| Electronic Components Datasheet Search |
|
461L-AF5-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | TLE49461LHALA1 | Infineon Technologies AG | Hall Effect Sensor 20mA Bipolar Latch 3.3V/5V/9V/12V/15V 3-Pin SSO T/R - Ammo Pack (Alt: TLE49461LHALA1) RoHS : Compliant | 0 | ||
| DWM-04-61-L-D-805 | Samtec Inc | Board Stackers & Spacers, Pin Header, 20.45 mm, 8 Contacts, Solder, 2 Rows, 1.27 mm, DWM Series - Bulk (Alt: DWM-04-61-L-D-805) RoHS : Compliant |
| 0 | ||
| LY E67F-ABBB-46-1-L | ams OSRAM Group | POWER TOPLED - Tape and Reel (Alt: Q65111A3240) RoHS : Not Compliant |
| 0 | ||
| CMB02E-24-61L(PCA) | Amphenol Corporation | CMB02E-24-61L(PCA) - Bulk (Alt: CMB02E-24-61L(PCA)) RoHS : Not Compliant |
| 0 | ||
| LY T66F-ABBB-46-1-L-Z | ams OSRAM Group | - Tape and Reel (Alt: Q65110A8570) RoHS : Compliant |
| 0 | ||
| DWM-14-61-L-D-804 | Samtec Inc | Board Stackers & Spacers, Pin Header, 20.42 mm, 28 Contacts, Solder, 2 Rows, 1.27 mm, DWM Series - Rail/Tube (Alt: DWM-14-61-L-D-804) RoHS : Compliant |
| 0 | ||
| SMBZ1461LT1G | onsemi | - Bulk (Alt: SMBZ1461LT1G) RoHS : Not Compliant | 0 | |||
| DWM-04-61-L-S-750 | Samtec Inc | - Bulk (Alt: DWM-04-61-L-S-750) RoHS : Compliant |
| 0 | ||
| DWM-34-61-L-D-767 | Samtec Inc | Board Stackers & Spacers, Pin Header, 19.48 mm, 68 Contacts, Solder, 2 Rows, 1.27 mm, DWM Series - Rail/Tube (Alt: DWM-34-61-L-D-767) RoHS : Compliant |
| 0 | ||
| PLT0603Z2461LBTS | Vishay Intertechnologies | SMD Chip Resistor, 2.46 kohm, ? 0.01%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PLT Series - Custom Tape W/Leader (Alt: PLT0603Z2461LBTS) RoHS : Not Compliant |
| 0 | ||
| PLT1206Z2461LBTS | Vishay Intertechnologies | SMD Chip Resistor, 2.46 kohm, ? 0.01%, 400 mW, 1206 [3216 Metric], Thin Film, Precision, PLT Series - Custom Tape W/Leader (Alt: PLT1206Z2461LBTS) RoHS : Not Compliant |
| 0 | ||
| DWM-14-61-L-S-787 | Samtec Inc | - Rail/Tube (Alt: DWM-14-61-L-S-787) RoHS : Compliant |
| 0 | ||
| U773GA461L2071 | Amphenol Corporation | 1X4 SFP28 CAGE, EMI FINGERS - Trays (Alt: U773GA461L2071) RoHS : Not Compliant |
| 0 | ||
| R125461L01 | Radiall | NO_DICO_0004665 C1 - Bulk (Alt: R125461L01) RoHS : Not Compliant |
| 0 | ||
| DWM-04-61-L-D-840 | Samtec Inc | - Bulk (Alt: DWM-04-61-L-D-840) RoHS : Compliant |
| 0 | ||
![]() Newark | DWM-14-61-L-S-787 | Samtec Inc | Conn Stack Brd, 1.27Mm, 14Pos, Hdr; |Samtec, Inc. DWM-14-61-L-S-787 RoHS : Compliant |
| 107 | |
| DWM-14-61-L-D-599 | Samtec Inc | Conn Stack Brd, 1.27Mm, 28Pos, Hdr; |Samtec, Inc. DWM-14-61-L-D-599 RoHS : Compliant |
| 95 | ||
| DWM-14-61-L-D-744 | Samtec Inc | Conn Stack Brd, 1.27Mm, 28Pos, Hdr; |Samtec, Inc. DWM-14-61-L-D-744 RoHS : Compliant |
| 95 | ||
| DWM-14-61-L-D-900 | Samtec Inc | Conn Stack Brd, 1.27Mm, 28Pos, Hdr; |Samtec, Inc. DWM-14-61-L-D-900 RoHS : Compliant |
| 95 | ||
| DWM-34-61-L-D-767 | Samtec Inc | Conn Stack Brd, 1.27Mm, 68Pos, Hdr; |Samtec, Inc. DWM-34-61-L-D-767 RoHS : Compliant |
| 44 | ||
| 1461L | Keystone Electronics Corp | Insulated Shorting Pin, Blue; |Keystone 1461L RoHS : Not Compliant |
| 0 | ||
| OPB461L11 | TT Electronics OPTEK Technology | Optoswitch; Sensor Output Type:Open Collector; Product Range:Photologic Opb460 Series; Output Current:14Μa; Supply Voltage Dc Max:16V; Supply Voltage Dc Min:4.5V Rohs Compliant: Yes |Tt Electronics/optek Technology OPB461L11 RoHS : Compliant |
| 0 | ||
| WA23-461L | Daniels Manufacturing Corporation (DMC) | Locator; |Daniels WA23-461L RoHS : Not Compliant |
| 0 | ||
| HBL5461LA | Hubbell Wiring Device-Kellems | Sgl Rcpt, Ind Grd, 20A 250V, 6-20R, La; |Hubbell Wiring Devices HBL5461LA RoHS : Not Compliant |
| 0 | ||
| WA23-461LS | Daniels Manufacturing Corporation (DMC) | Locator (Steel); |Daniels WA23-461LS RoHS : Not Compliant |
| 0 | ||
| SNAP5461LATR | Hubbell Wiring Device-Kellems | Snapconnect Single Tr 20A/250V La; |Hubbell Wiring Devices SNAP5461LATR RoHS : Not Compliant |
| 0 | ||
| U773GA461L2071 | Amphenol Communications Solutions | 1X4 Sfp28 Cage, Emi Fingers; |Amphenol Communications Solutions U773GA461L2071 RoHS : Not Compliant |
| 0 | ||
| CMB02E-24-61L(PCA) | Amphenol Industrial Operations | Conn Rcpt; |Amphenol Industrial CMB02E-24-61L(PCA) RoHS : Not Compliant |
