| Electronic Components Datasheet Search |
|
3403L-AE2-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Ameya Holding Limited | MC3403DR2G![]() | onsemi | MC Series 0.6 V/us 36 V SMT Single Supply Quad Operational Amplifier - SOIC-14 RoHS : Compliant | 130,000 | ||
| ESR03EZPF3403 | ROHM Semiconductor | RoHS : Compliant |
| 25,000 | ||
ESR10EZPF3403![]() | ROHM Semiconductor | RES SMD 340K OHM 1% 0.4W 0805 RoHS : Compliant |
| 15,000 | ||
| KTR10EZPF3403 | ROHM Semiconductor | RES SMD 340K OHM 1% 1/8W 0805 RoHS : Compliant |
| 10,000 | ||
| KTR03EZPF3403 | ROHM Semiconductor | KTR Series 0603 340 kOhm ±1 % 0.1 W ±100 ppm/°C SMT Thick Film Resistor RoHS : Compliant |
| 10,000 | ||
![]() NexGen Digital | RN55C3403F | Vishay Huntington | 15,968 | |||
| NRC04F3403TRF | Nichicon Corporation | 10,000 | ||||
| 3403.0163.24 | Schurter Electronic Components | RoHS : Compliant | 6,000 | |||
| 73403-5562 | Molex | RoHS : Compliant | 4,950 | |||
| 3403.0163.11 | Schurter Electronic Components | RoHS : Compliant | 4,300 | |||
MC3403DR2G![]() | onsemi | RoHS : Compliant | 49 | |||
![]() PEI Genesis | B0816034036 | Amphenol PCD |
| 0 | ||
| DDM43403-65 | ITT Interconnect Solutions |
| 0 | |||
| SE1C3403ES-2.0-12 | SOURIAU-SUNBANK |
| 0 | |||
| SE1CR3403A-3.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| SE1CR3403ES-2.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| 103-3502-0513-403 | Dialight |
| 0 | |||
| 125-5710-1133-403 | Dialight |
| 0 | |||
| S4393-40-34 | SOURIAU-SUNBANK |
| 0 | |||
| SE16C3403A3.0ES34 | SOURIAU-SUNBANK |
| 0 | |||
| SE6CR3403A3.0-12 | SOURIAU-SUNBANK |
| 0 | |||
| 131-3403-016 | Johnson Components | RoHS : Compliant |
| 0 | ||
| 23A03403-1020 | SOURIAU-SUNBANK |
| 0 | |||
| S4603CS3403L34-6 | SOURIAU-SUNBANK |
| 0 | |||
| SE6CR3403A2.0-12 | SOURIAU-SUNBANK |
| 0 | |||
| 134-0334-200 | Dialight |
| 0 | |||
![]() Powell Electronics | 1-2340321-4 | TE Connectivity | Connectors |
| 25,562 | |
| 2-1734035-2 | TE Connectivity | I/O Connectors RoHS : Compliant |
| 5,544 | ||
| 9-2340321-3 | TE Connectivity | Electronic Component |
| 4,879 | ||
| 2343403-1 | TE Connectivity | Lighting Connectors RoHS : Compliant |
| 4,312 | ||
| 2-2340324-1 | TE Connectivity | Cable Connectors RoHS : Compliant |
| 1,191 | ||
| TMM-134-03-G-S | Samtec Inc | Low Profile Tiger Eye Header Strips, 2.0 RoHS : Compliant |
| 209 | ||
| ZW-08-20-G-S-340-340 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 158 | ||
| TW-34-03-G-D-312-112 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 73 | ||
| T3403420U | Amphenol Corporation | Connector RoHS : Compliant |
| 69 | ||
| 135-3403-101 | Johnson Components | MMCX Assembly, Plug Right Angle Cabled, RoHS : Compliant |
| 55 | ||
| TW-34-03-L-T-160-170 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 32 | ||
| 88-463403-03P | Amphenol Corporation | RECEPT |
| 4 | ||
| 88-463403-35S | Amphenol Corporation | RECEPT |
| 4 | ||
| 88-463403-35X | Amphenol Corporation | RECEPT |
| 3 | ||
| 21-33403-542 | Amphenol Corporation | FILTER RECEPTACLE |
| 1 | ||
![]() Richardson RFPD | R573403300 | Radiall | RF Switch SP3T 0MHz to 18GHz 60dB RoHS : Not Compliant |
| 0 | |
| R573403625 | Radiall | RF Switch SP6T 0MHz to 18GHz 60dB RoHS : Not Compliant |
| 0 | ||
| PSIUU63-403-1 | Wall Industries Inc | Wall Industries, Inc. up to 63 Watts, AC/DC Switch RoHS : Compliant | 0 | |||
| R573403445 | Radiall | RF Switch SP4T 0MHz to 18GHz 60dB RoHS : Not Compliant |
| 0 | ||
| PSIUU63-403 | Wall Industries Inc | Wall Industries, Inc. up to 63 Watts, AC/DC Switch RoHS : Compliant | 0 | |||
| 253-40-34 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
| R573403315 | Radiall | RF Switch SP3T 0MHz to 18GHz 60dB RoHS : Not Compliant |
| 0 | ||
| R573403810 | Radiall | RF Switch SP8T 0MHz to 18GHz 60dB RoHS : Compliant | 0 | |||
| 131-3403-016 | Cinch Connectivity Solutions | Conn SMB PL 0Hz to 4GHz 50Ohm Crimp ST Cable Mount RoHS : Compliant |
| 0 | ||
| 133-3403-106 | Cinch Connectivity Solutions | Conn MCX PL 0Hz to 6GHz 50Ohm Crimp RA Cable Mount RoHS : Compliant |
| 0 | ||
| R573403225 | Radiall | RF Switch SP12T 0MHz to 12.4GHz 60dB RoHS : Not Compliant |
| 0 | ||
| 23033403 | HUBER+SUHNER | Straight Bulkhead Cable Feed Through RoHS : Compliant |
| 0 | ||
| R573403010 | Radiall | RF Switch SP10T 0MHz to 18GHz 55dB RoHS : Not Compliant |
| 0 | ||
| R573403335 | Radiall | RF Switch SP3T 0MHz to 18GHz 60dB RoHS : Not Compliant |
| 0 | ||
| R573403520 | Radiall | RF Switch SP5T 0MHz to 18GHz 60dB RoHS : Not Compliant |
| 0 | ||
![]() Rutronik | 3403.0166.24 | Schurter Electronic Components | UMT250 1A 250V SMT RoHS : Compliant |
| 96,000 | |
| CR32-3403-FY | ASJ Holdings Limited | RC1206 340K 1% 0,25W TK100 RoHS : Compliant |
| 60,000 | ||
| 3403.0169.24 | Schurter Electronic Components | UMT250 2A 250V SMT SLOW RoHS : Compliant |
| 38,000 | ||
| 3403.0173.24 | Schurter Electronic Components | UMT250 5A 250V SMT SLOW IEC RoHS : Compliant |
| 28,000 | ||
| 3403.0176.24 | Schurter Electronic Components | UMT250 10A 250V SMT SLOW IEC/UL RoHS : Compliant |
| 18,000 | ||
| 3403.0172.24 | Schurter Electronic Components | UMT250 4A 250V SMT SLOW IEC/UL RoHS : Compliant |
| 10,000 | ||
| 3403.0286.23 | Schurter Electronic Components | UMT-H 16A 277VAC/250VDC SLOW RoHS : Compliant |
| 9,000 | ||
| 3403.0168.24 | Schurter Electronic Components | UMT250 1.6A 250V SMT slow IEC RoHS : Compliant |
| 6,000 | ||
| 3403.0170.24 | Schurter Electronic Components | UMT250 2.5A 250V SMT SLOW IEC RoHS : Compliant |
| 4,000 | ||
| 3403.0019.24 | Schurter Electronic Components | OMF250 2A 250V SMT FAST RoHS : Compliant |
| 4,000 | ||
| 3403.0164.24 | Schurter Electronic Components | UMT250 0.63A slow 250V SMT RoHS : Compliant |
| 1,847 | ||
| 3403.0279.23 | Schurter Electronic Components | UMT-H 3.15A 277VAC/250VDC S RoHS : Compliant |
| 1,500 | ||
| 3403.0129.11 | Schurter Electronic Components | OMT 0,75A 250V SMT SLOW RoHS : Compliant |
| 600 | ||
| 3403.0287.11 | Schurter Electronic Components | UMT-H 20A 277VAC/250VDC SLOW RoHS : Compliant |
| 200 | ||
| 3403.0163.11 | Schurter Electronic Components | UMT250 0.5A 250V SMT RoHS : Compliant |
| 4 | ||
![]() EBV Elektronik | MC3403DT![]() | STMicroelectronics | Operational Amplifier 4 Channels 1 MHz 05 Vs 3V to 36V 15V to 18V SOIC 14 Pins (Alt: MC3403DT) RoHS : Compliant | 0 | ||
MC3403DR2G![]() | onsemi | Operational Amplifier Single Supply Quad ONSSPCAPLFRS (Alt: MC3403DR2G) RoHS : Compliant | 0 | |||
| TLP3403(TP,F(O | Toshiba America Electronic Components | Optocoupler DCIN 1CH DCOUT 4Pin VSON Embossed TR (Alt: TLP3403(TP,F(O) RoHS : Compliant | 0 | |||
| TLP3403R(TP,F(O | Toshiba America Electronic Components | Relay SSR 6V DCIN 1A 20V DCOUT 4Pin VSONR TR (Alt: TLP3403R(TP,F(O) RoHS : Compliant | 0 | |||
![]() ECCO | 040-0034-032 | ITT Interconnect Solutions |
| 45 | ||
| 0400034032 | ITT Interconnect Solutions |
| 45 | |||
![]() Maritex | 3403.0156.24 | Schurter Electronic Components | Piezoelectric switch; 16.2mm; for PCB; aluminium; blue; IP67. RoHS : Compliant |
| 4,000 | |
| 3403.0160.24 | Schurter Electronic Components | SMD fuse; time-lag T; 250mA; 250V AC/125V DC; 10.1�3�3mm; -55+125 deg.C RoHS : Compliant |
| 4,000 | ||
