50480800BCNDWNTZCWC Price, Distributor, Stock

Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 48 inches. MHV Male to SHV Plug Cable 48 Inch Length Using RG58 Coax., Radio frequency assembly MHV male to SHV plug cable 48 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MHV male to SHV plug cable 48 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and SHV cable connection on the other. Our MHV to SHV cable assemblies have a male gender on end 1 and plug on end 2. This MHV to SHV cable is a male to plug coax assembly, PE3950-48, can also be known as a MHV plug to SHV male cable assembly and will be shipped same-day as it is purchased. MHV plug to SHV male cable assembly PE3950-48 is built with RG58 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency MHV male to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3950-48 can also be used in the other direction and will be SHV plug to MHV male cable assembly if the opposite connectivity is required. MHV plug to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to SHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV male to SHV plug cable 48 inch length using RG58 coax.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

3,866

PE3W13504-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Right Angle Low Loss Cable 60 Inch Length Using LMR-200 Coax., Radio frequency assembly TNC male to TNC male right angle low loss cable 60 inch length using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male right angle low loss cable 60 inch length using LMR-200 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W13504-60 can also be known as a low loss TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W13504-60 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13504-60 can also be used in the other direction and will be right angle TNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male right angle low loss cable 60 inch length using LMR-200 coax.

1 : $101.99
25 : $96.89
50 : $91.79
100 : $87.71

133

TC-250-4310MS-LP

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: 4.3-10, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: SPP-250-LLPL, Interface Type 2: SPF-250, Interface Type 3: SPO-250, Interface Type 4: 1/4" Superflexible, Interface Type 5: PE-1/4SFHC. 4.3-10 Male Low PIM Snap-On Connector Solder Attachment for SPP-250-LLPL, SPF-250, SPO-250, 1/4" Superflexible, PE-1/4SFHC. TC-250-4310MS-LP 4.3-10 male coaxial snap-on connector has an interface type of 4.3-10 male SPP-250-LLPL, SPF-250, SPO-250, 1/4" Superflexible, PE-1/4SFHC and a 50 Ohm impedance. Pasternack 4.3-10 male connector uses shield/contact solder/solder as an attachment method. Our male 4.3-10 coaxial connector provides a minimum frequency of DC and a maximum frequency of 6 GHz. The Pasternack 4.3-10 male coaxial snap-on connector has a PTFE dielectric type and a VSWR of 1.25. The Pasternack 4.3-10 coaxial connector has a brass body with tri-metal plating. Our TC-250-4310MS-LP 4.3-10 connector uses brass contact. This 4.3-10 male coaxial snap-on RF connector is RoHS and REACH compliant. This Pasternack male 4.3-10 connector will ship the same day as purchased. Our 4.3-10 male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 4.3-10 connector cable assemblies that will ship the same day as well.

1 : $24.97
25 : $23.97
50 : $23.22
100 : $22.72

PE45047

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Interface Type 1: LMR-200, Interface Type 2: PE-C200. N Female Bulkhead Mount Connector Crimp/Solder Attachment for LMR-200, PE-C200, IP67 Rated. PE45047 type N female bulkhead coaxial connector has an interface type of LMR-200, PE-C200 and a 50 Ohm impedance. Pasternack type N female bulkhead connector uses shield/contact crimp/solder as an attachment method. Our female type N coaxial connector provides a minimum frequency of DC and a maximum frequency of 3 GHz. The Pasternack N type female bulkhead coaxial connector has a PTFE dielectric type and a VSWR of 1.2. Our PE45047 N type connector uses copper contact and a tri-metal plating material. This type N female bulkhead coaxial RF connector is RoHS and REACH compliant. This Pasternack female N type bulkhead connector will ship the same day as purchased. Our bulkhead type N female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom type N connector cable assemblies that will ship the same day as well, *LMR™ is a Trademark of Times Microwave.