| 0 | ||
![]() RS | 1461L | Keystone Electronics Corp | MICRO PINS,.04",SHORTING PLUG,.25" WIDE, BRASS PIN, GOLD FINISH, BLUE RoHS : Compliant |
| 0 | |
| 1461-LC | Leviton Manufacturing Co | CL SW SP LITED TGL 15A-120VAC |
| 0 | ||
| A25461L | Apex Tool Group LLC | MANUAL UNWRAP TOOL,20-26 AGW, LH |
| 0 | ||
| 461L100G | B&B Electronics Manufacturing Company | TIMING BELT, 1.000" BELT WIDTH, 123 TEETH, 46.125" PITCH LENGTH, SINGLE SIDED |
| 0 | ||
| 461L075G | B&B Electronics Manufacturing Company | TIMING BELT, 0.750" BELT WIDTH, 123 TEETH, 46.125" PITCH LENGTH, SINGLE SIDED |
| 0 | ||
| OPB461L11 | TT Electronics OPTEK Technology | SENSOR, PHOTOLOGIC, SLOTTED OPTICAL SWITCH, NPN, 3.18MM, 4.5 TO 16VDC, 7.5 MA RoHS : Compliant |
| 0 | ||
| 65863461LF | Amphenol FCi | 65863-461LF-QKE HDR |
| 0 | ||
| F39-EJ0461-L | OMRON Industrial Automation | F39-EJ0461-L |
| 0 | ||
| SNAP5461LATR | Hubbell Wiring Device-Kellems | SNAPCONNECT SINGLE TR 20A/250V LA |
| 0 | ||
| U773GA461L2071 | Amphenol Commercial | 1X4 SFP28 CAGE, EMI FINGERS |
| 0 | ||
| ARM11AA1-461-LZA-P | SMC Corporation of America | MANIFOLD REGULATOR, COMPACT, UPPER HANDLE, 4 STATIONS, 3/8 IN/ 5/32 OUT |
| 0 | ||
| 2455R 9082-461 L25C | Honeywell Sensing and Control | SPST NC 10 A THERMOSTAT, SOLDER TAG TERMINATION |
| 0 | ||
| 2463746-1 (L000968-01) | TE Connectivity | Connector Assembly, 8 Coaxial Contacts, 3.94mm, Horizontal, NanoRF, PCB |
| 0 | ||
| F003461 (LT-H-0500-S 0000R10KX00) | GEFRAN spa | LINEAR POTENTIOMETER WITH SHAFT |
| 0 | ||
| LT-2561-733-024 (GLT-00107461 | LT-2561-733-024 | LT2561733024) | Carling Technologies | SWITCH;TOGGLE;ILLUMINATED ACTUATOR ;LT SERIES |
| 0 | ||
![]() Rochester Electronics | SMBZ1461LT1G | onsemi | Zener Regulating Diode, 0.225W, SOT23 RoHS : Compliant |
| 57,000 | |
| CY8CTMA461LWS-13 | Infineon Technologies AG | CY8CTMA461 - TrueTouch Multi-Touch All-Points Touchscreen Controller RoHS : Compliant |
| 3,867 | ||
| MC3461L | Motorola Mobility LLC | Current Sense Amplifier Single-Ended 16-DIP RoHS : Not Compliant |
| 12,950 | ||
![]() Sager | DWM-04-61-L-D-805 | Samtec Inc | Board to Board & Mezzanine Connectors .050 x .100 Flex Stack, Flexible Micro Board Stacker RoHS : Compliant |
| 216 | |
| DWM-34-61-L-D-720 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| OPB461L11 | TT Electronics OPTEK Technology | Optical Switches, Transmissive, Photo IC Output Photologic Slotted Optical Switch RoHS : Compliant |
| 0 | ||
| DWM-24-61-L-D-720 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DWM-24-61-L-S-250 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DWM-04-61-L-D-250 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DWM-34-61-L-S-250 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DWM-04-61-L-S-425 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HDWM-24-61-L-S-250 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DWM-04-61-L-S-500 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DWM-14-61-L-D-250 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DWM-14-61-L-S-610 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HDWM-14-61-L-D-250 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| SNAP5461LATR | Hubbell Incorporated | SNAPCONNECT SINGLE TR 20A/250V LA |
| 0 | ||
| HDWM-14-61-L-S-250 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() Interstate Connecting Components | CMB02E-24-61L(PCA) | Amphenol Industrial Operations | RECEPTACLE | 0 | ||
| U773GA461L2071 | Amphenol High Speed Interconnects | 1X4 SFP28 CAGE, EMI FINGERS | 0 | |||
| U773GA461L2071 | Amphenol FCi | 1X4 SFP28 CAGE, EMI FINGERS | 0 | |||
![]() PEI Genesis | 146-1-L | HellermannTyton |
| 0 | ||
| 146-1-L-W24 | HellermannTyton |
| 0 | |||
![]() Powell Electronics | DWM-04-61-L-S-750 | Samtec Inc | Cable Assembly, Wire-to-Board, Dual-Row RoHS : Compliant |
| 152 | |
| DWM-04-61-L-D-805 | Samtec Inc | .100 Elevated Single Row Screw Machine S RoHS : Compliant |
| 143 | ||
| DWM-04-61-L-D-840 | Samtec Inc | Cable Assembly, Wire-to-Board, Dual-Row |
| 143 | ||
| DWM-04-61-L-D-804 | Samtec Inc | .100 Elevated Single Row Screw Machine S RoHS : Compliant |
