDO Regulator, 0V Min, 19.5V Max, 0.41V Dropout, BIPolar, PDSO12
RoHS : Compliant

8,640

MAX6309EUK45D4+T

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +4.5V, CMOS, PDSO5
RoHS : Compliant

8,564

MAX6309UK46D2+T

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +4.63V, CMOS, PDSO5
RoHS : Compliant

8,181

MAX3094EEUE+T

Analog Devices Inc

Line Receiver, 4 Func, 4 Rcvr, CMOS, PDSO16
RoHS : Compliant

7,087

LTC3309AHV#TRMPBF

Analog Devices Inc

Switching Regulator, Current-mode, 10.1A, 3000kHz Switching Freq-Max, CMOS
RoHS : Compliant

6,890

MAX3095CEE+

Analog Devices Inc

Line Receiver, 4 Func, 4 Rcvr, BICMOS, PDSO16
RoHS : Compliant

6,498

MAX6309UK25D3-T

Maxim Integrated Products

Power Supply Support Circuit, Fixed, 1 Channel, +2.5VV, CMOS, PDSO5
RoHS : Not Compliant

5,846

Wuhan P&S

59453-091110EDHLF

Amphenol FCi

FFC/FPC CONN,9P,0.5mm,Lower Contact,ZIF
RoHS : Compliant

1 : $0.6014
100 : $0.2406
500 : $0.2225
1,000 : $0.2165

80,000

SMMBFJ309LT1G

onsemi

SS SOT23 JFET NCH 25V TR
RoHS : Compliant

1 : $0.28
100 : $0.18
500 : $0.15
1,000 : $0.14

51,000

309-282F-R2 Distributor

Link URL