1 : $42.79
25 : $41.08
50 : $39.79
100 : $38.94

PE3C6504-24

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-375, RF Cable Type: SPO-375, RF Cable Impedance: 50 Ohm, Length: 24 inches. Outdoor Rated 7/16 DIN Female to 7/16 DIN Female Low PIM Cable 24 Inch Length Using SPO-375 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN female to 7/16 DIN female low PIM cable 24 inch length using SPO-375 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN female to 7/16 DIN female low PIM cable 24 inch length using SPO-375 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP375-716F-LP 7/16 DIN cable connection on one end and TC-SPP375-716F-LP 7/16 DIN cable connection on the other. Our low PIM TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable assemblies have a female gender on end 1 and female on end 2. This TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable is a female to female coax assembly, PE3C6504-24, can also be known as a low PIM TC-SPP375-716F-LP 7/16 DIN jack to TC-SPP375-716F-LP 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. TC-SPP375-716F-LP 7/16 DIN jack to TC-SPP375-716F-LP 7/16 DIN jack cable assembly PE3C6504-24 is built with SPO-375 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP375-716F-LP 7/16 DIN cable assembly is manufactured with TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM TC-SPP375-716F-LP 7/16 DIN female to TC-SPP375-716F-LP 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP375-716F-LP 7/16 DIN jack to TC-SPP375-716F-LP 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP375-716F-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN female to 7/16 DIN female low PIM cable 24 inch length using SPO-375 coax using Times Microwave parts.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

PE3MSA00450-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Lead Free 3-Lug TRB Bulkhead Insulated Jack to Jack for 78 Ohm M17/176-00002, 48" Cable., Radio frequency assembly lead free 3-Lug TRB bulkhead insulated jack to jack for 78 Ohm M17/176-00002, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 3-Lug TRB bulkhead insulated jack to jack for 78 Ohm M17/176-00002, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MSA00450-48 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MSA00450-48 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack bulkhead to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female bulkhead to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 3-Lug TRB bulkhead insulated jack to jack for 78 Ohm M17/176-00002, 48" cable.

1 : $169.99
25 : $161.49
50 : $152.99
100 : $146.19

PE3C5504-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Smooth Bore SMP Male Bulkhead to Trimmed Lead Cable 36 Inch Length Using Tinned RG405 Coax., Radio frequency assembly smooth bore SMP male bulkhead to trimmed lead cable 36 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Smooth bore SMP male bulkhead to trimmed lead cable 36 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to trimmed lead cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and trimmed lead cable connection on the other. Our SMP to trimmed lead cable assembly has male gender on end 1 and sexless on end 2. PE3C5504-36 can also be known as a SMP plug to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMP plug to trimmed lead sexless cable assembly PE3C5504-36 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has crimp/solder attachment method and body with plating.Additional dimensions, specifications and CAD drawings for this PE3C5504-36 RF cable are available on our downloadable PDF datasheet.PE3C5504-36 can also be used in the other direction and will be trimmed lead sexless to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to trimmed lead cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP RF cable assembly as per your requirements.

1 : $119.99
25 : $113.99
50 : $107.99
100 : $103.19

PE3W23504

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. N Male to 7/16 DIN Female Cable Using RG141 Coax. PE3W23504 is a N male to 7/16 DIN female cable using RG141 coax. This Pasternack N male to 7/16 DIN female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male N to female 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W23504 N male to 7/16 DIN female cable assembly is constructed with RG141 coax.

PE3W25043

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to SMB Plug Right Angle Cable Using RG405 Coax. PE3W25043 is a BNC female bulkhead to SMB plug right angle cable using RG405 coax. This Pasternack BNC female bulkhead to SMB plug right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMB for connector 2. BNC to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female BNC bulkhead to plug SMB right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W25043 BNC female bulkhead to SMB plug right angle cable assembly is constructed with RG405 coax.