| 143 | ||
| DWM-14-61-L-S-787 | Samtec Inc | .050" x .100" Flex Stack, Flexible Micro RoHS : Compliant |
| 71 | ||
| DWM-14-61-L-D-804 | Samtec Inc | .100 Elevated Single Row Screw Machine S RoHS : Compliant |
| 63 | ||
| DWM-14-61-L-D-599 | Samtec Inc | .050" x .100" Flex Stack, Flexible Micro RoHS : Compliant |
| 63 | ||
| DWM-14-61-L-D-744 | Samtec Inc | .050" x .100" Flex Stack, Flexible Micro RoHS : Compliant |
| 63 | ||
| DWM-14-61-L-D-900 | Samtec Inc | .050" x .100" Flex Stack, Flexible Micro RoHS : Compliant |
| 63 | ||
| DWM-34-61-L-D-767 | Samtec Inc | .050" x .100" Flex Stack, Flexible Micro RoHS : Compliant |
| 29 | ||
![]() Richardson RFPD | 106485-HMC461LP3 | Analog Devices Inc | HMC461LP3 RF Amplifier Evaluation Board RoHS : Compliant | 0 | ||
| HMC461LP3ETR | Analog Devices Inc | RF Amp Dual Power Amp 2.2GHz 6V 16-Pin QFN EP T/R RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | SMBZ1461LT1 | onsemi | IN STOCK SHIP TODAY |
| 2,300 | |
| WP92461L105 | AT&T | IN STOCK SHIP TODAY |
| 9 | ||
| 28-P20461L903 | Cinch Connectivity Solutions | IN STOCK SHIP TODAY | 6 | |||
| 28-P20461L904 | Cinch Connectivity Solutions | IN STOCK SHIP TODAY | 4 | |||
![]() FDH Electronics | M5594/6-1L | Honeywell Sensing and Control | Switches | 0 | ||
![]() Flip Electronics | SMBZ1461LT1G | onsemi | Stock, Ship Today |
| 30,000 | |
![]() Master Electronics | DWM-34-61-L-D-720 | Samtec Inc | .050 x .100 Flex Stack Flexible Micro Board Stacker RoHS : Compliant |
| 0 | |
| DWM-44-61-L-S-625 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SST-07-28-GF-84.61-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DWM-14-61-L-D-750 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DWM-24-61-L-D-720 | Samtec Inc | .050 x .100 Flex Stack Flexible Micro Board Stacker RoHS : Compliant |
| 0 | ||
| DWM-14-61-L-S-200 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DWM-24-61-L-S-540 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DWM-04-61-L-D-805 | Samtec Inc | .050 X .100 FLEX STAC RoHS : Compliant |
| 0 | ||
| DWM-04-61-L-D-850 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DWM-24-61-L-S-930 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DWM-04-61-L-S-385 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DWM-34-61-L-D-200 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DWM-34-61-L-D-813 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DWM-24-61-L-D-930 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DWM-24-61-L-S-250 | Samtec Inc | .050 x .100 Flex Stack Flexible Micro Board Stacker RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W01461LF/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 12 Inch Length Using LMR-195-FR Coax with HeatShrink, LF Solder., Radio frequency assembly fire rated SMA male right angle to SMA male right angle low loss cable 12 inch length using LMR-195-FR coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated SMA male right angle to SMA male right angle low loss cable 12 inch length using LMR-195-FR coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W01461LF/HS-12 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01461LF/HS-12 RF cable has a FRPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W01461LF/HS-12 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 3,320 | |
| PE3W01461LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-195-FR Coax with HeatShrink, LF Solder., Radio frequency assembly fire rated SMA male right angle to SMA male right angle low loss cable 24 inch length using LMR-195-FR coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated SMA male right angle to SMA male right angle low loss cable 24 inch length using LMR-195-FR coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W01461LF/HS-24 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01461LF/HS-24 RF cable has a FRPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W01461LF/HS-24 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 3,320 | ||