| 3403.0162.24 | Schurter Electronic Components | SMD fuse; time-lag T; 400mA; 250V AC/125V DC; 10.1�3�3mm; -55+125 deg.C RoHS : Compliant |
| 4,000 | ||
| 3403.0170.24 | Schurter Electronic Components | SMD fuse; time-lag T; 2.5A; 250V AC/125V DC; 10.1�3�3mm; -55+125 deg.C RoHS : Compliant |
| 4,000 | ||
| 3403.0173.24 | Schurter Electronic Components | SMD fuse; time-lag T; 5A; 250V AC/125V DC; 10.1�3�3mm; -55+125 deg.C RoHS : Compliant |
| 4,000 | ||
| 3403.0174.24 | Schurter Electronic Components | SMD fuse; time-lag T; 6.3A; 250V AC/125V DC; 10.1�3�3mm; -55+125 deg.C RoHS : Compliant |
| 4,000 | ||
| 3403.0172.24 | Schurter Electronic Components | SMD fuse; time-lag T; 4A; 250V AC/125V DC; 10.1�3�3mm; -55+125 deg.C RoHS : Compliant |
| 3,998 | ||
| 3403.0166.24 | Schurter Electronic Components | SMD fuse; time-lag T; 1A; 250V AC/125V DC; 10.1�3�3mm; -55+125 deg.C RoHS : Compliant |
| 3,990 | ||
| WR06X3403FTL | Walsin Technology Corporation | Surface Mount Resistors; WR06X3403FTL; WALSIN; 340 k?; 1 %; Surface Mount; Yes RoHS : Compliant |
| 3,186 | ||
| 3403.0168.11 | Schurter Electronic Components | Ceramic fuse; SMD; time-lag;10,1x3x3mm 1,6A; 250VAC; 125VDC; RoHS : Compliant |
| 3,000 | ||
| 3403.0169.11 | Schurter Electronic Components | SMD fuse; time-lag T; 2A; 250V AC/125V DC; 10.1�3�3mm; -55+125 deg.C RoHS : Compliant |
| 600 | ||
| 3403.0166.11 | Schurter Electronic Components | SMD fuse; time-lag T; 1A; 250V AC/125V DC; 10.1�3�3mm; -55+125 deg.C RoHS : Compliant |
| 500 | ||
| 3403.0167.11 | Schurter Electronic Components | SMD fuse; time-lag T; 1.25A; 250V AC/125V DC; 10.1�3�3mm; -55+125 deg.C RoHS : Compliant |
| 500 | ||
| 3403.0171.11 | Schurter Electronic Components | SMD fuse; time-lag T; 3.15A; 250V AC/125V DC; 10.1�3�3mm; -55+125 deg.C RoHS : Compliant |
| 500 | ||
| 26-03-4030 | Molex | Crimp terminal housing; pitch 3.96mm; 3-contacts; female; applicable wire AWG#18-24; 250V/7A RoHS : Compliant |
| 200 | ||
![]() Pasternack Enterprises US | PE34036/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Male to 75 Ohm BNC Male Cable Using 75 Ohm RG187 Coax with HeatShrink., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable using 75 Ohm RG187 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male cable using 75 Ohm RG187 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE34036/HS can also be known as a BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE34036/HS RF cable has a PTFE jacket of 0.102-inch diameter. The flexible RF cable has an in-series connection. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE34036/HS is built with RG187 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. | 434 | ||
| PE34036/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 12 Inch Length Using 75 Ohm RG187 Coax with HeatShrink., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 12 inch length using 75 Ohm RG187 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male cable 12 inch length using 75 Ohm RG187 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE34036/HS-12 can also be known as a BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE34036/HS-12 RF cable has a PTFE jacket of 0.102-inch diameter. The flexible RF cable has an in-series connection. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE34036/HS-12 is built with RG187 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 191 | ||
