507R-R1 Price, Distributor, Stock

High working loads convenient mechanical advantage and compact size are common advantages that make these Southco rotary draw latches a good choice for co-planar applications where space and strength are important functional considerations.

17W05079B

Essentra Components

FLAT WASHER, .317 ID, .500 OD,

78230-050741

Avdel

SCHIENE F. ZUFHRBLOCK 8.54.8MM

5070

Heyco

5070-002 (105-PAD-R/L)

5599-N-205-075-125

RAF Electronic Hardware

4507T-440-AL

RAF Electronic Hardware

13RS075071B

Essentra Components

ROUND SPACER, .510 ID, .750 OD

13RS125075B

Essentra Components

ROUND SPACER, .177 ID, 1.250 O

XT3750750A

Essentra Components

BARBED FASTENER 0.943 NYLON BLK

M1507-B-2545-B-37

RAF Electronic Hardware

METRIC RD SWAGE STNDOFF DUCTIL NCKL

AEHSS-616-150-750

PennEngineering (PEM)

3/8-16

E3-1215-071

Southco

The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic

ECCO

9800005076

ITT Interconnect Solutions

5,738

980-0005-076-MS

ITT Interconnect Solutions

50 : $0.5441

4,999

065074-0039

ITT Interconnect Solutions

1 : $38.1

10-825815-07S

Amphenol Industrial Operations

1 : $158.0

Pasternack Enterprises US

PE3C3507

Pasternack Enterprises

2,823

PE34750-72

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 72 inches. Reverse Polarity SMA Male to Reverse Polarity SMA Male Cable 72 Inch Length Using RG142 Coax., Radio frequency assembly reverse polarity SMA male to reverse polarity SMA male cable 72 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA male to reverse polarity SMA male cable 72 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to reverse polarity SMA cable is a male to male coax assembly, PE34750-72, can also be known as a reverse polarity SMA plug to reverse polarity SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to reverse polarity SMA plug cable assembly PE34750-72 is built with RG142 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA male to reverse polarity SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA reverse polarity plug to SMA reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to reverse polarity SMA male cable 72 inch length using RG142 coax.

1 : $101.99
25 : $96.89
50 : $91.79
100 : $87.71

1,146

PE3C5075LF

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UMCX 2.5, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to UMCX 2.5 Plug Right Angle Cable Using RG178 Coax, LF Solder., Radio frequency assembly SMA female bulkhead to UMCX 2.5 plug right angle cable using RG178 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to UMCX 2.5 plug right angle cable using RG178 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX 2.5 cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle UMCX 2.5 cable connection on the other. Our SMA to right angle UMCX 2.5 cable assembly has female gender on end 1 and plug on end 2. PE3C5075LF can also be known as a SMA jack to right angle UMCX 2.5 male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA jack to UMCX 2.5 male cable assembly PE3C5075LF is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle UMCX 2.5 cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has solder attachment method and body with plating.Additional dimensions, specifications and CAD drawings for this PE3C5075LF RF cable are available on our downloadable PDF datasheet.PE3C5075LF can also be used in the other direction and will be right angle UMCX 2.5 plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to UMCX 2.5 right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX 2.5 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

895

PE3C3507-24

Pasternack Enterprises

1 : $86.69
25 : $82.36
50 : $78.02
100 : $74.55

676

PE3W05071

Pasternack Enterprises

PE3W25079

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. SMA Female to N Male Right Angle Cable Using PE-SR402FL Coax. PE3W25079 is a SMA female to N male right angle cable using PE-SR402FL coax. This Pasternack SMA female to N male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to male N right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W25079 SMA female to N male right angle cable assembly is constructed with PE-SR402FL coax.

PE15A5073

Pasternack Enterprises

Key Specifications, Frequency, Min: 1.7 GHz, Frequency, Max: 2.4 GHz, Gain, Typical: 54 dB, 3rd Intercept Point, Typ: 44 dB, Voltage, DC Typ: 28 Volts, Voltage, DC Max: 30 Volts. 35 Watt, L & S Band GaN Power Amplifier, 1700 MHz to 2400 MHz, Class AB, 40% Efficiency, 28V, SMA. RF solid state power amplifier (SSPA) PE15A5073 from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a high power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 3 Watts. Pasternack solid state power amplifier part number PE15A5073 SMA high power amp has a 54 dB typical gain. The high power high gain amp is rated with a Psat of 35 dBm. Our radio frequency high power solid state amplifier is constructed for minimum frequency of 1.7 GHz and a maximum frequency of 2.4 GHz. Additional radio frequency specs on this high frequency high gain high power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our high power high gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This high power 3 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs.

1 : $9,530.0
5 : $9,339.4
10 : $9,148.8
25 : $8,958.2

PE36450-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. Reverse Polarity SMA Plug to Reverse Polarity SMA Plug Cable 72 Inch Length Using RG174 Coax., Radio frequency assembly reverse polarity SMA plug to reverse polarity SMA plug cable 72 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug to reverse polarity SMA plug cable 72 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a plug gender on end 1 and plug on end 2. PE36450-72 can also be known as a reverse polarity SMA male to reverse polarity SMA male cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to reverse polarity SMA male cable assembly PE36450-72 is built with RG174 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency reverse polarity SMA plug to reverse polarity SMA plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA reverse polarity male to SMA reverse polarity male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to reverse polarity SMA plug cable 72 inch length using RG174 coax.

1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59

PE36507-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male Right Angle to MMCX Plug Right Angle Cable 60 Inch Length Using RG174 Coax., Radio frequency assembly SMA male right angle to MMCX plug right angle cable 60 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to MMCX plug right angle cable 60 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle MMCX cable connection on the other. Our right angle SMA to right angle MMCX cable assemblies have a male gender on end 1 and plug on end 2. This SMA to MMCX cable is a male to plug coax assembly, PE36507-60, can also be known as a right angle SMA plug to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to MMCX male cable assembly PE36507-60 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA right angle male to MMCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36507-60 can also be used in the other direction and will be right angle MMCX plug to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to MMCX plug right angle cable 60 inch length using RG174 coax.

1 : $99.59
25 : $94.61
50 : $89.63
100 : $85.65

PE3W15075-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female to SMA Male Low Loss Cable 36 Inch Length Using LMR-100A-UF Coax., Radio frequency assembly SMA female to SMA male low loss cable 36 inch length using LMR-100A-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to SMA male low loss cable 36 inch length using LMR-100A-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W15075-36 can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15075-36 RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA female to SMA male cable has a maximum VSWR of 1.4:1. SMA jack to SMA plug cable assembly PE3W15075-36 is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15075-36 can also be used in the other direction and will be a SMA male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

PE3M0250-72

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL-27478, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 72 inches. Temperature Conditioned N Female Bulkhead to N Female Bulkhead Low Loss Cable 72 Inch Length Using PE-P300LL Coax., Pasternack temperature conditioned N female bulkhead to N female bulkhead low loss cable 72 inch length using PE-P300LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0250-72 is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability type N to N type cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with type N connection on one end and type N connection on the other. Our low loss type N to N type cable assemblies have a female gender on end 1 and female on end 2. This N type to type N cable is a female to female coax assembly. PE3M0250-72 can also be known as a temperature conditioned low loss type N jack to N type jack cable assembly and will be shipped the same day after it is purchased. type N jack to type N jack cable assembly PE3M0250-72 is built with PE-P300LL which is a flexible coax. The Pasternack flexible type N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency type N female to N type female cable are located on the datasheet specifications PDF along with CAD drawing and dimensions, Pasternack high reliability low loss type N jack to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for same-day shipment worldwide. Variations of PE44807 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned N female bulkhead to N female bulkhead low loss cable 72 inch length using PE-P300LL coax.

1 : $1,200.0
25 : $1,140.0
50 : $1,080.0
100 : $1,032.0

PE3050-72

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 72 Inch Length Using RG188 Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 72 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 72 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3050-72, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3050-72 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3050-72 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 72 inch length using RG188 coax.

1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47

PE3W10507/HS-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. N Male to TNC Male Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly N male to TNC male low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 200 cm length using LMR-100 coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W10507/HS-200CM can also be known as a low loss N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3W10507/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10507/HS-200CM can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 200 cm length using LMR-100 coax with heatshrink.

1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47

PE3W05075LF/BL

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.2-5, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 1.0/2.3 Plug to 2.2-5 Male Low PIM Cable Using TFT-5G-402 Coax., Pasternack’s PE3W05075LF/BL low PIM 1.0/2.3 plug to 2.2-5 male RF cable assembly using TFT-5G-402 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0/2.3 plug to 2.2-5 male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.0/2.3 to 2.2-5 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 1.0/2.3 cable connection on one end and a 2.2-5 cable connection on the other. Our 1.0/2.3 to 2.2-5 cable assembly has a plug gender on end 1 and a male on end 2. PE3W05075LF/BL can also be known as a low PIM 1.0/2.3 male to 2.2-5 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3W05075LF/BL RF cable has an FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 1.0/2.3 plug to 2.2-5 male cable has a maximum VSWR of 1.4:1. This PE3W05075LF/BL 1.0/2.3 male to 2.2-5 plug cable assembly is built with TFT-5G-402, which is a flexible coax type. The Pasternack low passive intermodulation flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 2.2-5 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W05075LF/BL can also be used in the other direction and will be a 2.2-5 male to 1.0/2.3 plug cable assembly if the opposite connectivity is required. This low PIM 1.0/2.3 male to 2.2-5 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 and 2.2-5 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, low PIM, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0/2.3 to 2.2-5 low PIM RF cable assembly as per your requirements.

PE3W10507/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to TNC Male Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly N male to TNC male low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 24 inch length using LMR-100 coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W10507/HS-24 can also be known as a low loss N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3W10507/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10507/HS-24 can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 24 inch length using LMR-100 coax with heatshrink.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

Teledyne HiRel

5962-9071507MYA

Teledyne HiRel

FIFO MEMORY, 4K X 9, 20 NS ACCESS TIME
RoHS : Not Compliant

5962-8680507QA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 16, 90 NS ACCESS TIME
RoHS : Not Compliant

5962-9154507MXA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR
RoHS : Not Compliant

5962-9071507MUA

Teledyne HiRel

FIFO MEMORY, 4K X 9, 20 NS ACCESS TIME
RoHS : Not Compliant

5962-8751507JA

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-9071507MZA

Teledyne HiRel

FIFO MEMORY, 4K X 9, 20 NS ACCESS TIME
RoHS : Not Compliant

5962-8751507LA

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-9154507MQA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR
RoHS : Not Compliant

5962-8680507XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 16, 90 NS ACCESS TIME
RoHS : Not Compliant

5962-9154507MYA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR
RoHS : Not Compliant

5962-87515073A

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-8751507KA

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-9071507MXA

Teledyne HiRel

FIFO MEMORY, 4K X 9, 20 NS ACCESS TIME
RoHS : Not Compliant

5962-87515073C

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 35 NS ACCESS TIME

Venkel Ltd.

C0805C0G250-7R5BNE

VENKEL LTD

Chip Capacitor;0805;C0G;25V;7.5pF;�0.1pF
RoHS : Compliant

10,000

C0201HQN250-7R1CNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;25V;7.1pF;�0.25pF
RoHS : Compliant

C0201HQN250-7R7CNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;25V;7.7pF;�0.25pF
RoHS : Compliant

C0402HQN250-7R5DNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;25V;7.5pF;�0.5pF
RoHS : Compliant

C0201C0G250-7R0CNP

VENKEL LTD

Chip Capacitor;0201;C0G;25V;7pF;�0.25pF
RoHS : Compliant

C0603HQN250-7R1CNP

VENKEL LTD

High-Q NP0 Capacitor;0603;HQN;25V;7.1pF;�0.25pF
RoHS : Compliant

C0201HQN250-7R7DNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;25V;7.7pF;�0.5pF
RoHS : Compliant

C0603HQN250-7R9BNP

VENKEL LTD

High-Q NP0 Capacitor;0603;HQN;25V;7.9pF;�0.1pF
RoHS : Compliant

PHPI181507-1R0MU

VENKEL LTD

PH Power Inductor;181507;1uH;�20%
RoHS : Not Compliant

PHPI181507-5R6MU

VENKEL LTD

PH Power Inductor;181507;5.6uH;�20%
RoHS : Not Compliant

PHPI181507-681MU

VENKEL LTD

PH Power Inductor;181507;680uH;�20%
RoHS : Not Compliant

C0402HQN250-7R7BNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;25V;7.7pF;�0.1pF
RoHS : Compliant

C0603HQN250-7R6DNP

VENKEL LTD

High-Q NP0 Capacitor;0603;HQN;25V;7.6pF;�0.5pF
RoHS : Compliant

C0201HQN250-7R4BNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;25V;7.4pF;�0.1pF
RoHS : Compliant

C0402HQN250-7R2CNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;25V;7.2pF;�0.25pF
RoHS : Compliant

