52B1-R2 Price, Distributor, Stock

Key Specifications, Waveguide Size: WR-42, Gain Min: 15, Beam Width, 3dB V: 31.5, Beam Width, 3dB H: 31.3, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz. WR-42 Waveguide Standard Gain Horn Antenna Operating from 18 GHz to 26.5 GHz with a Nominal 15 dB Gain 2.92mm Female Input. The PE9852B/2F-15 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-42 input and a waveguide to coaxial transition adapter. Our WR-42 waveguide antenna features a 2.92mm female connector. This single-band directional antenna comes with a flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-42 standard gain horn antenna with a 2.92mm female input has a minimum frequency of 18 GHz and a maximum frequency of 26.5 GHz. Pasternack’s PE9852B/2F-15 waveguide horn antenna has a typical gain of 15 dB. Our waveguide antenna has a typical vertical beam width of 31.5 degrees and a horizontal beam width of 31.3 degrees at 3 dB. This WR-42 waveguide horn antenna with 15 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a 2.92mm female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,630.0
5 : $2,524.8
10 : $2,419.6
25 : $2,314.4

PE9852B-15

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-42, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz. WR-42 Waveguide Standard Gain Horn Antenna Operating From 18 GHz to 26.5 GHz With a Nominal 15 dBi Gain With UG-597/U Square Cover Flange. Pasternack’s PE9852B-15 WR-42 waveguide horn is also known as a waveguide horn antenna. This WR-42 standard gain horn waveguide antenna has a nominal gain of 15 dBi. Our waveguide horn can operate at frequencies ranging from 18 to 26.5 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 15 dBi waveguide horn from Pasternack has an overall length of 2.37 inches, a width of 1.14 inches, and a weight of 0.09 lbs. Our antenna comes with a UG-597/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-42 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-42 waveguide horn antenna with 15 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $1,150.0
5 : $1,104.0
10 : $1,058.0
25 : $1,012.0

PE9852B-10

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-42, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz. WR-42 Waveguide Standard Gain Horn Antenna Operating From 18 GHz to 26.5 GHz With a Nominal 10 dBi Gain With UG-597/U Square Cover Flange. Pasternack’s PE9852B-10 WR-42 waveguide horn is also known as a waveguide horn antenna. This WR-42 standard gain horn waveguide antenna has a nominal gain of 10 dBi. Our waveguide horn can operate at frequencies ranging from 18 to 26.5 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. Our antenna comes with a UG-597/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-42 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-42 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $1,390.0
5 : $1,334.4
10 : $1,278.8
25 : $1,223.2

PE9852B-25

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-42, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz, Beam Width V: 8, Beam Width H: 8. WR-42 Waveguide Standard Gain Horn Antenna Operating From 18 GHz to 26.5 GHz With a Nominal 25 dBi Gain With UG-597/U Square Cover Flange. Pasternack’s PE9852B-25 WR-42 waveguide horn is also known as a waveguide horn antenna. This WR-42 standard gain horn waveguide antenna has a nominal gain of 25 dBi. Our waveguide horn can operate at frequencies ranging from 18 to 26.5 GHz. The standard gain horn antenna has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 25 dBi waveguide horn from Pasternack has an overall length of 9.19 inches, a width of 4.75 inches, and a weight of 0.35 lbs. Our WR-42 waveguide horn antenna has a typical vertical beam width of 8 degrees and a horizontal beam width of 8 degrees at 3 dB. Our antenna comes with a UG-597/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-42 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-42 waveguide horn antenna with 25 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $1,910.0
5 : $1,833.6
10 : $1,757.2
25 : $1,680.8

PE9852B-30

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-42, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz, Beam Width V: 5, Beam Width H: 5. WR-42 Waveguide Standard Gain Horn Antenna Operating From 18 GHz to 26.5 GHz With a Nominal 30 dBi Gain With UG-597/U Square Cover Flange. Pasternack’s PE9852B-30 WR-42 waveguide horn is also known as a waveguide horn antenna. This WR-42 standard gain horn waveguide antenna has a nominal gain of 30 dBi. Our waveguide horn can operate at frequencies ranging from 18 to 26.5 GHz. The standard gain horn antenna has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 30 dBi waveguide horn from Pasternack has an overall length of 15.16 inches, a width of 7.59 inches, and a weight of 0.35 lbs. Our WR-42 waveguide horn antenna has a typical vertical beam width of 5 degrees and a horizontal beam width of 5 degrees at 3 dB. Our antenna comes with a UG-597/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-42 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-42 waveguide horn antenna with 30 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,240.0
5 : $2,150.4
10 : $2,060.8
25 : $1,971.2

PE38752B

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50. White FAKRA Plug to FAKRA Jack Cable Using RG174 Coax. PE38752B is a FAKRA plug to FAKRA jack cable using RG174 coax. This Pasternack FAKRA plug to FAKRA jack cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. Our plug FAKRA to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE38752B FAKRA plug to FAKRA jack cable assembly is constructed with RG174 coax and the maximum VSWR is 1.4:1.

PE9852B/2F-20

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-42, Gain Min: 20, Beam Width, 3dB V: 17.5, Beam Width, 3dB H: 17.8, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz. WR-42 Waveguide Standard Gain Horn Antenna Operating from 18 GHz to 26.5 GHz with a Nominal 20 dB Gain 2.92mm Female Input. The PE9852B/2F-20 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-42 input and a waveguide to coaxial transition adapter. Our WR-42 waveguide antenna features a 2.92mm female connector. This single-band directional antenna comes with a flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-42 standard gain horn antenna with a 2.92mm female input has a minimum frequency of 18 GHz and a maximum frequency of 26.5 GHz. Pasternack’s PE9852B/2F-20 waveguide horn antenna has a typical gain of 20 dB. Our waveguide antenna has a typical vertical beam width of 17.5 degrees and a horizontal beam width of 17.8 degrees at 3 dB. This WR-42 waveguide horn antenna with 20 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a 2.92mm female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,940.0
5 : $2,822.4
10 : $2,704.8
25 : $2,587.2

PE9852B-2F-25

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-42, Gain Min: 25, Beam Width, 3dB V: 8, Beam Width, 3dB H: 8, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz. WR-42 Waveguide Standard Gain Horn Antenna Operating from 18 GHz to 26.5 GHz with a Nominal 25 dB Gain 2.92mm Female Input. The PE9852B-2F-25 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-42 input and a waveguide to coaxial transition adapter. Our WR-42 waveguide antenna features a 2.92mm female connector. This single-band directional antenna comes with a UG-597/U square cover flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-42 standard gain horn antenna with a 2.92mm female input has a minimum frequency of 18 GHz and a maximum frequency of 26.5 GHz. Pasternack’s PE9852B-2F-25 waveguide horn antenna has a typical gain of 25 dB. Our waveguide antenna has a typical vertical and horizontal beam width of 8 degrees at 3 dB. This antenna has a length of 11.19 inches, a width of 4.75 inches, and a weight of 0.44 lbs. This WR-42 waveguide horn antenna with 25 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a 2.92mm female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $3,275.0
5 : $3,209.5
10 : $3,144.0
25 : $3,078.5

PE9852B/2F-10

Pasternack Enterprises

Key Specifications, Gain Min: 10, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz. WR-42 Standard Gain Horn Antenna Operating From 18 GHz to 26.5 GHz, 10 dBi Nominal Gain, 2.92mm Female Input Connector, ProLine. The PE9852B/2F-10 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Our waveguide antenna features a 2.92mm female connector. This single-band directional antenna comes with a flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our standard gain horn antenna with a 2.92mm female input has a minimum frequency of 18 GHz and a maximum frequency of 26.5 GHz. Pasternack’s PE9852B/2F-10 waveguide horn antenna has a typical gain of 10 dB. This antenna has a length of 1.94 inches, a width of 0.6 inches, and a weight of 0.5 lbs. This waveguide horn antenna with 10 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a 2.92mm female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,400.0
5 : $2,304.0
10 : $2,208.0
25 : $2,112.0

PE3W08052/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMA Male Cable Using PE-SR405FLJ Coax with HeatShrink, LF Solder., Pasternack’s PE3W08052/BK/HS right angle SMP female to SMA male RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMP cable connection on one end and an SMA cable connection on the other. Our SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W08052/BK/HS can also be known as a right angle SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W08052/BK/HS RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our right angle SMP female to SMA male cable has a maximum VSWR of 1.4:1. This PE3W08052/BK/HS SMP jack to SMA plug cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with right angle SMP to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method with gold plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W08052/BK/HS can also be used in the other direction and will be an SMA male to right angle SMP female cable assembly if the opposite connectivity is required. This SMP right angle jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMA RF cable assembly as per your requirements.

PE3W05152/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Male Right Angle Cable Using RG223 Coax with HeatShrink., Pasternack’s PE3W05152/BK/HS right angle TNC male to right angle TNC male RF cable assembly using RG223 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle TNC cable connection on one end and a right angle TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W05152/BK/HS can also be known as a right angle TNC plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05152/BK/HS RF cable has a pvc jacket of 0.209-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has an in-series connection. Our right angle TNC male to right angle TNC male cable has a maximum VSWR of 1.4:1. This PE3W05152/BK/HS TNC plug to TNC plug cable assembly is built with RG223, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This TNC right angle plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC RF cable assembly as per your requirements.

PE9852B-2F-30

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-42, Gain Min: 30, Beam Width, 3dB V: 5, Beam Width, 3dB H: 5, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz. WR-42 Waveguide Standard Gain Horn Antenna Operating from 18 GHz to 26.5 GHz with a Nominal 30 dB Gain 2.92mm Female Input. The PE9852B-2F-30 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-42 input and a waveguide to coaxial transition adapter. Our WR-42 waveguide antenna features a 2.92mm female connector. This single-band directional antenna comes with a UG-597/U square cover flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-42 standard gain horn antenna with a 2.92mm female input has a minimum frequency of 18 GHz and a maximum frequency of 26.5 GHz. Pasternack’s PE9852B-2F-30 waveguide horn antenna has a typical gain of 30 dB. Our waveguide antenna has a typical vertical and horizontal beam width of 5 degrees at 3 dB. This antenna has a length of 17.16 inches, a width of 7.59 inches, and a weight of 0.44 lbs. This WR-42 waveguide horn antenna with 30 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a 2.92mm female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,295.0
5 : $2,249.1
10 : $2,203.2
25 : $2,157.3

PE9852B-20

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-42, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz. WR-42 Waveguide Standard Gain Horn Antenna Operating From 18 GHz to 26.5 GHz With a Nominal 20 dBi Gain With UG-597/U Square Cover Flange. Pasternack’s PE9852B-20 WR-42 waveguide horn is also known as a waveguide horn antenna. This WR-42 standard gain horn waveguide antenna has a nominal gain of 20 dBi. Our waveguide horn can operate at frequencies ranging from 18 to 26.5 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 20 dBi waveguide horn from Pasternack has an overall length of 4 inches, a width of 1.98 inches, and a weight of 0.33 lbs. Our antenna comes with a UG-597/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-42 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-42 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $1,750.0
5 : $1,680.0
10 : $1,610.0
25 : $1,540.0

PE3C3152/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using RG174 Coax with HeatShrink., Pasternack’s PE3C3152/BK/HS BNC male to BNC male RF cable assembly using RG174 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to BNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C3152/BK/HS can also be known as a BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PE dielectric type. Our PE3C3152/BK/HS RF cable has a pvc jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has an in-series connection. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. This PE3C3152/BK/HS BNC plug to BNC plug cable assembly is built with RG174, which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements.

TE Connectivity

MSLPT5252BL3MTR

TE Connectivity

TACT MINI JB 5.2X5.2X1.5 160GF SPST-NO Contact Current Rating: 50 mA Actuator Style: Round Actuator Operating Function: NO Contact Base Material: Stainless Steel Switch Contact Plating Material: Silver Tactile Switch | 50 mA Round Actuator Stainless Steel | Part Number: MSLPT5252BL3MTR | Internal Number: 2337243-3 | TE Connectivity
RoHS : Compliant

2,500 : $0.57
1,000 : $0.58
500 : $0.6
250 : $0.61
100 : $0.63
50 : $0.64
25 : $0.66
10 : $0.68
1 : $0.69

8,452

MSLPT5252BG3MTR

TE Connectivity

TACT MINI GW 5.2X5.2X1.5 160GF SPST-NO Contact Current Rating: 50 mA Actuator Style: Round Actuator Operating Function: NO Contact Base Material: Stainless Steel Switch Contact Plating Material: Silver Tactile Switch | 50 mA Round Actuator Stainless Steel | Part Number: MSLPT5252BG3MTR | Internal Number: 2337237-3 | TE Connectivity
RoHS : Compliant

2,500 : $0.57
1,000 : $0.58
500 : $0.6
250 : $0.61
100 : $0.63
50 : $0.64
25 : $0.66
10 : $0.68
1 : $0.69

6,251

MSLPT5252BG1MTR

TE Connectivity

TACT MINI GW 5.2X5.2X1.5 70GF SPST-NO Contact Current Rating: 50 mA Actuator Style: Round Actuator Operating Function: NO Contact Base Material: Stainless Steel Switch Contact Plating Material: Silver Tactile Switch | 50 mA Round Actuator Stainless Steel | Part Number: MSLPT5252BG1MTR | Internal Number: 2337237-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.53
1,000 : $0.54
500 : $0.56
250 : $0.57
100 : $0.58
50 : $0.6
25 : $0.61
10 : $0.63
1 : $0.64

5,634

MSLPT5252BG2MTR

TE Connectivity

TACT MINI GW 5.2X5.2X1.5 100GF SPST-NO Contact Current Rating: 50 mA Actuator Style: Round Actuator Operating Function: NO Contact Base Material: Stainless Steel Switch Contact Plating Material: Silver Tactile Switch | 50 mA Round Actuator Stainless Steel | Part Number: MSLPT5252BG2MTR | Internal Number: 2337237-2 | TE Connectivity
RoHS : Compliant

2,500 : $0.55
1,000 : $0.56
500 : $0.58
250 : $0.59
100 : $0.61
50 : $0.62
25 : $0.64
10 : $0.65
1 : $0.67

5,423

MSLPT5252BL1MTR

TE Connectivity

TACT MINI JB 5.2X5.2X1.5 70GF SPST-NO Contact Current Rating: 50 mA Actuator Style: Round Actuator Operating Function: NO Contact Base Material: Stainless Steel Switch Contact Plating Material: Silver Tactile Switch | 50 mA Round Actuator Stainless Steel | Part Number: MSLPT5252BL1MTR | Internal Number: 2337243-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.53
1,000 : $0.54
500 : $0.56
250 : $0.57
100 : $0.58
50 : $0.6
25 : $0.61
10 : $0.63
1 : $0.64

4,534

MSLPT5252BG4MTR

TE Connectivity

TACT MINI GW 5.2X5.2X1.5 260GF SPST-NO Contact Current Rating: 50 mA Actuator Style: Round Actuator Operating Function: NO Contact Base Material: Stainless Steel Switch Contact Plating Material: Silver Tactile Switch | 50 mA Round Actuator Stainless Steel | Part Number: MSLPT5252BG4MTR | Internal Number: 2337237-4 | TE Connectivity
RoHS : Compliant

2,500 : $0.87
1,000 : $0.9
500 : $0.92
250 : $0.94
100 : $0.97
50 : $0.99
25 : $1.01
10 : $1.04
1 : $1.06

3,608

MSLPT5252BL2MTR

TE Connectivity

TACT MINI JB 5.2X5.2X1.5 100GF SPST-NO Contact Current Rating: 50 mA Actuator Style: Round Actuator Operating Function: NO Contact Base Material: Stainless Steel Switch Contact Plating Material: Silver Tactile Switch | 50 mA Round Actuator Stainless Steel | Part Number: MSLPT5252BL2MTR | Internal Number: 2337243-2 | TE Connectivity
RoHS : Compliant

2,500 : $0.55
1,000 : $0.56
500 : $0.58
250 : $0.59
100 : $0.61
50 : $0.62
25 : $0.64
10 : $0.65
1 : $0.67

3,530

MSLPT5252BL4MTR

TE Connectivity

TACT MINI JB 5.2X5.2X1.5 260GF SPST-NO Contact Current Rating: 50 mA Actuator Style: Round Actuator Operating Function: NO Contact Base Material: Stainless Steel Switch Contact Plating Material: Silver Tactile Switch | 50 mA Round Actuator Stainless Steel | Part Number: MSLPT5252BL4MTR | Internal Number: 2337243-4 | TE Connectivity
RoHS : Compliant

2,500 : $0.59
1,000 : $0.61
500 : $0.62
250 : $0.64
100 : $0.66
50 : $0.67
25 : $0.69
10 : $0.7
1 : $0.72

1,298

Teledyne HiRel

CD4052BMJ//883

Teledyne HiRel

DUAL 4-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER

Venkel Ltd.

HPTF0603-QP-1052BT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�5PPM;10.5K;�0.1%
RoHS : Compliant

HPTF0805-RP-2052BT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�5PPM;20.5K;�0.1%
RoHS : Compliant

HPTF0805-TC-2552BT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�50PPM;25.5K;�0.1%
RoHS : Compliant

HPTF1206-UE-8452BT

VENKEL LTD

High Power Thin Film CR;1206;1/3W;�25PPM;84.5K;�0.1%
RoHS : Compliant

HPTF1210-UN-7152BT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�10PPM;71.5K;�0.1%
RoHS : Compliant

HPTF2010-UC-8452BT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�50PPM;84.5K;�0.1%
RoHS : Compliant

MELFC0204-ZC-1052BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�50PPM;10.5K;�0.1%
RoHS : Compliant

MELFC0204-ZC-4752BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�50PPM;47.5K;�0.1%
RoHS : Compliant

MELFC0204-ZE-1652BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�25PPM;16.5K;�0.1%
RoHS : Compliant

MELFC0207-VE-8252BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�25PPM;82.5K;�0.1%
RoHS : Compliant

MELFC0207-XN-1052BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�10PPM;10.5K;�0.1%
RoHS : Compliant

MELFC0207-XP-1652BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�5PPM;16.5K;�0.1%
RoHS : Compliant

MELFM0204-ZE-2152BT

VENKEL LTD

MELF Molded Thin Film CR;0204;2/5W;�25PPM;21.5K;�0.1%
RoHS : Not Compliant

HPTF0603-SC-2552BT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�50PPM;25.5K;�0.1%
RoHS : Compliant

HPTF0805-RP-1052BT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�5PPM;10.5K;�0.1%
RoHS : Compliant

Vyrian

ALZ52B12

Panasonic Electronic Components

Power/Signal Relay, 1 Form A, SPST, Momentary, 0.033A (Coil), 12VDC (Coil), 400mW (Coil), DC Input, Random, AC Output, Through Hole-Straight Mount
RoHS : Compliant

14,804

N10220-52B2PC

3m Electronic Products Division

D Type Connector, 20 Contact(s), Female, 0.05 inch Pitch, Solder Terminal, M2.5, Receptacle

12,716

ADG452BRZ-REEL7

Analog Devices Inc

SPST, 4 Func, 1 Channel, CMOS, PDSO16
RoHS : Compliant

9,465

AD7152BRMZ-REEL