PE3C5504-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Smooth Bore SMP Male Bulkhead to Trimmed Lead Cable 18 Inch Length Using Tinned RG405 Coax., Radio frequency assembly smooth bore SMP male bulkhead to trimmed lead cable 18 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Smooth bore SMP male bulkhead to trimmed lead cable 18 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to trimmed lead cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and trimmed lead cable connection on the other. Our SMP to trimmed lead cable assembly has male gender on end 1 and sexless on end 2. PE3C5504-18 can also be known as a SMP plug to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMP plug to trimmed lead sexless cable assembly PE3C5504-18 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has crimp/solder attachment method and body with plating.Additional dimensions, specifications and CAD drawings for this PE3C5504-18 RF cable are available on our downloadable PDF datasheet.PE3C5504-18 can also be used in the other direction and will be trimmed lead sexless to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to trimmed lead cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP RF cable assembly as per your requirements.

1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15

PE3W05047/WH/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMB Positive Snap, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: Mini SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm SMB Positive Snap Plug to 75 Ohm Mini SMB Plug Right Angle Cable Using 75 Ohm RG187 Coax with HeatShrink, LF Solder., Pasternack’s PE3W05047/WH/HS SMB positive snap plug to right angle mini SMB plug RF cable assembly using RG187 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB positive snap plug to mini SMB plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB positive snap to mini SMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMB positive snap cable connection on one end and a right angle mini SMB cable connection on the other. Our SMB positive snap to mini SMB cable assembly has a plug gender on end 1 and a plug on end 2. PE3W05047/WH/HS can also be known as a SMB positive snap male to right angle mini SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W05047/WH/HS RF cable has a ptfe jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. This PE3W05047/WH/HS SMB positive snap male to mini SMB male cable assembly is built with RG187, which is a flexible coax type. The Pasternack flexible SMB positive snap cable assembly is manufactured with SMB positive snap to right angle mini SMB cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05047/WH/HS can also be used in the other direction and will be a right angle mini SMB plug to SMB positive snap plug cable assembly if the opposite connectivity is required. This SMB positive snap male to mini SMB right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB positive snap to mini SMB cable assembly for quick shipment worldwide. Variations of SMB positive snap and mini SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB positive snap to mini SMB RF cable assembly as per your requirements.

PE3W05504

Pasternack Enterprises

Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Snap-On MMBX Plug to SMA Male Cable Using LMR-100 Coax. PE3W05504 is a MMBX plug to SMA male cable using LMR-100A coax. This Pasternack MMBX plug to SMA male cable assembly uses a 50 Ohm MMBX for connector 1 and a 50 Ohm SMA for connector 2. Our plug MMBX to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05504 MMBX plug to SMA male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE45043

Pasternack Enterprises

1 : $39.39

PE34504-36

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm, Length: 36 inches. TNC Male to BNC Male Cable 36 Inch Length Using RG8 Coax., Radio frequency assembly TNC male to BNC male cable 36 inch length using RG8 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to BNC male cable 36 inch length using RG8 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and BNC cable connection on the other. Our TNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to BNC cable is a male to male coax assembly, PE34504-36, can also be known as a TNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to BNC plug cable assembly PE34504-36 is built with RG8 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this TNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34504-36 can also be used in the other direction and will be BNC male to TNC male cable assembly if the opposite connectivity is required. TNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to BNC male cable 36 inch length using RG8 coax.

1 : $143.99
25 : $136.79
50 : $129.59
100 : $123.83

PE3C10504

Pasternack Enterprises

Teledyne HiRel

5962-89755043A

Teledyne HiRel

PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT AND-OR
RoHS : Not Compliant

5962-9071504MXA

Teledyne HiRel

FIFO MEMORY, 4K X 9, 50 NS ACCESS TIME
RoHS : Not Compliant

5962-9154504MQA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR
RoHS : Not Compliant

5962-9158504MUA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 50 NS ACCESS TIME
RoHS : Not Compliant

5962-8873504LA

Teledyne HiRel

PROM, ONE TIME, 2K X 8, REGISTERED, 25 NS ACCESS TIME
RoHS : Not Compliant

M38510/31504B2A

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS
RoHS : Not Compliant

5962-8751504KA

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 90 NS ACCESS TIME
RoHS : Not Compliant

5962-8680504QA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 16, 170 NS ACCESS TIME
RoHS : Not Compliant

5962-9158504MYA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 50 NS ACCESS TIME
RoHS : Not Compliant

5962-8680504XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 16, 170 NS ACCESS TIME
RoHS : Not Compliant

5962-88735043C

Teledyne HiRel

PROM OTP 2K X 8 REGISTERED 25 NS

5962-9071504MYA

Teledyne HiRel

FIFO MEMORY, 4K X 9, 50 NS ACCESS TIME
RoHS : Not Compliant

5962-8873504KA

Teledyne HiRel

PROM, ONE TIME, 2K X 8, REGISTERED, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-8751504JA

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 90 NS ACCESS TIME
RoHS : Not Compliant

5962-9154504MYA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR
RoHS : Not Compliant

Venkel Ltd.

C0805X7R250-472KNP

VENKEL LTD

Chip Capacitor;0805;X7R;25V;4700pF;�10%
RoHS : Compliant

94,000

C0805C0G250-4R7BNP

VENKEL LTD

Chip Capacitor;0805;C0G;25V;4.7pF;�0.1pF
RoHS : Compliant

12,000

C01005HQN250-4R0ANP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;25V;4pF;�0.05pF
RoHS : Compliant

C0201C0G250-470JNP

VENKEL LTD

Chip Capacitor;0201;C0G;25V;47pF;�5%
RoHS : Compliant

C0201HQN250-4R1CNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;25V;4.1pF;�0.25pF
RoHS : Compliant

C0603HQN250-4R3ANP

VENKEL LTD

High-Q NP0 Capacitor;0603;HQN;25V;4.3pF;�0.05pF
RoHS : Compliant

C0805C0G250-4R7CNE

VENKEL LTD

Chip Capacitor;0805;C0G;25V;4.7pF;�0.25pF
RoHS : Compliant

C0805X7R250-474JNE

VENKEL LTD

Chip Capacitor;0805;X7R;25V;0.47uF;�5%
RoHS : Compliant

MELFC0207-XK-1504FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�100PPM;1.5M;�1%
RoHS : Compliant

HVCR1206-4W-7504FT

VENKEL LTD

High Voltage CR;1206;1/4W;7.5M;�1%
RoHS : Compliant

PWCR1210-VK-7504DT

VENKEL LTD

Pulse Withstanding CR;1210;1/2W;�100PPM;7.5M;�0.5%
RoHS : Compliant

C0805C0G250-470FNP

VENKEL LTD

Chip Capacitor;0805;C0G;25V;47pF;�1%
RoHS : Compliant

C1206Z5U250-474ZNP

VENKEL LTD

Chip Capacitor;1206;Z5U;25V;0.47uF;+80-20%
RoHS : Compliant

CRG2010-V-1504FT

VENKEL LTD

RoHS 10/10 Green CR;2010;1/2W;1.5M;�1%
RoHS : Compliant

C0201C0G250-4R0CNP

VENKEL LTD

Chip Capacitor;0201;C0G;25V;4pF;�0.25pF
RoHS : Compliant

Waytek, Inc.

AL-07-50-4-C

Advanced Cable Ties Inc

ACT AL-07-50-4-C nylon cable tie is a 7.56" self-locking tie with 50 lb. tensile strength for bundling wire, cable, hoses, and tubing. Its one-piece nylon construction supports reliable general-purpose fastening and color-based identification in harness and panel applications.

100 : $0.0774
200 : $0.0746
500 : $0.069
1,000 : $0.0655
5,000 : $0.0634

22,100

0695040.PXPS

Littelfuse Inc

MCase+ 32VDC Slotted 40A
RoHS : Compliant

10 : $1.4655
50 : $1.4127
100 : $1.3631
200 : $1.2948
500 : $1.2482
1,000 : $1.2078

2,274

0695040

Littelfuse Inc

40A MCase Green Fuse 32V LIKE BUSSMANN FMM

10 : $1.3471
50 : $1.2462
100 : $1.1317
200 : $1.088
500 : $1.0471
1,000 : $1.0062

1,962

5045

Blue Sea Systems

ST Blade Compact Fuse Block 4 Circuits for ATO/ATC fuse **RETAIL**

1 : $31.92

486

01550400Z

Littelfuse Inc

30A ATO Stackable Panel Mount Fuse Holder 10 ga Orange AFH2BP

1 : $4.3386
10 : $4.1718
50 : $4.0382
100 : $3.8214
200 : $3.6879
500 : $3.5709

433

19325-04P

Eaton Electronics

25 AMP Maxi Circuit Breaker ATC Blade Reset 19325-04P-02 BUSSMANN

1 : $6.36
10 : $6.15
50 : $5.91
100 : $5.49
200 : $5.37
500 : $5.16

339

625-040-102

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #40

10 : $2.315
50 : $2.0578
100 : $1.8674
200 : $1.8102
500 : $1.7434
1,000 : $1.6767

308

19125-04M

Eaton Electronics

25 AMP Maxi Circuit Breaker ATC Blade Buss 19125-04M

1 : $5.697
50 : $4.7154
100 : $4.1409
200 : $3.8776
500 : $3.7102

280

BLR-504

OptiFuse

ATO/ATC Fuse Block w/Clear Cover, 4 Position, 32vdc 100A M4 Screws

1 : $10.03
10 : $8.58
50 : $7.79
100 : $7.51
200 : $7.28
500 : $7.09

216

185040F-01-1

Eaton Electronics

The Eaton Bussmann Series 185040F-01-1 is a 40A surface-mount thermal circuit breaker designed for reliable overcurrent protection in high-current automotive and marine systems. Featuring a manual reset (Type III) push-to-trip design with visual trip indication, it allows easy fault detection and reset. Built with a sealed IP67 thermoplastic housing, it is ignition-protected and ideal for harsh environments such as engine compartments and bilge areas.

1 : $26.56
5 : $25.6
10 : $24.82
50 : $24.43
100 : $23.85
200 : $23.46

176

19315-04M

Eaton Electronics

15 AMP Maxi Circuit Breaker ATC Blade Reset 19315-04M-02 BUSSMANN

1 : $8.88
10 : $7.6
50 : $6.9
100 : $6.65
200 : $6.44
500 : $6.28

145

55046

Cole Hersee

Cole Hersee 55046 reversing metal toggle switch is a DPDT momentary (On)-Off-(On) switch for forward-reverse control. It is rated 20A at 12VDC, 15A at 24VDC, and 10A at 36VDC, with (4) 1/4" blade terminals and silver contacts.

1 : $47.7
5 : $42.59
10 : $39.75
50 : $37.67
100 : $35.78
200 : $34.07

5046

Blue Sea Systems

ST Blade Compact Fuse Block 8 Circuits for ATO/ATC fuse **RETAIL**

1 : $60.38

15513504

Aptiv PLC

Aptiv OCS 1.5 Series 6-Way Female Sealed Connector

1 : $1.8919
50 : $1.693
100 : $1.5355
200 : $1.4805
500 : $1.4326
1,000 : $1.3778

19115-04M

Eaton Electronics

15 AMP Maxi Circuit Breaker ATC Blade Buss 19115-04M

1 : $5.68
50 : $4.74
100 : $4.12
200 : $3.88
500 : $3.71

Win Source Electronics

LMR50410XDBVR

Texas Instruments

SIMPLE SWITCHER 4-V TO 36-V, 1-A
RoHS : Compliant

1,475 : $0.2035
1,185 : $0.2118
910 : $0.22
635 : $0.2366
410 : $0.2449
195 : $0.2614

47,230

CDCS504TPWRQ1

Texas Instruments

CLOCK FREQUENCY MULTIPLIER
RoHS : Compliant

370 : $0.8144
280 : $0.9083
215 : $0.9397
155 : $0.971
100 : $1.0023
45 : $1.2215

44,000

ADR5043BRTZ

Analog Devices Inc

ADI Low Cost 3.0V Shunt Voltage Reference

315 : $0.9572
235 : $1.0676
185 : $1.1044
135 : $1.1412
85 : $1.178
35 : $1.4357

30,000

ADR5040ARTZ

Analog Devices Inc

Precision Micropower Shunt Mode Voltage References

595 : $0.5649
480 : $0.5884
370 : $0.612
255 : $0.659
165 : $0.6825
80 : $0.7296

23,420

DSPIC33EP256GP504-I/ML

Microchip Technology Inc

IC MCU 16BIT 256KB FLASH 44QFN / MCU 16-bit dsPIC RISC 256KB Flash 3.3V 44-Pin QFN EP Tube
RoHS : Compliant

85 : $3.5455
64 : $3.9546
49 : $4.091
36 : $4.2273
23 : $4.3637
10 : $5.3182

22,388

AZ1345-04F.R7G

Amazing Microelectronic Corp

RoHS : Compliant

2,560 : $0.1173
1,910 : $0.1309
1,480 : $0.1354
1,075 : $0.1399
695 : $0.1444
285 : $0.176

18,950

LMR50410YQDBVRQ1

Texas Instruments

NIXON PLUS-LMR50410YQDBVRQ1
RoHS : Compliant

285 : $1.0568
215 : $1.1787
165 : $1.2193
120 : $1.26
80 : $1.3006
35 : $1.5851

18,227

ADR5041BKSZ

Analog Devices Inc

ADI Low Cost 2.5V Shunt Voltage Reference

360 : $0.936
270 : $1.044
210 : $1.08
155 : $1.116
100 : $1.152
40 : $1.4039

17,230

ADR5045BRTZ-REEL7

Analog Devices Inc

IC VREF SHUNT 5V SOT23-3
RoHS : Compliant

255 : $1.1819
190 : $1.3182
150 : $1.3637
110 : $1.4091
70 : $1.4546
30 : $1.7728

13,950

HV733ATTE1504F

KOA Speer Electronics Inc

RES 1.5M OHM 1% 1W 2512
RoHS : Compliant

1,105 : $0.3043
830 : $0.3394
640 : $0.3511
465 : $0.3628
300 : $0.3745
125 : $0.4564

10,900

LT3504EUFD#PBF

Linear Technology

IC REG BUCK ADJ 1A QD 28QFN
RoHS : Compliant

29 : $10.5317
22 : $11.7469
17 : $12.152
12 : $12.557
8 : $12.9621
4 : $15.7976

7,263

1473150-4

TE Connectivity

CONN SKT SODIMM 200POS R/A SMD
RoHS : Compliant

37 : $8.282
28 : $9.2376
21 : $9.5562
16 : $9.8747
10 : $10.1933
5 : $12.423

6,000

SST25VF080B-50-4C-S2AF-T

Microchip Technology Inc

IC FLASH 8MBIT 50MHZ 8SOIC
RoHS : Compliant

177 : $1.9047
132 : $2.1244
102 : $2.1977
74 : $2.2709
48 : $2.3442
20 : $2.857

1,920

BCM56504B2KEBG

Broadcom Limited

24-PORT GIGABIT ETHERNET MULTI

4 : $97.7911
3 : $109.0747
2 : $112.8359
1 : $116.597

375

ADRF5045BCCZN-R7

Analog Devices Inc

IC RF SWITCH SP4T 30GHZ 24LGA
RoHS : Compliant

1 : $787.8788

50480800BCNDWNTZCWC Distributor

Link URL