| PE3W01461LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Fire Rated SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-195-FR Coax with HeatShrink, LF Solder., Radio frequency assembly fire rated SMA male right angle to SMA male right angle low loss cable 36 inch length using LMR-195-FR coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated SMA male right angle to SMA male right angle low loss cable 36 inch length using LMR-195-FR coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W01461LF/HS-36 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01461LF/HS-36 RF cable has a FRPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W01461LF/HS-36 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 3,320 | ||
| PE34461LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMB Plug Right Angle to SMB Plug Right Angle Cable 24 Inch Length Using RG400 Coax, RoHS., Radio frequency assembly SMB plug right angle to SMB plug right angle cable 24 inch length using RG400 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug right angle to SMB plug right angle cable 24 inch length using RG400 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMB cable connection on one end and right angle SMB cable connection on the other. Our right angle SMB to right angle SMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMB cable is a plug to plug coax assembly, PE34461LF-24, can also be known as a right angle SMB male to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE34461LF-24 is built with RG400 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to right angle SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMB right angle plug to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMB right angle male to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug right angle to SMB plug right angle cable 24 inch length using RG400 coax, RoHS. |
| 1,501 | ||
| PE34461LF-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMB Plug Right Angle to SMB Plug Right Angle Cable 72 Inch Length Using RG400 Coax, RoHS., Radio frequency assembly SMB plug right angle to SMB plug right angle cable 72 inch length using RG400 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug right angle to SMB plug right angle cable 72 inch length using RG400 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMB cable connection on one end and right angle SMB cable connection on the other. Our right angle SMB to right angle SMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMB cable is a plug to plug coax assembly, PE34461LF-72, can also be known as a right angle SMB male to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE34461LF-72 is built with RG400 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to right angle SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMB right angle plug to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMB right angle male to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug right angle to SMB plug right angle cable 72 inch length using RG400 coax, RoHS. |
| 1,501 | ||
| PE34461LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMB Plug Right Angle to SMB Plug Right Angle Cable 12 Inch Length Using RG400 Coax, RoHS., Radio frequency assembly SMB plug right angle to SMB plug right angle cable 12 inch length using RG400 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug right angle to SMB plug right angle cable 12 inch length using RG400 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMB cable connection on one end and right angle SMB cable connection on the other. Our right angle SMB to right angle SMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMB cable is a plug to plug coax assembly, PE34461LF-12, can also be known as a right angle SMB male to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE34461LF-12 is built with RG400 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to right angle SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMB right angle plug to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMB right angle male to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug right angle to SMB plug right angle cable 12 inch length using RG400 coax, RoHS. |
| 1,501 | ||