| PE34036/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 36 Inch Length Using 75 Ohm RG187 Coax with HeatShrink., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG187 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG187 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE34036/HS-36 can also be known as a BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE34036/HS-36 RF cable has a PTFE jacket of 0.102-inch diameter. The flexible RF cable has an in-series connection. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE34036/HS-36 is built with RG187 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 63 | ||
| PE34036/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length, Max: 48 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 48 Inch Length Using 75 Ohm RG187 Coax with HeatShrink., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 48 inch length using 75 Ohm RG187 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male cable 48 inch length using 75 Ohm RG187 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE34036/HS-48 can also be known as a BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE34036/HS-48 RF cable has a PTFE jacket of 0.102-inch diameter. The flexible RF cable has an in-series connection. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE34036/HS-48 is built with RG187 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 47 | ||
| PE3C3403 | Pasternack Enterprises | 0 | ||||
| PE3C3403LF-72 | Pasternack Enterprises |
| 0 | |||
| PE3W03403/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to Reverse Polarity TNC Plug Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to reverse polarity TNC plug low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to reverse polarity TNC plug low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and reverse polarity a TNC cable connection on the other. Our low loss a SMA to reverse polarity a TNC cable assembly has male gender on end 1 and plug on end 2. PE3W03403/HS can also be known as a low loss SMA plug to reverse polarity TNC male cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03403/HS RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to reverse polarity TNC male cable assembly PE3W03403/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03403/HS can also be used in the other direction and will be reverse polarity TNC plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC reverse polarity male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W10340-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMB Plug Right Angle Cable 36 Inch Length Using RG196 Coax., Radio frequency assembly SMA male to SMB plug right angle cable 36 inch length using RG196 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMB plug right angle cable 36 inch length using RG196 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMB cable connection on the other. Our SMA to right angle SMB cable assemblies have a male gender on end 1 and plug on end 2. PE3W10340-36 can also be known as a SMA plug to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB male cable assembly PE3W10340-36 is built with RG196 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA male to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10340-36 can also be used in the other direction and will be right angle SMB plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMB plug right angle cable 36 inch length using RG196 coax. |
| 0 | ||
| PE3W13403LF-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 7/16 DIN Male to HN Female Cable 48 Inch Length Using RG214 Coax, LF Solder., Radio frequency assembly 7/16 DIN male to HN female cable 48 inch length using RG214 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to HN female cable 48 inch length using RG214 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 7/16 DIN cable connection on one end and a HN cable connection on the other. Our 7/16 DIN to HN cable assembly has a male gender on end 1 and a female on end 2. PE3W13403LF-48 can also be known as a 7/16 DIN plug to HN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13403LF-48 RF cable has a PVC jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -20 to 80 degrees C. The flexible RF cable has a between series connection. Our 7/16 DIN male to HN female cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to HN jack cable assembly PE3W13403LF-48 is built with RG214 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to HN cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W13403LF-48 can also be used in the other direction and will be a HN female to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to HN jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to HN cable assembly for quick shipment worldwide. Variations of 7/16 DIN and HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to HN RF cable assembly as per your requirements. |
| 0 | ||
| PE3W13403LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 7/16 DIN Male to HN Female Cable 12 Inch Length Using RG214 Coax, LF Solder., Radio frequency assembly 7/16 DIN male to HN female cable 12 inch length using RG214 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to HN female cable 12 inch length using RG214 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 7/16 DIN cable connection on one end and a HN cable connection on the other. Our 7/16 DIN to HN cable assembly has a male gender on end 1 and a female on end 2. PE3W13403LF-12 can also be known as a 7/16 DIN plug to HN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13403LF-12 RF cable has a PVC jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -20 to 80 degrees C. The flexible RF cable has a between series connection. Our 7/16 DIN male to HN female cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to HN jack cable assembly PE3W13403LF-12 is built with RG214 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to HN cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W13403LF-12 can also be used in the other direction and will be a HN female to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to HN jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to HN cable assembly for quick shipment worldwide. Variations of 7/16 DIN and HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to HN RF cable assembly as per your requirements. |
| 0 | ||
| PE34035LF/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Male to BNC Male Low Loss Cable 60 Inch Length Using PE-P195 Coax with HeatShrink, LF Solder., Radio frequency assembly BNC male to BNC male low loss cable 60 inch length using PE-P195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 60 inch length using PE-P195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE34035LF/HS-60 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE34035LF/HS-60 RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE34035LF/HS-60 is built with PE-P195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3403-60 | Pasternack Enterprises |
| 0 | |||
| PE3W03403/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to Reverse Polarity TNC Plug Low Loss Cable 200 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to reverse polarity TNC plug low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to reverse polarity TNC plug low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and reverse polarity a TNC cable connection on the other. Our low loss a SMA to reverse polarity a TNC cable assembly has male gender on end 1 and plug on end 2. PE3W03403/HS-200CM can also be known as a low loss SMA plug to reverse polarity TNC male cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03403/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to reverse polarity TNC male cable assembly PE3W03403/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03403/HS-200CM can also be used in the other direction and will be reverse polarity TNC plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC reverse polarity male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C3403-24 | Pasternack Enterprises |
| 0 | |||
| PE3C3403LF-48 | Pasternack Enterprises |
| 0 | |||
![]() Sager | 3403 | Keystone Electronics Corp | Standoffs & Spacers RD ALUM 6 X .125 |
| 0 | |
| 3403 | C&K Switches | Switch Hardware CHAS FA3X17.5 |
| 0 | ||
| AW-34-03-G-D-125-075 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| AW-34-03-G-D-170-075 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-34-03-L-D-250-120 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-34-03-L-D-312-065-ES | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FTSH-134-03-F-DV-ES-A | Samtec Inc | Headers & Wire Housings High Reliability Header Strips, .050 pitch RoHS : Compliant |
| 0 | ||
| EMOLD0340322P | ABB Group | Thomas & Betts |
| 0 | ||
| ESQT-134-03-F-D-408 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-134-03-L-Q-070 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-134-03-S-D-070 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| A63403P22 | ABB Group | CANNON CONNECTOR, 27 PIN 90 |
| 0 | ||
| IUGHF666-33340-30 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| 9763403027 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9763403072 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() TE Connectivity | 1734035-3 | TE Connectivity | MINI USB, TYPE B, R/A, SMT USB Type: B Connector Profile: Mini USB Version: 2.0 Connector & Housing Type: Receptacle Number of Positions: 5 B Mini 2.0 Receptacle | Usb Connector | Part Number: 1734035-3 | Internal Number: 1734035-3 | TE Connectivity RoHS : Compliant |
| 25,345 | |
| 1734035-2 | TE Connectivity | MINI USB, TYPE B, R/A, SMT USB Type: B Connector Profile: Mini USB Version: 2.0 Connector & Housing Type: Receptacle Number of Positions: 5 B Mini 2.0 Receptacle | Usb Connector | Part Number: 1734035-2 | Internal Number: 1734035-2 | TE Connectivity RoHS : Compliant |
| 12,619 | ||
| 1734035-1 | TE Connectivity | MINI USB, TYPE B, R/A, SMT USB Type: B Connector Profile: Mini USB Version: 2.0 Connector & Housing Type: Receptacle Number of Positions: 5 B Mini 2.0 Receptacle | Usb Connector | Part Number: 1734035-1 | Internal Number: 1734035-1 | TE Connectivity RoHS : Compliant |
| 3,645 | ||
| 2340331-1 | TE Connectivity | RECE CONN ASSY,56 POS, SLIVER HVM 0.062 Internal I/O Connector Type: TE Sliver Connector Mates With: PCB Edge Card PCB Mount Orientation: Straddle Mount Industry Standard: Gen-Z Number of Positions: 56 TE Sliver PCB Edge Card Straddle Mount Gen-Z | Internal I/o Connector | Part Number: 2340331-1 | Internal Number: 2340331-1 | TE Connectivity RoHS : Compliant |
| 1,820 | ||
| 2340321-1 | TE Connectivity | ASSY STRADDLE MOUNT 168P 062 SLIVER 2.0 Internal I/O Connector Type: Sliver for SFF-TA-1002 Connector Mates With: PCB Edge Card PCB Mount Orientation: Straddle Mount Industry Standard: Gen-Z OCP NIC 3.0 Number of Positions: 168 Sliver for SFF-TA-1002 PCB Edge Card Straddle Mount Gen-Z | Internal I/o Connector | Part Number: 2340321-1 | Internal Number: 2340321-1 | TE Connectivity RoHS : Compliant |
| 1,524 | ||
| 1734037-7 | TE Connectivity | Champ 050 series,68pos,Au over PdNi PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Number of Positions: 68 PCB Mount Receptacle Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 1734037-7 | Internal Number: 1734037-7 | Alias Number: CC7080-000 | TE Connectivity RoHS : Compliant |
| 1,269 | ||
| 1734037-5 | TE Connectivity | Champ 050 series,50pos,Au over PdNi PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Number of Positions: 50 PCB Mount Receptacle Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 1734037-5 | Internal Number: 1734037-5 | TE Connectivity RoHS : Compliant |
| 1,100 | ||
| 1734037-4 | TE Connectivity | Champ 050 series,40pos,Au over PdNi PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Number of Positions: 40 PCB Mount Receptacle Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 1734037-4 | Internal Number: 1734037-4 | TE Connectivity RoHS : Compliant |
| 505 | ||
| 2-2340321-1 | TE Connectivity | ASSY STRADDLE MOUNT 168P 093 SLIVER 2.0 Internal I/O Connector Type: Sliver for SFF-TA-1002 Connector Mates With: PCB Edge Card PCB Mount Orientation: Straddle Mount Industry Standard: OCP NIC 3.0 Gen-Z Number of Positions: 168 Sliver for SFF-TA-1002 PCB Edge Card Straddle Mount OCP NIC 3.0 | Internal I/o Connector | Part Number: 2-2340321-1 | Internal Number: 2-2340321-1 | TE Connectivity RoHS : Compliant |
| 357 | ||
| 1-1734037-0 | TE Connectivity | Champ 050 series 100pos,Au over PdNi PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Number of Positions: 100 PCB Mount Receptacle Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 1-1734037-0 | Internal Number: 1-1734037-0 | TE Connectivity RoHS : Compliant |
| 270 | ||
| 1734037-1 | TE Connectivity | Champ 050 series,80pos,Au over PdNi PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Number of Positions: 80 PCB Mount Receptacle Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 1734037-1 | Internal Number: 1734037-1 | TE Connectivity RoHS : Compliant |
| 193 | ||
| 2-2340324-1 | TE Connectivity | ASSY STRADDLE MOUNT 140P 093 SLIVER 2.0 Internal I/O Connector Type: Sliver for SFF-TA-1002 Connector Mates With: PCB Edge Card PCB Mount Orientation: Straddle Mount Industry Standard: Gen-Z OCP NIC 3.0 Number of Positions: 140 Sliver for SFF-TA-1002 PCB Edge Card Straddle Mount Gen-Z | Internal I/o Connector | Part Number: 2-2340324-1 | Internal Number: 2-2340324-1 | TE Connectivity RoHS : Compliant |
| 175 | ||
| 1-1734037-6 | TE Connectivity | Champ 050 series 160pos,Au over PdNi PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Number of Positions: 160 PCB Mount Receptacle Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 1-1734037-6 | Internal Number: 1-1734037-6 | TE Connectivity RoHS : Compliant |
| 119 | ||
| 2343403-1 | TE Connectivity | RECEPTACLE, LUMAWISE ENDURANCE S, KEYED Lighting Product Type: Shorting Cap Primary Product Color: Black Product Height: 29.6 mm Lighting Connector Features Included: Keyed Not Vented Compatible With Agency/Standards Products: UL Shorting Cap Black 29.6 mm Keyed | Street Lighting Connector | Part Number: 2343403-1 | Internal Number: 2343403-1 | TE Connectivity RoHS : Compliant |
| 103 | ||
| 1-2308340-3 | TE Connectivity | FULL METAL HOODS SIZE 1-3 (RAW 180 DEG) Connector Backshell Product Style: Shielded Connector Backshell Product Type: Backshell Primary Product Material: Zinc Body Orientation: Straight Compatible With Connector Shell Size: 1 Shielded Backshell Zinc Straight | D-Sub Backshell Size 1 | Part Number: 1-2308340-3 | Internal Number: 1-2308340-3 | TE Connectivity RoHS : Compliant |
