516-TN5-R Price, Distributor, Stock

Key Specifications, Polarity: Standard, Connector Series: MCX, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: Thru Hole. MCX Jack Right Angle Commercial Grade Connector Solder Attachment Thru Hole PCB. PE51698 MCX jack right angle PCB connector has an interface type of MCX jack which is compatible with thru hole cables and has an impedance of 50 Ohms. Pasternack's MCX jack connector uses solder as an attachment method. Our jack MCX right angle PCB connector provides a maximum frequency of 6 GHz. Our high-quality radio frequency co-axial connector is used for general purpose test and printed circuit board applications. This MCX jack RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack right angle MCX jack PCB connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's MCX PCB connector has a brass body with gold plating. Our PE51698 MCX right angle connector uses a gold-plated beryllium copper contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. This threaded jack MCX PCB RF connector has a maximum insertion loss of 0.4 dB. This right angle MCX connector has a gold inner contact plating. Our right angle MCX jack connector has a length of 0.37 inches, a width of 0.32 inches, and a weight of 0.2 lbs. This Pasternack commercial grade right angle jack MCX connector will ship the same business day as purchased. Our MCX right angle jack connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $7.59
25 : $7.21
50 : $6.83
100 : $6.53

478

PE5165

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 18 GHz, Adapter Body Style: Straight, Connector Body Material 1: Passivated Stainless Steel, Connector Body Material 2: Passivated Stainless Steel. Precision 2.4mm Female to N Female Adapter. The precision 2.4mm to type N adapter PE5165 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance and a maximum VSWR of 1.15:1. This RF adapter has a female to female gender configuration, which provides easier connections in tighter spaces. Our 2.4mm to type N adapter is precision manufactured to RF component industry specifications and has a maximum frequency of 18 GHz. This precision RF adapter has a dielectric withstanding voltage of 500 Vrms. This 2.4mm female to type N female adapter is one of the many RF components that ship the same business day as they are ordered. The PE5165 female 2.4mm to female type N adapter has a straight body. This Pasternack 2.4mm to type N coax adapter is an in-line RF adapter in a precision design. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. Our adapter has a maximum insertion loss of 0.13 dB. This precision RF adapter has a 1.264-inch length, 0.512-inch width, and 0.05 lbs weight. The PE5165 adapter from Pasternack is made from a passivated stainless steel connector body and has a beryllium copper center contact. Our 2.4mm female to type N female radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. This precision RF adapter has an operating temperature range of -65 to 165 degrees C. Additional dimensions and specifications for this adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of 2.4mm to type N radio frequency precision adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 18 GHz RF adapter that meets your requirements.

1 : $363.99
25 : $345.79
50 : $327.59
100 : $313.03

PE3C6516-48

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-500, RF Cable Type: SPF-500, RF Cable Impedance: 50 Ohm, Length: 48 inches. Fire Rated 4.3-10 Male to 4.3-10 Male Low PIM Cable 48 Inch Length Using SPF-500 Coax Using Times Microwave Parts., Radio frequency assembly fire rated 4.3-10 male to 4.3-10 male low PIM cable 48 inch length using SPF-500 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated 4.3-10 male to 4.3-10 male low PIM cable 48 inch length using SPF-500 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP500-4310M-LP 4.3-10 to TC-SPP500-4310M-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP500-4310M-LP 4.3-10 cable connection on one end and TC-SPP500-4310M-LP 4.3-10 cable connection on the other. Our low PIM TC-SPP500-4310M-LP 4.3-10 to TC-SPP500-4310M-LP 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP500-4310M-LP 4.3-10 to TC-SPP500-4310M-LP 4.3-10 cable is a male to male coax assembly, PE3C6516-48, can also be known as a low PIM TC-SPP500-4310M-LP 4.3-10 plug to TC-SPP500-4310M-LP 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. TC-SPP500-4310M-LP 4.3-10 plug to TC-SPP500-4310M-LP 4.3-10 plug cable assembly PE3C6516-48 is built with SPF-500 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP500-4310M-LP 4.3-10 cable assembly is manufactured with TC-SPP500-4310M-LP 4.3-10 to TC-SPP500-4310M-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM TC-SPP500-4310M-LP 4.3-10 male to TC-SPP500-4310M-LP 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP500-4310M-LP 4.3-10 plug to TC-SPP500-4310M-LP 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP500-4310M-LP 4.3-10 to TC-SPP500-4310M-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-SPP500-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 4.3-10 male to 4.3-10 male low PIM cable 48 inch length using SPF-500 coax using Times Microwave parts.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

PE3C10351-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low PIM Cable 60 Inch Length Using TCOM-400 Coax With Times Microwave Components., Radio frequency assembly N male to N male low PIM cable 60 inch length using TCOM-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N male low PIM cable 60 inch length using TCOM-400 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10351-60 can also be known as a low PIM type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10351-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Type N plug to type N plug cable assembly PE3C10351-60 is built with TCOM-400 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

1 : $209.99
25 : $201.59
50 : $195.29
100 : $191.09

PE3C4851-6

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 6 inches. Slide-On BMA Plug Bulkhead to Slide-On BMA Jack Bulkhead Cable 6 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to slide-on BMA jack bulkhead cable 6 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to slide-on BMA jack bulkhead cable 6 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BMA bulkhead cable connection on the other. Our BMA to BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4851-6, can also be known as a BMA male to BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4851-6 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA plug bulkhead to BMA jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4851-6 can also be used in the other direction and will be BMA jack bulkhead to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to slide-on BMA jack bulkhead cable 6 inch length using PE-SR405FLJ coax.

1 : $143.99
25 : $136.79
50 : $129.59
100 : $123.83

PE3W05161

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SSMC Jack to MCX Jack Cable Using RG316-DS Coax. PE3W05161 is a SSMC jack to MCX jack cable using RG316-DS coax. This Pasternack SSMC jack to MCX jack cable assembly uses a 50 Ohm SSMC for connector 1 and a 50 Ohm MCX for connector 2. Our jack SSMC to jack MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05161 SSMC jack to MCX jack cable assembly is constructed with RG316-DS coax.

PE3W25169

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SMA Female to TNC Female Bulkhead Cable Using RG58 Coax. PE3W25169 is a SMA female to TNC female bulkhead cable using RG58 coax. This Pasternack SMA female to TNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our female SMA to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25169 SMA female to TNC female bulkhead cable assembly is constructed with RG58 coax.

PE3C5163

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. BNC Female to TNC Male Cable Using LMR-240-UF Coax., Radio frequency assembly BNC female to TNC male cable using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC female to TNC male cable using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and TNC cable connection on the other. Our BNC to TNC cable assemblies have a female gender on end 1 and male on end 2. This BNC to TNC cable is a female to male coax assembly, PE3C5163, can also be known as a BNC jack to TNC plug cable assembly and will be shipped same-day as it is purchased. BNC jack to TNC plug cable assembly PE3C5163 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC female to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5163 can also be used in the other direction and will be TNC male to BNC female cable assembly if the opposite connectivity is required. BNC jack to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to TNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female to TNC male cable using LMR-240-UF coax.

PE3W05167

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Female Bulkhead to N Female Bulkhead Cable Using LMR-195 Coax. PE3W05167 is a N female bulkhead to N female bulkhead cable using LMR-195 coax. This Pasternack N female bulkhead to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N bulkhead to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05167 N female bulkhead to N female bulkhead cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W16516

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMA Female Cable Using Tinned RG405 Coax. PE3W16516 is a SMP female right angle to SMA female cable using RG405 Tinned coax. This Pasternack SMP female right angle to SMA female cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMA for connector 2. SMP right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to female SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W16516 SMP female right angle to SMA female cable assembly is constructed with RG405 Tinned coax.

PE33516LF-48

Pasternack Enterprises

Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length: 48 inches. MHV Male to SHV Plug Cable 48 Inch Length Using RG214 Coax, RoHS., Radio frequency assembly MHV male to SHV plug cable 48 inch length using RG214 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MHV male to SHV plug cable 48 inch length using RG214 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and SHV cable connection on the other. Our MHV to SHV cable assemblies have a male gender on end 1 and plug on end 2. This MHV to SHV cable is a male to plug coax assembly, PE33516LF-48, can also be known as a MHV plug to SHV male cable assembly and will be shipped same-day as it is purchased. MHV plug to SHV male cable assembly PE33516LF-48 is built with RG214 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MHV male to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33516LF-48 can also be used in the other direction and will be SHV plug to MHV male cable assembly if the opposite connectivity is required. MHV plug to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to SHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV male to SHV plug cable 48 inch length using RG214 coax, RoHS.

1 : $151.99
25 : $144.39
50 : $136.79

PE5167

Pasternack Enterprises

Key Specifications. Connector Series 1 SMA Connector Gender 1 Female Connector Impedance 1 50 Ohm Connector Series 2 SMA Connector Gender 2 Female Connector Impedance 2 50 Ohm Frequency, Min DC Frequency, Max 27 GHz Adapter Body Style Straight Connector Mount Method 1 Bulkhead Connector Body Material 1 Passivated Stainless Steel Connector Body Material 2 Passivated Stainless Steel. Bulkhead Mount SMA Female to SMA Female Adapter, Hole size 0.256 X 0.217 inch. The SMA adapter PE5167 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance and a maximum VSWR of 1.2:1. This RF adapter has a female to female gender configuration, which provides easier connections in tighter spaces. Our SMA bulkhead to SMA adapter is precision manufactured to RF component industry specifications and has a maximum frequency of 27 GHz. , This SMA bulkhead female to SMA female adapter is one of the many RF components that ship the same business day as they are ordered. The PE5167 female SMA to female SMA adapter has a straight body. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. Our adapter has a maximum insertion loss of 0.207 dB. This RF adapter has a 0.874-inch length, 0.374-inch width, and 0.01 lbs weight. , The PE5167 adapter from Pasternack is made from a passivated stainless steel connector body and has a beryllium copper center contact. Our SMA female to SMA female radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. This RF adapter has an operating temperature range of -65 to 165 degrees C. Additional dimensions and specifications for this adapter are on our downloadable PDF datasheet above. , Pasternack has one of the largest in-stock selections of SMA to SMA radio frequency adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 27 GHz RF adapter that meets your requirements.

1 : $100.99
25 : $95.94
50 : $90.89
100 : $86.85

PE3W05165/BK/PH180

Pasternack Enterprises

PE33516LF-24

Pasternack Enterprises

Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length: 24 inches. MHV Male to SHV Plug Cable 24 Inch Length Using RG214 Coax, RoHS., Radio frequency assembly MHV male to SHV plug cable 24 inch length using RG214 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MHV male to SHV plug cable 24 inch length using RG214 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and SHV cable connection on the other. Our MHV to SHV cable assemblies have a male gender on end 1 and plug on end 2. This MHV to SHV cable is a male to plug coax assembly, PE33516LF-24, can also be known as a MHV plug to SHV male cable assembly and will be shipped same-day as it is purchased. MHV plug to SHV male cable assembly PE33516LF-24 is built with RG214 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MHV male to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33516LF-24 can also be used in the other direction and will be SHV plug to MHV male cable assembly if the opposite connectivity is required. MHV plug to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to SHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV male to SHV plug cable 24 inch length using RG214 coax, RoHS.

1 : $130.99
25 : $124.44
50 : $117.89

PE3516/HS2

Pasternack Enterprises

Teledyne HiRel

5962-8751601DA

Teledyne HiRel

VOLT. COMPARATOR, DUAL DIFFERENTIAL
RoHS : Not Compliant

5962-8751601CA

Teledyne HiRel

VOLT. COMPARATOR, DUAL DIFFERENTIAL
RoHS : Not Compliant

Venkel Ltd.

C0805HQN251-6R6BNP

VENKEL LTD

High-Q NP0 Capacitor;0805;HQN;250V;6.6pF;�0.1pF
RoHS : Compliant

C1210X7R251-683KNE

VENKEL LTD

HV Chip Capacitor;1210;X7R;250V;0.068uF;�10%
RoHS : Compliant

C0603HQN251-6R2DNP

VENKEL LTD

High-Q NP0 Capacitor;0603;HQN;250V;6.2pF;�0.5pF
RoHS : Compliant

C0603HQN251-680JNP

VENKEL LTD

High-Q NP0 Chip Capacitor;0603;HQN;250V;68pF;�5%
RoHS : Compliant

C0805HQN251-680FNP

VENKEL LTD

High-Q NP0 Capacitor;0805;HQN;250V;68pF;�1%
RoHS : Compliant

C0805HQN251-6R7CNP

VENKEL LTD

High-Q NP0 Capacitor;0805;HQN;250V;6.7pF;�0.25pF
RoHS : Compliant

C0505HQN251-680GNE

VENKEL LTD

High-Q NP0 Capacitor;0505;HQN;250V;68pF;�2%
RoHS : Compliant

C0505HQN251-6R7DNE

VENKEL LTD

High-Q NP0 Capacitor;0505;HQN;250V;6.7pF;�0.5pF
RoHS : Compliant

C0603HQN251-6R4CNP

VENKEL LTD

High-Q NP0 Capacitor;0603;HQN;250V;6.4pF;�0.25pF
RoHS : Compliant

C1111HQN251-681FNE

VENKEL LTD

High-Q NP0 Capacitor;1111;HQN;250V;680pF;�1%
RoHS : Compliant

C1111HQN251-6R8CNE

VENKEL LTD

High-Q NP0 Capacitor;1111;HQN;250V;6.8pF;�0.25pF
RoHS : Compliant

C0505HQN251-6R6DNE

VENKEL LTD

High-Q NP0 Capacitor;0505;HQN;250V;6.6pF;�0.5pF
RoHS : Compliant

C0603HQN251-6R3CNP

VENKEL LTD

High-Q NP0 Capacitor;0603;HQN;250V;6.3pF;�0.25pF
RoHS : Compliant

C1111HQN251-680FNE

VENKEL LTD

High-Q NP0 Capacitor;1111;HQN;250V;68pF;�1%
RoHS : Compliant

C0805C0G251-681FNE

VENKEL LTD

HV Chip Capacitor;0805;C0G;250V;680pF;�1%
RoHS : Compliant

Win Source Electronics

BAS516/DG

Nexperia

42,860 : $0.0091
31,250 : $0.0103
25,000 : $0.0103
16,670 : $0.0116
11,115 : $0.0116
5,560 : $0.0116

99,000

PBSS5160T

Nexperia

60 V, 1 A PNP low VCEsat (BISS) transistor
RoHS : Compliant

14,710 : $0.0204
11,015 : $0.0227
8,515 : $0.0235
6,175 : $0.0243
4,000 : $0.025
1,640 : $0.0305

96,263

LM5163QDDARQ1

Texas Instruments

PWR MGMT SWITCHING REGULATOR
RoHS : Compliant

98 : $3.075
79 : $3.2
61 : $3.325
42 : $3.575
28 : $3.7
13 : $3.95

40,000

MIC5166YML-TR

Microchip Technology Inc

IC PWR SUP 3A HS DDR TERM 10MLF
RoHS : Compliant

135 : $2.2364
108 : $2.3273
83 : $2.4182
58 : $2.6
38 : $2.691
18 : $2.8728

22,844

LM5165QDRCRQ1

Texas Instruments

IC REG BUCK ADJ 150MA 10VSON / Buck Switching Regulator IC Positive Adjustable 1.223V 1 Output 150mA 10-VFDFN Exposed Pad
RoHS : Compliant

66 : $4.5682
50 : $5.0953
38 : $5.271
28 : $5.4467
18 : $5.6224
8 : $6.8523

18,000

ATMEGA8515-16AU

Atmel Corporation

IC MCU 8BIT 8KB FLASH 44TQFP
RoHS : Compliant

81 : $3.7273
65 : $3.8788
50 : $4.0304
35 : $4.3334
23 : $4.4849
11 : $4.7879

15,155

LM5164QDDARQ1

Texas Instruments

POWER MANAGEMENT
RoHS : Compliant

34 : $9.0138
27 : $9.3802
21 : $9.7466
15 : $10.4794
10 : $10.8459
5 : $11.5787

10,000

LM5160DNTR/LM5160DNTJ

Texas Instruments

77 : $3.9436
61 : $4.1039
47 : $4.2642
33 : $4.5848
22 : $4.7451
10 : $5.0657

9,980

LM5160DNTR/LM5160DNTT

Texas Instruments

77 : $3.9436
61 : $4.1039
47 : $4.2642
33 : $4.5848
22 : $4.7451
10 : $5.0657

9,820

LM5164QDDARQ1/LM5164QDDATQ1

Texas Instruments

34 : $9.0138
27 : $9.3802
21 : $9.7466
15 : $10.4794
10 : $10.8459
5 : $11.5787

9,560

CS45-16IO1

IXYS Integrated Circuits Division

THYRISTOR PHASE 1600V TO-247AD

90 : $3.3596
67 : $3.7472
52 : $3.8764
38 : $4.0056
25 : $4.1348
10 : $5.0393

6,394

LM5160ADNTT

Texas Instruments

IC REG BCK FLYBCK ADJ 12WSON
RoHS : Compliant

74 : $4.1
59 : $4.2667
46 : $4.4334
32 : $4.7667
21 : $4.9334
10 : $5.2667

5,650

5016451620

Molex

CONN HEADER VERT 16POS 2MM / Connector Header Through Hole 16 position 0.079" (2.00mm)
RoHS : Compliant

1,430 : $0.2098
1,070 : $0.234
830 : $0.242
600 : $0.2501
390 : $0.2582
160 : $0.3146

3,080

SN75160BDW

Texas Instruments

IC OCT INTRFCE BUS TXRX 20-SOIC
RoHS : Compliant

97 : $3.477
73 : $3.8782
56 : $4.012
41 : $4.1457
27 : $4.2794
11 : $5.2156

2,314

W78E516DDG

Nuvoton Technology Corp

IC MCU 8BIT 64KB FLASH 40DIP
RoHS : Compliant

3 : $113.1298
2 : $126.1833
1 : $130.5344

490

Wuhan P&S

M95160-DWDW4TP/K

STMicroelectronics

Automotive 16-Kbit SPI bus EEPROM with high speed clock
RoHS : Compliant

1 : $0.29
100 : $0.29
500 : $0.29
1,000 : $0.29

4,000

516-TN5-R Distributor

Link URL