| PE34461LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMB Plug Right Angle to SMB Plug Right Angle Cable 60 Inch Length Using RG400 Coax, RoHS., Radio frequency assembly SMB plug right angle to SMB plug right angle cable 60 inch length using RG400 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug right angle to SMB plug right angle cable 60 inch length using RG400 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMB cable connection on one end and right angle SMB cable connection on the other. Our right angle SMB to right angle SMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMB cable is a plug to plug coax assembly, PE34461LF-60, can also be known as a right angle SMB male to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE34461LF-60 is built with RG400 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to right angle SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMB right angle plug to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMB right angle male to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug right angle to SMB plug right angle cable 60 inch length using RG400 coax, RoHS. |
| 1,501 | ||
| PE3C1461LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. SMA Female to TNC Male Cable Using LMR-400 Coax, LF Solder. PE3C1461LF is a SMA female to TNC male cable using LMR-400 coax. This Pasternack SMA female to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our female SMA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1461LF SMA female to TNC male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W18461LF | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. Push-On Mini UHF Male to Push-On Mini UHF Male Cable Using RG400 Coax, LF Solder. PE3W18461LF is a Mini UHF male to Mini UHF male cable using RG400 coax. This Pasternack Mini UHF male to Mini UHF male cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm Mini UHF for connector 2. Our male Mini UHF to male Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18461LF Mini UHF male to Mini UHF male cable assembly is constructed with RG400 coax. | 0 | |||
| PE33461LF | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. BNC Female to MCX Plug Right Angle Cable Using RG174 Coax, LF Solder., Radio frequency assembly BNC female to MCX plug right angle cable using RG174 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to MCX plug right angle cable using RG174 coax, LF solder, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and right angle MCX cable connection on the other. Our BNC to right angle MCX cable assemblies have a female gender on end 1 and plug on end 2. PE33461LF can also be known as a BNC jack to right angle MCX male cable assembly and will be shipped same-day as it is purchased. BNC jack to MCX male cable assembly PE33461LF is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33461LF can also be used in the other direction and will be right angle MCX plug to BNC female cable assembly if the opposite connectivity is required. BNC jack to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to MCX cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female to MCX plug right angle cable using RG174 coax, LF solder. | 0 | |||
| PE3W03461LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm. N Female 4 Hole Flange to N Female 4 Hole Flange Cable Using RG8 Coax, LF Solder, RoHS. PE3W03461LF is a N female 4 hole flange to N female 4 hole flange cable using RG8 coax. This Pasternack N female 4 hole flange to N female 4 hole flange cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N 4 hole flange to female N 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03461LF N female 4 hole flange to N female 4 hole flange cable assembly is constructed with RG8 coax. | 0 | |||
| PE33461LF-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. BNC Female to MCX Plug Right Angle Cable 72 Inch Length Using RG174 Coax, LF Solder., Radio frequency assembly BNC female to MCX plug right angle cable 72 inch length using RG174 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to MCX plug right angle cable 72 inch length using RG174 coax, LF solder, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and right angle MCX cable connection on the other. Our BNC to right angle MCX cable assemblies have a female gender on end 1 and plug on end 2. PE33461LF-72 can also be known as a BNC jack to right angle MCX male cable assembly and will be shipped same-day as it is purchased. BNC jack to MCX male cable assembly PE33461LF-72 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33461LF-72 can also be used in the other direction and will be right angle MCX plug to BNC female cable assembly if the opposite connectivity is required. BNC jack to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to MCX cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female to MCX plug right angle cable 72 inch length using RG174 coax, LF solder. |
| 0 | ||
| PE3W00461LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male to N Female Bulkhead Cable Using RG316 Co. PE3W00461LF is a SMA male to N female bulkhead cable using RG316 coax. This Pasternack SMA male to N female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our male SMA to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00461LF SMA male to N female bulkhead cable assembly is constructed with RG316 coax. | 0 | |||
| PE33461LF-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Female to MCX Plug Right Angle Cable 36 Inch Length Using RG174 Coax, LF Solder., Radio frequency assembly BNC female to MCX plug right angle cable 36 inch length using RG174 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to MCX plug right angle cable 36 inch length using RG174 coax, LF solder, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and right angle MCX cable connection on the other. Our BNC to right angle MCX cable assemblies have a female gender on end 1 and plug on end 2. PE33461LF-36 can also be known as a BNC jack to right angle MCX male cable assembly and will be shipped same-day as it is purchased. BNC jack to MCX male cable assembly PE33461LF-36 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33461LF-36 can also be used in the other direction and will be right angle MCX plug to BNC female cable assembly if the opposite connectivity is required. BNC jack to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to MCX cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female to MCX plug right angle cable 36 inch length using RG174 coax, LF solder. |
| 0 | ||
| PE33461LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Female to MCX Plug Right Angle Cable 12 Inch Length Using RG174 Coax, LF Solder., Radio frequency assembly BNC female to MCX plug right angle cable 12 inch length using RG174 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to MCX plug right angle cable 12 inch length using RG174 coax, LF solder, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and right angle MCX cable connection on the other. Our BNC to right angle MCX cable assemblies have a female gender on end 1 and plug on end 2. PE33461LF-12 can also be known as a BNC jack to right angle MCX male cable assembly and will be shipped same-day as it is purchased. BNC jack to MCX male cable assembly PE33461LF-12 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33461LF-12 can also be used in the other direction and will be right angle MCX plug to BNC female cable assembly if the opposite connectivity is required. BNC jack to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to MCX cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female to MCX plug right angle cable 12 inch length using RG174 coax, LF solder. |
| 0 | ||
![]() Vyrian | 106485-HMC461LP3 | Analog Devices Inc | 10,925 | |||
| HMC461LP3 | Analog Devices Inc | Narrow Band Medium Power Amplifier, 1700MHz Min, 2200MHz Max, 2 Func, GAAS RoHS : Not Compliant | 8,985 | |||
| HMC461LP3TR | Analog Devices Inc | Narrow Band Medium Power Amplifier, 1700MHz Min, 2200MHz Max, 2 Func, BIPolar RoHS : Not Compliant | 6,634 | |||
| HMC461LP3E | Analog Devices Inc | Narrow Band Medium Power Amplifier, 1700MHz Min, 2200MHz Max, 2 Func, GAAS RoHS : Compliant | 5,829 | |||
| TLE49461LHALA1 | Infineon Technologies AG | Hall Effect Sensor, -19mT Min, 19mT Max, 0-20mA, Rectangular, 3 Pin, Through Hole Mount RoHS : Compliant | 3,880 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |