5331-R2 Price, Distributor, Stock

The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin

1 : $0.1587
100 : $0.1587
500 : $0.0981
1,000 : $0.0848
1,623 : $0.0848

1,623

P7-A-533-11

Southco

1 : $5.38
21 : $5.38

AESS25-331

PennEngineering (PEM)

1/4

1253-31-S

RAF Electronic Hardware

G5331

Heyco

AES25-331

PennEngineering (PEM)

Designed for high load applications. Countersunk feature allow fastener to be installed flush with sheet surface.Both UNC and UNF threads available in No. 10 and larger thread sizes. Check for availability of other grip ranges and designs.

AENM25-331

PennEngineering (PEM)

1/4

MM-03-533-14-10

Southco

MM-03-533-14-10

AES25-331CSI

PennEngineering (PEM)

1255331

Essentra Components

1253-31-AL

RAF Electronic Hardware

465331

Essentra Components

Flip Electronics

BCM53313UB0KPBG

Broadcom Limited

Stock, Ship Today

1 : $10.56

465

Maritex

JPRH 1205-331M-1R0-A

Jantek Electronics Co.

Inductor; SMD; 330uH; 1.00A; 0.51R; 12.5x12.5x6mm; 20%

10,000 : $0.284
5,000 : $0.344
1,000 : $0.404
1 : $0.598

3,000

TPS53312RGTR

Texas Instruments

DC DC Converters; TPS53312RGTR; TEXAS INSTRUMENTS

100 : $0.451
50 : $0.496
10 : $0.56
1 : $0.666

2,869

TPS53311RGTT

Texas Instruments

DC DC Converters; TPS53311RGTT; TEXAS INSTRUMENTS; 16; Buck; 1; 3 mm
RoHS : Compliant

500 : $2.321
100 : $2.584
10 : $3.02
1 : $3.516

1,748

TPS53316RGTR

Texas Instruments

DC DC Converters; TPS53316RGTR; TEXAS INSTRUMENTS; 16; Buck; 1 mm; 1
RoHS : Compliant

1,000 : $0.446
500 : $0.484
100 : $0.583
30 : $0.704
10 : $0.834
1 : $1.105

1,486

TPS53311RGTR

Texas Instruments

DC DC Converters; TPS53311RGTR; TEXAS INSTRUMENTS; 16; Buck; 1; 3 mm
RoHS : Compliant

6,000 : $0.116
3,000 : $0.123
100 : $0.144
30 : $0.158
10 : $0.212
1 : $0.281

1,088

5331006030

Wurth Elektronik

Cable connector; 1-pole; load capacity 3A; voltage 250V; AWG20-16
RoHS : Compliant

1 : $0.456

1,000

TPS53319DQPR

Texas Instruments

DC DC Converters; TPS53319DQPR; TEXAS INSTRUMENTS; 22; Buck; 1.5 mm; 1
RoHS : Compliant

1,000 : $2.987
500 : $3.126
100 : $3.45
30 : $3.914
10 : $4.378
1 : $5.259

112

RNP18-SP105-331K

RDA Microelectronics

inductor: wire; SMD; 330uH; 9.0x10x5.4mm; 10%

500 : $0.16
100 : $0.198
50 : $0.241
10 : $0.294
1 : $0.507

100

5110.1533.1

Schurter Electronic Components

Power Input Modules (PEM); 5110.1533.1; Quick Connect; 3; Flanges, Panel, Screw; Receptacle
RoHS : Compliant

200 : $8.72
150 : $9.923
100 : $11.509
50 : $13.835
30 : $15.112
20 : $15.834
10 : $16.644
1 : $17.7615

Pasternack Enterprises US

PE45331

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: BMA, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Solder/Solder, Mount Method: 2 Hole Flange, Minimum Frequency: DC, Maximum Frequency: 12.4 GHz, Interface Type 1: RG405, Interface Type 2: PE-SR405AL, Interface Type 3: PE-SR405FL, Interface Type 4: PE-SR405FLJ. BMA Jack Right Angle Slide-On Connector Solder Attachment 2 Hole Flange Mount for RG405, PE-SR405AL, PE-SR405FL, PE-SR405FLJ. PE45331 BMA jack right angle 2 hole flange coaxial slide-on connector has an interface type of RG405, PE-SR405AL, PE-SR405FL, PE-SR405FLJ and a 50 Ohm impedance. Pasternack BMA jack 2 hole flange connector uses shield/contact solder/solder as an attachment method. Our jack BMA right angle coaxial connector provides a minimum frequency of DC and a maximum frequency of 12.4 GHz. The Pasternack right angle BMA jack 2 hole flange coaxial slide-on connector has a PTFE dielectric type and a VSWR of 1.46. The Pasternack BMA coaxial connector has a brass body with tri-metal plating. Our PE45331 BMAright angle connector uses beryllium copper contact and a gold plating material. This BMA jack right angle 2 hole flange coaxial slide-on RF connector is REACH compliant. This Pasternack right angle jack BMA 2 hole flange connector will ship the same day as purchased. Our 2 hole flange BMA right angle jack connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BMA connector cable assemblies that will ship the same day as well.

1 : $136.99
25 : $130.14
50 : $123.29
100 : $117.81

305

PE3W04533-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity SMA Plug to N Male Right Angle Low Loss Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly reverse polarity SMA plug to N male right angle low loss cable 12 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA plug to N male right angle low loss cable 12 inch length using LMR-195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle N type cable connection on the other. Our low loss reverse polarity SMA to right angle type N cable assemblies have a plug gender on end 1 and male on end 2. PE3W04533-12 can also be known as a low loss reverse polarity SMA male to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to type N plug cable assembly PE3W04533-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA plug to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04533-12 can also be used in the other direction and will be right angle N type male to reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity male to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to N male right angle low loss cable 12 inch length using LMR-195 coax.

1 : $160.99
25 : $152.94
50 : $144.89
100 : $138.45

118

PE3FCA533-1M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: ST, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: -20 deg C, Min Operating Temperature: 70 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex ST UPC to ST UPC, MM OM3, 2.0mm Riser, Aqua-1M. Pasternack’s PE3FCA533-1M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long duplex cable assembly is equipped with ST/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 70 to -20 degrees C, this cable provides reliable performance across diverse conditions. As an OM3 fiber optic jumper, Pasternack’s PE3FCA533-1M is optimized for high-speed, high-bandwidth data transfer, supporting faster, longer-distance connectivity compared to OM1 fiber.The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA533-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA533-1M fiber optic cable with a 2 mm cable diameter and 30 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual ST/UPC to dual ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements.

1 : $30.19
5 : $28.98
10 : $27.77
25 : $26.57

PE3FCA533-10M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: ST, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: -20 deg C, Min Operating Temperature: 70 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex ST UPC to ST UPC, MM OM3, 2.0mm Riser, Aqua-10M. Pasternack’s PE3FCA533-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long duplex cable assembly is equipped with ST/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 70 to -20 degrees C, this cable provides reliable performance across diverse conditions. As an OM3 fiber optic jumper, Pasternack’s PE3FCA533-10M is optimized for high-speed, high-bandwidth data transfer, supporting faster, longer-distance connectivity compared to OM1 fiber.The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA533-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA533-10M fiber optic cable with a 2 mm cable diameter and 30 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual ST/UPC to dual ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements.

1 : $33.69
5 : $32.34
10 : $30.99
25 : $29.65

PE3W05331/HS

Pasternack Enterprises

PE3C8533-120

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. 7/16 DIN Male Right Angle to N Male Low Loss Cable 120 Inch Length Using LMR-600 Coax., Radio frequency assembly 7/16 DIN male right angle to N male low loss cable 120 inch length using LMR-600 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male right angle to N male low loss cable 120 inch length using LMR-600 coax, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle 7/16 DIN cable connection on one end and type N cable connection on the other. Our low loss right angle 7/16 DIN to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C8533-120 can also be known as a low loss right angle 7/16 DIN plug to N type plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3C8533-120 is built with LMR-600 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency 7/16 DIN right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8533-120 can also be used in the other direction and will be N type male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low loss 7/16 DIN right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male right angle to N male low loss cable 120 inch length using LMR-600 coax.

1 : $306.99
25 : $291.64
50 : $276.29
100 : $264.01

PE3C8533-180

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. 7/16 DIN Male Right Angle to N Male Low Loss Cable 180 Inch Length Using LMR-600 Coax., Radio frequency assembly 7/16 DIN male right angle to N male low loss cable 180 inch length using LMR-600 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male right angle to N male low loss cable 180 inch length using LMR-600 coax, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle 7/16 DIN cable connection on one end and type N cable connection on the other. Our low loss right angle 7/16 DIN to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C8533-180 can also be known as a low loss right angle 7/16 DIN plug to N type plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3C8533-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency 7/16 DIN right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8533-180 can also be used in the other direction and will be type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low loss 7/16 DIN right angle plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to N type cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male right angle to N male low loss cable 180 inch length using LMR-600 coax.

1 : $327.99
25 : $311.59
50 : $295.19
100 : $282.07

PE3W05331

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. MMCX Jack to MMCX Plug Cable Using RG188 Coax. PE3W05331 is a MMCX jack to MMCX plug cable using RG188 coax. This Pasternack MMCX jack to MMCX plug cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MMCX for connector 2. Our jack MMCX to plug MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05331 MMCX jack to MMCX plug cable assembly is constructed with RG188 coax.

PE36533-12

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 12 inches. 2.92mm Male to 1.85mm Male Cable 12 Inch Length Using PE-SR405FL Coax., Radio frequency assembly 2.92mm male to 1.85mm male cable 12 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.92mm male to 1.85mm male cable 12 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and 1.85mm cable connection on the other. Our 2.92mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 2.92mm to 1.85mm cable is a male to male coax assembly, PE36533-12, can also be known as a 2.92mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 1.85mm plug cable assembly PE36533-12 is built with PE-SR405FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2.92mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36533-12 can also be used in the other direction and will be 1.85mm male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 1.85mm male cable 12 inch length using PE-SR405FL coax.

1 : $216.99
25 : $206.14
50 : $195.29
100 : $186.61

PE36533-18

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 18 inches. 2.92mm Male to 1.85mm Male Cable 18 Inch Length Using PE-SR405FL Coax., Radio frequency assembly 2.92mm male to 1.85mm male cable 18 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.92mm male to 1.85mm male cable 18 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and 1.85mm cable connection on the other. Our 2.92mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 2.92mm to 1.85mm cable is a male to male coax assembly, PE36533-18, can also be known as a 2.92mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 1.85mm plug cable assembly PE36533-18 is built with PE-SR405FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2.92mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36533-18 can also be used in the other direction and will be 1.85mm male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 1.85mm male cable 18 inch length using PE-SR405FL coax.

1 : $181.99
25 : $172.89
50 : $163.79
100 : $156.51

PE3C5331

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. SMA Female to Straight Cut Lead Cable Using PE-P086 Coax., Radio frequency assembly SMA female to straight cut lead cable using PE-P086 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to straight cut lead cable using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and straight cut lead cable connection on the other. Our SMA to straight cut lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to straight cut lead cable is a female to sexless coax assembly, PE3C5331, can also be known as a SMA jack to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to straight cut lead sexless cable assembly PE3C5331 is built with PE-P086 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA female to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5331 can also be used in the other direction and will be straight cut lead sexless to SMA female cable assembly if the opposite connectivity is required. SMA jack to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to straight cut lead cable using PE-P086 coax.

PE3W15331

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C200, RF Cable Type: PE-C200, RF Cable Impedance: 50 Ohm. N Male to BNC Male Right Angle Cable Using PE-C200 Coax. PE3W15331 is a N male to BNC male right angle cable using PE-C200 coax. This Pasternack N male to BNC male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. N to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15331 N male to BNC male right angle cable assembly is constructed with PE-C200 coax.

PE3W25331

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to TNC Female Bulkhead Cable Using RG316 Coax. PE3W25331 is a SMA female bulkhead to TNC female bulkhead cable using RG316 coax. This Pasternack SMA female bulkhead to TNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our female SMA bulkhead to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25331 SMA female bulkhead to TNC female bulkhead cable assembly is constructed with RG316 coax.

TE Connectivity

2-5331272-7

TE Connectivity

SOCKET,MIN-SPR SN-AU SER-2 Socket Length: 3.51 mm Socket Length: .138 in PCB Hole Diameter: .052 in PCB Hole Diameter: 1.32 mm Socket Sleeve Style: Closed Bottom Pin Socket | 3.51 mm .138" .052" 1.32 mm | Part Number: 2-5331272-7 | Internal Number: 2-5331272-7 | TE Connectivity
RoHS : Compliant

1,000 : $0.57
500 : $0.59
250 : $0.61
100 : $0.63
50 : $0.65
1 : $0.71

32,598

160533-1

TE Connectivity

110 FASTON,REC.,20-17 AWG,BR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 17 AWG Wire Size: .5 – 1 mm² Mating Tab Width: 2.8 mm Receptacle Uninsulated 20 – 17 AWG .5 – 1 mm² | Quick Disconnect | Part Number: 160533-1 | Internal Number: 160533-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.17
100 : $0.22
25 : $0.33
10 : $0.37
1 : $0.41

24,089

1-5331677-8

TE Connectivity

SOCKET,MIN-SPR SN-AU SER-3 Socket Length: 3.51 mm Socket Length: .138 in PCB Hole Diameter: .062 in PCB Hole Diameter: 1.57 mm Socket Sleeve Style: Closed Bottom Pin Socket | 3.51 mm .138" .062" 1.57 mm | Part Number: 1-5331677-8 | Internal Number: 1-5331677-8 | TE Connectivity
RoHS : Compliant

1,000 : $0.91
500 : $0.94
250 : $0.97
100 : $1.0
50 : $1.03
1 : $1.13

16,578

3-5331272-5

TE Connectivity

SOCKET,MIN-SPR SN-AU SER-2 Socket Length: 3.51 mm Socket Length: .138 in PCB Hole Diameter: .052 in PCB Hole Diameter: 1.32 mm Socket Sleeve Style: Knockout Bottom Pin Socket | 3.51 mm .138" .052" 1.32 mm | Part Number: 3-5331272-5 | Internal Number: 3-5331272-5 | TE Connectivity
RoHS : Compliant

1,000 : $0.75
500 : $0.77
250 : $0.8
100 : $0.82
50 : $0.85
1 : $0.93

5,654

5406533-1

TE Connectivity

INV MOD JACK,1X1,LED (G/Y) Data Rate: .01 Gb/s .1 Gb/s Modular Jack & Plug Interface Type: RJ45 Port Configuration: Single Port Port Matrix Configuration: 1 x 1 Modular Jacks & Plugs Products: RJ Type Jacks & Plugs 0.01 Gb/s RJ45 Single Port | Rj45 Connector | Part Number: 5406533-1 | Internal Number: 5406533-1 | 1 x 1 | TE Connectivity
RoHS : Compliant

1,000 : $2.47
500 : $2.54
250 : $2.62
100 : $2.71
50 : $2.79
1 : $3.06

1,998

5646533-1

TE Connectivity

2MM HM,TYPE A/B,HDR,ASY,146POS PCB Connector Type: PCB Mount Header Number of Columns: 22 Number of Rows: 7 Backplane Architecture: Traditional Backplane Number of Positions: 146 PCB Mount Header 22 7 Traditional Backplane | Hard Metric Backplane Connector | Part Number: 5646533-1 | Internal Number: 5646533-1 | TE Connectivity
RoHS : Compliant

1,000 : $9.13
500 : $9.39
250 : $9.68
100 : $10.01
50 : $10.3
1 : $11.3

308

1055331-1

TE Connectivity

2098 3251 94 RF Contact Style: Coax Contact Type: Pin Number of Positions: 1 Contact Orientation: Straight Contact Mating Area Plating Material: Gold (Au) Coax Pin 1 Straight | Rf Contact | Part Number: 1055331-1 | Internal Number: 1055331-1 | Alias Number: 2098-3251-94 | Gold (Au) | TE Connectivity
RoHS : Compliant

1,000 : $16.87
500 : $17.35
250 : $17.89
100 : $18.49
50 : $19.03
1 : $20.88

164

776533-1

TE Connectivity

AS16,PLUG ASSY,ST,12P,E SEAL,CODE A Nominal Voltage Architecture: 12 V 24 V 240 V 48 V Number of Positions: 12 Connector & Housing Type: Plug Connector System: Wire-to-Wire Mating Pin Diameter: 1.5 mm Ampseal 16 Connector Plugs - Housing For Female Terminal | 12 V | Part Number: 776533-1 | Internal Number: 776533-1 | Alias Number: AS16-ST-06-12SA-E | 1.5 mm | TE Connectivity
RoHS : Compliant

1 : $4.47

Venkel Ltd.

FBM0805-331P

VENKEL LTD

Multi-Layer Ferrite Bead;0805;330R
RoHS : Compliant

FBC0805-331P

VENKEL LTD

High Current Ferrite Bead;0805;330R
RoHS : Compliant

PHPI120905-331MU

VENKEL LTD

PH Power Inductor;120905;330uH;�20%
RoHS : Not Compliant

5331-R2 Distributor

Link URL