576MHZ-N-R Price, Distributor, Stock

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to SMA Female Bulkhead Low Loss Cable 100 CM Length Using LMR-195 Coax., Radio frequency assembly SMA male to SMA female bulkhead low loss cable 100 cm length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA female bulkhead low loss cable 100 cm length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3C5767-100CM, can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C5767-100CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5767-100CM can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable 100 cm length using LMR-195 coax.

1 : $79.19
25 : $75.23
50 : $71.27
100 : $68.1

1,595

PE3C5767-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Female Bulkhead Low Loss Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly SMA male to SMA female bulkhead low loss cable 12 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA female bulkhead low loss cable 12 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3C5767-12, can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C5767-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5767-12 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable 12 inch length using LMR-195 coax.

1 : $63.19
25 : $60.03
50 : $56.87
100 : $54.34

1,595

PE3C10757-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 1.85mm Male to SSMC Plug Cable 6 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10757-6 1.85mm male to SSMC plug RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to SSMC plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and an SSMC cable connection on the other. Our 1.85mm to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C10757-6 can also be known as a 1.85mm plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to SSMC plug cable has a maximum VSWR of 1.4:1. This PE3C10757-6 1.85mm plug to SSMC male cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to SSMC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10757-6 can also be used in the other direction and will be an SSMC plug to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to SSMC cable assembly for quick shipment worldwide. Variations of 1.85mm and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to SSMC RF cable assembly as per your requirements.

1 : $221.42
10 : $212.56
25 : $203.71
100 : $194.85

PE3W10576/SP2

Pasternack Enterprises

PE3576-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to BNC Female Cable Using RG58 Coax, RoHS in 100CM., Radio frequency assembly SMA male to BNC female cable using RG58 coax, RoHS in 100CM from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to BNC female cable using RG58 coax, RoHS in 100CM, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and female on end 2. This SMA to BNC cable is a male to female coax assembly, PE3576-100CM, can also be known as a SMA plug to BNC jack cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC jack cable assembly PE3576-100CM is built with RG58 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3576-100CM can also be used in the other direction and will be BNC female to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC female cable using RG58 coax, RoHS in 100CM.

1 : $66.39
25 : $63.07
50 : $59.75
100 : $57.1

PE3576LF

Pasternack Enterprises

PE3576-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to BNC Female Cable Using RG58 Coax, RoHS in 12 Inch., Radio frequency assembly SMA male to BNC female cable using RG58 coax, RoHS in 12 inch from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to BNC female cable using RG58 coax, RoHS in 12 inch, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and female on end 2. This SMA to BNC cable is a male to female coax assembly, PE3576-12, can also be known as a SMA plug to BNC jack cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC jack cable assembly PE3576-12 is built with RG58 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3576-12 can also be used in the other direction and will be BNC female to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC female cable using RG58 coax, RoHS in 12 inch.

1 : $63.19
25 : $60.03
50 : $56.87
100 : $54.34

PE3C1576/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Cable 12 Inch Length Using PE-P195 Coax with HeatShrink., Radio frequency assembly SMA male to SMA male cable 12 inch length using PE-P195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 12 inch length using PE-P195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C1576/HS-12 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C1576/HS-12 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 12 inch length using PE-P195 coax with heatshrink.

1 : $90.99
25 : $86.44
50 : $81.89
100 : $78.25

PE3C5769/HS

Pasternack Enterprises

PE3W07576/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to N Female Cable Using LMR-400-UF Coax with HeatShrink. PE3W07576/HS is a TNC male right angle to N female cable using LMR-400-UF coax. This Pasternack TNC male right angle to N female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. TNC right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07576/HS TNC male right angle to N female cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3357-60

Pasternack Enterprises

Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 60 inches. HN Male to HN Male Cable 60 Inch Length Using RG223 Coax., Radio frequency assembly HN male to HN male cable 60 inch length using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. HN male to HN male cable 60 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and HN cable connection on the other. Our HN to HN cable assemblies have a male gender on end 1 and male on end 2. This HN to HN cable is a male to male coax assembly, PE3357-60, can also be known as a HN plug to HN plug cable assembly and will be shipped same-day as it is purchased. HN plug to HN plug cable assembly PE3357-60 is built with RG223 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this HN male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. HN plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to HN male cable 60 inch length using RG223 coax.

1 : $128.99
25 : $122.54
50 : $116.09
100 : $110.93

PE3C3576

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50. TNC Male to Reverse Polarity TNC Female Cable Using RG142 Coax. PE3C3576 is a TNC male to reverse polarity TNC female cable using RG142 coax. This Pasternack TNC male to reverse polarity TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to reverse polarity female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3576 TNC male to TNC reverse polarity female cable assembly is constructed with RG142 coax.

PE3C5576/HS

Pasternack Enterprises

PE3C5576LF

Pasternack Enterprises

PE3W08576-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. MCX Jack to MCX Plug Cable 24 Inch Length Using RG188-DS Coax., Radio frequency assembly MCX jack to MCX plug cable 24 inch length using RG188-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX jack to MCX plug cable 24 inch length using RG188-DS coax, MCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and MCX cable connection on the other. Our MCX to MCX cable assemblies have a jack gender on end 1 and plug on end 2. PE3W08576-24 can also be known as a MCX female to MCX male cable assembly and will be shipped same-day as it is purchased. MCX female to MCX male cable assembly PE3W08576-24 is built with RG188-DS which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to MCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MCX jack to MCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08576-24 can also be used in the other direction and will be MCX plug to MCX jack cable assembly if the opposite connectivity is required. MCX female to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to MCX cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX jack to MCX plug cable 24 inch length using RG188-DS coax.

1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59

Teledyne HiRel

5962-9157602MQA

Teledyne HiRel

MICROCONTROLLER, 8-BIT, WITH 8K BYTES EPROM MEMORY (3.5 TO 16 MHZ)
RoHS : Not Compliant

5962-9157602MMA

Teledyne HiRel

MICROCONTROLLER, 8-BIT, WITH 8K BYTES EPROM MEMORY (3.5 TO 16 MHZ)
RoHS : Not Compliant

Venkel Ltd.

MELFC0102-RE-5760DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�25PPM;576R;�0.5%
RoHS : Compliant

MELFC0204-TC-5763DT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;576K;�0.5%
RoHS : Compliant

MELFC0204-TN-5761CT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�10PPM;5.76K;�0.25%
RoHS : Compliant

MELFC0204-ZC-5763BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�50PPM;576K;�0.1%
RoHS : Compliant

MELFC0207-XC-5762DT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�50PPM;57.6K;�0.5%
RoHS : Compliant

MELFC0207-XE-5760DT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�25PPM;576R;�0.5%
RoHS : Compliant

UPTF0402-16W-N-5760UT

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�10PPM;576R;�0.01%
RoHS : Compliant

UPTF0603-16W-N-5762CT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;57.6K;�0.25%
RoHS : Compliant

UPTF0603-16W-P-5761DT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;5.76K;�0.5%
RoHS : Compliant

UPTF0805-10W-E-5762AT

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�25PPM;57.6K;�0.05%
RoHS : Compliant

UPTF1206-8W-N-5762BT-1K

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;10PPM;57.6K;�0.1%
RoHS : Compliant

UPTF2010-2W-P-5762AT

VENKEL LTD

Ultra Precision Thin Film CR;2010;1/2W;�5PPM;57.6K;�0.05%
RoHS : Compliant

PWCR1206-UK-5764DT

VENKEL LTD

Pulse Withstanding CR;1206;1/3W;�100PPM;5.76M;�0.5%
RoHS : Compliant

PWCR1206-WK-5762DT

VENKEL LTD

Pulse Withstanding CR;1206;3/4W;�100PPM;57.6K;�0.5%
RoHS : Compliant

PWCR2010-WK-5760DT

VENKEL LTD

Pulse Withstanding CR;2010;3/4W;�100PPM;576R;�0.5%
RoHS : Compliant

Vyrian

57604SL001

Alpha Wire

Wire And Cable, 8 Conductor(s), 24AWG, 300V, Flexible Cord And Fixture Wire
RoHS : Compliant

14,972

LTC3576EUFE#PBF

Analog Devices Inc

Power Supply Management Circuit, Adjustable, 1 Channel, CMOS, PQCC38
RoHS : Compliant

11,229

1945766

Phoenix Contact

Strip Terminal Block, 12A
RoHS : Compliant

9,584

1915767

Phoenix Contact

Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s)
RoHS : Compliant

9,312

LT1576CS8-5-PBF

Analog Devices Inc

8,828

LM2576SX-15

Texas Instruments

Switching Regulator/Controller, Voltage-mode, 3A, 63kHz Switching Freq-Max
RoHS : Not Compliant

8,368

SN54ALS576BW

Texas Instruments

Bus Driver, ALS Series, 1-Func, 8-Bit, Inverted Output, TTL, CDFP20

7,910

TAS5760LDDCA

Texas Instruments

Tone Control Circuit, 2 Channel(s)
RoHS : Compliant

7,190

TAS5768MRMTT

Texas Instruments

Audio Amplifier, 50W, 2 Channel(s), 1 Func, PQCC48
RoHS : Compliant

5,696

BCM957608-P1400GDF00

Broadcom Limited

RoHS : Compliant

5,453

SN74ALS576FN3

Texas Instruments

D Flip-Flop, 8-Func, Positive Edge Triggered, TTL, PQCC20
RoHS : Not Compliant

4,435

SN74ALS576NP3

Texas Instruments

D Flip-Flop, 8-Func, Positive Edge Triggered, TTL, PDIP20
RoHS : Not Compliant

3,925

LM2576-ADJMDC

Texas Instruments

Switching Regulator, 3A, 63kHz Switching Freq-Max

3,528

SN74ALS576AN

Texas Instruments

D Flip-Flop, 8-Func, Positive Edge Triggered, TTL, PDIP20
RoHS : Not Compliant

3,470

MX7576KEQP-T

Maxim Integrated Products

ADC, Successive Approximation, 8-Bit, 1 Func, 1 Channel, Parallel, 8 Bits Access, CMOS, PQCC20
RoHS : Not Compliant

331

Waytek, Inc.

157659-10

General Cable Technologies Corporation

6 GA SGX Red Cross-Link Bare Copper Battery Cable -51C to 125C 133/27 Stranding

100 : $1.3615
250 : $1.2298
500 : $1.1127
1,000 : $0.9882

29,750

10757671

Aptiv PLC

Apex 2.8, 3 Way Sealed Female Assembly

1 : $1.5764
50 : $1.5169
100 : $1.4128
200 : $1.2046
500 : $1.1675

3,942

10757690

Aptiv PLC

Apex 2.80 20-18GA Female Term

3,400 : $0.0735
17,000 : $0.0666

3,400

10757690

Aptiv PLC

Apex 2.80 20-18GA Female Term

50 : $0.1943
200 : $0.1871
500 : $0.174
1,000 : $0.155

3,129

157669-11

General Cable Technologies Corporation

6 GA SGX Black Cross-Link Bare Copper Battery Cable -51C to 125C 133/27 Stranding

100 : $1.3615
250 : $1.2298
500 : $1.1127
1,000 : $0.9882

2,100

13576036

Aptiv PLC

Apex 280 10 Position Sealed Female Connector - Light Green

1 : $2.9381
50 : $2.4663
100 : $2.2947
200 : $2.166
500 : $2.0803

1,204

57640 OR 611-064

Ideal Clamp Products Inc

Standard Stainless Steel Band Hose Clamp #64 Band 1/2" 2-1/2" TO 4"

10 : $2.691
50 : $2.239
100 : $2.1099
200 : $1.9913
500 : $1.8945

254

Wuhan P&S

SIR576DP-T1-RE3

Vishay Intertechnologies

N��150 V��D-S��MOSFET
RoHS : Compliant

1 : $5.57
100 : $1.86
500 : $1.72
1,000 : $1.68

45,000

LM2576T-ADJ

HTC Korea

3A,Buck Switch Regulator

1 : $0.57
100 : $0.48
500 : $0.42
1,000 : $0.41

24,000

576MHZ-N-R Distributor

Link URL