Vyrian

1507243

Phoenix Contact

Circular Connector, 2 Contact(s), Zinc Alloy, Male, Plug
RoHS : Compliant

12,217

1507324

Phoenix Contact

Circular Connector, 2 Contact(s), Female, Socket
RoHS : Compliant

12,212

AD7507SQ

Analog Devices Inc

Multiplexers/Switches, 1 Func, 8 Channel, CMOS, CDIP28
RoHS : Not Compliant

11,410

1850738

Phoenix Contact

Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

10,698

1507450

Phoenix Contact

Circular Connector, 5 Contact(s), Male, Plug
RoHS : Compliant

9,629

1507117

Phoenix Contact

Circular Connector, 5 Contact(s), Female, Socket
RoHS : Compliant

9,214

ADG507AKN

Analog Devices Inc

Differential Multiplexer, 1 Func, 8 Channel, CMOS, PDIP28
RoHS : Not Compliant

9,083

2N5070

Texas Instruments

Transistor

8,512

1855076

Phoenix Contact

Rack and Panel Connector, 50 Contact(s), Female, Crimp Terminal
RoHS : Compliant

8,185

1850783

Phoenix Contact

Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

7,452

SM320VC5507PGE

Texas Instruments

Digital Signal Processor, 16-Ext Bit, 50MHz, CMOS, PQFP144

7,039

1507081

Phoenix Contact

Circular Connector, 5 Contact(s), Male, Plug
RoHS : Compliant

5,683

PT6507A

Texas Instruments

Switching Regulator, Voltage-mode, 20A, 725kHz Switching Freq-Max, Hybrid
RoHS : Not Compliant

5,077

597-3507-507F

Dialight

Single Color LED, Yellow Green, Water Clear, 0.6mm
RoHS : Compliant

771

52885-0704

Molex

Board Stacking Connector, 70 Contact(s), 2 Row(s), Female, Straight, 0.025 inch Pitch, Surface Mount Terminal, Locking, White Insulator, Receptacle
RoHS : Not Compliant

473

Waytek, Inc.

AL-07-50-7-C

Advanced Cable Ties Inc

ACT AL-07-50-7-C nylon cable tie is a 7.56" self-locking tie with 50 lb. tensile strength for bundling wire, cable, hoses, and tubing. Its one-piece nylon construction supports reliable general-purpose fastening and color-based identification in harness and panel applications.

100 : $0.1041
200 : $0.0962
500 : $0.0874
1,000 : $0.081
5,000 : $0.077

22,000

5550750BK00R2

ShawCor Ltd

DSG-Canusa 5550750BK00R2 CPA-300 heat shrink tubing is black adhesive-lined tubing with a .750" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing.

100 : $2.9853
500 : $2.7332

700

5550750RD00R2

ShawCor Ltd

DSG-Canusa 5550750RD00R2 CPA-300 heat shrink tubing is red adhesive-lined tubing with a .750" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing.

100 : $2.8706
500 : $2.6282

200

185070F-01-1

Eaton Electronics

70A Manual Reset Hi Amp Surface Mount Circuit Breaker Like CB185-70

1 : $35.47
5 : $31.68
10 : $29.54
50 : $27.88
100 : $26.56
200 : $25.41

Win Source Electronics

885075

TriQuint Semiconductor

2300-2400 MHz Tx/Rx Filter

865 : $0.3895
695 : $0.4058
535 : $0.422
370 : $0.4545
240 : $0.4707
115 : $0.5031

274,350

CSD17507Q5A

Texas Instruments

MOSFET N-CH 30V 65A 8SON
RoHS : Compliant

625 : $0.5417
465 : $0.6042
360 : $0.6251
265 : $0.6459
170 : $0.6667
70 : $0.8126

37,500

HLMP-3507

Broadcom Limited

LED Uni-Color Green 565nm 2-Pin T-1 3/4 / LED GRN DIFF 5MM ROUND T/H
RoHS : Compliant

1,055 : $0.2844
790 : $0.3172
610 : $0.3281
445 : $0.339
290 : $0.35
120 : $0.4265

34,000

LTR-507ALS-01

Lite-On Semiconductor Corporation

SENSOR OPT AMBIENT LGT PHOTO
RoHS : Compliant

935 : $0.322
700 : $0.3591
540 : $0.3715
395 : $0.3839
255 : $0.3963
105 : $0.4829

28,000

RFFC5071A

RF Micro Devices Inc

WIDEBAND SYNTHESIZER/VCO WITH INTEGRATED 6GHz MIXER

11 : $27.3685
9 : $30.5264
7 : $31.579
5 : $32.6316
3 : $33.6843
2 : $41.0527

10,000

APFA2507QBDSEEZGKC

Kingbright

LED RGB CLEAR 4SMD R/A / Red, Green, Blue (RGB) 621nm Red, 525nm Green, 465nm Blue LED Indication - Discrete 2V Red, 3.3V Green, 3.3V Blue 4-SMD, No Lead
RoHS : Compliant

770 : $0.3918
575 : $0.437
445 : $0.452
325 : $0.4671
210 : $0.4822
90 : $0.5876

8,594

LM95071QIMF/NOPB