| 43 | ||
![]() Venkel Ltd. | MELFC0207-VK-3403FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�100PPM;340K;�1% RoHS : Compliant | 0 | ||
| MELFC0207-XE-3403FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�25PPM;340K;�1% RoHS : Compliant | 0 | |||
| PWCR2010-WK-3403FT | VENKEL LTD | Pulse Withstanding CR;2010;3/4W;�100PPM;340K;�1% RoHS : Compliant | 0 | |||
| CR0805-8W-3403FT | VENKEL LTD | Chip Resistor;0805;1/8W;340K;�1% RoHS : Compliant | 0 | |||
| HPTF0805-TE-3403AT | VENKEL LTD | High Power Thin Film CR;0805;1/4W;�25PPM;340K ;�0.05% RoHS : Compliant | 0 | |||
| HPTF1210-UN-3403DT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�10PPM;340K ;�0.5% RoHS : Compliant | 0 | |||
| AGCR0603-TK-3403FT | VENKEL LTD | Auto Grade Resistor;0603;1/4W;�100PPM;340K;�1% RoHS : Compliant | 0 | |||
| UPTF1206-8W-N-3403DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;10PPM;340K ;�0.5% RoHS : Compliant | 0 | |||
| PWCR2512-ZK-3403DT | VENKEL LTD | Pulse Withstanding CR;2512;1.5W;�100PPM;340K;�0.5% RoHS : Compliant | 0 | |||
| PWCR1206-UK-3403FT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;340K;�1% RoHS : Compliant | 0 | |||
| HPTF1210-UC-3403CT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�50PPM;340K ;�0.25% RoHS : Compliant | 0 | |||
| HPTF2010-UN-3403UT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�10PPM;340K ;�0.01% RoHS : Compliant | 0 | |||
| TFCR0603-16W-E-3403BT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;340K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-C-3403CT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�50PPM;340K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR2010-4W-K-3403FT | VENKEL LTD | Thin Film CR;2010;1/4W;�100PPM;340K ;�1% RoHS : Compliant | 0 | |||
![]() Waytek, Inc. | 0340302111 | The Bosch Group | 30 mm Signal Warning Lamp Switch, 12V, Warning Hazard |
| 4 | |
![]() Win Source Electronics | AO3403 | Alpha & Omega Semiconductor | MOSFET P-CH 30V 2.6A SOT23 RoHS : Compliant |
| 330,043 | |
| 3403.0169.24 | Schurter Electronic Components | FUSE BOARD MNT 2A 250VAC 125VDC RoHS : Compliant |
| 35,705 | ||
| 1734035-2 | TE Connectivity | CONN RCPT USB2.0 MINI B SMD R/A / USB - mini B USB 2.0 Receptacle Connector 5 Position Surface Mount, Right Angle RoHS : Compliant |
| 18,500 | ||
| 3403.0166.24 | Schurter Electronic Components | FUSE BOARD MNT 1A 250VAC 125VDC RoHS : Compliant |
| 16,676 | ||
| AP7340-33FS4-7 | Diodes Incorporated | 150mA HIGH PSRR LOW NOISE LDO WITH ENABLE | IC REG LINEAR 3.3V 150MA 4DFN RoHS : Compliant |
| 12,120 | ||
| MX34036NF2 | JAE Electronics | CONN HEADER R/A 36POS 2.2MM / Connector Header Through Hole, Right Angle 36 position 0.087" (2.20mm) |
| 6,880 | ||
| MX34032NF2 | JAE Electronics | CONN HEADER R/A 32POS 2.2MM / Compact Automotive Connectors for PCB-to-Cable Applications |
| 4,500 | ||
| MX34032SF1 | JAE Electronics | CONN SOCKET 32POS HOUSING 2.2MM / 32 Rectangular Connectors - Housings Receptacle Gray 0.087" (2.20mm) |
| 4,405 | ||
| 7443340330 | Wurth Elektronik | FIXED IND 3.3UH 14A 6.5 MOHM SMD / POWER-CHOKE WE-HCC 8070 (Ferrite) RoHS : Compliant |
| 4,080 | ||
| 2-2340321-1 | TE Connectivity | CONN EDGE DUAL FML 168POS 0.024 / 168 Position Female Connector Non Specified - Dual Edge Gold 0.024" (0.60mm) Black RoHS : Compliant |
| 3,900 | ||
| 1-1734037-0 | TE Connectivity | CONN BTB RCPT 100POS R/A SOLDER / RECEPTACLE ASSEMBLY, R/A, BTB, CHAMP.050, SERIES 1 RoHS : Compliant |
| 2,773 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |